Satellite L305D-S5893 Web Cam Help Please?!?!

So I just got this new Satellite L305D-S5893 and it has a web cam but I have NO clue how to use it. I checked the resource guide on how to use it and there's nothing in there.. I looked in my start menu.. under programs and found a "Camera Assistant Software" but that does nothing when I click on it? So can anyone help me and tell me how to use the web cam on this thing? Thanks in advance =D
Solved!
Go to Solution.

When you open the camera assist software it usually hides the program on the left side of the screen. Try moving your mouse around the edges of the screen until it pops up. Or you can look for the utility in the toolbar and click "show toolbar". Then you can click on "start camera".
To make sure the camera is detected you can look in device manager. Look for "Imaging devices" and then make sure it shows Chiconey USB 2.0 camera.
Hope this helps

Similar Messages

Hi, problem occurs when I'm clicking a button or a new url on the current site. For instance, when i clicked that "Ask This" button on this web site, It redirects me to the default homepage. I cant go back and I'm losing the previous web site HELP PLEASE!

Hi, problem occurs when I'm clicking a button or a new url on the current site. For instance, when i clicked that "Ask This" button on this web site, It redirects me to the default homepage. I cant go back and I'm losing the previous web site HELP PLEASE!

Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Bluetooth troubleshooting for toshiba satellite L305D-S5892

i can not get my laptop to sync up with my new cell phone (nokia 7510).
i could get it to sync up with my past cell phones with no problem.
it is not the cell phone, because i can sync it with my husbands phone.
i have tried to install drivers from the toshiba web site(when i do that, it wants me to "plug in bluetooth device and press ok"--well i don't know what that means!! so i plug in the bluetooth usb i have from another software and it doesn't work.)
i tried my bluetooth software with bluetooth usb attachment(IOGEAR model#GBU221) that works with previous cell phones (including my husbands cell phone) and my laptop. i contacted the softwares customer support and they don't know what the problem is!! i still can not get them(my new phone and laptop) to recognize each other.
ANY help would be greatly appreciated!!

Satellite L305D-S5892
That model may or may not have a recovery partition. If Windows runs, you can check it out this way.
1.46GB partition and other small partition are for the System Recovery Options and the factory softw...
Look for a third partition.
-Jerry

Satellite L300-256 - web cam isn't working - Just show Black Colour.

Hello,
i use Toshiba L300-256 model laptop and my web cam was working before some months and today i opened it and it seems to be stopped working.
Its CHICONY USB 2.0 webcam
At first it shows that "some application prevent its working". So i uninstalled all newly installed programs. Then also my webcam didnt work. So i unistalled the driver and installed it again from the driver file downloaded from here. Then also my problem didnt fixed. It just show dark background in the place where image will come while capturing.
Camera blue light is appearing but there isnt any picture coming, eventhough i am in a bright lighted room.
Please help me to fix this issue.
Thanks

Hi
Do you use face recognition utility?
This software locks and use the webcam too
Maybe there is something wrong between these both tools
In your case I recommend uninstalling the face recognition and webcam software.
Clean the registry using CCLeaner (freeware).
Then reboot twice and start with webcam installation then check if the webcam would works

Web cam help....Please!

Hi,
I just bought a Satellite L305D-S5934 laptop and I have no idea how to get the web cam to work. When ever I turn on my computer it says webcam driver open fail. restart computer. I did that and it just says the same thing. I looked in the user guide and it said nothing about this. I unistalled/reinstalled the camera assistance software but still not working. Does anyone know what I can do to fix this?
Thanks
Solved!
Go to Solution.

