SAPscript Graphics : Download

Hi,
Does anyone know of a program or routine to download graphics that are viewable via transaction SE78 ?
We have a graphic that needs some work on it and cannot find anyone to provide the relevant bitmap/TIFF file.
Cheers
Colin.

To the extent i know we can not download the Graphics to the presentation server.You can find any imported graphics in the navigation tree. Before Release 4.6, graphics were stored as standard texts. This is now obsolete. As of Release 4.6, graphics are stored on a document server (the BDS: Business Document Server). In addition to *.TIF graphics, you can now also import *.BMP files and use them in forms.
To display graphics in their original size, use the preview. You can transport graphics directly into other systems from the graphic administration.
One approach that we can follow is take the screen shot of the preview and then paste it in paing and make the required changes and again import it.
Regards,
amit

Similar Messages

Cyrillic characters become garbage in SapScript Graphical Editor

Hello Everyone,
Cyrillic characters become garbage when switching from standard SapScript PC Editor, to SapScript Grahical Editor.
What could be the reason for that?
The logon language is EN, installed code page 1500 for Cyrillic.
Best regards
Max

Cross posts:
/thread/1209675 [original link is broken]
Cyrillic characters become garbage in SapScript Graphical Editor

SAPScript graphic not printing

Hi Folks
I have a problem in a 3.1i system (yes that's right 3.1i - ah those were the days...I remember when..etc).
I have changed a SAPScript layout (just the contents of a text element in the main window) and this works fine. However something is now causing the logo in the header window to not print at all (neither print preview nor hard copy). The standard text is there but I can not get this to print out from SO10 either.
I don't think I have changed anything that could have caused this and it may be coincidence, but does anyone have an idea of what could be causing it?
During testing of this problem, I have created a new layout and included the same logo and other graphics all with no result. I have checked that all graphic are created from Tif files (version 6 no compression).
Now I have run out of ideas...
Thanks in advance.
Nick

Fixed it by uploading the image again. Don't know why it didn't work before but it does now.

In sapscript Graphical PC Editor not work, not save text

Hello Experts.
In SAPScripts the Graphical PC Editor does not work. Previously if it worked, now will not save or update the inserted text
Is there a note to fix it?
I'm Using:
- SAP GUI 7.20 patch level 5
- SAP ECC 6.0 Release 701
- Windows XP Office 2003
Thanks

Thank you very much.
This post really helped me. I solved it.
Thanks Ángel.
Regards.

Sapscript graphic

Dear all,
Some time ago I created a sapscript form in the english language (EN), then I maintained the form in the bulgarian language (BG). A few days ago I was asked to insert the company logo in the form. I did this by creating a graphic window on the form and importing the company logo. My problem is that the logo is printed only when using the english language form (the original one). The following text is created in the graphic window only in the english form: /: BITMAP 'COMPANY_LOGO_COLOR' OBJECT GRAPHICS ID BMAP TYPE BCOL
My question is: How can I copy the same command in the GRAPHIC window (I repeat: in the graphic window, not a text window) for the bulgarian language?
In addition I would like to know as well: How can I insert graphics that will be visible in all languages for the same form? Is there a particular procedure to insert graphics in sapscript forms?
Thank you in advance
George

Hi,
Just now I got the same problem. In my search for a solution I found your question. I suppose your problem has been solved by now, but since the solution was not mentioned: check out
http://www.howforge.com/how-to-insert-graphics-image-bitmap-in-sapscript
You need to perform this action for every language.
This worked for me.
Regards,
Suzy

Business Graphics - Download/Email

Hello,
I would like to download the graph generated using the Graphics FM to presentation server/send the graph as an email attachment. Is there any standard FM to do this. Any input is highly appreciated.
Thank you.

Uma,
I have changed my program to use the IGS Graphs instead of the SAP Business Graphics. The program will now run in the background and you can save the file to the app server, local PC or email the file.
A sample program for the IGS graphics is GRAPHICS_IGS_CE_TEST.
Sample charts can be produced using the SAP Chart Designer. The XML commands generated can be included into the program to produce the desired result. The SAP Chart Designer can be downloaded from the SDN Downloads section.
https://www.sdn.sap.com/irj/sdn/nw-appserver-tools
Regards
Darryl

T Series Internet Graphics Download

Can anyone tell me what I can do to correct a problem where my unit will not fully download the internet graphics? Background graphics and text do not download and often I have to quess where they are located on the websites ?
Solved!
Go to Solution.

