Satellite 505d 55965

I have a white screen after clicking the log in button on a Toshiba Satellite L505d-55965 . I need to get photos an documents off it. I can do CTRL+ALT+DELETE to bring up switch user/log off/task manager etc, but when I click any of those options the screen goes white. I can sometimes see my desktop for half a second but usually just white.

Satellite L505D-S5965
I need to get photos an documents off it.
Remove the hard drive, mount it in an external enclosure, and access it from another computer. To remove the hard drive, see steps 6 and 7 here .
-Jerry

Similar Messages

  • Error while creating a support message in satellite system

    Hi,
    I am facing an error while sending a support message to solman form the satellite system
    (( Error Description :  Error in Local Message System: Error when opening
    an RFC connection Message was Not Created ))
    1) I gone through various threads and set the required authorizations like
    SAP_SUPPDESK_CREATE and
    SAP_SV_FDB_NOTIF_BC_ADMIN ,
    SAP_SUPPDESK_ADMIN
    for the user in the solman .
    2) I checked the RFC connection and it is working fine.
    Anyone pls help me to resolve this issue

    hi rohit,
    thanks for u r immmediate response
    do i have to assign the roles to the user in the satellite system or the solman.
    some roles in those 4 roles are not in the satellite system.
    thanks
    Rahul

  • SATELLITE C855D-S5320 Help me please!

    Hi I'm new here, a student, and recently my parents bought me a Toshiba SATELLITE C855D-S5320 for my birthday a month ago from Walmart.com. It runs Windows 8.It worked just fine for 3 weeks until yesterday. 
    Yesterday, I started my laptop and I had to go run an errand. When I came back and restarted the laptop again, this booting message showed up: "CHECKING MEDIA FAIL" then this follows "NO BOOTABLE DEVICE -- PLEASE RESTART THE SYSTEM"
    I don't have any clue about laptops, hard disk drives, recovery disks, etc.  I can't return this laptop to Walmart because it's too late. 15 days have already passed so I can't refund or return it. I don't know what's warranty but I doubt this laptop had it. I looked all over the internet and forums for help. I did try the F12 button to make sure that it is booting from HDD but the laptop still showing the same messages and is not booting up. 
    1. HDD/SSD
    2. USB
    3. ODD
    4. LAN
    I pressed F2 while it powered up and in the Setup Utility, the CPU type, CPU speed, HDD/SSD, ODD,Total Memory Size, System BIOS Version, and EC Version are all in gray text.
    I'm really confused and scared. This is a brand new laptop and I can't return it or refund it. My parents are mad at me because they think I messed it up but I'm telling the truth, I didn't do anything! Our family doesn't have a lot of money and we're going a bit of bad luck nowadays so I really don't want my folks to spend more of their money on me or trouble them more. 
    This is my computer brand: http://us.toshiba.com/computers/laptops/satellite/C850/C855D-S5320/
    I really really appreciate it if anyone can help!

    Hello --
    I'n not really replying but I'm new here and can't figure out how the heck
    else to post a question!
    I also have a C855D-S5320 laptop. Now, when it hibernates and I touch
    a key, it doesn't bring up the log-in screen. It just brings up a blank screen.
    So, I have to use the power key and turn the laptop ALL the way off.
    Once it has been completely turned off it brings up the log-in screen
    and everything is fine.
    I tried removing the battery but that didn't fix it. Other than this issue,
    it works fine, and it's only 3-4 months old. Thanks, if you have any
    ideas!

  • Satellite P300D-10v - Question about warranty

    HI EVERYBODY
    I have these overheating problems with my laptop Satellite P300D-10v.
    I did everything I could do to fix it without any success..
    I get the latest update of the bios from Toshiba. I cleaned my lap with compressed air first and then disassembled it all and cleaned it better.(it was really clean insight though...)
    BUT unfortunately the problem still exists...
    So i made a research on the internet and I found out that most of Toshiba owners have the same exactly problem with their laptop.
    Well i guess this is a Toshiba bug for many years now.
    Its a really nice lap, cool sound (the best in laptop ever) BUT......
    So I wanted to make a question. As i am still under warranty, can i return this laptop and get my money back or change it with a different one????
    If any body knows PLS let me know.
    chears
    Thanks in advance

