Sapscript transported with SCC1 activated but still old load-version active

Hello all,
i am encountering a weird thing.
A sapscripts has been changed in client 100. Testing must be done in client 200. Client 200 is closed for customizing, abap etc. Activating of the sapscript in client 200 therefor is not possible.
For testing purposes the changed sapscript is transported to client 200 using SCC1. Using SCC1 indicates that the sapscript is changed in client 200. Checking SE71 in client 200 also shows that the sapscript is changed (status: Active - saved).
When testing however still the old version of the sapscript is used. When debugging i can see that an old load is used. So although SE71 (in client 200) indicates that the changed sapscript is activated still an old load-version is used.
Does anyone know what causes this and how it can be fixed ?
Thanks !!!
Ad

Hi,,
These program will help you.
RSTXR3TR - To transport form with transport request - use EXport and import parameters.
RSTXSCRP - To transport form without transport request
RSTXTRANS - To transport standard text
Thanks,
Anitha

Similar Messages

EFI Firmware Update 2.2 but still old firmware version?

Just installed the new firmware update for early 2011 MBP. According to apple I should get a new boot rom version (MBP81.88Z.0047.B1E.1109091244). System Information still shows MBP81.0047.B1E. I wonder if anybody else has experienced the same and of course if the install went through or not. I did not experience any problem during the update. Power was plugged in, everything happend as it should - except for the boot rom version that still says I have 2.1...
Tried the whole process again and now I get the message that I can't run the update on my system...

Has everyone reported this directly to Apple through Feedback?
http://www.apple.com/feedback/macosx.html
I have the same result of Boot ROM version reported in System Info still being the same pre-update. However, I have not experienced any operational problem, so it's "no harm, no foul," except I do not know about Lion Recovery.
I suspect if we all give feedback to Apple they'll figure it out and fix it.
MORE:
Oops. I just went back to the firmware update download page, and the text has been changed to reflect that "Boot ROM Version will be: MBP81.0047.B1E."
So I guess it got noticed.

I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade

I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade . I have tried & tried to pair again & that wont work either , suggesting it is the phones software . Can anyone help please

Hi there soulboycraney,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
-Griff W.

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go.

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information, his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go. Is there any way to eliminate his iCloud account and make mine the primary without rebooting it back to factory settings? There was an update, I believe, that I couldn't install because i didn't have his password that is what made me aware that his acct. was still active. I don't know what to do. Any help is greatly appreciated. Thank you.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

When i tried to text a message from my contact list i received a message saying invalid number of digits. i use the area code with the number but still would not send

When i tried to text a message from my contact list i received a message saying invalid number of digits. i used the area code with the number but still would not send

Call your carrier and see what they suggest.

I want install an old version of itune since the new version does not sync with my iPhone but the old version I installed did not play rather it says that it can't read a file itune library .itl written by Newer version what do Ido

I install an old version of itune since the new version does not sync with my iPhone but the old version I installed did not play rather it says that it can't read a file 'itune library .itl' written by Newer version of itune how do I installed this old version to work

You need to restore the pre-upgrade backup of the library file in the manner shown in Empty/corrupt library after upgrade/crash.
tt2

I renamed my Apple ID with new name but the old password is no more working. What should I do ? After renaming I am getting pop up message regarding icloud on my screen but I am unable to set off the message box now

I renamed my Apple ID with new name but the old password is no more working. What should I do ? After renaming I am getting pop up message regarding icloud on my screen but I am unable to set off the message box now

What to do after you change your Apple ID email address or password - Apple Support
ÇÇÇ

My iPhone 3Gs makes no sound with incoming calls although, it does vibrate? I have tried resetting with various options, but still no joy. Any ideas anybody please?

My iPhone 3Gs makes no sound with incoming calls although, it does vibrate? I have tried resetting with various options, but still no joy. Any ideas anybody please?

Fixed the problem. Got the Iphone 5

Is there a iMovie HD that works with intel processors but still has all the conversion features like iMovie Hd 5.02.(111)

is there a iMovie HD that works with intel processors but still has all the conversion features like iMovie Hd 5.02.(111)

iMovie version 6.

