SavePointException occurring when closing task flow ran as dialog

Hi,
JDeveloper: 11.1.1.5
Whenever I close a task flow that is run as a dialog, either using the 'X' button at the top, or by executing a return activity, I am getting the following exception. Before when I attempted to close the dialog, I would get a warning about unsaved changes, but I wouldn't get any exceptions. Any idea what is going on?
<ControllerState> <deliverWindowCloseEvent> ADFc: Exception thrown by window close listener.
oracle.adfinternal.controller.savepoint.SavePointException: ADFC-08011: The JNDI connection name is not specified in configuration file adf-config.xml.
     at oracle.adfinternal.controller.savepoint.SavePointUtil.createAndLogSavePointException(SavePointUtil.java:54)
     at oracle.adfinternal.controller.savepoint.SavePointUtil.createAndLogSavePointException(SavePointUtil.java:38)
     at oracle.adfinternal.controller.savepoint.SavePointDBConnectionFactory.getConnection(SavePointDBConnectionFactory.java:104)
     at oracle.adfinternal.controller.savepoint.SavePointDBPersistManager.getConnection(SavePointDBPersistManager.java:188)
     at oracle.adfinternal.controller.savepoint.SavePointDBPersistManager.createAndExecuteStatement(SavePointDBPersistManager.java:709)
     at oracle.adfinternal.controller.savepoint.SavePointDBPersistManager.createTable(SavePointDBPersistManager.java:173)
     at oracle.adfinternal.controller.savepoint.SavePointDBPersistManager.insertSavePoint(SavePointDBPersistManager.java:205)
     at oracle.adfinternal.controller.savepoint.DBSavePointManagerImpl.storeSavePoint(DBSavePointManagerImpl.java:126)
     at oracle.adfinternal.controller.savepoint.SavePointManagerImpl.storeSavePoint(SavePointManagerImpl.java:263)
     at oracle.adfinternal.controller.savepoint.SavePointManagerImpl.createAndStoreSavePoint(SavePointManagerImpl.java:228)
     at oracle.adfinternal.controller.savepoint.SavePointCreateListener.windowClosed(SavePointCreateListener.java:53)
     at oracle.adfinternal.controller.state.ControllerState.deliverWindowCloseEvent(ControllerState.java:1920)
     at oracle.adfinternal.controller.state.ControllerState.windowClosed(ControllerState.java:1931)
     at oracle.adfinternal.controller.application.WindowIdProviderImpl.windowClosed(WindowIdProviderImpl.java:221)
     at oracle.adfinternal.view.faces.context.RichPhaseListener._handleWindowClosed(RichPhaseListener.java:579)
     at oracle.adfinternal.view.faces.context.RichPhaseListener.afterPhase(RichPhaseListener.java:288)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:399)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Edited by: 912202 on Sep 20, 2012 12:44 AM

Hi Frank
Do you know of a good optician, I think I need some glasses :-)
The hight and width proprieties of the command button did the trick.
Kind Regards
Paul

Similar Messages

ADF11 - Task-Flow Run as Dialog Window Size

Hello
I've an unbounded task flow that calls a bounded task flow.
The task flow call is marked run-as-dialog
The button in the unbounded task flow that calls the bounded task flow has useWindow=True
When running the application and clicking the button the task-flow is executed in a modal browser window,
however the size of the modal browser window is way too small for the window contents.
Is there a way to control the size of the browser window opened when running a task-flow as a dialog.
Regards
Paul

Hi Frank
Do you know of a good optician, I think I need some glasses :-)
The hight and width proprieties of the command button did the trick.
Kind Regards
Paul

Problem with back button when using task flow to navigate through pages

I am using unbounded task flow to navigate through my pages
in page2 I added back button so I can back to page1 using the action A2
task flow 1
page 1 -----A1-------> page 2
page2 ----A2--------> page1
the problem when I used page2 in another task flow
task flow 2
page 3 -----A3------> page2
page 2 -----A4 -----> page3
here when I click on back button he take me to page1
how can I back to page3 ???????

