Satellite A200-27Z - How to unblock KeNotify on Windows Vista?

Hi everyone,
Well, that subject pretty much says it all. I'm doing a cleanup - on my Satellite A200-27Z - and I my Windows Vista keeps blocking KeNotify.exe on startup.
Answers on Google etc. are contradictory - "it's safe!" - "no, don't touch it!" - So, what is the answer with this one? Keep blocking it? I think so; as it as reads keystrokes; which seems a bit unfair as it never told me it was doing it (
What do you all think?
Thanks,
B

Hi
The KeNotify shouldnt be blocked because it belongs to Toshiba Flash Cards that you need for FN keys so please unblock this application.
If the Windows firewall is blocking, you can unblock it in settings:
Control panel > Windows Firewall > Change settings >
I hope I could help you a little bit.

Similar Messages

  • Satellite A200-1DN - How to update BIOS for Windows 7

    I'm running 32bit Windows 7 on a Satellite A200 1DN. I've been having battery problems (plugged in, not charging) and I understand I need to update my BIOS. However I can't find a BIOS update for Windows 7, only Vista and XP.
    Can anyone help? Should I update with the Vista BIOS? Are there any other options for solving this battery problem? I've already tried an ATX reset, and uninstalling the Microsoft ACPI Compliant Control Method Battery.
    Any advice would be very much appreciated.
    Thanks,
    Ian

    Theoretically, you can install Windows Vista to update Bios and return Win 7, then. Before doing, try this:
    Unplug the computer from the AC adapter and turn it on. Let the computer run under battery power until the computer turns off
    Remove the battery pack. Using a soft cloth, wipe off the battery packs connectors and the AC adapters connectors.
    Re-insert the battery pack and plug the computer into the AC adapter
    > I've already tried an ATX reset, and uninstalling the Microsoft ACPI Compliant Control Method Battery.
    by the way, did you have the same issue before installing Win 7?

  • Satellite A200-17O - How to restore Windows to factory settings?

    Hi
    I have a Satellite A200-17O. I want to restore Windows Vista to factory settings, I do not need to back up any files. I do not have the Product Recovery CD. When I press F8 and click the "Repair Computer" option, it will give me all the options, but when I click the option to fully recover the system (the one on the bottom), it will simply open up a window telling me to back up my data, then theres an "OK" button, and when I click that, the window will simply close and go back to the options menu. All I want is to get Vista back to Factory settings.
    Thank you for your help.

    Hello
    Yes, normally you can restore your notebook back to factory settings using the HDD recovery option. Therefore you should follow the instructions here:
    http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
    If it doesnt work you have to use the Toshiba recovery disk. If your notebook didnt come with such a recovery disk you have to create it yourself using preinstalled recovery creator tool. This is mentioned in your user manual, have you checked it?
    Therefore you need some blank DVDs. I would recommend DVD-R from Verbatim or TDK. Many users here have good experience with these brands.
    If you have more questions, just post again! ;)

  • Satellite Pro A200 - Fn keys does not work with Windows Vista

    Hello,
    I own a Satellite Pro A200-PSAE7E and a retail license for Windows Vista Ultimate 32bit (with SP1) installed on it.
    Before installing Vista, I upgraded the BIOS to the most recent version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
    BIOS version is now 2.20-WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]
    After the successful installation of the operating system, I installed the "Value Added Package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) which contains the "Flash Cards Utility". In my understanding, the installation of the "Value Added Package" should enable the Fn keys usage.
    This doesn't seem to be true or not completely true.
    Here is what happens.
    - Before the installation of the "Value Added Package" all the Fn keys didn't work.
    - After the installation of the "Value Added Package", if the TCrdMain.exe process is running, all the Fn keys don't work.
    - If I remove the TCrdMain.exe from the startup and I reboot the PC, only some Fn keys work (Fn+ESC, Fn+F1).
    There is no way (or I didn't find a way) to make all the Fn keys working.
    Does anybody know how to solve this problem?
    Thanx in advance,
    mme000

    I do not know for sure but it can be because of SP1. I have installed Vista Ultimate on A200 and all listed stuff (drivers, tools and utilities) from Toshiba support page.
    Does your installations Vista DVD contains SP1 or you have installed it on your own? If you install Vista Ultimate (without SP1) and all stuff from Toshiba support site following Installations Instructions order.