I have had a heck of a time resolving the webcam driver open fail on startup. I tried to follow Document ID: 98082243 instructions. My Chicony USB 2.0 Camera did not have the yellow exclamation point, but I went on and reinstalled the driver, selecting USB Video Device as suggested in Step 6. Restarted the computer, and still had the same problem.
Went to Yahoo, and did a further search - found that this is an on going problem but found resolution here:
http://laptopexperts.federatedmedia.net/archives/2297
I needed to uninstall the webcam - restarted the computer. No more error message, and I could turn the webcam on - the blue light came on, and I showed up on the screen. Pretty cool - except having my picture on screen.
Hope more of you can find it this easy to fix.
Bonnie

Satellite T130: inbuilt web camera has stopped working

Hi, I have the same problem of the question bellow, like I have looked around and I was not able to find the answer I need.
I have a Satellite T130 and, suddenly, the inbuilt web camera has stopped working properly. A blue light is on, but there is no image. What can I do?
Thank you

Hi,
the blue light is beside the web cam, on the top of screen. But this light is on when I try to use the web cam in anywhere, like Skype, Msn or even in programs in the computer that only take a pictue or make a video of you, without ineternet (I do not know the name of this program). But it seems that computer and the programs recognize the web cam, because there is no messages when I turn on the web cam.
In Skype settings is the same, there is nothing wrong, there is no different message. The only thing is when I try to take picture a message appears: "failed", but the video seems to record normally, although everythng is black.
Could you understand what I meant?
Sorry about my english....

Satellite A505-S6973 Web Cam won't turn off

I recently signed up for Google Chat with the option to use the Video Chat feature. Ever since I can't get the web cam to turn off, even when I'm not even logged on the Internet! I don't like having the little light shining in my face every time I turn on the computer.
How can I turn off the camera when I'm not using it?

If you can get it to boot up again, I'd suggest doing a restore to out-of-box state to see if you have a hardware issue or software. If after restoring it to out-of-box state you are still experiencing problems, it is likely hardware failure (i.e., cpu, hdd, motherboard, etc.).
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Web cam recommendations please

Hi All,
I'd like to get a web cam with microphone for myself (in a low-light house) but also for three others who own pcs. These pc users are elderly with varying degrees of computer savvy. Sigh. This is strictly non-professional. Keeping the grandparents up to date on grand kids development, that sort of thing.
Does anybody have (1) opinions about what I should get for my Mac and (2) what to get these pc users?
Thanks so much.

If you have a Mac with USB 2.0 Ports and running greater than 10.4.9 then any USb camera that is "Vista Certified" or says USB Video Class (UVC) will work without need for extra drivers on the Mac.
If you have only got USB 1.1 ports then get a USB camera that has Mac Drivers and the iUSBCam utility (the page has a link to a camera guide about drivers as well).
The PCs will somewhat depend if they are on Vista or not.
8:34 PM Wednesday; December 10, 2008

Chatting and web cams help!!

my boyfriend doesnt have a mac and wants to get a web cam so we can chat, will any web cam work with my mac?

Your MacBook already has a webcam built-in.
As far as services go, since your boyfriend doesn't have a Mac, I think Skype would be the best choice for cross platform chatting. Or AIM.
Good Luck.
Adam

Problem with Web Host - Help please.

I moved our main site to 'Hostmonster'. Trying to set up
forms.
Some of the forms our non-profit hosts send information from
people with
complaints - to Federal agencies that have a strict criteria
for accepting
email information (must originate from the complainer). We do
this because
some people need help filing complaints with the Fed Govt.
Hostmonster apparently will not send ANY email that does not
originate from
their server. (Must originate from
'[email protected]'.
It is vital that the resulting email 'originate' from the
email address that
the user places in the field I label 'email'.
Worked fine on our previous host but we transferred to
hostmonster for less
expensive cost and additional services [unlimited nr of
domains and
unlimited disk space].
We tried hostmonster because I saw someone in this forum
recommend them.
Please let me know who you recommend and why.
Maybe we can get these recommended hosts listed in one thread
that can be
reverenced in the future?

