Saved selections

Experts, I have created a default saved selection for page 1 which says table1.column1='ZZZ'. So, when a user navigates to this page1 this SS applies. But when user navigates to page2, I see the filter of 'zzz' being applied even there. I could have understood this if it would have been table1.column1 on page2 but it is table2.column2 and hence a filter of table2.column2='zzz' ia applied. Note the case of filter , it has converted from upper to lower.
Thoughts?
thx,
parag

Hi Parag,
Looks weird, can you try changing the prompt scope to Page and try? Looks like a bug to me.
Regards,
Dpka

Similar Messages

  • Saved Selections missing from Spreadsheet Add-in

    Hi,
    One of my end users is having a problem with the Oracle Spreadsheet Add-In that no-one else seems to be having and I'm at a loss for what to suggest to him.
    Yesterday he encountered some network related problem which left it impossible for the Spreadsheet Add-in to connect to the AW on the database. Everybody else that uses OLAP cubes was still able to connect without problems. When he entered the username and password and pressed connect the system hangs for a few seconds and then returns to the spreadsheet without invoking the wizard. Our desktop services team looked at the problem and couldn't resolve it so have re-installed the Spreadsheet Add-In. This has resolved his connection problems and he is able to build his own queries using the cubes.
    The problem that he is now finding is that the saved selection criteria that he had previously been using was no longer visible to him. I.e. when he is in the wizard building a query based on a cube, he selects, say, the time dimension, and rather than selecting from the members tab on the left-hand side of the screen, he moves to the Saved Selection tab. It is at this point that he would usually see a list of his previously saved selections - but he doesn't see any folders or selections.
    When I reproduce his steps on my computer I see a folder called Users and then another folder with the schema name and then underneath that there are a number of saved selections. I can select these without any problems.
    I'm not sure if this problem is related to permissions somewhere or if somehow the installation is incomplete.
    Has anyone encountered this before??
    LM

    The first step to resolving this issue is to check your Analytic Workspace is working. Within AWM can you right click on each dimension and select the option "View data" - make sure you can drill up and down on each dimension. Then repeat this process for each of your cubes. I suspect there is something wrong with either a dimension or cube. If you cannot see data within AWM then Excel will not with either.
    If the data viewer in AWM is working OK, then Excel should work as well.
    Keith Laker
    Oracle EMEA Consulting
    BI Blog: http://oraclebi.blogspot.com/
    DM Blog: http://oracledmt.blogspot.com/
    BI on Oracle: http://www.oracle.com/bi/
    BI on OTN: http://www.oracle.com/technology/products/bi/
    BI Samples: http://www.oracle.com/technology/products/bi/samples/

  • How to get Saved Selection list in javascript?

    Hello!
    Recently I met a little problem about save selection. I want to get saved selection list so that I can used in javascript. Now I have no ideals. Hope you tell me some useful information about how to get Saved Selection list in javascript!

    Mark is right, it's not possible.
    But do you know you can assign selection to a variable, and get back to it simply like this?
    var sel = app.selection;
    app.selection = null;
    /* your codes here
    app.selection = sel;

  • Saved Selections not applying hierarchy change in dimension

    I am using Oracle BI Discoverer 10.1.2.54.25. I have created Saved Selections and am trying to have 3 saved selections for a certain dimension in my report. I want each saved selection to apply a different hierarchy within that dimension, but when I do a replace to apply the new saved selection in the report, it looks like its working, but it does not change the hierarchy - it looks like it always uses the default. I do select the hierarchy I want in the saved selection definition. Can anyone help?
    Thank you!
    Ann

    You should post your question to [disco forum|http://forums.oracle.com/forums/forum.jspa?forumID=56&start=0].
    I noticed that I cannot include the saved selection created for other hierarchies than default.
    Thanks
    Brijesh

  • Editing a saved selection

    Experts, I have a quick question. I have my saved selection out there on a page. Now, if I want to change that saved selection to add sorting on one column, how do I do that? Do I need to create another saved selection or is there a way to edit the existing one?
    thx,
    parag

    Page Options -> Edit Saved Selections and Defaults
    Delete it then create it as new

  • Saved Selections for users

    Hi,
    Is there a way to control the option ' Save selections for others'? I know how to control the selections option from Privileges. But, I don't see the option to control saved selections for others.
    Can someone please let me know if this can achieved?
    Thanks
    Chandu.