  • How to install icloud on windows vista?

    how to install icloud on windows vista?

    Use iCloud control panel version 2.1.2 from here: http://support.apple.com/kb/DL1687.

  • How to get icloud on windows vista 32 bit?

    How to get Icloud on Window Vista 32 bit PC?

    Try using the installer from the following download location at Apple:
    iCloud Control Panel 2.1.3 for Windows Vista

  • How can I get a Windows Vista 32 bit version of Photoshop, please?

    How can I get a Windows Vista 32 bit version of Photoshop, please?

    Hi Kevinhannan,
    No current Photoshop supports this configuration.
    Photoshop CS5 was the last version of Photoshop to support Windows Vista.
    Photoshop Elements 12 was the last version of Photoshop Elements to support Vista as well.
    We no longer offer Photoshop CS5 or Elements 12.
    You might look at Amazon to see if you can get either product listed above. Just be careful when purchasing, make sure you know who you're buying from!
    Regards,
    Pete

  • HT5610 How can You authorise your Windows Vista computer??? I do not get this drop down menu nowI cannot get this here, have been trying for hours, why is this so uncooperative? My first impression of I tunes is not so good after that.

    How can you authorise your windows vista computer to play stuff you downloaded from itunes???  I cannot get this drop down menu shown on your support pages whatever I do.    I have been trying for ages.  This is not a good first impression.

    Authorize a Mac or PC
    Review the following before you authorize a computer:
    You can authorize up to five computers with your Apple ID.
    You must authorize your computer to download past purchases, use Home Sharing, or use the Automatic Downloads setting.
    You can play unprotected music that's in the AAC file format without authorizing your computer. This includes iTunes Plus tracks and content  from sources other than the iTunes Store, like your audio CDs.
    To authorize a computer, follow these steps:
    Open iTunes.
    Choose Store > Authorize This Computer from the menu bar.
    You may need to show the menu bar to see this option in Windows.     In earlier versions of iTunes, you can access this option from the Advanced menu.
    Enter your Apple ID and click Authorize.
    If your Apple ID uses an expired MobileMe account, you can still authorize your computer.
    In some cases, iTunes may ask you to authorize the computer again. iTunes should use the same authorization as before if the computer is in your  list of authorized computers.
    Learn what to do if iTunes repeatedly asks you to authorize when you try to play your content.
    http://support.apple.com/kb/ht1420
    Note : If you are Unable to see the Store Tab on your iTunes then click anywhere on your iTunes and press
    Ctrl + B key on your keyboard once and you should be able to see the Store tab in your iTunes.

  • Satellite A210-16G Mass Storage Controller driver for Windows Vista 32-bit

    Hello, I need Toshiba Satellite A210-16G Mass Storage Controller driver for Windows Vista 32-bit. If you have setup file, please redirect me, if you have any other file, please explain me where to install it.

    If I were you I would take look to the Drivers Download site of the Toshiba mainpage, because there you can find everything you need.
    The mass storage controller can either be the HDD controller or the SD-card controller. I would download both of them.
    Heres a direct link to the Drivers page: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    Greets

  • Satellite A200-1N1 - How to activate AGP?

    Help me, please! I speak english very bad.
    My notebook: Toshiba Satellite A200-1N1, OS: Vista
    My problem: when I open program, message shows up: "*WARNING* +The game may not be consistant because AGP is deactivated. Please activate AGP for consistancy+"
    My question: How can I activate AGP?
    I'm looking forward your answer... Thank you.

    I've never heard of "activate AGP" before so as far as I'm concerned if your video drivers are working and you can watch stuff like DVDs etc then AGP is already activated.
    It does sounds like the game you are trying to run isn't compatible with the onboard Intel GMA X3100 which isn't surprising considering Intel do not make powerful gaming cards.
    However double check with the game's manufacturer maybe they have bug fixes or updates for your laptop.
    Richard S.

