Saved PDF does not restore data properly when reopened
I have a simple PDF I created in Livecycle Designer where I fill in some input fields and save the PDF. The problem I am having is when I save the PDF, and then reopen it, the data in the input fields are no longer where I originally typed them in.
The PDF is saved as a version 8 Dynamic PDF and the Form properties is set to 'Automatic' (that is, not manual). If anyone can help me, I would be so appreciative.
My PDF can be downloaded at:
https://share.acrobat.com/adc/document.do?docid=bcb8f652-f468-4c81-b221-65a5e397c89d
I think I figured this out. The code to add subforms called sect is executing on the initialize event of the P1 subform. The initialize event is running twice (once on the server (pdf creation) and once on the client inside of acrobat when it is rendered. If you move that code to the Doc Ready event the form will display correctly. I put a textfield on the form this populated when the initialization script is run. This tells me how many times it runs.
Now back to your original problem.
If I run your script to populate the rooms and re-open it is getting messed up again because the Doc Ready event is running each time you open the form. Instead of trying to initialize the form programatically if you use the Initial count on the binding tab of the subform all of this initiazation problems go away.
Are you intending on having multiple rooms subforms per section or will it always be one to one? if there is a one to one mapping change the checkbox on the binding tab that indicates that multiple subforms are available.
Similar Messages
-
USMT Copies Data but does not restore data.
Can someone help me to shed some lite on a problem we are having? I am running an OSD task in SCCM2012R2. The Task Has the USMT option selected and enabled. When I run the OSD task on workstation I can see it run, I can even go to the directory
and see the data being backed up.
Now here is the problem, It won't restore. I can log back into the workstation (after OSD) using the exact same ID and none of the previous data is there:
No wallpaper, Bookmarks, Music, Documents, etc.
Ideas?If there is no loadstate log file, it means that the action didn't even start. Are there specific things configured on the options tab of that step. Also, did the task sequence finish completely?
One last thing, make sure that your format step does NOT format your hard disk (so look at the options tab to see when it performs the actions of the step). Hard-links are stored locally so re-formatting your hard disk will cause a lose of your data.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Webview does not load content properly when disabling its scrolling through script
I have an App in which I need to show some html content in a page but I have given my App's scrolling in it. So whole page needs to scroll combined. To achieve this I use two WebViews to navigate to string and get height of content by javascript from first
webview and assign it to second webview and then disable it's default scrolling. I have taken a rectangle over it to allow user to scroll in page. This strategy works fine where content is low but if the content is large in webview it shows blank page in top
and down and shows some content in middle. Sometimes it does not show content but Height gets assigned. I tried using RichTextBlock but it does not parse all type of tags and I don't want WebView to scroll but to adjust it's height according to content. can
anybody provide any help?
Link to my code App2Hi RohitrkKUmar,
After looking into your sample project, I found you are nesting unnecessary Grid and making thing complex. Using fixed height in the second grid and the app will use scroll bar if the height of content is longer than the grid. I make some changes according
to my understanding, you can try the following code snippet.
<Grid x:Name="LayoutRoot" Background="White">
<Grid.ChildrenTransitions>
<TransitionCollection>
<EntranceThemeTransition x:Name="Animation"/>
</TransitionCollection>
</Grid.ChildrenTransitions>
<Grid.RowDefinitions>
<RowDefinition Height="50"/>
<RowDefinition Height="500"/>
<RowDefinition Height="auto" />
</Grid.RowDefinitions>
<TextBlock Grid.Row="0" Text="Demo App" VerticalAlignment="Center" Foreground="Black" FontSize="24" HorizontalAlignment="Center"/>
<StackPanel Grid.Row="1">
<TextBlock Name="demoText" Foreground="White" Width="Auto" Height="Auto" TextWrapping="WrapWholeWords"/>
<WebView Visibility="Visible" ScrollViewer.VerticalScrollBarVisibility="Visible" ScrollViewer.VerticalScrollMode="Auto" ScrollViewer.ZoomMode="Disabled" DefaultBackgroundColor="Aqua" Margin="10" Name="aboutDescript" DOMContentLoaded="aboutDescript_DOMContentLoaded" />
<Rectangle Width="auto" Name="wbRect" Fill="Transparent"/>
</StackPanel>
<TextBox Grid.Row="2" Text="something else"></TextBox>
</Grid>
Please feel free to let me know if you have any concerns.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey. -
Cap 4 Quiz Results page not restoring data properly
I'm testing a Quiz built in Captivate 4 SCORM 1.2 which allows 5 attempts to achieve a passing score of 100. If the user fails, exits on the Quiz Results page, and then relaunches (bookmarked back to the Results page), the values displayed (score, number of questions correct, number of attempts) are not correct. Score is 1 or 4 or a random number, attempts goes back to 1. I am able to analyze the saved cmi data to see that the correct data has indeed made it to the LMS. And if the user clicks Retake for another attempt, the Results page will then update and show the correct number of attempts. So Captivate is reading in the saved number of attempts. But it seems like Captivate displays the Results page before it has fully retrieved the cmi data. Has anybody else had this issue? Any work-arounds?
Thanks in advance!added these into pagdef (A/B)
Refresh="prepareModel"
RefreshCondition="${sessionScope.Loans != null && adfFacesContext.postback == true}" into your <iterator ............../> -
PDFs not displaying text properly when going Mac- PC
We have a serious issue all of a sudden where AI files using Futura being converted to PDF are NOT showing up properly when viewed on PCs. This user is running 10.4.11, CS3 and Font Reserve. When she exports to PDF, random letters will be missing from the PDF file. This cost us a LOT of money last week when a file was sent out for printing. If they convert the fonts to outline prior, it works fine.
We didn't have this issue, ever, until the last week or so. As far as any of us know, NOTHING has changed in our environment.