Bought the complete membership, but still in trial version, tried the solutions provided online but...

bought the complete membership, but still in trial version, tried the solutions provided online but I could not find deactivation option/sign out option from clicking Help in the application manager... I even tried uninstall creative cloud manager and all the apps, reinstall and re-sign-in but still couldn't find the corresponding option to click on..
It was not "install" under "find new apps" yesterday right before I paid for the membership, I get it, the system needs time..
I check the application manager and I saw the difference today, but the buttons under "installed apps" did not change, the expiration date is still there!
and.. I have to install everything else in the trial mode! It drove me nuts to read the instructions provided online on how to fix this problem because I did not see the options that are supposed to be there as I followed the steps...
I'm using Mac Pro with OS.X 10.9.5... Help!!

This issues occurs because of the connectivity issue. (You can refer the steps from here : : Sign in, activation, or connection errors | CS5.5 and later)
In a Finder window, choose Go > Go To Folder.
Type /etc.
Select the hosts file and open it.
Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
Search the hosts file for entries that reference activate.adobe.com (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
Save and close the file.
Once you remove all Adobe entries followed by 127.0.0.1 from hosts file.
Sign out and Sign in to the Creative Cloud Desktop App, refer the link for steps : Sign out, Sign in | Creative Cloud Desktop app
Hope this will resolve your issue.
Thank you.

Unable to use free version regardless of browser on any machine. I login with adobe id but then the loading screen just hangs.

Unable to use free version regardless of browser on any machine. I login with adobe id but then the loading screen just hangs. can't get any further - Tried all suggestions like clearing browser caches but no change.
Got a couple of projects i wanted to try this on and if the software works I will probably take a subscription but considering this isn't working at all will look elsewhere.
Also - adobe live chat support is useless.

Hi,
please share the Adobe ID that you are using with DL-AdobeStory-support<at>adobe<dot>com and we will investigate the issue.
Thanks
Aurobinda

First version MacBook Pro, 10.6.8, freezes with pixelated screen. Repaired HD with Disk Utility, but still happens. Temp gague shows max of 51C. Any ideas?

I have the first version MacBook Pro, running 10.6.8 (most current OS that works). It freezes with a pixelated screen. This may not happen for weeks, or it may happen every time i restart. I repaired the hard drive with Disk Utility, but the problem still happens. The temp gague shows a max of 51C. Any ideas on what could be causing this?

I have the first version MacBook Pro, running 10.6.8 (most current OS that works). It freezes with a pixelated screen. This may not happen for weeks, or it may happen every time i restart. I repaired the hard drive with Disk Utility, but the problem still happens. The temp gague shows a max of 51C. Any ideas on what could be causing this?

Camera connection kit works not with iPad 2, but still with iPad 1

Since I have my iPad 2 i can't import my photos by the kit in the iPad 2, but still works on iPad 1.
I don't know why, because no error messages are displayed or something else.
In both cases I used the same accessories (SD-Card) and the iPads are the "big" versions incl. the 3G.
Could anyone can help me?

Try:
1) To restart (reboot) Press and Hold the Home and Power buttons until the Apple Logo appears, about 10
seconds.
2) If that doesn't work, try a reset. To reset go to Settings, General, Reset, Reset.
3) If it's still bad, you can try a restore from within itunes. (Sync first)

I ordered Office 2011 with my MBA, but only the trial version came installed - and no product key was ever emailed to me or included in the shipment. Three calls each to Apple and Microsoft have not solved this.

I ordered Microsoft Office 2011 with my Macbook Air, but only the trial version came installed - and no product key for the full version was ever emailed to me or included in the shipment. Three calls each to Apple and Microsoft have not solved this and I am at wit's end. Each company blames it on the other - I don't care whose fault it is, I just want the product key so I can use Microsoft Office! Please help.

You should have received a DVD in the box (with the MBA).
See: https://discussions.apple.com/message/12805337#12805337
Call AppleCare (they need to send you a DVD, which has the Product Key printed on the sleeve).

Paid for After Effects but still on trial version requesting for serial number

Hi there! I tried to install my subscription of After Effects. I have received an email receipt that my payment is successful. However my After Effects is still on trial version and it kept asking for a serial number. How can I activate my product?

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Sapscript transported with SCC1 activated but still old load-version active

Similar Messages

Maybe you are looking for