Satellite C6070D-10W works pretty slow

TOSHIBA SATELLITE C6070D-10w works pretty slowly.
1) My brand new laptop with factory installed windows 7 and all programs by Toshiba nothing added shows 100% processor usage in task Manager and works pretty slowly. The sum of 80 odd processes shown in task manager never reaches more than 30-50 % but bottom line is always 100%.
2) I upgrade memory + 2 GB so now it's all 4 GB DD3 1333
3) I update new BIOS
4) When is with adapter work CPU with 1500 MHz when i remove adapter cable from laptop is working CPU with 700-750MHZ Tested with CPU-Z
5) I installed new OS installed windows 7 Ultimate Service Pack 1 64 bit + All Drivers for Windows 7 64 bit Sound, chipsed, VGA...... without software Anti virus, disable Microsoft Update I just use Google Chrome when I go to YouTube to see video 360p it's work normal but when I change 480p happen terminated courses 720pHD and 1080pHD interrupted more works pretty slow.
My opinion it's problem with hardware with AMD Processor E-240 APU with AMD Radeon HD 6310 Graphics problem technique from Factory or where is the problem?

Hi
It is not easy to discuss about this theme although you can find numerous threads about similar issues. I would like to have your notebook in front of me, optimize preinstalled OS on my way and check how it works.
In my opinion, best option is usage of original preinstalled OS with specific modification and optimization. Why? Recovery image contains all necessary drivers so hardware will run with full performance. Anything else is individual OS configuration. To be clear, recovery image contains much useless stuff that you can remove from the system; you should also modify start-up option and disable from start all stuff you dont need.
RAM upgrade was very good decision, I just hope you have bought high quality module for upgrade.
When you test video performance try to use high performance power plan.

Similar Messages

Satellite C670D-10W - Task manager shows 100% CPU usage

My brand new laptop with factory installed windows 7 and all programs by Toshiba nothing addded shows 100% processor usage in task Manager and works pretty slow. The sum of 80 odd processes shown in task manager never reaches more than 30-50 % but bottom line is always 100%.
Tried process hacker 2, shows same processes as task manager.
What can be the problem?

If you check this forum you will see that you can find many threads with the same or similar content. Many people have noticed the same after notebook purchase, especially phenomena that notebook is pretty slow. Just without panic. What you must do is to optimize preinstalled operating system.
What can be the problem?
Brand new notebook is preinstalled with original Toshiba recovery image. This recovery image contains operating system, all necessary drivers, different Toshiba specific tools and utilities and some additional software like preinstalled McAffe or Norton antivir.
Many of these tools, utilities and additional software will start with operating system and run in the background. To be honest some of them can be deactivated, some of them can be also removed from the system. By default Windows update is set to automatic so when you go online all available windows updates will be installed automatically in the background and this will happen without your knowledge. This updates installation will make your HDD pretty busy and notebook operations will be slowed down.
I recommend you to change this option and set it to Check for updates but let me choose whether to download and install.....
I hope you understand what I want to say and if you have more questions you are welcome.

Satellite C855d-10W- Cannot install Win7 due to missing ODD

Hello,
I've just bought Toshiba Satellite C855d-10w 2 days ago, but I can't seem to install Windows 7 OS.
It doesn't even want to start, as it shows me that a CD/DVD driver is missing
. I spent the whole night searching for the driver on the internet, both on google and toshiba website, but I can't seem to find any.
I can only find the drivers which I would have installed after the installation of the OS.
Now I am running on Ubuntu, everything works perfectly except the wireless connection (the wireless button is not recognized by the system),
Could you please help me?
Thanks in advance

HI MY FRIEND
what do you mean it won't install windows 7 OS
are you turning the laptop on for the first time, or are you re-installing the windows 7 OS system
have you tried slimdrivers this program is free and it will find out of date or missing drivers
also Secunia psi is free and it will update all your software, i hope you fix your problem
i bought a Toshiba satellite C855D-13N on 28/12/2012 and i had to do a factory reset and it took around 8 hours to complete,
now a few days later i turned the laptop on and it says windows 8 did not shut down prop-ply and it would do a automatic repair and now it is 3 hours later and it is still taking the (mick) i had to change this word from p...
i have had a lenovo laptop and a samsung netbook in the past and both would install windows in around one hour, now this Toshiba thinks time is plentiful if i was running a business i would probably loose it ...