    Hi
    I have already found you other threads.
    Regarding the warranty question;
    If there is something wrong with the hardware then the ASP in your country should be able to help you.
    The warranty should cover every reparation or replacement.
    But I read that you have disasembled the laptop at your own hand... hmmm if you have disasembled the notebook then your warrany is not valid anymore :(
    I think this should be clear for you that you can lose the warrany if you disasemble the laptop!
    By the way: you have to speak with the notebook dealer where you have purchased this notebook if you want to return the notebook
    The Toshiba ASP can repair and fix the notebook but you will not get money from ASP.
    Greets

  • Portege M800 now is Satellite U400

    After Motherboard Replacement everest for windows reports my M800 as a Satellite U400. Can I modify this ? or i return my laptop to the service center.
    Thanks

    I think the DMI information needs updating. The service center should have done this when the mainboard was replaced, so take it back to them and ask them to update it.

  • Memory upgrade on Satellite A300D-15B

    Hi all,
    I am having upgrading the ram on my laptop from 4gb to 8gb. First I will post the full details of my laptop then explain the problem.
    (Original Configuration)
    Satellite A300D-15B
    Model : PSAKCE
    Bios Ver: 3.30
    AMD Turion X2 Ultra Dual-Core Mobile Processor ZM-86 (Upgraded from ZM-80)
    Genuine Windows Vista Home Premium 32bit
    4096 MB (2048 +2048) PC2-6400 DDR RAM (800MHZ)
    Right then, I installed Windows 7 32bit on it ages ago and upgraded the CPU and have never had any issues as i work with computers.
    I did some checking and found out my Motherboard supports uo to 8gb of ram and decided to buy two 4gb ram modules. I made sure I got the correct ram for my laptop.
    I upgraded the ram and it recognised it without any issue and even stated that 8gb of ram was installed under 'System'in contol panel and in the bios. As it was a 32bit OS it only utilised 3gb of the ram. I then decided to upgrade my OS to Windows 7 Ultimate 64bit and thats when the fun began.
    Basically my laptop will not boot if I have more than 4gb of ram installed (In any configuration) and get a BSOD. I have had a few different Stop Error codes but I cant seem to find a solution. Also there arent any/many options to change in the bios so Im stumped.
    I have tested the ram modules with Memtest several times without error and have also tried them in different laptops without issue. I know my laptop suppors the 8gb as I had no issues running the 32bit OS.
    All my drivers and other software are to date and work fine and have installed all windows updates to date.
    Has anyone else had this issue and is there a patch/fix available?
    Any help, ideas or suggestions are welcome and hopefully I can sort this problem out. Many thanks in advance.
    Melchius

    Hi there,
    The Ram I bought is the correct to the letter and is as follows:
    Komputerbay DDR2 PC2-6400 @ 800Mhz - 2 x4gb modules.
    It has exactly the same Cas latency and timing settings aswell.
    You mentioned that it booted fine in 32bit as it didnt address the full 8gb but now on the 64bit OS I have 1 x 4gb module installed and it is recognised without any issues,.
    If the ram wasnt compatible in any way then I should be getting some errors or something to indicate a problem.
    It also wouldnt boot/run properly with just 1 of the 4gb modules installed on either 32/64bit OS's, which isnt the case at all. I am certain that the ram itself isnt the issue.
    I also tried installing 1 x 2gb and 1 x 4gb module for a total of 6gb and I managed to get windows to load (once) but it then stopped responding. Im not very keen on spending loads of money on another 8gb of ram from Kingston or Crucial if the same thing is going to happen, which I fully expect it will.
    Thanks for the suggestions though, any other ideas?
    Melchius
    Also worth mentioning that the ram that came with the laptop wasnt even Toshiba brand, it is Samsung ram so maybe they should make a list of all the compatible makes for their laptops or maybe not lock their bios's to the point that the end user is so limited.
    +Message was edited by: Melchius+

  • Memory upgrade on a Satellite A100-912

    I own a Satellite a100-912 and I want to upgrade its memory!
    As it seems, this model supports only PC2-4200 DDR2 SODIMM modules (533 Mhz). Before bying a memory module that might regret, I want to know if there will be any compatibility issues if I use to this laptop PC2-6400 DDR2 SODIMM module (800 Mhz).
    Is it going to work even at lower clock speed (533 Mhz) or is it going to be a total waste of money?

