Save File Path
So while in Premiere Pro CS5.5, I am using the Edit in Audition feature for some audio clips. When Audition launches, I notice that it autosaves the extracted audio file to my harddrive. How can I change the autosave file path for these extracted audio files? Do I change this in Audition or Premiere, and where the heck do I change it?
Thanks.
When you choose "Edit in Adobe Audition" from a clip in the Premiere timeline, it usually performs a Render and Replace operation, extracting the audio stream from the clip and writing it out as a standard WAV file, as you've seen. This ensures your source material is left untouched, since Audition is a destructive editor, as well as preventing any file format compatibility problems that might come up between the applications.
It looks like the default behavior for Premiere is to write this rendered file to the same directory that your Premiere .prproj Project file resides. I didn't see any options in the Preferences that looked like it would allow you to specify a location. I've got a message over to the Premiere team asking for more information.
Similar Messages
-
Hey Everyone,
So I deal with a lot of files each day that need to be saved according to their lead code, meaning that there is a folder that holds thousands of sub folders that have the same name as this lead code on a server.
So since I have the lead code in the file name I'm trying to use that in conjunction with the file path to tell illustrator where to save it with Javascript. Also the idea of a dynamic save path is awesome to me.
Here's what I've got so far, it's not working yet but I feel like I'm close.
Dynamic Save Path////////////////////////////////////////////////////////////////////////////////
#target illustrator
var sourceDoc = app.activeDocument;
var sourceName =sourceDoc.name;
var customerNum = sourceName.substring(0, sourceName.length - 8)
customerNum
sourceName = sourceName.substring(0, sourceName.length - 3)
//alert(sourceName)
alert(customerNum + " Customer # saved")
alert(sourceName + " File name saved") //end
var doc = app.activeDocument;
var doc_Path = File("I:\GRAPHICS"+ "/" + customerNum);
var substituir_Path = doc_Path+ "/" + customerNum;
//alert("sourceName: "+sourceName+"\nsourceDoc_Path: "+doc_Path+"\nsubstituir_Path: "+substituir_Path);
function SaveFileAsFXG (dest) {
if ( app.documents.length > 0 ) {
var saveOptions = new FXGSaveOptions();
var fxgDoc = new File(dest);
app.activeDocument.saveAs( fxgDoc, saveOptions );
var destFilePath = substituir_Path;
SaveFileAsFXG (destFilePath);
alert("done!") //endI figured it out, I had it removing too many characters. I can get away with hardcoding this in my script because of how we name files where I work. also I realized I had a left over part in there that I didn't need.
I also got rid of the dividers to make it easeir to read here online
#target illustrator
var sourceDoc = app.activeDocument;
var sourceName =sourceDoc.name;
var customerNum = sourceName.substring(0, sourceName.length - 7)
customerNum
sourceName = sourceName.substring(0, sourceName.length - 3)
alert(customerNum + " Customer # saved")
alert(sourceName + " File name saved") //end
var doc = app.activeDocument;
var doc_Path = File("I:\GRAPHICS"+ "/" + customerNum);
function SaveFileAsFXG (dest) {
if ( app.documents.length > 0 ) {
var saveOptions = new FXGSaveOptions();
var fxgDoc = new File(dest);
app.activeDocument.saveAs( fxgDoc, saveOptions );
SaveFileAsFXG (doc_Path);
alert("done!") //end -
Set the file path of get image method
I have a program that takes multiple IV curves of some nano-devices and saves each set of the IV curve data into a CSV file. I also have a graph on the main screen that gives me a visual representation of the data after each IV curve is taken.
My program automatically names each IV curve with a different file path and at the end of the program execution I could have 50-60 IV curves. What i'm trying to do is have LabVIEW export an image file of the graph on my front panel and save it with the save file path as the CSV file.
Currently i'm using "Invoke Node -> Export Image" method, which is working fine and doing exactly what I want because i can tell it what file path to save to....however it is just a black and white image.
There is another method that I found here: http://digital.ni.com/public.nsf/allkb/5AE4ADCBB65A6D8F86256FBF007A1AC1
That talks about a "Invoke Node -> Get Image Method" which physically captures the colorful chart on the front panel. However I cannot figure out a way to tell it the file path to save to. So when I run my program, after each IV curve, it takes the image from the front panel and then on the next IV curve, it interrupts my program to ask me to overwrite the previous file because it's using the same name.
