Satellite A300: missing letters while typing fast & noisy fan

Hi
I hope someone might be able to help me.
I have had this laptop for nearly a year and slowly this is driving me mad. I have to type very slowly and deliberately when using IE.
For some reason it doesn't seem to pick evey key stroke up. It is fine when using office apps though. It seems to possibly be linked to the fan being on constantly.
Online games run slowly too.
I have bought an air duster can but not much came out of the fan area, so the fix that everyone keeps suggesting on here for fan issues hasn't helped, the fan is still noisy and it has taken me ages to type this.
Please help me!
Andrea

What plugins are you using in IE? Some plugins/toolbars can drastically affect the performance.
Have you tested it in FireFox or another browser? You can download FireFox from here: http://www.getfirefox.com
Did you install Windows yourself? Or are you using the factory Windows installation?
Maybe you are missing some drivers, for example if you have not installed the correct Graphics Drivers, Windows will run in VGA Mode (software mode), which is very slow.
Have a look in Device Manager for driver problems.
It can also be caused by installed software. Perhaps you have two Antiviruses installed? Maybe you should try backing up your data and running Recovery. That would determine if its a hardware or software problem.
A BIOS Update may also help. You can get the latest BIOS from the Toshiba website in the support section.

Similar Messages

  • Missing letters when typing on Satellite M105

    I am using a Satellite M105-S3084 (Windows XP MCE) and have been unsuccessfully struggling with a keyboard problem since I first bought it. I tend to type fast, especially double letters and find that very often only one of the double letters shows up on screen. For instance "kk" would result in "k" only and similar missing letters even if not doubled. This causes a lot of wasted time correcting what I type.
    I know that there are settings under Control Panel\Keyboard ("repeat delay" and "repeat rate") that permit setting speeds, but I have found them frustrating to use. I've tried both at various settings and still have a problem with missing letters. Maybe I just do not know which way to set which setting and I am just getting frustrated, or there is another setting somewhere else whic I do not know about.
    Have others had this problem with mising letters while typing and found a solution?
    Thanks.

    Hello Jeff
    If I am remembering well there was similar issue with Satellite L10 or L20, I can not remember. This was fixed with new BIOS version. US notebook models are not known to me but if you have time you can check Ask IRIS on US Toshiba page. There you can find many interesting documents.
    Check it under http://askiris.toshiba.com/ToshibaSupportSite/supportcentral/supportcentral.do?id=m1
    Maybe you will be lucky and find something about your issue with keyboard.

  • Keyboard misses letters when typing

    When I am typing on my keyboard that came with my computer, it misses letters.  I type on several other keyboards and they all work fine so I don't think it is my touch.  Had this for 3 months now and Best Buy refuses to take care of the problem for me.  Can anybody help me?

    Hello @BCTVK,
    I understand that you are having issues with your touch keyboard missing letters when typing on your HP  ENVY 23. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Macbook Pro switches order of letters when typing fast

    Attention: If you seem to make more mistakes when typing on a macbook pro, it's probably not your fault. Letters get switched around.
    This is a problem that has been exhibited in macbook pros as early as 2007 and still apparent today. I could never prove for sure it wasn't me making the mistakes, but today I came up with a consistent test case to prove I'm right. Right now using macbook pro retina display. I noticed this today when every time I typed the word "front" it would come out wrong and I'd have to correct it.
    How to reproduce:
    -In an extremely swift, rolling motion (lasting no more than a tenth of a second), type the letters "fron". The left index finger goes on the f, the left middle finger goes on the r, the right ring finger goes on the o, and the right index finger goes on the n. Since all the fingers are different, it is easy to type the 4 letters extremely fast. You might notice that conventionally the left index finger is supposed to type the letter "r", but people who are good at typing always subconsciously make small adjustments to fingering which improve typing speed/efficiency, so this is a common practice. In this case, I always automatically use my left middle finger for the r in "front" without even thinking, because optimization of typing speed has become second-nature to me, just like you would type "lol" with two fingers rather than cumbersomely all 3 letters with the right ring finger.
    -The fingers should all stay on the keys and keep them depressed throughout this 1/10 of a second typing motion; this is very common in fast typing and has never been an issue in other computers (it would be ludicrous to expect fast typers to meticulously lift their finger up after every letter and make sure there were never 2 keys depressed simultaneously. If there is ever any overlap between keys being pressed, the key that was pressed first should appear first on the screen, not randomly jumbled order)
    -You will notice that even though your fingers landed in the order of "fron", what comes out is usually "fnor" or may even be missing some letters.
    -This is reproducible while typing inside any application

    That is normal. You have to keep objects that have magnets out pf the palm rest area of the computer.
    From Apple:
    Macbook Pro goes to sleep when stacked.
    “Placing a device that contains a magnet (such as an iPhone) under your computer or on its palm rests can cause the computer to sleep unexpectedly. This can also appear to cause the computer to have difficulties starting up”.
    http://support.apple.com/kb/TS2917
    Best