MBP working very slow, rarely displays working wheel

Hi guys,
My MBP is working very slow.
I have taken off AVG, and in my user account I've stopped Soundflower from launching automatically. This seemed to help for a few days, then it's back to dragging.
I used Etre; but don't know the items mean...
Thanks so much in Advance.
EtreCheck version: 1.9.12 (48)
Report generated 16 August 2014 9:28:32 am GMT+7
Hardware Information:
MacBook Pro (13-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.4 (13E28) - Uptime: 16 days 1:7:35
Disk Information:
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (76.15 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Internal Memory Card Reader
Apple Inc. iPhone
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Configuration files:
/etc/sysctl.conf - Exists
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[not loaded] com.sierrawireless.driver.SierraDIPSupport (1.0.0) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (1.0.7) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (1.0.1) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (2.1.1) Support
[not loaded] com.sierrawireless.driver.SierraIPDirect (1.1.1) Support
Problem System Launch Daemons:
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.wdhelper.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.sierrawireless.SWoCTool.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
Launch Agents:
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items:
Dropbox
Google Chrome
Notes
Messages
Calendar
Internet Plug-ins:
Google Earth Web Plug-in: Version: 7.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
OfficeLiveBrowserPlugin: Version: 12.3.1 Support
Silverlight: Version: 3.0.50106.0 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
AdobePDFViewer: Version: 9.5.5 Support
EPPEX Plugin: Version: 3.0.5.0 Support
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 226.37 GB
Destinations:
Data [Network] (Last used)
Total size: 2
Total number of backups: 77
Oldest backup: 2011-12-22 20:28:21 +0000
Last backup: 2014-08-11 11:05:24 +0000
Size of backup disk: Excellent
Backup size 2 > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      4% WindowServer
      2% Image Capture Extension
      1% softwareupdated
      1% systemstatsd
      1% diskimages-helper
Top Processes by Memory:
292 MB Image Capture Extension
98 MB Finder
90 MB iPhoto
78 MB WindowServer
54 MB com.apple.quicklook.satellite
Virtual Memory Information:
21 MB Free RAM
824 MB Active RAM
798 MB Inactive RAM
635 MB Wired RAM
74.58 GB Page-ins
1.59 GB Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path ".+s/Resources" -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press thereturn key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press returnthree times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

BDC Upload program is working very slow

Hello Everyone,
We have created a BDC program to upload GL entries, every monthend my users use this program to upload pending transactions. Initially this program was very good it was processing very fast, from last two three months it is working very slow, even for two entries also it is taking 5 to 10 min.
We are not able to find why this is working like this .
Thanks in advance
Sudheer

Hi Sudheer,
I know it is a pretty late reply, however can you please elaborate how u solved this issue??
Regards
Sushmit

Satellite A660-10W - After Windows 7 installation some unknown devices

So I have the Satellite A660-10W, and I reinstalled the Windows 7 it came with Windows 7 ultimate 64bit. First thing is when I use fn+F6/F7 (other combinations work) for brightness levels it doesn`t work, brightness doesn`t change. And the other thing is that there seem to be some unknown devices.
Here is everything hope someone can think of what could it be, thanks in advance. :)
Link: [http://store.picbg.net/pubpic/B4/3E/3ca598fbde5fb43e.png]

OK you and my friend are right, because I installed the video card drivers from nvidia`s website, not from toshiba, now brightness works :D
And I reinstalled Windows because one thing there were no partitions only one lonely drive and I wanted 30-40gigs for windows and the rest for stuff, not when I decide do reinstall lets say a year later with work and media on it to lose everything. I didn`t do any back ups, even all the shop assistant talked about when I bought it was to buy some dvd`s and backup, but I said I never did that before so why would I need it now, anyway now everything works perfectly, iI`m prepared for the next time :D , thanks for the help. :)

Satellite A200-10W - Where to find Windows 7 64bit drivers?

I have a Satellite A200-10W notebook. In present I have vista x86 installed but I want to upgrade to windows 7 64 bit but I don't know where I find the drivers because on the website I can't find these.
Can anyone help me? How can I use sound card, network card, webcam and others if i haven't these drivers?

Hi!
I have checked the Toshiba page and the Satellite A200-10W belongs to the PSAECE series and therefore I could find only Vista 64bit drivers:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Normally these drivers are also work on Windows 7 so you should try it. Maybe all of them will work and so you have Windows 7 with all drivers. :)

Indesign is pretty slow ..

Hi,
I'm Abhijeet. I am using a MacBook Pro 2.2Ghz i7 late 2011 build 4GB RAM 500GB HDD..running Indesign 5.5 on Mac OSX LION 10.7.4.
My problem is that my indesign is pretty slow ... i am working on a book of around 400 pages which is big...but when i check on activity monitor it shows only around 500MB of RAM is being used by Indesign when i have the project opened...usually i have around 1.5GB RAM free...but still my INdesign is pretty slow...any idea??

Do you have a lot of cross references?
Things that can be done to speed up ID:
Set Live Screen Drawing (in the prefs) to Never or Delayed, turn off Live Preflight, turn off page thumbnails in the Pages panel, open all involved if you use inter-document cross-references.
Make sure you are patched to version 7.5.3, and do a Save As to clear out old change information.