Is there a way to tell the Get Image Method to save to a specific file path?Hi Puneet_K,
Thanks for the code....I didn't know you could wire the output of the image data to a write VI. It makes sense in theory and i thought it would work....but it's not actually writing the PNG. I even tried BMP and JPEG but no results.
I'm posting an image of my code with the before and after. The before uses export image and it works, the after uses the get image and it doesn't create the file.
Attachments:
before.PNG 71 KB
after.PNG 71 KB -
Saving file paths (like a bookmark gets saved?)
i seem to be doing a lot of restoring of data (for instance i had to restore my notes recently) and i am realizing that it would be uber helpful to be able to save file paths. right now i highlight the folder that i need, then i hightlight the one above it and then again the one above that until i get to the library level where i will see it easily.
is there some utility of function that would let me save all my important file paths instead of having to do this/
TIAYou would want to create aliases for your file paths. right click the folder choose create alias, then drag all the aliases into a new folder you titled Paths. drag the paths folder into your sidebar.
Another option is to keep your file paths in notes or whatever text editor you choose.
then copy and paste them into the "go" field
when in finder hit shift+cmd+G and the GO menu should pop up.
paste the file path from your notes into that field and you're there instantly. -
Search c:\ drive and return file path for winword.exe and save as variable
Hi all, here is what I'm trying to do;
1. Search C:\ drive for winword.exe
2. take the file path and save it as a variable.
3. Then based on the path value, use the switch statement to run "some command"
Essentially I'm trying to find what the file path for winword.exe is, then run a command to modify the registry. I already have the script that will modify the registry like I want but the problem it, the path is hard coded in the script, I want to
now look for all versions of word and set the right file path so I can make the right registry changes.This should get you started:
http://ss64.com/ps/get-childitem.html
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
Path does not exit - While trying to save file on SharPoint Server 2013 from client machine
Hi,
I have installed Microsoft SharePoint Server 2013 Enterprise Edition on my testing Lab environment (On VM Workstation 10) on Windows Server 2012 with SQL server 2012, I can access all files stored at SharePoint Server from any physical machine, I can share
a single file among different people to work simultaneously, but here i stuck on saving any file from client machine to directly on SharePoint Server, Attached is the snap shot, whenever I try to save any file directly It says Path Does Not Exist, If I drag
and drop any file directly to SharePoint I do not see any error message.
I read from different posts that I need to Enable Desktop Experience Feature on Server 2012, which I installed but no positive result gained :(
I will appreciate for any possible help?
AliHi Ali,
Please try disabling the protected view per the link below and test the issue again:
http://social.technet.microsoft.com/Forums/en-US/b8381a19-3394-406f-8adb-1976f45460ef/path-does-not-exit-while-trying-to-save-file-on-sharpoint-server-2013-from-client-machine?forum=sharepointgeneral
You could simply type the url as http://sp/sites/sitename in the Filename place.
Regards,
Rebecca Tu
TechNet Community Support -
How to set default file path for save
Hello all,
I'm currently blocked on the below issue and is hoping to gain your help and insights.
We have recently upgraded to InDesign CS6. Now when an INDD file created in an older version of INDD is opened in CS6, all the save dialogs would not default to the location of the original INDD file. Though if the same file is opened in the version of InDesign that created it, the save dialog goes to the proper location by default.
Debugged using our custom plugin as a gate way, and found out that after InDesign CS6 performed the document upgrade/convert, the database for the converted document loses file information. i.e. IDataBase::GetSysFile() returns nil. I think we can figure out some way to get the original file path. For example, we can intercept "kAfterOpenDocSignalResponderService", and get the original file path of the opened file from IDocumentSignalData. Though I haven't yet able to figure out a safe way to set this file path to the document, so that the save dialogs would by default point at this path.
Utils<Facade::IWorkgroupFacade>()->InitDocumentAssetManagement(docRef, filePath) seems to do the right thing, but it seems to be quite intruding, and I'm afraid that it is overkilling and will cause bad side effect for the use case I'm looking for.
So I'm wondering if anyone has any suggestions to achieve this without implementing/overriding the file save dialog.
Thanks.
-JeffYou should be able to avoid writing your own open-doc trap by using kDocBoss's IOpenedFileInfo to obtain the original file's path. It seems fairly reliable; the only time I've seen it come up empty is for an opened QuarkXPress document.
I'm afraid I don't know of a sanctioned way to change IDataBase::GetSysFile() without going through the database's SaveAs machinery. Overriding this behavior might only be possible by replacing the regular Save dialog with your own.
