Satellite A200-1YU and Pioneer DVR-K17A Firmware Update.

Could you please give me link to the newest firmware for my Pioneer DVR-K17A (Satellite A200-1YU, Catalog Number: PSAE3E-06201RPL), I was looking for it everywhere, but I couldn't find it, please help me.

Visit Toshiba download page under http://eu.computers.toshiba-europe.com > Support & Downloads and check if some firmware updates are available.
If something is offered there you can use it and you will not cancel the warranty.

Similar Messages

Satellite A200-23U - DVD-ROM problem after firmware update

Hi! I have A200-23U (TSSPcorp CDDVDW TS-L632H). I update firmare first to TO02, then to TO03. None errors was shown. After reboot my device is locked (doesn't open/eject by button or by any software) and ImgBurn (for example) can't find any writers. In system devices now it's shown as:
IDE\CDROMTSSTCORP_CDDVDW_TS-L632H________________*BOOT*____\5&1AC5D6C0&0&0.0.0 (I think there must be *TO03* but no *BOOT*)
What's wrong and how can i fix it?
PS Sorry for my bad english .)

I won!! TSL632H_TO??.exe - it's just SFX-archive that can be unpacked by WinRAR (for example). And then we got SFDNWIN.exe program and firmware dump file (*.bin) separately, which can be used to upload firmware without any checks (compatible/non compatible).
*WARNING!!! NO ANY WARRANTIES!!!*

Re: Satellite A200-1AX doesn't boot after BIOS update

Hello all!
I wanted to install XP on a Satellite A200-1AX.
So I tried to update the Bios to the version that supports XP.
When I tried to install it, Vista crashed and now the laptop won't even turn on.
When I keep the power button pressed, the fan wheezes but nothing else happens.
I think the BIOS is gone or corrupted.
What do I do?
Thanks in advance for any help!

> When I keep the power button pressed, the fan wheezes but nothing else happens. I think the BIOS is gone or corrupted. What do I do?
What to say buddy. Looks like something went wrong during the BIOS update procedure Possibly the BIOS was not written correctly and the ROM module must be flashed again using a special procedure and tool.
In such case you can do nothing you have to contact the ASP in your country for a fix!!!
Dont waste a time and ask an authorized service technician for a help.
Good luck and best regards

Help!!!! Update Pioneer DVR-104 Firmware?

My IMAC G4 SuperDrive doesn't like faster (16x) DVD-R's. There is a firmware update on Pioneer's site that addresses something similar- but it's only for Windows.
See here: http://pioneer.jp/oshirase/writer/index-e.html
I found this link for Mac: http://cd-rom.free-driver-download.com/Pioneer/10967/Pioneer-DVR-A04-DVR-104-DVD -RW-RPC-1-Firmware-1.20--For-Mac.html
Should I trust it, and use it?
I've been getting the verification error: OX80020063 using 16x Verbatim DVD-R.
My SuperDrive is currently using firmware revision: A227.

Hi
Never had any problems before when burning CDRs, but tonight the SONY DVD RW DW-U10A superdrive just won't play ball. Tried numerous times to burn some playlists off iTunes and the PC kept going through the initialising process and then spitting the disc out with the message: the attempt to burn a disc failed. The device failed to calibrate the laser power for this media.
Then tried to burn photos in iPhoto and got the message: SONY DVD RW DW-U10A drive failed. The device failed to respond properly, unable to recover or retry.
HELP!! I'm no expert but it sounds serious!! Strange thing is though I can still play CDs and DVDs.
Any ideas??
Cheers
Mark

Satellite A200 - Headphones and microphone not working (Win XP)

I have fully operational Windows XP with everything working just fine. However, today I tried to connect a microphone to the notebook, the software noticed it, muted the internal speakers, but there is no sound in the headphones whatever I do. I tried if the microphone jack is all right only to find out that I have the same problem - the realtek software notices me, that I plugged in a microphone, but doesnt record any sound.
I would be more than grateful for any help.