    As far as I know the FSB is able to handle 667Mhz modules.
    You can use lower modules (533Mhz) without any problems but modules with higher Mhz will not run with full speed due to the limited FSB.
    So I dont recommend buying 800Mhz modules. Firstly they are not supported and secondly its waste of money!

  • Memory upgrade on Satellite L300

    I purchased a satellite L300 in august 08 in Australia. It came with a single 1Gb memory module which is now inadequate.
    I obtained 2 x 2Gb modules but cannot get it to work with both fitted. Bios reports 4Gb fitted but Vista reboots the first time then blue screens. Ubuntu Linux hangs after loading HAL.
    If only one module fitted it works OK and it does not matter which module is used.
    Any info on this would be most appreciated.

    Hi
    Either the chipset is not able to handle 4GB RAM or there is a compatibility issues between both modules.
    This is nothing unusual and happens very often that both modules cannot work together.
    In your case I recommend testing other modules.
    PS: Be sure that BIOS is up to date... if it's not up to date, then update it and then test both modules again...

  • Memory extension on Satellite P500-1J0

    Hi,
    I have got Satellite P500 1J0. It has 4GB RAM. According to manual it can be extended up to 8 GB.
    What memory modules exactly to buy (brand, specs..etc)?
    Thanks
    Tomas

    You are right. This P500 can be upgraded up to 8GB RAM. You can use two 4GB modules with part number PA3677U-1M4G. Please check this number.
    I strongly recommend you to buy high quality modules. One of the best modules are Kingston modules. For compatible Kingston modules visit this page.

  • Memory expansion on Satellite 2410

    Hi
    I am planning to expand the memory of my Satellite 2410-601. It has 256 MB DDR at present. I am planning on using one more 256 memory module to expand the total memory to 512 MB.
    What I would like to know is whether I can use any of the DDR memory modules available in market? Would there be any compatibility issues?

    Hi
    Do you know this site?
    http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=5548&ft=m&st=3
    Here you can find the details about compatible memory modules for Satellite 2410-601.
    It seems that the notebook is able to handle the 200-Pin PC2100 (266MHz) DDR SODIMM memory modules!!!
    You could upgrade the memory up to max 1GB (2x 512MB)
    >Would there be any compatibility issues?
    Generally you shouldnt have any compatibility issues. Its only important that you use the supported modules.
    Greetings

  • Memory upgrade on Satellite L30

    I have a Satellite L30-11D and I am wanting to upgrade the memory modules in it, I have found this;
    Part Number: PA3411S-2M1G
    1024MB (1GB) Memory PC2-4300 DDR2 (533MHz)
    and it will work but im unsure on this - can you have more than one plugged into my laptop?
    Please help!!!

    Of course you can do more then one memory module. On your Satellite notebook there are two slots available and you can put two memory modules. Your notebook can handle with max 2 GB of RAM.
    According the notebook specification you should have now 512 MB of RAM. New 1GB module put in place where is now placed 512 MB module and old one put into empty slot.
    If you need more assistance please write again.

  • Memory upgrade on Satellite A60-218

    Hi,
    Is it possible to upgrade the memory for the Satellite A60-218 models?
    I've heard that the memory is onboard (internal) and cannot be replaced. Is this true?
    If not, could somebody give me a hint where can I find the memory modules on this model?
    I have tried disassembling it without success.
    Thanks!
    Levente

    Hello
    Just for info: Satellite A60 has 512 MB internal memory and one sot only is available for upgrade. This unit can handle with max 1,5 GB of RAM. On the bottom side in the middle there is placed memory module cover. Remove it and you will find RAM slot.
    For RAM upgrade you can use follow compatible memory modules:
    PC2700 512MB (PA3312U-1M51)
    PC2700 1024MB (PA3313U-1M1G)
    If you have more questions please write again.
    Bye and good luck!

  • How to connect my Satellite A200 with a Philips LCS TV?