But if InitDocumentAssetManagement() is helping, maybe the workgroup/asset management approach is worth pursuing. Have you tried spying on that call in the debug app? You might be able to isolate and use one of the commands that it's invoking (IAMSPManager::BindAsset() / kSetAssetAttributesCmdBoss?) without all of the side-effects of the higher-level call. -
Full file path in Office 2007 when open or save
Am not sure i can raise this question here.
We are using 10gR2 Application server and Windows 7 as a Client. In the client machine we have installed the Microsoft Office 2007.
From the forms we are trying to open and save (after changes) the files of format Doc/Xls. These files will be stored in separate shared folder accessible through Application server and client.
Now the issue is when we open/save the file it shows the Entire path (In Saving Window) which should not happen. In previous release of MS office its not like this.
Please help us "to hide the file path to be displayed to the user". Like changing the registry for Office 2007 or workarounds or new solutions or any other oracle's product.
Note : Showing the file name is the Office 2007s default behavior.The only way to avoid showing this from a Forms point of view would be to not display the open/save file dialog in the first place. In other words, control the opening and saving using your own custom dialogs. Also, be aware that using remote drives (network mapped) may cause problems. Generally speaking, doing this would not be considered supported.
As for opening documents on the client, there is no need to use the open file dialog if you know the file name and path to that file in advance. You can simply use WebUtil's CLIENT_HOST. So let's say you wanted to open a file named mySales.doc and you knew its location, all you would need to do is this:
Declare
my_cmd varchar2(255);
Begin
my_cmd := 'rundll32 shell32,ShellExec_RunDLL '|| :t1;
CLIENT_HOST(my_cmd);
End;In the above example, +:t1+ is a text field on a canvas. The value would include the path and file name to be opened. Of course this could be a pl/sql variable which you programatically populate or any combination of that. The value value must include the full path (with drive letter) and full file name. If the path or name contains spaces, double quotes may likely be necessary. You will have to test.
For saving an opened file, you are mostly out of luck from Forms unless you took control of Word/Excel as it was being opened in the first place. For example you likely can open the Office products using OLE or VB or other macro and control what the open and file save dialogs look like or if they are even accessible at all. But this has nothing to do with Oracle or specifically Forms.
You need to refer to the MS documentation. -
Again, another odd operation that Adobe has added to Acrobat Professional DC for Mac. When I Save, or Save As in Acrobat DC, the next window is an Adobe Save As PDF window with several, helpful options. There is a list of five or so Recently Visited folder, options in the sidebar to send this to a Cloud and a giant button "Choose a Different Folder". This button is so large, I actually, have trouble locating it.
Usually, I'm working in a current document and the folder I wish to save that document to, percolates to the top of the Recent Folders. That's handy. However, when you click that selection, actually any selection, even Choose a Different Folder, the OS X Finder window always opens up to the same folder. The folder is named, simply "T" for temporary. If you save anything there, and close Acrobat, you have lost your work my friend. I have figured that out, now. But my question is, why ask where my destination folder of choice, if you never locate it anyway? That window is a waste of space.
This is obviously a bug between the new DC version and the Mac Finder system. The action in the Save As PDF window need to have the file paths updated.Hi
I accessed to a website from my uni library computer using my student account and download a pdf file in there. However, that pdf file contains a line of words saying "Accessed by ... University Library on 30 Mar 2007". This line is printed vertically and on the left side of the page.
Do you know how to remove that line? I think the website just embedded that line into the file.
Please help.
Thank you very much.
tuanduy -
Save as local file path is greyed out for certain t.codes
Hi All,
After the ECC upgrdation, Save as local file path is greyed out for certain t.codes, while for other excel file export is not automatic.
ES. for MB51 Transaction, when I try
Path to save as local file is " System>LIST>Save---> Local file and I choose format Spreadsheet it appears format file txt, while with old release was XLS.
ThanksI would like to known if the Additional Data button in MM02 should be custom. Us not possible to use standard?.
Suggest to open a new thread for your query related to MM02
Regards,
Nick Loy -
File path recorded with "Save As" Action is fixed?
I am trying to create an action that will save the open file to a JPG (Quality 9, Matte: None), always in the same folder that it came from, as it does when this is performed manually. (The preference to Save As to the Original Folder is enabled).
What I am finding is that when the action is recorded, the path to the folder at the time is fixed in the action, effectively rendering it useless for further saves of files opened in different folders.
Is it possible not to save a path when recording the Save As action or make it variable so that adopts the folder that would have been chosen had the command been invoked manually?
TIA, Joel.