    Hi,
    The option you have specified controls from having selections privilege for a user.
    I want to control the options * to save selections for others*.
    Meaning that, I want to disable the option - * Page Options --> Save Current Selections --> For Others*, but keep the option * Page Options --> Save Current Selections --> For Me*
    Is it possible?? Please let me know.
    Hi..I just realized that, for non-admin users, ( user without admin privileges) will not be seeing the option ' Page Options --> Save Current Selections --> For Others'
    Thanks.
    Edited by: Chandu.bi on Mar 20, 2011 12:47 AM

  • Saving Selection?

    I made a selection on my background layer. Had to leave for a while, so I closed and saved the file. Upon re-opening it, I don't see those marching ants. Has the tediuous work I've put in gone to waste? Can I get those ants back? If not, how do I keep this from happening nextime?
    Dave

    You can save selections by going to Select>Save Selection and can load the saved selections by going to Select>Load Selection.
    If you didn't save the selection or copy the selection contents to a new layer or layer mask then your selection is probably gone.
    http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f2773521512e28aff242- 7fdb.html

  • Demand Planning : Time saved selection

    I would like to have a Moving Range Time selection : If I forecast with 12 monthes History and 6 month forecast horizon, today, I would like to select from November 2005 to April 2007.
    And I would like that this time window to change automatically next forecast month (select from December 2005 to May 2007, when I forecast on December).
    I think this is possible using Saved Selection, but I do not managed to do it.
    Any solution ?
    Thanks in advance.

    Hi ct,
    I cannot get a complete automatic solution - here is my best effort:
    Create New Saved Selection
    Time Dimension     
    Name “Rolling Window”
    Click Selector
    Ensure Gregorian Hierarchy
    Click Choose Values by Range
    Select: the latest 12 Gregorian Month.
    Click OK (the values that appear will depend on you current system latest value – for me this is Dec 06 – so I get Jan 06 to Dec 06)
    Click Choose Values by Range again
    Add a range of Gregorian Month
    From: Jan 07
    To: May 07
    Click OK
    Save Steps and add description as necessary and apply Saved Selection to objects that need it.     
    Next cycle the new latest month will create a new latest 12 months of history (so the Time values will be Feb 06 to Jan 07) but here is the problem – the add part (Jan 07 to May 07) will remain static. So at the start of the Monthly cycle you will need to open the Saved Selection "Rolling Window" and add a new time layer to the end (for example Jun 07). The Saved Selection will auto apply to all the objects that use it. It is not yet possible to create rolling time views of the future (more is the pity). I keep meaning to raise an enhancement request…. If someone else has worked out a way to do it I will be most pleased to see it.
    Regards
    Simon.

  • Copying a users' saved selection to other users

    Hello, one of the users have about 10 saved selections on a dashboard. We want to make the saved selections available for another set of 30 users. Can this be done in OBIEE 10.1.3.4?
    When i loggin as administrator, i see the ability to save saved selections to other groups. But, as an administrator, i dont have access to the saved selections of the users.
    Maybe, i can copy the _selections folder in webcat to the other user's folder.  Anybody tried this?  Help.
    Thanks
    Vimala

    Hi,
    In reports input Screen you have this option,
    In selection screen you can find, Save as a New varient, give some name and save , don't select Save as User Varient and save it.
    Note: Check with the select Save as User Varient & Use as default Varient options.
    Thanks
    Reddy

  • Express Spreadsheet Add-in Saved Selections

    Hi All,
    I am currently doing some development with Express 6.3.4 and the Spreadsheet Add-in with Excel.
    I was wondering if anyone new where the Saved Selections, created using the Express Wizard Selector are stored, so that I could refer to them programtically using the API.
    Regards,
    Imran Shah
    Ioppolo & Associates
    [email protected]

    The definitions of saved selections created within XSA are stored in the system project file (xpaddin.xpj which is just a binary file) of the user who created them. Saved selections created in this way are only accessible to the user that created them through XSA. This file is located in the XSA directory.