You have your answer from hostmonster. They want you to
change hosts. You
can easily comply with this, and frankly I would do so.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
<[email protected]> wrote in message
news:C5B36785.23D8B%[email protected]...
> My form collects an email address from the user.
> [ e.g. them@their_address.com ]
> Subject is set by the script "My_subject"
>
> User clicks 'Submit' and the information submitted is
emailed to me per
> the
> formmail.php (aka dbmasters Formmail.php script.)
>
> I expect the resulting email to show up in my email
account as
> Sender: them@their_address.com. Subject: My_Subject.
>
> What I get is:
> Sender: [email protected]
> Subject: My_subject
>
> Note that the actual sender is
'[email protected]'
>
> The US FTC database that some of the forms will send the
email to MUST say
> that the information came from "
them@their_address.com".
>
> I called Hostmonster and was told on the phone that any
email sent out by
> their system must specify that it is sent from a domain
hosted by
> Hostmonster.
>
> Then I got the cryptic email from Hostmonster:
>
> sendmail_path = /usr/sbin/sendmail -t -i -f
[email protected]
> Thank you,
> HostMonster.Com
>
> It looks like someone at Hostmonster was offering
something they thought
> would help - but it was from:
> "HostMonster.Com" <[email protected]>
> So I can't send this question back to the sender and I
don't know what to
> do
> with the information they sent me and I don't know why
they didn't use a
> regular email return address.
>
> We just want to help people who need the help we try to
provide. This is
> usually older people who are being ripped off by crooks.
>
> Thank you for your interest and for any help/insight you
can offer.
>
> Dan H.
>
> On 2/6/09 6:08 PM, in article
[email protected],
> "bregent"
> <[email protected]> wrote:
>
>>> Hostmonster apparently will not send ANY email
that does not originate
>>> from
>>> their server. (Must originate from
>>> '[email protected]'.
>>
>> I'm confused. If you are sending email from a form
hosted on
>> Hostmonster,
>> then
>> the email is originating from their server. Do you
mean that the outgoing
>> email
>> must be populated with an address (From, Replyto,
etc) that is from a
>> hostmonster domain? That doesn't make any sense to
me. Could you explain?
>>
>

Set up initial web page - Help please

I have turned on personal web serving and when I put in the domain name I get the following message:
'Seeing this instead of the website you expected?'
At least I know that Apache is working but *how do I replace this page with my website*?
Please use easy to understand instructions as I am new to the server side!
thank you in anticipation for your help.

Thanks, this has brought up the welcome page but I have a directory problem:
Unless I place a forward slash after a directory name it doesn't recognize it. ( the file within the folder is named index.html ) and returns a can't find message and redirects as examples below:
This doesn't work: www.publici.co.uk/pong and returns the following http://knotset-55.local/pong/
This works: www.publici.co.uk/pong/
Again, thanks for your help
Peter

Aperture to .Mac Web Gallery Help please. Urgent !!

Hi, I having been going round in circles trying to figure this out -
Q1) I cannot find a way to update to my published .Mac web gallery from Aperture(2.1)
When I select the versions that I want to add to the gallery I drag them into the Web
Gallery album in the projects inspector and synchronize the gallery to update, but
only the Master images are added to the published web gallery, not the versions !?
Q2) Also, when I originally created the Web Gallery album Aperture imported my entire
project (All masters, complete stacks, vers etc) but somehow only published the versions
I had selected for publishing to a .Mac Web Gallery. Why has aperture included the Masters,
complete stacks etc in the Web Gallery album ?
If someone could help with this, particularly Q1, it would be much appreciated as I have
a client waiting to see more versions which I cannot manage to add to the existing
published Web Gallery for that client.
Thx

Hi Ernie, thx for responding.
I have tried everything, but same result - Aperture only publishes the unedited Master, not the version with Adjustments. When I originally published images to the .Mac web gallery I disabled all downloads, as the gallery is intended for client review & selection only.
Some further questions if you don't mind.. Am I doing the right thing in dragging versions from the project to the Web Gallery album (in projects inspector)? When I do that I see that Aperture copies both the Master & version to the web gallery album (they are both visible in the web gallery album) The problem is that only the Master is published to the .Mac web gallery (which i don't want), and not the edited Version(which I do want) This worked ok the first time around when I created the web gallery album and published it to .Mac galleries, however I did notice that the web gallery album in Aperture contains the entire contents of the project (Masters, complete stacks & versions etc)
The Aperture manual is very vague on adding new images to a web gallery album and publishing them to an existing >mac Web gallery. It says that this can be done, but not how to do so. I may be missing something simple and obvious, but the Aperture user manual is really not sufficient in this area. Any further ideas or suggestions would be welcome. Thx again.