Photoshop Mac CS5
Mac OS X 10.6.4
MacBook Pro 17" 2.4GHz/4GB/320GBSo it looks like PS cannot automate a manual process in this case though it would be very desirable for it to do so and has all the information necessary for the task.
I may not quite follow as I browsed the thread rather superficially, but Scripting may be useful in this case.
You could try this JavaScript (save as a jsx-File in ExtendScript Toolkit into the application’s Scripts-folder).
But be warned: This would overwrite existing jpgs of the same name without prompting.
// saves jpg into same folder;
// be advised: this overwrites existing jpgs of the same name without prompting.
// 2010, use it at your own risk;
#target photoshop;
if (app.documents.length > 0) {
var thedoc = app.activeDocument;
// getting the name and location;
var docName = thedoc.name;
if (docName.indexOf(".") != -1) {var basename = docName.match(/(.*)\.[^\.]+$/)[1]}
else {var basename = docName};
// getting the location, if unsaved save to desktop;
try {var docPath = thedoc.path}
catch (e) {var docPath = "~/Desktop"};
// jpg options;
var jpegOptions = new JPEGSaveOptions();
jpegOptions.quality = 9;
jpegOptions.embedColorProfile = true;
jpegOptions.matte = MatteType.NONE;
//save jpg as a copy:
thedoc.saveAs((new File(docPath+'/'+basename+'.jpg')),jpegOptions,true);
//that’s it; thanks to xbytor; -
Error message 'Could not save to path /Users/yogasail/Documents/' appeared and cannot save files?
I have an iMac 21.5 running OS X 10.9.4:Processor 2.7 GHz Intel Core i5:Memory 8 GB 1600 MHz DDR3. I have suddenly got this message every time I try to save a file -'Could not save to path /Users/yogasail/Documents/Emma/xxxx.rtf. Choose a different path.' Unable to save anything now?? Can anybody help?
Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Open Save File Dialog with Default Path
Hi All,
I want to open a "Save File Dialog " with some default path.
Like when user run that script I want to open a "Save As" dialog box with default path "/Volumes/<shared name>/<folder name>/.. ."
I am using
File.SaveDialog(prompt, filter);
but it doesn't open to the location by default that I want to open.
Thanks
Harshlook at this thread to see if it helps
http://forums.adobe.com/thread/1077267?tstart=0 -
Unable to Open/Save files PS CS5.1 win xp
I have been running CS5.1 (Photoshop) for some time now and this morning when trying to save a file the program locks up cold, no dialogue box or anything. Just stops cold. Then I decided to try to open an existing file and the same thing happens.
Here is my system info.
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x32
Operating System: Windows XP 32-bit
Version: 5.1 Service Pack 3
System architecture: Intel CPU Family:15, Model:2, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 1
Processor speed: 2700 MHz
Built-in memory: 1536 MB
Free memory: 755 MB
Memory available to Photoshop: 1212 MB
Memory used by Photoshop: 100 %
Image tile size: 128K
Image cache levels: 4
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1280
Video Card Number: 1
Video Card: ATI Radeon HD 4600 Series
Driver Version: 6.14.10.6983
Driver Date: 20090710043618.000000-000
Video Card Driver: ati2dvag.dll
Video Mode: 1280 x 768 x 4294967296 colors
Video Card Caption: ATI Radeon HD 4600 Series
Video Card Memory: 1024 MB
Serial number: REMOVED
Application folder: D:\Program Files\Adobe\Photoshop CS5\Adobe Photoshop CS5.1\
Temporary file path: C:\DOCUME~1\Jimmy\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 74.6G, 50.1G free
Primary Plug-ins folder: D:\Program Files\Adobe\Photoshop CS5\Adobe Photoshop CS5.1\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2010/12/13-23:37:10 64.449933 64.449933
adbeape.dll Adobe APE 2011/01/17-12:03:36 64.452786 64.452786
AdobeLinguistic.dll Adobe Linguisitc Library 5.0.0
AdobeOwl.dll Adobe Owl 2010/06/03-13:43:23 3.0.93 61.433187
AdobeOwlCanvas.dll Adobe Owl Canvas 3.0.68 61.2954
AdobePDFL.dll PDFL 2010/12/13-23:37:10 64.341419 64.341419
AdobePIP.dll Adobe Product Improvement Program 5.5.0.1265
AdobeXMP.dll Adobe XMP Core 5.0 64.140949
AdobeXMPFiles.dll Adobe XMP Files 5.0 64.140949
AdobeXMPScript.dll Adobe XMP Script 5.0 64.140949
adobe_caps.dll Adobe CAPS 4,0,42,0
adobe_OOBE_Launcher.dll Adobe OOBE Launcher 2.0.0.36 (BuildVersion: 2.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
AFlame.dll AFlame 2011/01/10-23:33:35 64.444140 64.444140
AFlamingo.dll AFlamingo 2011/01/10-23:33:35 64.436825 64.436825
AGM.dll AGM 2010/12/13-23:37:10 64.449933 64.449933
ahclient.dll AdobeHelp Dynamic Link Library 1,6,0,20