That worked like a charm. Thats what happens when you mess around with the settings.thanks for the lesson

Graphics Download

Hi Experts,
                 How to download graphics from SAP to local system? For upload we use RSTXLDMC and se78.
Please guide me.
Thanks in Advance,
P.Ravi Shankar.

REPORT z_download_bds_graphics                 .
* Variable declaration
DATA: v_graphic_size TYPE i,
      v_graphic_xstr TYPE xstring,
      v_graphic_conv TYPE i,
      v_graphic_offs TYPE i,
      v_file         TYPE string.***********************************************************************
* Table declaration
***********************************************************************DATA: BEGIN OF i_graphic_table OCCURS 0,
        line(255) TYPE x,
      END OF i_graphic_table.
* Structure declaration
DATA: st_stxbitmaps       TYPE stxbitmaps.***********************************************************************
* Selection screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_object LIKE st_stxbitmaps-tdobject DEFAULT 'GRAPHICS'
                              MODIF ID abc ,
            p_name   LIKE st_stxbitmaps-tdname,
            p_id     LIKE st_stxbitmaps-tdid DEFAULT 'BMAP'
                              MODIF ID abc ,
            p_type   LIKE st_stxbitmaps-tdbtype,
            p_dir    TYPE localfile.SELECTION-SCREEN END OF BLOCK b1.***********************************************************************
* At Selection-screen output event
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-group1 = 'ABC' .
      screen-input = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.***********************************************************************
* At Selection-screen on value-request event
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dir.
DATA: l_folder TYPE string.
CALL METHOD cl_gui_frontend_services=>directory_browse
    EXPORTING
      window_title         = 'Select Folder'
      initial_folder       = 'C:\'
    CHANGING
      selected_folder      = l_folder
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      OTHERS               = 4. IF sy-subrc = 0.    p_dir = l_folder. ENDIF. ***********************************************************************
* Start-of-selection event
START-OF-SELECTION. st_stxbitmaps-tdobject = p_object.
st_stxbitmaps-tdname = p_name.
st_stxbitmaps-tdid = p_id.
st_stxbitmaps-tdbtype = p_type.* Get the bmp image from BDS in hex string format
CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
    EXPORTING
      p_object       = st_stxbitmaps-tdobject
      p_name         = st_stxbitmaps-tdname
      p_id           = st_stxbitmaps-tdid
      p_btype        = st_stxbitmaps-tdbtype
    RECEIVING
      p_bmp          = v_graphic_xstr
    EXCEPTIONS
      not_found      = 1
      internal_error = 2
      OTHERS         = 3.
IF sy-subrc = 0.*   Find the length of hex string
    v_graphic_size = xstrlen( v_graphic_xstr ).    CHECK v_graphic_size > 0.    v_graphic_conv = v_graphic_size.
    v_graphic_offs = 0.*   Populate internal table from this hex string
    WHILE v_graphic_conv > 255.
      i_graphic_table-line = v_graphic_xstr+v_graphic_offs(255).
      APPEND i_graphic_table.
      v_graphic_offs = v_graphic_offs + 255.
      v_graphic_conv = v_graphic_conv - 255.
    ENDWHILE.   i_graphic_table-line = v_graphic_xstr+v_graphic_offs(v_graphic_conv).
    APPEND i_graphic_table.*   Prepare file name and file path
    CONCATENATE p_dir '\' p_name '.BMP' INTO v_file.*   Download image
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        bin_filesize            = v_graphic_size
        filename                = v_file
        filetype                = 'BIN'
      TABLES
        data_tab                = i_graphic_table
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6
        header_not_allowed      = 7
        separator_not_allowed   = 8
        filesize_not_allowed    = 9
        header_too_long         = 10
        dp_error_create         = 11
        dp_error_send           = 12
        dp_error_write          = 13
        unknown_dp_error        = 14
        access_denied           = 15
        dp_out_of_memory        = 16
        disk_full               = 17
        dp_timeout              = 18
        file_not_found          = 19
        dataprovider_exception = 20
        control_flush_error     = 21
        OTHERS                  = 22.    IF sy-subrc = 0.      WRITE: 'File downloaded successfully'(002).
    ELSE.
      WRITE: 'Error during file download'(003).
    ENDIF.
ELSE.
    CASE sy-subrc.      WHEN 1.
        WRITE: 'Image not found'(004).
      WHEN OTHERS.
        WRITE: 'Error in Image retrieval'(005).
    ENDCASE.
ENDIF.Input:

Download Grphics from SAP

Hi All!
Is ther any program or transaction code which can be used to download the bitmap Graphics present in SAP (SE78)
THanaks in Advance,
Harkamal

hi,
check these threads...
Download Graphics from SAP
Re: SAPscript Graphics : Download
hope this helps,
do reward if it helps,
priya.

Sapscript: position OBJECT GRAPHICS ID

Hi all,
I hope there is someone can help me...
My problem is: i've used the istruction to insert an image in a Sapscript
/: BITMAP 'LOGO_TOPAZIO_DATI1' OBJECT GRAPHICS ID BMAP TYPE BCOL
now, how can i position the image in the centre of page?
Thanks a lots,
regards,
Alex.

Hi,
To print image, you have to import a tif file from your local hardisk via the SAP abap program RSTXLDMC.
In the sap script, add in the following script.
: / INCLUDE ZLOGO OBJECT TEXT ID ST LANGUAGE EN.
or
Tested in 4.6x
Go to transaction SE78.
Follow the path given below (on the left windows box) :-
SAPSCRIPT GRAPHICS --> STORED ON DOCUMENT SERVER --> GRAPHICS --> BMAP
Enter the name of the graphics file on the right side and Go to the menu GRAPHIC --> IMPORT.
Thanks,
Neelima.

I am unable to receive videos or other graphic intensive downloads. I have an iMac with Lion and the latest updates.

I have an iMac with updated Lion OS. Until today I have never had difficulty receiving videos or other intensive graphic downlods. Now, for some unknown reason, I am unable to receive a BMW ebrochure or a see a video from a newsletter site.

How do you "receiving videos or other intensive graphic downloads": in Mail or does you browser not display it?

Printing Logo with Zebra 105SL

Moderator message: Do not offer points
Hi All,
I want to print company logo in the goods label but am unable to do so. I tried using ~DG command in SAPScript for downloading graphics in the zebra printer like:
Format ~DGd:o.x,t,w,data
where data is the HEX representation of the graphic, d = device to store image, o = image name, x = extension, t = total number of bytes in graphic, w = number of bytes per row
The example i tried is:
~DGR:SAMPLE.GRF,00080,010,
FFFFFFFFFFFFFFFFFFFF
8000FFFF0000FFFF0001
8000FFFF0000FFFF0001
8000FFFF0000FFFF0001
FFFF0000FFFF0000FFFF
FFFF0000FFFF0000FFFF
FFFF0000FFFF0000FFFF
FFFFFFFFFFFFFFFFFFFF
^XA
FO20,20XGR:SAMPLE.GRF,1,1^FS
^XZ
But i am getting printer error - out of memory. Can anyone tell me what should i do in this case? How can i increase the printer flash memory size or is there some other way to store the graphic image in printer?
<<text removed>>
Thanks,
Ananya
Edited by: Matt on Nov 19, 2008 2:31 PM

(I'm answering this question for a reference to a problem, with the knowledge that this question may be terribly out of date. But at least this way, the answer to this question is actually answered.)
What you need to do is look into the printers properties and find a tab relating to its configuration and settings. Under there, you'll find 4 buttons. 2 of them were greyed out for me, but the important one, labled something along the lines of "cache" or "memory" (the bottom right if I'm not remembering the label correctly) is what you need to click on. Then flush the printer's cache and reset it's memory.
Be sure to back up any custom/non-default settings it may have, as they might get erased.