Are you sure that you have checked all necessary sound settings?
Im not Satellite A200 owner but Ive got a similar Satellite A series and I have installed both OS (Vista & XP) on my HDD.
From my knowledge you have to check different microphone settings in the sound & audio options.
In Control Panel you will find the Sound & audio devices. Choose it!
Then choose the tab called Audio.
There you could find the area Sound recording which provides information about possible devices for sound recording.
First of all you should check if the Volume settings are set to a higher level.
Secondly check if a right device was chosen (in my case its a Realtek HD audio input).
In the other tab Voice (near audio tab) you can test the voice recording too. This could be very helpful to check if the mic functions correctly
Please do this!
Bye

Satellite A200-1NF and Win7 - FN keys are not working

Hello,
I have installed Windows7 32bit on *Toshiba Satellite A200-1NF* (model +PSAE6E-055021FR+), but I have a problem with the combination of the Fn key with the key functions Esc, F1, F2, F3, F4, F5, F6, F7, F8, F9 and F12. No problem with F10 and F11. I read the A200 user's manual without any solution.
Note that I bought Satellite A200-1NF with Windows Vista 32 bit.
Could you help me !
Yassine
Message was edited by: yacbeng1

There is no special instruction:
Using Win 7 the functions keys requires installation of Value Added Package and Flash Card Support Utility. Thats all.
Probably your problem is related to some registry problems. Cannot say for sure.
But you can play a little bit around with the mentioned software.
Uninstall both tools. Then install the display driver.
Clean registry using the CCLeaner. Then reboot several times. Install only VAP just to check the FN key functionality. If it will not be enough, install and Flash Card Support Utility
good luck

Secure link to iTunes store failed and Connection attempt to firmware update server was unsuccessful

Hello everyone, Im facing error with my iTunes. When I run diagnostics i can see "Secure link to iTunes store failed" - please see the image below
Please note: as it is showing secure link to itunes is failed but still i can see iTunes store, but the above error shows when I run diagnostics.
After that when I go through the next and I found the diagnostics report as below, within report i have marked a line with RED colored "Connection attempt to firmware update server unsuccessful". I need HELP!!!!!
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
Gigabyte Technology Co., Ltd. G31M-ES2C
iTunes 11.3.0.54
QuickTime not available
FairPlay 2.6.12
Apple Application Support 3.0.5
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0012B9F0069DE9C0
Current user is an administrator.
The current local date and time is 2014-08-05 01:48:05.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 8400 GS
**** External Plug-ins Information ****
No external plug-ins installed.
The drive G: ZTE USB SCSI CD-ROM Rev 2.31 is a USB 2 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {14DCBC2B-34CB-431B-8625-1E62D7310533}
Description:    WAN (PPP/SLIP) Interface
IP Address:    10.128.133.101
Subnet Mask:    255.255.255.255
Default Gateway:    10.128.133.101
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 06:00:00 1970
Lease Expires:    Thu Jan 01 06:00:00 1970
DNS Servers:    8.8.8.8
        156.154.70.1
Active Connection:    Teletalk
Connected:    Yes
Online:        Yes
Using Modem:    Yes
Using LAN:    No
Using Proxy:    No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-08-04 03:23:27.
**** Device Connectivity Tests ****
iPodService 11.3.0.54 is currently running.
iTunesHelper 11.3.0.54 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Hi msahed,
Welcome to Apple Support Communities.
It sounds like there is an issue with your PC establishing a secure connection to the iTunes Store and the firmware update server. Try following along with the articles below, as they should resolve the issues that you described.
iTunes: About the "A secure network connection could not be established" alert
http://support.apple.com/kb/ts1470
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
I hope this helps.
-Jason

Seems N79, N85 and and 55 30 got Firmware updates

http://www.intomobile.com/2009/12/17/nokia-n79-n85-and-5530-get-firmware-updates.html
Nokia (NYSE: NOK) has released updates for three of its Symbian S60 smartphones. Without further ado, here they are:
Nokia N79 – after the update, the N79’s firmware reaches version 32.001. Details on what’s new are unknown at the stage, as we still haven’t seen the full change log. However, that doesn’t mean you shouldn’t hit the “Update” button – quite the contrary.
Nokia N85 – firmware version jumps to 31.002. According to AllAboutSymbian, this is mostly a bugfix release with tweaks on streaming and naming convention of GMail (Googlemail in the UK and Germany). I’m guessing, the N79 got a pretty much similar update.
Nokia 5530 XM – once updated, the low-end all-touchscreen device’s firmware is in version 20.0.080. The 140MB heavy download updates Nokia’s Ovi apps (Maps, Store), Nokia Music widget, and so on. In addition, it’s fair to add some known bugs are fixed here as well.
As usual, we advise you to backup your device prior to performing any updates, just in case…

The N79 firmware listed there has not been released. It's only presented for a small number of product codes and is likely experimental at Nokia.
Help I'm trapped in a sig factory.

Problem with OS 10.4.1 and EPI 1.1 firmware update

Post updating to 10.4.1 update and the EPI 1.1 firmware update, none of my software (i.e, Word, Nikon Capture NX, and others) will open..
Any solutions? Any similar concerns.