aif_core.dll AIF 2.0 53.422628
aif_ogl.dll AIF 2.0 53.422628
amtlib.dll AMTLib 4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
amtservices.dll AMTServices 4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
ARE.dll ARE 2010/12/13-23:37:10 64.449933 64.449933
asneu.dll AsnEndUser Dynamic Link Library 1, 7, 0, 1
AXE8SharedExpat.dll AXE8SharedExpat 2011/01/10-23:33:35 64.436825 64.436825
AXEDOMCore.dll AXEDOMCore 2011/01/10-23:33:35 64.436825 64.436825
Bib.dll BIB 2010/12/13-23:37:10 64.449933 64.449933
BIBUtils.dll BIBUtils 2010/12/13-23:37:10 64.449933 64.449933
boost_threads.dll DVA Product 5.0.0
cg.dll NVIDIA Cg Runtime 2.0.0015
cgGL.dll NVIDIA Cg Runtime 2.0.0015
CoolType.dll CoolType 2010/12/13-23:37:10 64.449933 64.449933
data_flow.dll AIF 2.0 53.422628
dvaadameve.dll DVA Product 5.0.0
dvacore.dll DVA Product 5.0.0
dvaui.dll DVA Product 5.0.0
ExtendScript.dll ExtendScript 2011/01/17-17:14:10 61.452840 61.452840
FileInfo.dll Adobe XMP FileInfo 5.0 64.140949
icucnv36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
icudt36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
image_flow.dll AIF 2.0 53.422628
image_runtime.dll AIF 2.0 53.422628
JP2KLib.dll JP2KLib 2010/12/13-23:37:10 64.181312 64.181312
libeay32.dll The OpenSSL Toolkit 0.9.8g
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1263
MPS.dll MPS 2010/12/13-23:37:10 64.450375 64.450375
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.6161
msvcp71.dll Microsoft® Visual Studio .NET 7.10.3077.0
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.6161
msvcr71.dll Microsoft® Visual Studio .NET 7.10.3052.4
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.6161
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS5.1 CS5.1
Plugin.dll Adobe Photoshop CS5 CS5
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 2.5.0.232
PSArt.dll Adobe Photoshop CS5.1 CS5.1
PSViews.dll Adobe Photoshop CS5.1 CS5.1
SCCore.dll ScCore 2011/01/17-17:14:10 61.452840 61.452840
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
ssleay32.dll The OpenSSL Toolkit 0.9.8g
tbb.dll Threading Building Blocks 2, 1, 2009, 0201
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 2.0.0.15
WRServices.dll WRServices Thursday January 21 2010 12:13:3 Build 0.11423 0.11423
wu3d.dll U3D Writer 9.3.0.113
Installed plug-ins:
3D Studio 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Accented Edges 12.0
ADM 3.11x01
Angled Strokes 12.0
Average 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Bas Relief 12.0
BMP 12.0.2
Camera Raw 6.6
Chalk & Charcoal 12.0
Charcoal 12.0
Chrome 12.0
Cineon 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Collada 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Color Halftone 12.0.2
Colored Pencil 12.0
CompuServe GIF 12.0.2
Conté Crayon 12.0
Craquelure 12.0
Crop and Straighten Photos 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Crop and Straighten Photos Filter 12.0.2
Crosshatch 12.0
Crystallize 12.0.2
Cutout 12.0
Dark Strokes 12.0
De-Interlace 12.0.2
Dicom 12.0
Difference Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Diffuse Glow 12.0
Displace 12.0.2
Dry Brush 12.0
Eazel Acquire 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Embed Watermark 4.0
Entropy 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Extrude 12.0.2
FastCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Fibers 12.0.2
Film Grain 12.0
Filter Gallery 12.0
Fresco 12.0
Glass 12.0
Glowing Edges 12.0
Google Earth 4 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Grain 12.0
Graphic Pen 12.0
Halftone Pattern 12.0
HDRMergeUI 12.0
IFF Format 12.0.2
Ink Outlines 12.0
JPEG 2000 2.0
Kurtosis 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Lens Blur 12.0
Lens Correction 12.0.2
Lens Flare 12.0.2
Lighting Effects 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Liquify 12.0.1
Matlab Operation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Maximum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Mean 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Measurement Core 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Median 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Mezzotint 12.0.2
Minimum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
MMXCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Mosaic Tiles 12.0
Multiprocessor Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Neon Glow 12.0
Note Paper 12.0
NTSC Colors 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Ocean Ripple 12.0
OpenEXR 12.0.2
Paint Daubs 12.0
Palette Knife 12.0
Patchwork 12.0
Paths to Illustrator 12.0.2
PCX 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Photocopy 12.0