Error while uploading *.BMP file using SE78

Hi
I am trying to upload a BMAP file from presentation server onto the document server using SE78.
I am facing an error saying
"This is not a *.BMP file(they begin with <> "BM")"
Message no. TD874
I have the necessary company logo in this file and I want to put this in the sapscript.
Is there some formatting that needs to be done to the bitmap file before importing in SE78.
Please help!
Thanks
Bala

hi
Convert BMP from <b>Command prompt using ren command</b>
then follow below process
Go to transaction SE78.
Follow the path given below (on the left windows box) :-
SAPSCRIPT GRAPHICS --> STORED ON DOCUMENT SERVER --> GRAPHICS --> BMAP
Enter the name of the graphics file on the right side and Go to the menu GRAPHIC --> IMPORT
The program is RSTXLDMC, the logo needs to be save in .TIF format.
Use transaction SE78 to inmport graphics to SAP.
In the form painter, you can either include directly to the form using menu Edit->Graphic->Create or using the INCLUDE statement in a window.
To use an INCLUDE stanment, goto into the woindow script editor and use menu Include->Graphic. The include can look like this for a bitmap:
/: BITMAP MYLOGO OBJECT GRAPHICS ID BMAP TYPE BMON
regards
vinod

Media Encoder saying .mov clip is offline during export whn it isn't

Premiere Pro CC user here. Sorry for the lack of detail. I'm on break at work on a different computer and unable access the project until tonight but need an answer asap.
I'm trying to export a H264 video which renders and plays fine on the timeline in Premiere, only, when I queue the content on Media Encoder, I get a message saying that there is some offline content in the sequence, If I go ahead with the export, the said clip is displayed with a 'Media Offline' card.
The actual clip is .mov lower third graphic downloaded from a graphics site that I've never experienced problems with before and, as I said, it renders and plays fine on the timeline. Premiere never seems to have any problem locating it as it's stored in the same place as everything else. The only indication I have that there's anything at all different about the clip is that it appears purple on the timeline.
This might be something obvious but it's nothing I've ever come across and google isn't yielding any answers so I was hoping somebody might have a solution.

I have the same problem, it happens to me only with mpeg from captured the sony hvr and h.264 in mp4 format. Looks and plays fine in premiere pro, can export straight from premiere but when loaded into AME shows media offline.
Yesterday I tried this and it worked:
deleted media cache both ame and premiere pro
un-ticked "enable native premiere pro sequence import"
closed ame
closed premiere
restarted premiere and sent sequence to ame, everything works fine.
Notice: it only seems to happen when importing a set of large files, and trying to export while premiere is still conforming. maybe.

Duplex Printing (InDesign CS4 v6.0 document from Reader)

I have a 26.55MB PDF file with lots of graphics downloaded from a website and using Reader 9.0. The document was created with InDesign CS4, v6.0. It is set up to print duplex on 8.5 x 11 paper with room for punch holes. I am working with VISTA sp2, 32 bit OS and an HP photosmart 7350 (not equipped with automatic duplex printing, but will duplex manually) with an HP deskjet 5550 print driver. I have two major issues:
1-The pages are designed to print to the edge of the page (color tabs) and my printer designates a print area. Is there any way to change the print area on my printer?
2-The print setup will not recognize the document as double sided when I configure it to print double sided manually. Then I tried printing odd first, then even. It prints every other odd, then when I turn and refeed the document, it prints the other odds. When I select even, it prints every even correctly.
Please help! I need this 864 (432 double) page doc printed asap and trying to avoid printer costs. Also afraid a printer might have the same problem???

Thank you. When I reinstalled InDesign I ticked the box to replace the preferences but the reinstall did not do this. I know now because INDD did not open to that splash window as it did when I followed this tip.
Always the simple solution....
At least I *hope* this is the solution. I have only tried it in one bit which had crashed before. (I'll revisit this list if it does not work)
InDesign was so bad yesterday I was seriously thinking of going back to Quark.

SAPscript Graphics : Download

Similar Messages

Maybe you are looking for