Spoke with Applecare - they could not solve the problem and suggest a reinstall of the operating system that brought life back to normal.

Macbook Pro has short battery life and runs hotter after firmware update

I installed the macbook pro EFI firmware update yesterday and now my MBP runs hotter and the fan starts running earlier than it has ever done before. Also, my battery lasts 51 minutes from a full charge whereas, before the update, it lasted 2 hours (using the same programs and display settings).
Has anybody else seen this problem?
Please tell me I'm not alone with seeing this. I am hoping that there is a solution and it's better than 'buy a new battery'. The fact that my box now runs hotter with the fan on more constantly would not be solved by a new battery I think.

Also had the problem of MBP running much hotter after most recent Firmware update.
My fans have been running at 6k RPM constantly, and processor Temps have been running at 70-88°.
Following the advice in this topic, I checked the Activity Monitor, which told me both my account and my son's account (which was running but had no actual applications running) had separate Airport processes going nuts – each at approx 80-95%!
Switching off airport and logging out of my son's account almost immediately started to cool the processors, and the fans began to slow down. Switching Airport back on doesn't seem to heat things up again, but if I start to crunch numbers, it all happens over again...
So who knows why the firmware update is making these processes freak out.... weird.

What is the purpose and benefit of a firmware update?

Solved!
Go to Solution.

Being able to provide a firmware update to a product is very beneficial. It allows the opportunity to enhance the functionality and operational features of a product, and can also provide service fixes for particular issues.
With the ever-changing advances in technology, updating firmware to gain additional features and capabilities helps prevent a product from becoming obsolete and maintain its competitive value. As new products are released on the market with improved features, firmware updates for existing products may potentially offer the same improved features. Therefore, it may not always be necessary to purchase a new product just to stay up-to-date with current technology.
As mentioned earlier, firmware updates may sometimes also provide service fixes. Updating the firmware yourself may eliminate the need to bring a product into a service center for an expensive repair. Although not every repair issue can be resolved with a firmware update, if one is available for a particular issue, it can save a lot of time and money.

Mifi 4510L Mifi Hotspot...is it the network? and what about the firmware update?

I have spent several months trying to seek a solution on the repeated and frequent disconnects from the Verizon wireless network using my Mifi 4510 L. No success. I have conversed with Verizon Wireless "experts" on this matter and have basically been ignored, since they do not have a solution. It has cost me a pretty penny in wireless costs due to lost connections in downloads, etc...for which I do not get any credit from Verizon on my wireless bill...go figure.
I have even been accused by Verizon that the problem is my computer and hardware, even though I have ran several hardware, software, and "real-life" connection checks on other wireless networks with no issues at all. I even have been getting better connectivity when I use my Verizon USB UML290...but I hate having to switch moving my SIM card from the USB Modem to the MIfi4510L...one of these days the SIM card will fail. Verizon has checked the signal strength at my home and work locations (which I already knew as good), but never heard back from them.
Anyway, I have verified that my wireless network adapter works just fine on other wireless networks (no dropouts, etc). I have even upgraded to another Windows Operating System - Windows 7...which is more superior than Vista in dealing with wireless communications. I have implemented quite a number of the solutions provided by other great Verizon Wireless Community members, but the connectivity problems continue to occur.
When I did a review of my wireless hardware logs, I noticed that when I was encountering problems, the dynamically assigned address given to me on the Verizon Wireless network changed quite a bit, even when I was using the same web site. When my wireless connection worked fine, the dynamically assigned address was consistent. This seemed to change when I encounter peak network load times.
I would appreciate a straight answer from Verizon Wireless on what is going on with the network. I live in a solid 3G coverage area...but just far away from 4G to benefit for the increased throughput. The closest 4G location footprint is about 40 miles away from me.
Finally, what about the Mifi 4510 L firmware update? I have yet to see any notification about this firmware update, either through normal e-mail channels or even through my Mifi configuration site
http://192.168.1.1/mifi.cgi
What gives?
I realize that I am sounding a little perturbed about this matter, but it has been almost 4 months now...and Verizon is not living up to their part of the bargain on providing good tech support on the Mifi 4510L. When they do not have an answer...they ignore the customer. Not good business!!!
Kevin Smith
Metropolis, IL

kescom11 wrote:
Finally, what about the Mifi 4510 L firmware update? I have yet to see any notification about this firmware update, either through normal e-mail channels or even through my Mifi configuration site
The firmware update was released a few weeks ago and there were multiple threads in this forum for it:
Software Update: Verizon Wireless 4G LTE Mobile Hotspot MiFi™ 4510L
The firmware update primarily addresses a problem with the MiFi switching from 3G to 4G and back. I would not expect it to resolve a connection issue for anyone in a 3G only area. Work through the firmware update instructions included in the link above and see if it helps.
There were no email notifications but the MiFi should have been redirecting you to the MiFi homepage every time you tried to browse the internet. The firmware update is mandatory so if you have not already completed the update then there might be something wrong with your device.