For this you have to know where the user came from when he navigated to page2. You can e.g. store the back target in a variable in the session or pageflow scope (when the user navigates from page1 or page3 to page2), then you bind the back button of page 2 to the stored variable.
Timo

Malformed URL when executing task flow

Dear Gurus,
when executing a recently created task flow in my project,after authentication, I get a 401 error message. I have applied the authenitcated-role in my task flow in jan-data.xml file, so this error does not make sense.
However, i have noticed that in the formed URL there is something strange. In the adf.tfId= part of the URL, the id of the task flow mentioned is different from the adf.tfDoc= part, where the actual XML file of the task flow is mentioned. The id of the task flow in adf.tfId belongs to another task flow.
Below, the created URL is depicted
http://127.0.0.1:7101/HERA-Gui-context-root/faces/adf.task-flow?adf.tfId=gui-authentication-flow&adf.tfDoc=/WEB-INF/advanced-authentication-flow.xml&_afrLoop=14818531247046&_afrWindowMode=0&Adf-Window-Id=w0&_adf.no-new-window-redirect=true
When I manually change the adf.tfId to the id of the task flow I want to run, the task flow runs normally.
Can somebody explain me what is wrong?

Hi..
Check whether here is some point to you
http://cn.forums.oracle.com/forums/thread.jspa?threadID=1063589

What's the likely cause of crashes that occur when closing webpages?

I am experiencing frequent crashes in Safari -- almost always they occur when I try to close a webpage.
After I click on 'Close,' for a few seconds nothing at all happens. Then the spinning beach ball appears on-screen.
Inevitably, the beach ball doesn't disappear and I have to 'force quit.'
Is there any information on what lies behind this particular type of crash in Safari?
Thanks. Replies appreciated.

It looks like Safari doesn't have enough permissions
for a folder to write to. Try to open disk-utility
and use the Repair-permission option on your local
disk. This may fix the problem.
Thanks but that was recommended recently in relation to an earlier set of crashes that may have been related to an outdated Flash plugin (since updated). I went through the 'repair permissions' process and initially it seemed to have worked. Maybe it did work, but not to prevent these other crashes, which appear to be from a different source (e.g., the first crashes shut Safari down instantaneously and put me back on the Desktop, no spinning beach ball, prompt for 'crash report' to be sent to Apple, etc. -- not so with this latest set of crashes).
Assuming repairing permissions isn't something you normally have to do on an ongoing basis in order to keep Safari running properly, I'm guessing it shouldn't be required so soon again.

Task Flow Run as Dialog problem - Jdev 11.1.2.4.

We're using Jdeveloper and ADF 11.1.2.4 and have problems running task flow as dialogs(inline popup) but just on Internet Explorer(ver 8,9,10). First time when we call task flow it opens popup but dispaly error Page not found. But task flow is regulary displayed at second call, and evry other call(click on a button). And on all other browsers (Chrome, FireFox) is working normally, aswell as on 11.1.2.1 version.
I assume that problem is that for the first time BTF is not activated, but have no idea how to solve it.
I have found at Known Issues for 11.1.2.4 version that:
Popup components with the childCreation attribute set to "deferred" often render blank with the first invocation. This issue arises if you use the popup component with a region and use the setPropertyListener tag to establish the activation of the region. The setPropertyListener tag with a popupFetch type will not be invoked for the initial fetch establishing the initial content delivery. This is because the markup that defines the setPropertyListener tag is defined within the popup's body. With the option to defer creating the children, the body is not processed until the first fetch for content. The popup fetch event listener (setPropertyListener) is processed in the Apply Request Values phase prior to when it is created in the Render Response phase. The workaround is to use the "popupFetchListener" method expression (PopupFetchEvent server-side event) to establish state that would have been established using the setPropertyListener.
But still have no idea how it is connected to Run As Dialog feature of Task Flows.
Please, help us to solve this beacuse our users mostly use IE.
Thank you,
Patrik

No, there is no workaround for this. You can open a SR and let Oracle work on this. We can't do anything about it.
Why can't you install jdk 1.6?
You can have more then one jdk installed on your pc.
You can use in jdk which comes with the installation package,
Timo

Call task flow action from dialog

I want to call an action from task flow when i press OK on my dialog
it was work when i was calling it after i press on button,

if i drag task flow in page and add button in this page I can select one of the actions in task flow in the property inspector panel, ACTION filed of this button
so when i click on this button the browser will to to the destination of the action
how can i do that if i have dialog instead of button
and sorry for my bad english

When starting a new page "an unknown error has occured" when closing illustrator it creates a crash report. Tried uninstall/reinstall but it wont uninstall. Tried disable startup items, services in windows. No results.

cs4

As you can see below, when I right click, I have no such option. In the User Account Settings, I'm operating as the "System Administrator".
Any other suggestions?