I also had the user try to run the AI file through Distiller instead of "Save As PDF0", and it just errors out each time.
Any ideas?? Font issues are by far my biggest weakness, so it's a royal pain for me to figure out. Although, I don't even know if this is a font issue or not. Help!>They are just using export to PDF for the files.
From what program? No version of illustrator can "Export" to PDF. They all Save to PDF. This is more than an issue of semantics. If someone says they are "exporting" to PDF they might not be using Illustrator. An Illustrator user would not refer to "exporting" PDFs because that's not something they can do. -
When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the text and change the font, it does not change it properly? This is making it impossible to amend.
Hi Janedance1,
If the PDF that you converted already has searchable text, please try disabling OCR as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel. (If the PDF was created from a scanned document and doesn't already have searchable text, disabling OCR isn't a great option, as the text won't be searchable/editable in the converted Word doc.)
Please let us know how it goes.
Best,
Sara -
My ipod touch does not restore properly and comes up with an unknown error (9). What do I do? I have tried restoring it a few times and it keeps coming up with this error. Yet on Itune on my computer, it tells me that the ipod software is up to date. ipod screen is just showing the itune logo and a usb connector.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
http://support.apple.com/kb/TS3694#error9 -
I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!
If iTunes sees the iPod, try a manual install, as pointed out on link below.
Troubleshooting 101
Some topics covered
-Basic troubleshooting steps
-Hard reset instructions
-Manual restore instructions
-Hardware troubleshooting
-Preventive Maintenance
-Anti-theft & recovery tips
-Battery-saving tips
-Repair options
-Contacting Apple
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
Why is it that in these newer versions of Firefox (I have 21.0), when I open a link that I've saved, it does NOT display the URL in the address bar any more?
I can't drag and drop the link into an email, and I can't see the actual web address I'm connected to for reference OR for security purposes. Why was this changed?
It becomes necessary to reveal the properties of the URL link I've saved, using the Windows "Properties", then copying and pasting the URL into the Firefox address bar, before I can do anything with it.No changes have been made and no problem with extensions has interfered with the URL appearing in Firefox before. Only with the last few new versions of Firefox has this cropped up. Also, the link opens correctly - it just doesn't display the URL in the address bar, instead it just reads (in gray) "Search or enter address." How could another extension interfere if Firefox is the sole program associated with .htm, .html files?
-
Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0
Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser address bar and page reloaded.
Uninstalled Acrobat 9, reinstalled, still same problem.
Help please!Yes I can it only happens in the browser..
I reinstalled Windows on my machine and started over a couple of weeks ago.
When my desktop started up I didn’t have Acrobat installed and clicked on a pdf file and the open with xxx dialogue box came open.
I chose a different program as Acrobat wasn’t installed yet so it associated pdf files with another program.
Later Installed Acrobat and couldn’t associate the pdf file with acrobat so I went into Folder Options and manually associated PDF files with Acrobat.
Ever since then I get the error when something is downloaded and opened in the browser.
Works fine everywhere else and when I cancel the blank error, highlight the web address and press enter to reload it works 90% of the time.
Not sure what to do.. -
When creating PDFs, the PDF does not open.
I am using Acrobat Pro X...and have had no problem creating PDFs. Suddenly today when I create the PDFs, although they are created, the PDF does not automatically open upon creation (I have to go to the file folder location and open the PDF).
I tried repairing the Acrobat installation and that didn't help. And actually when trying through the Control Panel, a 2nd PDF printer was created which I cannot figure out how to delete (they both are listed under the same Adobe PDF printer).
So, the main issue is fixing so I the PDF automatically opens upon being created.....but if someone can help with the 2nd PDF printer that would be appreciated.
SteveThe check box is in the default properties of the Adobe PDF printer, under the settings tab. Get there with Start>Printers>select Adobe PDF and right click to check printing preferences. This is a selection, not a reason to reinstall. How it got unchecked is a different question.
If there are Adobe PDF printers present, just delete one of them or rename the second one to something else (like Adobe PDF backup). -
When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up during start-up and stays there for ten minutes. Then, the ipad will start up properly.
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers, Tom -
TS1456 When it is trying to restore it freezes and does not restore.
When it is trying to restore it freezes and does not restore.
If no error messages
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Itunes store does not show on ipad when i launch app its pages are blank
itunes store does not show on ipad when i launch app its pages are blank
This indicates there might be an issue with the time configuration on the device.
Go to Settings > General > Date and time. See if Set automatically is switched to on. If so, switch to off and ensure you set date, time and time zone manually and correctly.
Power off the device (hold sleep button for four seconds, then slide to power off), then power back on.
If issue persists, switch Set automatically back to on, and if not resolved then restore the device.
Maybe you are looking for
-
Printing date in the actual picture?
Hi, I have iPhoto on two machines. One older and one newer. However, I cannot figure out how to save an image with the date -in- the image. My wife wants to print photos that included the date taken on the picture. Is there a way I can do this in iPh
-
Hi, I want to generate xml output of a query. ( suppose if i write select * from tab1 ; then i want all the rows from the table tab1 in xml form ) how to do it.. ? plz guide.
-
Successfully enrolled devices not showing in profile manager
On a newly installed (from scratch, formatted etc) Mountain Lion server, I'm having an issue where I can successfully enrol a device, an iPhone with 6.1 iOS in this case, but the enrolled device does not show up in the devices? I see a previous post
-
Dynamic Page Numbering for DPS documents
Since we don't have just 1 document for the entire publication; is there any way to have a footer that has the page number in any way? (without having to manually update every page?)
-
Hi all, i have a question. This is what is like to build. i have a string value something like "abcd" now i like to convert the caracters in this string to a decimal value cracter by caracter, do a calculation and bring it back to a ASCII value like