    Hi, I have problems to connect my Satellite A200 1E1 with a Philips 32 PF9967D LCD-TV HD ready.
    The manuals recommend a HDMI extension that is unfortunately not availble with my Laptop.
    However, isn't is possible to use a S-Video connection instead? I could accept a reduced quality. When I connect the Laptop with the TV, I have the impression that the Satellite does not send any signal out. The "FN F5" combination does not show the opportunity to switch between the screens. Once I connected a beamer and had no problems at all with switching between beamer, laptop screen or both.
    Any comments would be highly appreciated, thanks a lot in advance.

    Hello
    In user manuals is written in almost each chapter about ports or slots a short comment: depending on configuration. That means that this users manuals can be used for different A200 notebook models.
    Every notebook delivered with HD-DVD optical disc drive has also an HDMI port. According the notebook specification your notebook has no HD-DVD ODD and because of that there is also no HDMI port.
    For TV-out there is sonly one port S-Video. Using this port you can send video signal to your TV. I have LCD TV too and I have used it many times with my A200 notebook. It is very simply but be sure you use the right channel (S-Video) on your TV. Using FN+F5 key combination you can switch to the TV.
    If this does not work you are doing something wrong.

  • How to connect my Satellite A300-1J1 to HD TV

    Hello
    I have a Toshiba laptop model Satellite A300-1J1 (which does not have a HDMi socket) & have just purchased Toshiba XV551D 40" HD tv. Want to be able to connect laptop to tv with the best picture quality possible, would a DVI to HDMI cable be better than the standard 15pin monitor to external monitor/tv cable?
    My laptop has a IEEE1394 socket, i'm presuming this is the same as a DVI socket??? (I could be wrong tho!) Also on reading the tv manual, it says unless I am connecting HDMI to HDMI, I would need a separate audio cable?
    Please advise asap, I'm looking to buy all necessary leads online rather than go shopping so want to make sure I get correct leads from the off.
    And apologies if i sound thick lol.
    Thanks

    HDMI or DVI will be the best quality.
    15pin VGA is analog and has a limited resolution.
    If your TV has speakers, you can simply use HDMI to output the sound to the TV (HDMI includes audio signals).
    If you use DVI, you will need an Audio Cable from the headphone jack on the laptop, to your Speakers/Hifi.
    IEEE1394 or FireWire is not a video connector. It is similar to a USB port, primarily used to transfer video/audio from a camcorder to your PC.

  • Since I installed a printer software Satellite L300 has stopped working

    Hello there!
    I'm new here so not really sure if I'm posting in the right place. Mods, please feel free to move to the relevant section, thank you.
    OK I have a Toshiba Satellite L300 Laptop and ever since I installed a printer software on Wednesday night, my laptop has suddenly stopped working!
    Ever since Thursday night, I have been trying to get it working but I'm faced with this message:
    when i load it up it goes to Windows error recovery:
    'windows has failed to start.a recent hardware or software change might be the cause
    if windows files have been damaged or configured incorrectly,startup repair can help diagnose and fix the problem.if power was interrupted during startup,choose start windows normally'
    then it gives two options: Launch startup repair (recomended)
    start windows normally
    ==========
    -so i click launch startup repair (reccomended)
    -then a scren loads up called 'system recovery options'.. it says: select an operating system to repair and click next.only windows vista operating systems are listed and can be repaired
    if you do not see your operating system listed, click load drivers to load drivers for your hard disks'.....
    but nothing comes up so i click load drivers and it just gives me loads of random folders...and i haven't a clue which ones to load
    ========
    5 years ago Report Abuse
    Additional Details
    so i just click 'next'
    ========
    then i have 5 options:
    -startup repair
    -system restore
    -windows complete pc restore
    -windows memory diagnostic tool
    -command prompt
    ==========
    startup repair says it cannot manually fix any problems
    -system restore just says your computer is in a limited state and performing this action cannot be changed...but there is no option to do so
    -windows comple pc restore says i need to insert a backup disk which I dont have
    windows memory diagnostics tool says that windows is preventing this
    ============
    but on the system resotre it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
    but i don't know where...i typed it in the command prompt but don't understand how to use it
    =========
    i also tried to click start windows normally but it won't work

    If the problem is installed software, start notebook in safe mode and try to start system restore from there.
    Please let me know which options are available. Can you roll back OS few days back?
    Are some restore points listed there?

Maybe you are looking for