How to get rid of Conifrmation when closing taskflow-call run as Dialog

Whenever I call close the browser window, If I have taskflow-call running as a Dialog I get this javascript confirmation,, which is really annoying, how can I get rid of that?
taskflow-call is running as Dialog with inline-popup
Are you sure you want to navigate away from this page?
There are one or more dependent dialogs open. Navigation from this page will invalidate any open dialogs.
Press OK to continue, or Cancel to stay on the current page.
Edited by: user626222 on Sep 21, 2010 11:03 AM

Hi user,
I'm not 100% sure but you could check whether af:document uncommittedDataWarning property is set to true. If so, try setting it to false.
Hope it helps
Barbara

How to make bean for embedded task flow stay in scope when calling TF?

I have a bounded task flow with page fragments: ManageRecommendationRuleTF.xml that defines a single managed bean with pageFlowScope: ManageRecommendationRuleBean.java
This task flow has one page ManageRecommendationRule.jsff that embeds two other bounded task flows as regions: ManageRuleTF.xml and ManageRuleConditionsTF.xml
Each of these task flows defines a single manage bean with pageFlowScope: ManageRuleBean.java and ManageRuleConditionsBean.java
From the ManageRecommendationRuleTF I call a bounded task flow: SelectTargetProductsTF.xml. When this task flow returns, the ManageRuleBean.java and ManageRuleConditionsBean.java are re-created. Why? I want the state of the beans before the SelectTargetProductTF is called. I do not want to resort to making this a session bean.
Build JDEVADF_11.1.1.5.0_GENERIC_110409.0025.6013

Hi,
the calling task flow is stacked when calling another task flow (using task flow call activity). When the called task flow is returning to the caller then the expected behavior is that the caller task flow is re-established. If this is not what you see, please provide a test case and file a Service Request with support to investigate why this is not working for you. You could e.g. add log messages to the task flow finalizers to see if when navigating off to the called task flow the two region task flows are finalized. If the regions are dynamic regions with the bean in view scope, try and change this to pageFlowScope
Frank

Retain value of component when navigate in Task Flow

Hi,
my english isn't very good
I use jdveloper 11.1.1.3.0
I define a bounded task flow and 3 view in this btf to show 3 page fragment. in each view I put 2 Input Text component.
the problem is when I navigate from one view to other view and back, the value of Input Texts is reset. Input Text doesn't bind to anything.
is any way to retain the value of Input Text and other components when navigate through views without any binding?
Habib

Alejandro T. Lanz wrote:
Hi,
One solution might be to store your values at pageFlowScope. By doing this your variables are going to be alive and with the same values as long as you are inside your bounded task flow. For example,
You can create your Java Bean and have something like:
String variable1;
String variable2;
String variable3;
String variable4;
setters and getters for those.
In your fragments the values of the inputText would be #{pageFlowScope.myBean.variable1.inputValue} and so on.
Since your bean is created once when your task flow is created (choose pageFlowScope) your variables will remain the same while your taskflow is alive.
hope this helpsIf his components are part of view objects, this shouldn't be necessary since a submit (the navigation buttons) would do the trick.

ADF Task Flow Exception Handling

Hi ,
I tried a very simple thing for taskFlow exception handling.
I created a bounded task flow with a page fragment (View1.jsff) and another view which is the TaskFlow ExceptionHandler (error.jsff).
The view1.jsff has a button whose action is bound to the backing bean. In the backingBean method I deliberately do division by 0.
Since this is an unHandled exception, I would have expected the control to come to error.jsff. But, instead I am shown a pop up box with the error message.
Why is the control not getting redirected to error.jsff ?
Thanks.
S.Srivatsa Sivan

Hi Frank , im having the same problem.
I want to handle exceptions that occur while navigating task flows (example: A user navigates to a task flow that he/she does not have view permission)
I tried using a view activity and method activity as the exception handler but none of them works, the exception is still not handles. It does not even navigate to the exception handler on the task flow.
on the view page i have:
<af:panelStretchLayout topHeight="50px" id="psl1">
<f:facet name="top">
<af:panelGroupLayout layout="scroll"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
id="pgl1">
Error message:
<af:outputText value="#{controllerContext.currentRootViewPort.exceptionData.message}" id="ot2"/>
</af:panelGroupLayout>
</f:facet>
<f:facet name="center">
<af:outputText value="#{my_exception_Handler.stackTrace}" id="ot1"/>