  • Working with Saved Selections

    Hey guys,
    I'm working with a lot of saved selections suddenly, and was wondering if there are easier ways to work with them that don't require ScriptListener script.  The 3 things I can think of that I need to do with saved selections is, of course, save a selection, load a selection, and the one I can't figure out is, can I simply check to see if a selection exists in the saved selection list?  I'm assuming the best way to check for a saved selection is to simply look for that selection via the channels window/tab (a feature I haven't used much as far as script is concerned).  Saving a select I would imagine is fairly simple, I just don't know how to do it outside of using SL script.  Loading selections gets a little more complicated as I need to load a selection from one document into another.  I have SL script to do both the save and the load, but if there is a cleaner way to do those, I'm all for it.  The biggest thing is how to determine if a certain selection has even been saved.  Anyway, any tips anyone can give are much appreciated.
    Thanks!
    dgolberg

    Ok, of course I go and figure out most of the things I struggled with on my own shortly after posting.  For finding and loading a selection was as simple as below:
    var thisDoc = app.activeDocument;
    var myDoc = app.documents.getByName("original.psd");
    var chan = myDoc.channels.getByName("channelName");
    thisDoc.selection.load(chan);
    Creating the chan variable throws an error if it can't find the one specified, so it simply needs to be placed in a try statement if you simply want to see if it's there or not.  The load was a lot simpler than I expected as well.  I'm still a bit confused on the save though.  It doesn't seem quite as cut-and-dry as the check and load.  Any suggestions on simply saving a selection as a certain name?
    Edit: One thing to note is; if you're loading the selection to another document; it appears that the target document must be the exact same width/height as the source of the selection.

  • Saving selections vs. making them alpha channels?

    When I first started dabbling with PS many years ago, I saved selections as alpha channels, and reloaded them as needed, though now I see you can just save them under the select menu. Is there any reason to still do it through the alpha channel? Are there pros and cons either way?
    Thanks.

    There's a big pro for using the Save/Load Selection...  You can combine the selection with existing channels.  I guess that's what JJMack is saying as well.
    -Noel

  • Registry Wizard not saving selections in Group Policy Preferences.

    Hello,
    I am trying to set registry keys for ODBC settings using Group Policy Preferences. All PC's in the domain are Windows 7. In testing, I was able to get this to work. Now that I am trying to create it for production, I am unable to get it to work.
    I am using the same PC to create for production that I used when I was testing.
    The steps I am taking are as follows:
    Create a new GPO. Edit the GPO and navigate to the registry node under Computer Configuration, Preferences where I create a new Collection Item. I then right click the new collection item and choose New - Registry Wizard. Using Local Computer,
    I navigate to [HKLM] > Software > Wow6432Node > ODBC > ODBC.ini
    Under the ODBC.ini key are all of the keys and data I want to include in my policy. When I check each key and put a check mark beside each data item in the lower window, my selections in the lower window are not being saved. The check mark
    shows up at the time but they are gone if I go back to check my work before hitting the finish button. If I go ahead and finish the policy anyway, I only get the keys, not the data items when the GPO is applied.
    I have found a work around but it is very cumbersome and isn't a good long term solution. The work around is to go ahead and create the policy, then go back into the collection and expand everything on the left and add each data value to each key one at
    a time using the All Tasks > Add - menu item.
    Any ideas why this is happening? I should also mention when I was "testing", I was hitting the same domain controller as I am when trying to build this for my "production" policy.
    Thanks in advance.

    Hello,
    Thanks for your reply. I am waiting on my account to be verified before I can post a screen shot.
    I did discover that if I go through and click on all the data items more than once, it appears to work. Basically, I went through each key and checked the data items, then went back to the top and started over again. All of the checks were gone, so I checked
    them again and clicked finish. I don't know if they were still missing but checking them twice seems to have worked.
    I can replicate the issue if I only check them once.

  • Saving Selection Screens in Webdynpro Abap

    Hi ,
    Could you please throw some light on how to save the selection screens in Webdynpro Abap ?? Just like variants in normal Abap?
    Thanks and Regards
    Alok Sharma

    HI,
    I dont think there is automatic saving of varients in web dynpros  just like normal selection-screen.
    Just check this link you might get some idea.
    Link[Save Varient|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f028c2b9-1730-2d10-71ae-ce300ea00573?quicklink=index&overridelayout=true]
    Regards and Best wishes.

  • Saved Selections are Black Not White

    I was working on an image and made one selection, which I then saved as an alpha channel. It saved properly with the selection area white and the rest of the image black. I made another selection and saved it as an alpha channel, but the selected area was black, with the rest of the image white - which of course is the reverse of what it should be.
    I tried some other images, made selections with various tools and each time I saved them as an alpha channel the selected area is black with the rest of the image white.
    Why is this happening?
    Thanks,
    Greg

    Thank you for your responses. I am able to invert the selection once it is made, but my query is to why my selection area initially was white (as it should be) and then suddenly all my subsequent selections are black.
    I can invert them, as you point out, but isn't the selected area supposed to be white when I first make the selection, rather than having to invert the selection afterwards?

Maybe you are looking for