SaveAs with DialogModes.All not accepting new filename

I have a script that resizes and saves a file several times. On the last one I want to have the SaveAs dialog display so that I can adjust the JPG quality if necessary. When I set DialogModes.All before my call so SaveAs, the SaveAs dialog doesn't recognize the filename I pass in, which is different than the other times I saved the file. The SaveAs dialog uses the last filename the script used to save the file.
Is there a way to get the SaveAs dialog to use a different filename with DialogModes.All?
Thanks,
Scott

>Have you tried using some ScriptingListener code?
I have used an alert to make sure the filename I am passing in is what I want. It appears that it is just ignoring the filename and using what was entered in the dialog the previous call to SaveAs.
Note that it works as expected if I have DialogModes.NO before the call to SaveAs, and the correct filename is used and saved without notification obviously. That's how I have been running it for a while now.
I haven't tried ScriptingListener, but will take a look at it.

Similar Messages

  • Issue with HP 4225 officejet , Not accepting New Print Cartridge

    dear Sir,
    My HP officejet 4225 all in one is not accepting the New cartridge ( black 27b). From last few days i am experincing horrible things in printer which i m not able to understand, like from two three days it takes 15 minutes to print one page.
    it starts printing ,prints one line and stop, wait for 1 min again prints few lines again become silent.in this way it takes 10 mins to print one normal page.
    Yesterday it starts displaying error message "Remove and check right cartridge".I checked it ,cleaned the surface of black catridge (27b)but nothing happen.i installed an old empty catrdige (27b) it started working again. i replaced it with the existing cartridge it displays the same message.
    Today I bought a new cartridge ( 27b) after instaaling it again display the same error message. I replaced with another very old cartridge (27) it again works ,it just displays black cartridge Empty.
    now i m surprised a running printer suddenly not accepting the installed cartridge. accepting the old cartridges not accepting new cartridge.
    one more thing the speed of printing has become normal after this incidence. I did a facory reset two days ago to check wether speed of printing improves or not? but it didnot improved however with the issue of cartridges ,when using old crtrdige (27b, 27) using only colour printout the printing speed is ok. i,e it does not start and stop.
    pls help with this issue . i m totally stuck.
    Thanking you,
    Rahul Vijay

    Oh, I don't think you are stuck with USB.  From your post above:
    When I select network, I get three options:
    View Network settings
    Restore Network Defaults
    Advanced
    With the Ethernet unplugged, select the middle one.  Then reset your router by removing its power for a few seconds, then plug back in.  Turn the printer off then back on.
    Finally, plug in the Ethernet cable.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • ICloud now insisting on previous Apple id. Cannot log in. Will not accept new id and emails old id – a closed email account – with info.  How do I fix?

    iCloud now insisting on previous Apple id. Cannot log in.
    Will not accept new id and emails old id – a closed email account – with info.  How do I fix?

    If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  You can now use your current password to turn off Find My iPhone, even though it prompts you for the password for your old account ID.  Then you can go back to https://appleid.apple.com and change your ID back to the way it was.

  • Icloud does not accept new Apple ID. What can I do to get it to accept.

    Icloud does not accept new Apple ID. What can I do to get it to accept.

    Please try logging in with your current Apple ID here in order to test: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/directToSignIn?loc alang=en_US
    If your new ID doesn't work try logging in with your old details as maybe the change didn't work as first thought?
    Regards,
    Steve

  • TS4212 why my computer is not accepting new latest version ? 10.6 version i have macbook i have apple software cd

    why my computer is not accepting new latest version 10.6 i have apple cd new latest version cd why is showing me mac
    ox cannot be installed to this computer ? please help me

    You can't use a disk which originally shipped with a Mac on a different Mac model. You also can't install Mac OS X 10.6 on a PowerPC Mac.
    (67906)

  • Ipad will not accept new version of itunes

    ipad will not accept new version of itunes

    What version of iTunes are you trying to install. If its 10.6.3 or 10.7, those versions are installed on a computer, not the iPad.
     Cheers, Tom

  • Why is netbook with c60 processor not accepting the download of drivers online & cannot use bluetoot

    why is netbook with c60 processor not accepting the download of drivers online & cannot use bluetoot

    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bugs or feature requests
    Error: "Unable to sync files"

  • Mac mail will not accept new messages

    been working fine but after trying to send a big photo file, MacMail stopped accepting new messages and requires minutes to send out new messages. I have checked and rechecked all parameters. help!