Lightroom not merging and sorting images from two different cameras - help please !!

Hi guys,
I need some help here. I've just imported a few thousands of images form two different cameras, however Lightroom simply sorts them by camera only. (i.e.. images from the first camera, all sorted by capture time, then come images form the second camera.)
The cameras are the same brand and model, times are synchronised, but the images refuse to merge and sort. I've tried putting them in the same folder and importing, but that doesn't do it either. I've been doing this for years and it all worked fine, till today. Does anyone know whats causing this, and how I can fix it?
Thanks in anticipation.
Latch

Hi John,
View > Sort > Capture Time is checked, The cameras are in sync down to the second, and images from both have been merging and sorting fine for over two years, till today. Sort order is all set to capture time in all modes and views, but its still sorting first by camera.

Cannot use web service help please!!!

Hi all, I need to use a webservice, while adding to my jsc project it shows correctly web service information, here is the result:
Start file:///C:\mag_prova_ser2.wsdl 03/15/2007 11:33:22: Parsing WSDL. Please wait ..WSDL - file:/C:/mag_prova_ser2.wsdl 03/15/2007 11:33:22: Parsing WSDL results: Warning:Processing WS-I non conforming operation "ACCEPT" with RPC-Style and SOAP-encoded Warning:Processing WS-I non conforming operation "EXEC" with RPC-Style and SOAP-encoded Warning:Processing WS-I non conforming operation "LEGGI" with RPC-Style and SOAP-encoded Warning:Processing WS-I non conforming operation "QUIT" with RPC-Style and SOAP-encoded 03/15/2007 11:33:22: Finished parsing WSDL.
when I press add button it returns an error:
03/15/2007 11:38:41: Starting web service client creation... 03/15/2007 11:38:46: Error occurred while creating the proxy! 03/15/2007 11:38:46: warning: Processing WS-I non conforming operation "ACCEPT" with RPC-Style and SOAP-encoded 03/15/2007 11:38:46: warning: Processing WS-I non conforming operation "EXEC" with RPC-Style and SOAP-encoded 03/15/2007 11:38:46: warning: Processing WS-I non conforming operation "LEGGI" with RPC-Style and SOAP-encoded 03/15/2007 11:38:46: warning: Processing WS-I non conforming operation "QUIT" with RPC-Style and SOAP-encoded
here is the wsdl file content:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="MAG_PROVA_SER2"
targetNamespace="urn:uniface:applic:services:MAG_PROVA_SER2"
xmlns:tns="urn:uniface:applic:services:MAG_PROVA_SER2"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap-enc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns="http://schemas.xmlsoap.org/wsdl/">
<message name="ACCEPTRequest"/>
<message name="EXECRequest"/>
<message name="LEGGIRequest">
<part name="M_ARTCOD" type="xsd:string"/>
</message>
<message name="QUITRequest"/>
<message name="ACCEPTResponse">
<part name="return" type="xsd:int"/>
</message>
<message name="EXECResponse">
<part name="return" type="xsd:int"/>
</message>
<message name="LEGGIResponse">
<part name="return" type="xsd:int"/>
<part name="M_ARTDES" type="xsd:string"/>
</message>
<message name="QUITResponse">
<part name="return" type="xsd:int"/>
</message>
<portType name="MAG_PROVA_SER2PortType">
<operation name="ACCEPT">
<input message="tns:ACCEPTRequest"/>
<output message="tns:ACCEPTResponse"/>
</operation>
<operation name="EXEC">
<input message="tns:EXECRequest"/>
<output message="tns:EXECResponse"/>
</operation>
<operation name="LEGGI">
<input message="tns:LEGGIRequest"/>
<output message="tns:LEGGIResponse"/>
</operation>
<operation name="QUIT">
<input message="tns:QUITRequest"/>
<output message="tns:QUITResponse"/>
</operation>
</portType>
<binding name="MAG_PROVA_SER2Binding" type="tns:MAG_PROVA_SER2PortType">
<soap:binding style="rpc"
transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="ACCEPT">
<soap:operation soapAction=""/>
<input>
<soap:body use="encoded"
namespace="urn:uniface:applic:services:MAG_PROVA_SER2"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
<output>
<soap:body use="encoded"
namespace="urn:uniface:applic:services:MAG_PROVA_SER2"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
<operation name="EXEC">
<soap:operation soapAction=""/>
<input>
<soap:body use="encoded"
namespace="urn:uniface:applic:services:MAG_PROVA_SER2"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
<output>
<soap:body use="encoded"
namespace="urn:uniface:applic:services:MAG_PROVA_SER2"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
<operation name="LEGGI">
<soap:operation soapAction=""/>
<input>
<soap:body use="encoded"
namespace="urn:uniface:applic:services:MAG_PROVA_SER2"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
<output>
<soap:body use="encoded"
namespace="urn:uniface:applic:services:MAG_PROVA_SER2"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
<operation name="QUIT">
<soap:operation soapAction=""/>
<input>
<soap:body use="encoded"
namespace="urn:uniface:applic:services:MAG_PROVA_SER2"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
<output>
<soap:body use="encoded"
namespace="urn:uniface:applic:services:MAG_PROVA_SER2"
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
</binding>
<service name="MAG_PROVA_SER2Service">
<port name="MAG_PROVA_SER2" binding="tns:MAG_PROVA_SER2Binding">
<soap:address location="@@UnifaceLocationPlaceholder@@/MAG_PROVA_SER2"/>
</port>
</service>
</definitions>