</f:facet>
</af:panelStretchLayout>
I tried getting the error message and stacktrace from the controllerContext via EL like this "#{controllerContext.currentRootViewPort.exceptionData.message}"
and from the controllerContext class in functions that i have declared in my_exception_Handler class like this
" ControllerContext ctx = ControllerContext.getInstance();
ViewPortContext vCtx = ctx.getCurrentViewPort();
if(vCtx.getExceptionData() != null){
StringWriter stringWriter = new StringWriter();
PrintWriter printWriter = new PrintWriter(stringWriter);
vCtx.getExceptionData().printStackTrace(printWriter);
return stringWriter.toString();"
But all this dont even matter because when the exception occurs on the task flow it does not navigate to the default exception handler.
thanks for your interest and help in advance.
Cyborg_0912

Af:table filter date format : task-flow navigation issue

hi
When trying to use the date format configured on the Entity Object, with Format Type as Simple Date and Format as "dd-MM-yyyy", there seems to be a problem when using task-flows.
The approach involves an explicitly configured attributeValues binding to use in f:validator and af:convertDateTime components in the af:inputDate in the filter facet, as discussed in the forum thread "af:table filter date format"
at af:table filter date format
I used JDeveloper 11.1.1.3.0 to create the example application
in http://www.consideringred.com/files/oracle/2010/TableFilterDateFormatIssueApp-v0.03.zip
- The page filterEmp.jspx shows expected behaviour, the filter uses the configured date format and there is no problem when navigating to another page and back.
see the screencast at http://screencast.com/t/CtQ9rsVFH3k
- The page menuBTFPage.jspx allows for some navigation after using the filter resulting in the filter showing a date in the wrong format, using scenario (sc1)
-- (sc1-a) : run menuBTFPage.jspx
-- (sc1-b) : on "menu-btf : menu", click the "do go-filter-emp-btf" link
-- (sc1-c) : on "filter-emp-btf : filterEmpFragment", filter on HireDate using "10-03-2005"
-- (sc1-d) : click the "do goReturnSuccess" button
-- (sc1-e) : back on "menu-btf : menu", click the "do go-filter-emp-btf" link again
-- (sc1-f) : back on "filter-emp-btf : filterEmpFragment", see the HireDate filter value in the wrong format as "2005-03-10"
-- (sc1-g) : click the "do goReturnSuccess" button again, which results in an error "The date is not in the correct format."
see the screencast at http://www.screencast.com/t/ORHauBd3oQ
questions:
- (q1) Can the behaviour in scenario (sc1) be reproduced?
- (q2) Why is the filter value in the wrong date format in step (sc1-f)?
- (q3) What can be done to have the filter value consistently in the configured date format, so that errors as in step (sc1-g) can be avoided?
many thanks
Jan Vervecken

hi
First a short summary of relevant aspects of service request 3-2190488381:
- development has reviewed bug 10193260
- development identified some code where a pattern was not applied and started fixing the problem
- out of the blue, development asked "Will clearing out the filter field completely when moving out of ataskflow be an acceptable behavior ?"
- I pointed out some concerns (even in a phone call with development), but development did not see any alternative not "perceived to be very risky because of the current design", so the question whether the clearing-all-filter-fields approach would be acceptable became superfluous.
- following this, bug 10193260 suddenly became an enhancement request (for reasons I still don't understand)
- a workaround was suggested (for behaviour not perceived as a bug), "Clearing the search fields during taskflow exit in the backing bean (in the app)." for which I also received a modified version of my example application TableFilterDateFormatIssueApp-v0.04.zip with an implementation of the suggested workaround
As an exercise to try an understand the suggested workaround (an because my example application seemed to have been modified using the currently yet-to-be-released JDeveloper 11.1.1.4.0) I re-implemented it in the example application
at http://www.consideringred.com/files/oracle/2010/TableFilterDateFormatIssueApp-v0.05.zip
It has a filter-emp-workaround-btf task-flow with a method-call activity on a managed-bean method, responsible for clearing the search fields, resulting in behaviour where the error "The date is not in the correct format." does not occur,
as can be seen in the screencast at http://screencast.com/t/Nq7TkkRQ
public void clearFilterFields()
    BindingContainer vBindingContainer =
      BindingContext.getCurrent().getCurrentBindingsEntry();
    DCBindingContainer vDCBindingContainer = (DCBindingContainer)vBindingContainer;
    DCDataControl vDCDataControl = vDCBindingContainer.getDataControl();
    ApplicationModule vApplicationModule = vDCDataControl.getApplicationModule();
    ViewObject vViewObject = vApplicationModule.findViewObject("EmployeesVOVI");
    ViewCriteriaManager vViewCriteriaManager = vViewObject.getViewCriteriaManager();
    vViewCriteriaManager.clearViewCriterias();
    vViewObject.clearCache();
}Because the managed-bean method requires access to the ADF Model binding layer to get to the View Object instance used for the filtered table, the method-call activity has a page element configured in DataBindings.cpx referring to the same usageId as the page element for the page fragment showing the filtered table. So that both the method-call and view activity depend on one and the same Binding Container (e.i. PageDef file).
The method-call activity, responsible for clearing the search fields, would need to be called before each task-flow-return activity.
As there can be multiple view activities with multiple filtered tables in a bounded task-flow, would that result in multiple method-call activities responsible for clearing search fields (all to be called before each task-flow-return activity)?
It looks like a more general/generic approach is desirable for the suggested workaround to be feasible.
- (q5) Does the suggested workaround imply (as bug 10193260 is not a bug) that all bounded task-flows with filtered tables should implement it to avoid errors about formatting?
thanks
Jan