Muse is pretty slow

I use the best equipped and latest 27" imac
but muse is pretty slow.
edit: and in the last 1 hour i had like 5 or 6 zoom-crashes. :-(

Performance is highly dependent on the specific .muse file you.re working on. Its size, complexity and specific content. With a bit more detail about the .muse file you're working on (and/or a link to the URL for the site) we can probably provide some tips for improving performance.
If you have a large image on the page that's cropped on one or more sides, there's a bug within AIR that can result in crashes when zooming in/out. We've made some major changes as part of the upcoming release to address this. Until then you can avoid this crash by pre-sizing and cropped large image that are brought into Muse via File > Place or imported into slideshows outside of Muse. If the image is being used as a Fill image or is not cropped, this bug/crash should not be encountered.
Sorry for the inconvenience. If you'd like to work with the upcoming release, active subscribers who can accept the terms of the Non-disclosure Agreement are invited to join the Adobe Muse Private Beta Program by going to http://museprerelease.com

Satellite A660-10W - Sensitive Arrow Key

I have a Satellite A660-10W running Windows 7 64-bit for about 7 months now. A couple of days ago I noticed that the right arrow key became very sensitive. It feels quite normal just like other keys when pressed and not actually soft to the touch but the slightest touch to the key would cause it to trigger. This a major inconvenience for me since I use it a lot for writing (my work) and using this arrow key now is not accurate at all and it becomes a hassle when I need to use it.
Could anybody help me with this?
Thanks in advance

Hey,
Its not easy to discuss about this behavior and I think this must be checked from a notebook technician if its normal behavior or not. I cant say something about this without seeing it.
Your notebook is only 7 months old so I would contact an authorized service provider in your country. In this case hardware repair is for free so ask the guys for help. They should check your keyboard if it needs replacing or another part.
Do know where you can search for an authorized service provider?
Here you can do it:
http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT
PS: The sensitivity of single keys cant be changed.

Adobe Captivate 6 in Windows XP is working very slow

I am working from a remote location. I have Captivate 6 installed on my machine which Has OS Windows XP. When I record the slides and click end, the Creating Slides pop-up window appears and it takes more than 2 hours to create the slides(even 2-3 slides). when the Captivate project finally opens up, it hangs frequently and I cannot work. Even saving the Project takes an hour or so. Please help me understand why is the software working so slow? Is it not compatible with the OS?

You mention you are working from a remote location. Does this mean that you are trying to work on a Captivate project file that is NOT saved to your local hard drive before you open it?
If so, then that is where your problem lies. Never work on project files stored somewhere on a network. Always copy the working file to your local drive before opening, and always close the file in Captivate before copying it back up to the storage location.

I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from A

I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from Adobe and Windows. I have a new pc with window 8.1.

It could be a coincidence, but I rebooted the machine and (knock on wood) PSE13 seems to be working ok.

Getting S.M.A.R.T. when trying to install Mountain lion. Hard drive works pretty well. I understand that many users have been facing the same issue. Has apple patched it yet?

I'm getting S.M.A.R.T. error when trying to install Mountain lion. Hard drive works pretty well despite the Failing status. I understand that many users have been facing the same issue. My hard drive was/is working perfectly. Has Apple patched it yet?
Has someone found a solution which is not replacing the hard drive which works just fine? Or Is anyone aware of a procedure that can force the installation despite the S.M.A.R.T error? Below details of my hard drive
Thanks
ST31******ASQ:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          ST31000528ASQ
Revision:          AP24
Serial Number:                      6V***5JR
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          7200
Medium Type:          Rotational
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Failing
<Edited By Host>

If you haven't done so, run Disk Utility /Applications/Utilities
to run a live verification.
The drive may be ok at the moment, but that's not to say the drive may fail at anytime.
Hopefully you have all your important data backed up just in case.

The new update 5.0.1 makes myiphone 4s freeze and work very slow..how can I downdrade it to previoys version of sowtware? Or when is it going to be fixed?

Ever since I upgraded my iphone it works very slow and freezes all the time..I cant answer 50% of myy calls because of this , next thing its working just fine..all of my friends who had their phones updates experience the same..can I go back to the previous version of software or when is it going to be fixed?

Ever since I upgraded my iphone it works very slow and freezes all the time..I cant answer 50% of myy calls because of this , next thing its working just fine..all of my friends who had their phones updates experience the same..can I go back to the previous version of software or when is it going to be fixed?

My 2008 macbook keeps freezing and is working incredibly slow!

I've never had a problem with my macbook until recently. It is working much slower than usual and keeps freezing. The beach ball shows up almost constantly. It's incredibly frusterating!
Does anyone know how to fix this??

How about revealing what computer you have and what operating system?

Satellite C6070D-10W works pretty slow

Similar Messages

Maybe you are looking for