Solved.
If you are using JBoss.4.2.3.GA - you will need to
* Download the latest commons-discovery.jar file from : http://www.ibiblio.org/maven/commons-discovery/jars
* Copy the JAR file to the following folder:
o For a nonclustered environment:JBOSS_HOME\server\default\lib
o For a clustered environment:JBOSS_HOME\server\all\lib
* Re-start the Application server

Web service help please - client invoking

hi there
can anyone help me on this? i create a client that is going to call a web service. now, i have erro exception saying that javax.xml.rpc.ServiceFactoryImpl can not be found. it happens when the execution reaches
ServiceFactory factory = ServiceFactory.newInstance();
how do i specify where the ServiceFactoryImpl class is? thank you.

thanks for your reply. the following is my code to invoke a web service:
//code................................................
private void sendOrder(String orderid, String message)
throws ClassNotFoundException, SQLException{
// Setup the global JAX-RPC service factory
try{
System.setProperty( "javax.xml.rpc.ServiceFactory",
"com.sun.xml.rpc.client.ServiceFactoryImpl");
// create service factory
ServiceFactory factory = ServiceFactory.newInstance();
// define qnames
String targetNamespace = "http://www.wowgao.com/exchange/server"
+ "wsdl/";
QName serviceName = new QName(targetNamespace,
"WGOrder.WGOrderBean");
QName portName = new QName(targetNamespace,
"WGOrderPort");
QName operationName = new QName("urn:WGOrder", "orderSubmit");
// create service
Service service = factory.createService(serviceName);
// create call
Call call = service.createCall();
// set port and operation name
call.setPortTypeName(portName);
call.setOperationName(operationName);
// add parameters
call.addParameter("BuyerID",
new QName("http://www.w3.org/2001/XMLSchema", "string"),
ParameterMode.IN);
call.addParameter("SellerID",
new QName("http://www.w3.org/2001/XMLSchema", "string"),
ParameterMode.IN);
call.addParameter("order",
new QName("http://www.w3.org/2001/XMLSchema", "string"),
ParameterMode.IN);
call.setReturnType(new QName( "http://www.w3.org/2001/XMLSchema","long") );
// set end point address
call.setTargetEndpointAddress("http://www.xmethods.com:9090/soap");
// invoke the remote web service
String result = (String)call.invoke(operationName, new Object[]{"123","234",message});
how do i set the com.sun.xml.rpc.client.ServiceFactor so that it know where to find the class? you said in the deployment descriptor. do you mean that whoever deploy a web app, it needs to speify this class in the deployment descriptor? i am not sure i understand what you said.

Satellite L305D-S589​3 Web Cam Help Please?!?!

Similar Messages

Maybe you are looking for

Satellite L305D-S5893 Web Cam Help Please?!?!