Question of displaying Task Flow Region in Master-Details pattern

We have a master-details page. There is a region on the details pane along with other widgets and the content of that details pane including the region depends on the row selection on the master table list.
The first time page loads with no row selection on master table so this details pane displays nothing. When I select one row on the master table and the details pane and its region can display data of the row in master table properly.
After several selection, I navigate to another page and then go back to this master-details page again, it automatically selects the row which was selected last time. And in the details pane, the region whose content was created basing a task flow call cannot display corresponding data of the default selected row while other widgets in the details pane can display corresponding data properly.
The reason of having this problem is the region's parameter is generated before the selected row is determined. When the task flow call in page definition is parsed, the parameter of this task flow call is created before component binding of the master table. It means when the task flow call is parsed and generating the parameter, the ADF page believes there is no row selection of the master table because the component binding is null at that time.
So my question is how to make the this task flow call for that region create the task flow call parameter after the component binding of the master table? Or is there any way to force a refresh of the region/task-flow-call after the render of response? Or is there anyway to disable this "auto-select" on the master table after navigating to other page?
(My jdev version is JDEVADF_11.1.1.6.0_GENERIC_111205.1733.6192.1 )
Edited by: user790224 on Sep 6, 2012 4:16 PM

The reason we are using master-details patter here is it is designed in that way and the region is displaying the data of a selected row there.
There is no master-details relationship on model layer. But the content of the region is from the result of several other Java API calls which call the task-flow from an external component.

BUG: iPad displays 1cm border around content in task flow popup window

I have tried this out on JDeveloper 11.1.1.6.0, 11.1.2.1.0 and 11.1.2.2.0 and each one seems to have the same problem. When displaying a taskflow in-line popup windows on an iPad (iOS 4.3.5 and iOS 5.1) a ~1cm border is displayed on the left, bottom and top of the window's content, with some of the content (also about 1cm) on the right being cut-off.
I have also tried my app out on a Android Samsung Galaxy Tab (built-in browser), Android Samsung S1 (built-in) and on my Windows 7 PC in Safari and Firefox. None of these devices/browsers have this problem.
To replicate this problem the following steps can be followed.
1) Create a normal fusion web application.
2) Add a wild card control flow rule to the default unbounded task flow.
3) Add a new bounded task flow to the unbounded task flow.
4) Set the bounded task flow 'Run as Dialog' to 'true' and 'Display type' to 'inline popup'.
5) Link the wild card control flow to the bounded task flow.
6) Add a single jsf page to the bounded task flow.
7) Add a panel box to the jsf page (or any other content for that matter)
8) Create a test page and add a button to it. Set up the button's action properties such that it opens the bounded task flow as a window ('UseWindow' - 'true'; 'WindowEmbedStyle' - 'window'; 'WindowModalityType' - 'modeless' and set width and height).
Are any workarounds for this? Is there currently a available patch to fix this problem?

Hi,
Are any workarounds for this? Is there currently a available patch to fix this problem?
if nobody dares reproducing this and filing it as a bug then a fix can take a while. I'll put it on a list of my follow ups, but this is not a high priority list. So if you can I appreciate if you can file the bug and provide a testcase. Note that 11.1.2 (11g R2) is not yet optimized for tablet PCs. So JDeveloper 11g R1 (11.1.1.6) is the build that should be used as a reference for filing the bug
Frank

SavePointException occurring when closing task flow ran as dialog

Similar Messages

Maybe you are looking for