  • Satellite A200-10X: How to partitioning the HDD

    Hi there guys!
    I have a pro with my satellite A200-10X, it has only one HDD volume, and i want to make them two... and everytime i use the product recovery CD, it formats the HDD... but i do not know how to partition the HDD two get two volume spaces...
    and whats worse is that when i keep on doing that over and over it eats the HDD free space... so how can i partition the HDD and recover the 200GB space the computer originally have?
    i appreciate your help ..
    thanx

    Hello Sherif
    If you use delivered recovery media you have follow options:
    1. the whole HDD capacity can be used for partition C
    2. the HDD capacity can be split and you can create two partitions
    When you use both options Vista will create 1,4 GB partition but this partition will not be visible when you use OS.
    If you want to have two partitions (C and D) start recovery procedure and after choosing the language use SETUP button on the right side. In the middle of the screen occurs small window and there you can set how much capacity should be reserved for partition C. when the recovery procedure is finished and Vista starts open Computer Management.
    On the left side choose Disk Management. After doing this on the left side you will see partition marked as black. This is second partition but still not visible. Click there with right mouse button and choose option to create logical drive. Follow the setup procedure.
    After few steps this partition will be set as logical drive and after formatting it will be visible in Vista Explorer.
    If you have more questions please post again.
    Bye

  • Satellite A200-10Z: How to know if my DVD writer support Labelflash

    Hi,
    I have Toshiba Satellite A200-10Z that came with supermulti DVD writer model HL-DT-ST DVDRAM GSA-T20N, I don't know from which manufacturer this model!!
    Does anyone know if this model support Labelflash?! ?:|

    Googling around I found info that this drive must be from Hitachi. Unfortunately I didnt find any info about Labelflash.

  • Satellite A200-1AE: How to set external monitor as main display on Win XP

    Model: A200-1AE
    OS: XP SP2
    I wish to use the external display in Windows XP. It would be necessary that the external display was the main thing, and desktop expansions occurred on the laptop display. The driver, downloaded from your site do not allow to make it... Though in Windows Vista such possibility is.
    How it is possible to solve my problem?

    Hi
    As far as I know this is not possible. In my case this option is grayed out!!!
    But maybe its possible on your notebook. In such case you should access the graphic card properties. Then go the last tab called Settings.
    There you should mark the display 2 and should enable the option called use this device as the primary monitor.
    But if this option is not available you will be not able to set this!!!!
    Best regards

  • Satellite A200-1Z3 - How can I get Windows 7?

    How can I get Windows 7 CD or exe?
    I am currently using Windows Vista home premium. Can any one give me a link for the same?

    Hi
    Do you really dont know where you can get a Windows 7 CD?
    You can get a CD from every computer shop. Just buy a copy and version that you want and thats all. Insert the CD and then you can upgrade your notebook.
    Sorry, but this questions is really easy to answer.

  • Satellite A200-2BH PSAE6E - Where to find drivers for Vista

    Hi evrerybody
    I have a toshiba Satellite A200-2BH PSAE6E-0HE049FR and i want to download drivers for windows vista.
    Problem: i didn't find it in the download page :s
    Can any one helpe me ??
    I have an othere question how can i upgrade my vista to windows 7??
    thanks

    Hey,
    I did take a picture where you can find the drivers:
    http://img407.imageshack.us/i/a200drivers.jpg/
    > I have an othere question how can i upgrade my vista to windows 7??
    Why it shouldnt be possible?! ;)
    But before you do this you should check if you can get all drivers for it.

Maybe you are looking for

  • Price in the Sales Order

    Dear SD, Normallly we enterd the Price in the Sales Order for a Finished Goods.  Is there any other way, that Sales Order Directly Picks the Cost from Pricing Procedure. REgards

  • Announce Problem - Can't Create Email

    Back in June in the archives there's a note about how to cure "Couldn't create announcement email. iWeb encountered an error while attempting to locate your default email program". Old Toad suggested that deleting both /Users/me/Library/Caches/com.ap

  • Using spry to make divs insisible but they still make 'white space'

    Ive used this tutorial to make buttons that make text appear and disappear with javascript (I dont want the page to reload); http://uk.youtube.com/watch?v=PuOxSeo7qaY My problem is that if the 'Div 2' button is pressed and the 'Div 1' button is not,

  • Java.lang.ClassCastException in EJB's

    Friends Need your suggestions on the following:- 1. try { 2.     InitialContext ctx = new InitialContext(); 3.     Object objref = ctx.lookup("ejb/test/MyTestSessionBean"); 4.     testSessionBean = (MyTestSessionHome) PortableRemoteObject.narrow( 5. 

  • N8 Headphones (still)

    N8 Headphones buttons do not work with these methods - Inserting fast (It used to work but stopped suddenly; I use them everyday) - Inserting fully til you hear the click sound etc.. - Switching the default mode in accessories - Inserting with music