  • Q10 double letters while typing

    Good day,
    I presently have a Q10, had it for a little over a year, I was given this by my company in Australia, I presently work in Indonesia but live in Canada. While typing the keyboard has a tendancy to double up on letters, I have noted via the forums that this is a common problem. Now I cannot take the phone back to Australia, not sure I want to turn it in here in Indonesia (I am very far from a large center) but I do live in Canada. If I take this phone to Telus or someone like that will they hounor it and have it repaired, again this is a common problem so obviously a design problem.
    What the heck should I do to get this sorted.
    Thank you for your time
    Dave

    Northsky wrote:
    I am having the same problem with my Q10... it is only a little over a year old as well.  It is an issue that just started maybe a few months ago.  I thought it was something I was doing, but it continues.    I tried looking in the settings to see if t there was something to to adjust the keypad touch settings, but I cannot find it.   I gave up erasing an retyping words with double letters.....  It is driving me crazy!!!!!  
    I am also having an issue with my phone phone restarting if I drop it down on the table (no not dropping it down hard).  I have a hard case on the phone. So it is protected and I don't abuse my phone.  
    I like Blackberry, but I am definitely getting frustrated with this whole thing.  
    I was hoping this latest software upgrade (Feb 2015)  would resolve the problem but it didn't. 
    Hello,
    Given your two symptoms, I would deduce something physical is the problem...a hardware fault, defect, something broken inside, etc. However, hardware problems are of course impossible to truly diagnose at an internet distance...only in person evaluation by a qualified BB hardware technician can provide you with a true diagnosis (and hopefully also a remedy).
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Missing letters when typing-also lack of spaces

    When I type normally, I have dropped or missing letters and missing spaces. I have changed keyboards but it didn't help.   Ths is what it looks like when I type normally. Otherwise, I need t type very sloly and that just doesn't orkfrme.

    It sounds like the Filter Keys function may be turned on. It's an Ease of Access setting that tries to filter out inadvertent key presses. Are you using Windows 7? If so, try this: Click the Start button, and type "ease of access" into the search box. Click Ease of Access Center from the list of results.In the Ease of Access main window, scroll down and click Make the keyboard easier to use.Under Make it easier to type, find Turn on Filter Keys. If the box next to Turn on Filter Keys is checked, un-check it.Click OK.

  • Missing letters when typing-als​o lack of spaces

    When I type normally, I have dropped or missing letters and missing spaces. I have changed keyboards but it didn't help. 
     Ths is what it looks like when I type normally. Otherwise, I need t type very sloly and that just doesn't ork
    frme.

    It sounds like the Filter Keys function may be turned on. It's an Ease of Access setting that tries to filter out inadvertent key presses. Are you using Windows 7? If so, try this:
    Click the Start button, and type "ease of access" into the search box. Click Ease of Access Center from the list of results.
    In the Ease of Access main window, scroll down and click Make the keyboard easier to use.
    Under Make it easier to type, find Turn on Filter Keys. If the box next to Turn on Filter Keys is checked, un-check it.
    Click OK.
    Please click the thumbs up button to say "Thanks!"
    Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
    I am an HP employee.

  • Satellite L450D: erratic cursor while typing

    Hi first post
    I have recently taken delivery of Sat L450, as part of home access for our 11year daughter.
    My problem is that while typing either on or off line the cursor is erratic.
    It can jump into any other line and if you don't watch it constantly, it will screw up what you have typed.
    I just completed a search for drivers and noticed there are two types of topuchpad drivers, so unsure if this would solve the problem or which one. (while typing this post the cursor has jumped back to previous lines 5 times)

    Hi
    Please disable the touchpad while typing using the FN + F9 key combination.
    I had the same issue some years ago and didnt notice that I touched the touchpad surface accidentally while typing!
    I disabled touchpad and it was the solution
    Greets

  • Incorrect letters while typing!

    My BB often will type multiple incorrect characters while I am trying to type!  I have tried everything I can think of!  I have removed the battery, reinstalled the OS, checked the language settings!  What is going on?  The phone has not gotten wet, sometimes it does it, sometimes it doesnt!

    if it's a short word to fix, I usually just double tap it, which selects it, then type it again since typing at that point replaces the selected text. For a longer word, I just find the place just after the typo and backspace it. I'm not sure I understand how a typo could "require" both a backspace and a delete, though, since you can always place the insertion point after the typo. Can you give an example?

  • DELETING LETTERS WHILE TYPING

    If I need to edit an email there is the backspace button, but is there no delete button?? It's annoying to have to scroll to the letter I wish to delete and have to backspace it, especially if the typo requires BOTH backspace and a delete.

    if it's a short word to fix, I usually just double tap it, which selects it, then type it again since typing at that point replaces the selected text. For a longer word, I just find the place just after the typo and backspace it. I'm not sure I understand how a typo could "require" both a backspace and a delete, though, since you can always place the insertion point after the typo. Can you give an example?