Hard drive makes plunking and clicking noises after Firmware Update

My Macbook hard drive worked fine for 9 months until I installed the EFI Firmware Update 1.1 a few months ago. The hard drive then started making plunking or clicking noises every 30 seconds or so, which is beyond annoying. Eventually, I became worried, backed up my data and took it to Apple to get the hard drive replaced. They replaced my 120gb Toshiba drive with a new 120gb Fujitsu drive and it does the same exact thing.
Apparently the plunk is the sound of the drive head parking on the disk. I am now pretty certain nothing is wrong with my hard drives but something was changed during a Firmware or Software Update that tells my hard drive to park the disk head every 30 seconds. Ive found a few other similar cases on the internet. The drive seems to function fine otherwise.
I know two other people with Macbooks and their hard drives don't make the same noise as mine despite having the same drives. Ive tried two hard drives now, Ive tried various power settings, disk utility doesn't find any issues and performance hasn't suffered. Its just an incredibly irritating sound every 30 seconds that is driving me crazy.
I don't want to learn to just deal with it because its annoying and distracting, and is possibly something created from an update.
Anybody have any ideas?
Thanks,
Ed

Hi, welcome to Discussions,
You may have seen some of the various threads about this on this forum. There were many last year (summer 2006) and I've noticed some recently:
http://discussions.apple.com/thread.jspa?messageID=5747020&#5747020
http://discussions.apple.com/thread.jspa?threadID=1226956&tstart=0
None of the threads last year provided any "fixes" as far as I remember, the way people are attempting hacks above.
I had the parking-like sound (never found out if it really was parking) on three consecutive Seagate 80Gb drives in a first generation MacBook Core Duo. It would start after about a day and a half after receiving it, presumably after Spotlight had finished indexing and the drive was then being left idle. The drives were perfect otherwise, and whisper quiet (which made the thunking sound easier to hear). Finally the Apple Store in Brent Cross, London determined that the sound was normal, saying these newfangled smaller SATA drives make such sounds which are normal to their operation. I decided to drop my concern, because the drive (#3!) was working fine.
Your experience is interesting because it seems to relate the offending drive action to the EFI Firmware Update. In my own case my MacBook was replaced last month because of a different issue and the new one (Core 2 Duo – yay!) has a Hitachi 120 Gb which is noisier in general, but no clunks to be noticed yet.
Good luck!
Rhys

Satellite Pro A200 (PSAE4E) Disc Creator error while firmware update

Hi
I get the following errors when trying to update firmware for Disc Creator i am using Windows VIsta Home Premium,
Unexpected error occurred.
Error Code: 32007C-26-00000015
Followed by:
Error Code: 320129-26-00000015 - then application crashes.
Any solutions to this
Thanks

Hi,
A client of mine was getting this on his laptop when he had an encrypted USB thumbdrive plugged in.
If the thumbdrive was disconnected the error went away.
I'm guessing the application is querying all drive letters and perhaps erroring when it can't read the contents of the drive or it doesn't understand the file system.
Try disconnecting any attached devices (inc. printers with card readers) and see if the problem goes away.
HTH
Calogero

Satellite A200-1M8 and second HDD bay

Hallo, i want to install a second internal hdd drive at the hdd2 bay, but when i opened the bay i noticed that there aren't any connectors installed.
So what is the point of a second hdd bay if there are no connectors inside?

Hi,
The point of that bay is, IF you purchase a model with a second HDD equipped then there would be a connector, but if purchased a model with only ONE drive equipped then you just will have one drive since the connector for the second HDD was not soldered on the mainboard of your model type.
Easy and simple. If you want to have a second drive then you will have either:
- solder a connector to the mainboard which causes the revocation of your warranty and does not mean that you can use a second drive since you will need the appropriate BIOS Rom
- purchase a USB-HDD and accept your situation :/
Thats all.
Greets

Satellite A200-1YU and Pioneer DVR-K17A Firmware Update.

Similar Messages

Maybe you are looking for