    Have you quit and reopened Mail?
    Empty the Mail cache in your Home Folder Library>Caches>com.apple.mail>Cache.db. Just move Cache.db out to the Trash -- not the enclosing folder -- with Mail closed. Don't empty the Trash. If it doesn't help, then just put it back.

  • IPad will not accept new Enterprise password

    I normally am able to access my workplace email (via Microsoft Outlook Exchange) on my iPad. I was required to change my Enterprise (and Outlook) password on my workplace computer. Now iPad will not accept the new Exchange account password which renders all other functions on the iPad inoperative. How do I bypass that Exchange password prompt?

    We have similar issue with our corporate ipads.
    Enter the new Exchange password then reboot the iPad. Exchange should accept the password after reboot, seems to be some peculiar quirk!

  • MacBook Air not accepting new password.

    I updated my MacBook Air to new OS and had to restart system, now its not accepting my password. I went online and reset password a couple of times but still cannot get Mac to accept latest password. Ideas?

    You can reset your password with the install cd or usb ...
    Follow these steps to reset a password when there is only one administrator account on the computer, or if the original administrator account needs a password reset. "Original" administrator account refers to the one that was created immediately after installing Mac OS X. If the original administrator password is known, that administrator account may be used to reset the passwords of other administrator accounts using the steps described above. These steps require an optical drive; if your Mac does not have an optical drive and you have a Mac OS X v10.6 Install disc, see below.
    Start up from a Mac OS X Install disc (one whose version is closest to the version of Mac OS X installed).  Usually, you can start from the disc by putting it in your computer, restarting, and holding the C key. Or, put it in the computer and click the Install or Restore icon you see in the disc's main window (after which the computer will start from the disc without you needing to hold C). Or, you can use Startup Manager or the Startup Disk preference pane to select the Install disc.
    Choose a language, click the arrow button to continue,
    Mac OS X v10.6 or later: Choose Password Reset from the Utilities menu.
    Mac OS X v10.5 or v10.4: Choose Reset Password from the Utilities menu.
    Mac OS X v10.3: Choose Reset Password from the Installer menu.

  • Cannot sync Keychain with MobileMe - password not accepted

    I have installed SL twice after talking with Apple Support. On my MacBook Pro, immediately after installing SL I received a message to input the master Keychain password for my MacBook Pro. I had never see this message before installing SL. I never had separate password for my keychain, so I input my master logon password. It was not accepted.
    I posted this problem in a different thread under Apple Support and received advice to delete certain preference setting, use Keychain first aid, restore to default, etc. I did all that. No luck.
    I called Apple Support and the representative walked me through similar steps before advising me to reinstalling SL.
    I reinstalled, no fix. All that I have done is set my MobleMe preferences to NOT sync the Keychain so I won't get the message anymore.
    I also have an iMac and have had NO problems with the SL installation.
    Any advice or suggestions on a more permanent fix would be extremely appreciated! Thanks!

    I'm having real issues as well with my keychains on one of my machines. Are you having similar problems to what I have listed in http://discussions.apple.com/thread.jspa?threadID=2130442
    Note that if your keychains are hosed, like mine appear to be, you will have trouble doing anything with MobileMe.

  • ICloud not accepting new connections

    my iTunes library has been working just fine though my mac air, now for some reason iTunes won't connect to the iCloud and play anything, music tv, nothing? all it does is occasionally tell me that iCloud in not accepting any new connections?
    help please?