  • Extra letters while typing

    Can anyone help me sort this out?
    Ags you can gsee twhen I twype a "t" itw addgs a "w". TWhen I twype a "g" itw addgs a "s", and twhen i twype a "b" itw addgs an "x"
    twhe twhole keybxoard igs affectwed, twhigs igs a run of numbxergs from 1 - 0; 125342567890, 5 and 2 are linked.
    I am gsoings crazy!!! pleagse help
    Jamie

    I too wish there were stores but RIM has made the carrier responible for the service and warranty.
    From what you have described I dont think you can do any more and need a repair done or device replaced.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Satellite A300-1HV: Illumination button doesn't work

    Hi Guys,
    I recently bought a Satellite A300-1HV, and while in the store, the salesman showed me that it was possible to turn off the illumination behind the function/media buttons at the top of the keyboard. He seems to do this by simply pressing the first button (the mute button).
    When I got the machine home I tried this several times, and it did in fact do as I expected (i.e. turned off the illumination). The manual describes the first button as the 'Mute or LED on/off' button. Later that night I tried the button again, but this time it acted like a mute button, and no longer turns off the illumination. Also, the second button (CD/DVD) no longer seems to function at all, although it does light up when pressed.
    I've tried the Toshiba Assist software, and am able to turn off the illumination manually, but the 'Toshiba Button Support' seems to have no affect on either button. I assume that this would allow me to manually configure a program to run when I press one of the two buttons, but no matter what I ask it to run, it does nothing.
    It's like there is some piece of software that should be running, driving the keys, that I do not have (or at least no longer have).
    Any ideas?

    Hi
    You can turn this back on in BIOS.
    You can access this menu by tapping the F2 key while turning the machine on.
    Select the Advanced section and turn Illumination LED on.
    Cheers

  • Satellite P300: cursor jumps to different positions while typing

    Hi All,
    i have a Satellite P300,
    I am having trouble when i type.
    When i am typing using the keyboard, the first couple of words are ok, but then the words start typing in the wrong place, eg back further into the middle of the sentence i am typing.
    Anybody please help? thanks

    Hi dude
    I had a similar issue.
    While typing the cursor jumped to different positions and I was not able to finish one sentence.
    I though there could be something wrong with the keyboard but finally I have notices that I have touched the touchpad surface accidentally while typing ?.
    I have disabled the touchpad using the Fn+F9 and the issues has gone
    So maybe its the same reason for you

  • Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

    Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

    Is your problem due to the keyboard or to NeoOffice Characters? You have to change probably the font. Not all fonts are supporting all Unicode sets. Which font you have in your NeoOffice set to write Tamil? Try with Arial Unicode MS for example.
    Are the letter e-Ex and ai-Ex right in your posting? If they are right, how you inserted these letters in your posting? By copy and paste or by typing? If by typing, your question is related to NeoOffice. Probably you should reinstall or update NeoOffice? Or switch to OpenOffice?
    marek

  • Satellite A100-165; while typing cursor jumps to other location

    Hi,
    When i write with the keyboard sometimes the cursor jumps to another location,
    Just right now it jumped to the "subject" input of the thread.
    It's pretty random where it jumps but very annoying, i am running a Toshiba satellite a100 165;
    Anyone got any ideas what this could be?

    Hi
    I had the same issue
    I didnt notice that I touched the touchpad surface accidently while typing.
    This was the reason why the cursor jumped.
    You can disable the touchpad using the key combination FN+F9
    Furthermore the BIOS update would be advisable too.
    Bye

Maybe you are looking for

  • CRM WEB UI - Time out Pop-up

    Dear All, We have a business requirement to monitor and optimize the CRM WEB UI timeout and other related issues. I would like to have time-out pop-up for the call center agents  and hence they could better manage the sessions . This will avoid loosi

  • Jabber for Windows 10.5.1 not working without elevated permissions

    Customer starts Jabber for Windows 10.5.1 and gets a pop-up about CiscoJabber.exe, wbxcOIEx.exe, and wbxcOIEx64 and to contact WebEx support.  It appears these components are talking to Outlook.  Show connection status under Outlook we see a mapi con

  • Itunes Mac window won't open

    8.2.23 opens with only the menus across the top and a small player that plays only one song at a time. But the File menu has all window choice grayed out. I reinstalled 8.2.23 but it's the same. No library, playlists, radio, iTunes store etc. Any ide

  • Moved some Crystal Reports from 8.5 to 10. They all work except one.

    Moved some Crystal Reports from 8.5 to 10. They all work except one. The report runs, then stops. It brings up the Formula Workshop - Format Formula Editor - Suppress (No Drill-Down) Highlights one of the Formula Fields, which is in used as part of r

  • SAP Basis administrators role on new dimensional products like BW, EP, SRM

    Hello All, I have been working as a SAP basis administrator and still fail to understand what are the main administrative roles as a SAP BASIS administrator on new dimentional products like BW, EP, SRM, MDM etc. aprt from installing them and basic se