Photoshop 3D Engine 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Picture Package Filter 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Pinch 12.0.2
Pixar 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Plaster 12.0
Plastic Wrap 12.0
PNG 12.0.2
Pointillize 12.0.2
Polar Coordinates 12.0.2
Portable Bit Map 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Poster Edges 12.0
Radial Blur 12.0.2
Radiance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Range 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Read Watermark 4.0
Reticulation 12.0
Ripple 12.0.2
Rough Pastels 12.0
Save for Web & Devices 12.0
ScriptingSupport 12.1
Send Video Preview to Device 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Shear 12.0.2
Skewness 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Smart Blur 12.0.2
Smudge Stick 12.0
Solarize 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Spatter 12.0
Spherize 12.0.2
Sponge 12.0
Sprayed Strokes 12.0
Stained Glass 12.0
Stamp 12.0
Standard Deviation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Sumi-e 12.0
Summation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Targa 12.0.2
Texturizer 12.0
Tiles 12.0.2
Torn Edges 12.0
Twirl 12.0.2
U3D 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Underpainting 12.0
Vanishing Point 12.0
Variance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Variations 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Video Preview 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Water Paper 12.0
Watercolor 12.0
Wave 12.0.2
Wavefront|OBJ 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
WIA Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Wind 12.0.2
Wireless Bitmap 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
ZigZag 12.0.2
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Access CS Live
Flash
Kuler
CS Review
Installed TWAIN devices: NONE
Yeah wow, thats alot of stuff half of which I have no clue what it means .
Anyways I am aware that my machine is not the best to run Photoshop CS5.1 but it has allways worked well for me until this morning.
I have tried all the usual stuff .. restarting windows, restarting program, resetting prefs, etc...
I have not done an uninstall and reinstall as I hope to find a solution to this problem before resorting to the reinstall.
Thanks in advance...FIXED....
Strangly enough after the 3rd time deleting prefs it started working........
Just goes to show. To err is human, to realy foul things up it takes a computer.... -
How to Print File Path and File Name at the bottom of the Report?
Hi guys,
I have situation where i have to display my file path where i save my file. For example: U:\Reports\Monthly_Reports\Compay_xyz.jsp
also, after the file path line if its possible i would like to display the date where the last modification done on the file.
I read one of the post and some one suggested that use srw.get_report_name() but since i am a new to Reporting i am not sure how to use it.
Can anyone describe me little bit in detail please?
Thank You.Hi,
Your logic seems to be fine and you should put it in the additional plsql code section "After displaying the page". But you may have to check you syntax by compiling it. You cannot use "LINEFEED". It should be '<br>'. This is the line break in html. Please check your type declaration. Also some ';' is missing after some statements.
Hope that helps.
Thanks,
Sharmila
Maybe you are looking for
-
After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer u
-
help, my phone says it needs to restore but when i go on to itunes, it says it cant because my phone has a password!!! i cant put the password in because the phone says it needs a restore!!1 catch 22!!! help much appreciated, thank you
-
Control-click class references in Xcode 6.1 not working?
In Xcode 6.1 (6A1052d) when I control click on a class to search for methods, it gives me an Activity Indicator ( spinning bars, not beach ball), but it doesn't go any further than that. I've downloaded the documentation for OS X 10.10, iOS 8.1, and
-
Mac/OS X/InDesign CS3 Trying to reduce a 27 page document to 47%. Using a program called "Gluon". Reducing 6 pages at a time. Some items are not reducing, tabs are not reducing, embedded images are not reducing. Is there a script for this or am I mis
-
Every since my upgrade to iTunes 11.0.5, I have had problems with my AppleTV homesharing with iTunes. The media, (Movies, TV Shows, etc) hangs on that spinning sprocket/gear wheel or show's the first frame of the movie and never loads or plays. I h