    Judie... 
    I responded to you here >  https://discussions.apple.com/message/16482316#16482316
    Please do not startup duplicate discussions. Thanks!

  • Problems with PS CS4 not accepting CS3 upgrade serial number

    I have recently purchased PS CS4 upgrade and I am having a problem installing on a new machine.  My CS3 serial number is not accepted.  Where can I find my original CS3 serial number?
    pete424

    1 - on the sticker on the disc case
    2 - in your account at Adobe (if you registered)
    3 - by calling Adobe (this is a user group, not Adobe support)

  • My mac mail not working, not accepting new password

    My mail (mobile me) that is now icloud, is not getting new mail. It is there on web mail, but not on my lap top. It keeps saying my password is incorrect. I have changed password twice and still no luck...any suggestions?

    Feldblume wrote:
    My operating system is OS X 10.6.8.  Could this be because I do not yet have Lion?
    Exactly so. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
    Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
    The situation with iCloud and Snow Leopard is described in detail here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html

  • CSM not accepting new SSL connections

    Hi,
    Could some one please help on me on this.
    My CSM is not accepting any new SSL connections for around 4 hours now. I have manaully rebooted the CSM now and it seems to be working fine.
    Teh CSM was working fine without any problem and I have not done any changes on the module. I would like to know why suddenly CSM not operational?
    Is ths hardware issue or software?
    I am running 4.1(3) software versin on the CSM.
    Thanks in advance. Your help would be highly appriciated.
    Regards
    Alex.

    Hi Alex,
    We would need to see a failed connection on the CSM's port-channel to see at what point the connection fails and multiple showtechs taken during the issue to see what, if any, error counters were incrementing.  Without this kind of data, there is no way to tell what the root cause of the failures were.
    Given that a reload of the module recovered the connectivity, it is likely not a hardware issue.
    In the event that this was to reoccur, I would recommend the following action plan:
    Get a showtech from the Supervisor
    Using SPAN, start a capture on the CSM port-channel.  The source interface of your monitor session would be Po<256 + csm-slot>.  For example, if the CSM is in slot 4, then the source interface of your  monitor session would be Po260.
    Let one or more connections fail
    Stop the capture
    Get a second showtech from the Supervisor.
    Also, as a proactive measure, I would strongly recommend an upgrade to the latest CSM 4.2(x) or 4.3(x) software as the 4.1 code is very old and there have been many bug fixes since then.4.2(13) would be a good choice, unless you need features of the 4.3(x) stream.
    Also, note that the CSM is now End-of-Life, as well as the 4.1(x) software.  Any bug fixes that are implemented until the End-of-Engineering support will only go into the 4.2(x) and 4.3(x) streams.
    Hope this helps,
    Sean

Maybe you are looking for

  • Changing the label name in a label based menu

    Hello, In my current dashboard, i have been forced to change the front page label name in a label based menu quite late on in the design. However, this has consequently resulted in the front page not showing up until after I have clicked the mouse. P

  • Merge Address Book Cards Greyed out

    Hi all, I've got an envelope that I use every once in a while. It has a logo and return address. For the recipient address, I just go to address book, change the information in the group that I call "current envelope" then I go to pages, merge and pr

  • Summing the Rows and Columns in an Array

    I am importing a 2-dimensional array of integers.(which is held in a 2-dimensional array) I need to store the row sums and column sums in separate 1-dimensional arrays. I can get the integers in and print out a list along with the grand total(sum of

  • Does the Order of the tablesjoins in Where clause matter in ORDERED hint?

    The ORDERED hint requests that the tables listed in the FROM clause of a SQL statement be joined in the order specified. But does the order of the join in "where" clause matters? Will be there any performance difference between below query? The order

  • Use Report Layout Service

    Hi All: I want to change the default report layout for a delivery note. How can i do it? I use report layout service but i don´t know how to set my new report layout by default. Can you help me? thanks Ricardo