Saving changes on servlet

I have been trying to save changes on my servlets but they do not reflect, I did restart tomcat and still I cant see the changes I made. I think I am missing something what is it? or I did something wrong How do I save the changes I made to my servlets.

C'mon, these posts must be a joke. If you ARE serious, you need to state the problem a bit more clearly.

Similar Messages

Close Excel com object without saving changes?

Hi, I am trying to write a script which opens each of 31 excel workbooks, retrieves a value from a cell, and closes each workbook after retrieving.
My code so far:
$day=1
$excel = New-Object -ComObject Excel.Application
$excel.Visible=$True
$workbook= $excel.Workbooks.Open("C:\Path|to\File\1_"+$day+"_14.xlsx")
$workbook.sheets.item(1).activate()
$WorkbookTotal=$workbook.Worksheets.item(1)
$value = $WorkbookTotal.Cells.Item(7,13)
$value.Text #this should give you back the Value in that Cell
$excel.close()
My problem is that when the code hits the $excel.close() method, the file stays open, and prompts for saving changes. I don't know why it thinks there are changes, but what I want is to close the workbook without saving changes.
I've just closed 44 open browser tabs, and have tried many things over the last hour, but can't seem to get this one.
If anyone has any advice on how to do this, it would be greatly appreciated!
Thanks,
Kevin

Hi,
Please replace below code:
$excel.close()
with
$workbook.close($false)
$excel.quit()
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

Error message: "Querying or saving changes to the database failed."

Hi all,
I can sense I'm becoming a regular on this particular forum - the problem of spending 8 hours a day trying to get this software working!
_*The problem*_
When i try and setup a new device, or modify an existing one, I get an error message when i get to the Transcode Settings page. The error message is "Querying or saving changes to the database failed." After this I get a blank screen and can no longer see my settings.
No amount of restarting has fixed this. And I cannot see a way to create a device through the client software and add transcode settings.
Help?
Thanks in advance,
Ben

Ah very good!
Ok - it seems then that this works absolutely fine as a work around. I can create a device and then assign the device to transcode settings through the client adminsitration panel (which is indeed what I meant).
So, there is a work around. Far less pressing now, but I would like to know why I'm getting the error message all the same - I'm now concerned about the integrity of the database...
Thanks Tony!
B

Problem in saving changes in hosts

I am having trouble saving changes in hosts when I edit them in the terminal. So I execute the following directions:
Launch Terminal, found in /Applications/Utilities/ or launched through Spotlight
Type the following command at the prompt:
sudo nano /private/etc/hosts
Enter the administrator password when requested, you will not see it typed on screen as usual with the command line
Once the hosts file is loaded within nano, use the arrow keys to navigate to the bottom of the hosts file to make your modifications
When finished, hit Control+O followed by ENTER/RETURN to save changes to /private/etc/hosts, then hit Control+X to exit out of nano
Once I try to save my changes, the usual window opens where you can choose you file directory. I cant save it anywhere because there is no suitable file or folder that allows me to do that. I searched a bit about that and saw that I can try entering the /private/etc/hosts directory. There I can see the file of the terminal named "Terminal Saved Output" but still cant save my changes there.
Any idea what might be wrong and what I can do?

Hi,
If your using internal table to update use syntax
Update <ztable name> from table <internal table>.
if work area
update <ztable name> from <wa>.
since you want to update just zhof try using
update <ztable name> set zhof = wa-zhof where <some primary key condition>
Also check your code here:
update zco_hoff2 from it_zco_hoff2.
where as you have said earlier that your z table name is zcho_hoff2.
Just use COMMIT WORK instead of addition WAIT.
For more info write UPDATE/MODIFY in ur abap editor and do F1 on it.
Regards,
Amit
Edited by: Amit Iyer on Aug 24, 2009 10:11 AM
Edited by: Amit Iyer on Aug 24, 2009 10:12 AM

Saving Changes in Photoshop Elements 9

I have trouble saving changes I make to photos in Elements 9. When I try to Save or Save As, it says the photo is 'editing in progress,' even though I am finished with the changes. How do I save the changes?

You have to also close it to free it back up in the organizer.

How can I close a document without saving changes?

I'm using Pages 4.3 with OS10.9.1.
Before I upgraded to OS10.9.1, when I closed a document (Command W) it asked me first if I want to save the changes I'd made to the document. I had the option of saving or not saving.
Sometimes I want to close a document without saving the changes, for example if I edit a text, then decide I prefer the unedited version.
But now that I'm using OS10.9.1, when I close a document, it automatically saves any changes I've made.
How can I get back to the original option of saving or not saving changes when I close a document? This option was available with the same version of Pages, when used with an earlier OS.
I've searched the Pages Users Guide, but can't find any answer, or default settings. Pages Preferences doesn't seem to address this.
I'm not using track changes, so I don't think that's the problem.
Any solutions would be greatly appreciated!

[Viking: I am using v4.3. ... See my orginal post.]
But I found the solution, for anyone else who is having the same problem....
Open your computer's System Preferences > General, and click the box "Ask to keep changes when closing documents."
Now, when you close a document in Pages, a window will open giving you the option of saving changes or not.
(I don't know whether this works in Pagesv.5., buty it works with v.4.3)

IDVD 06 not saving changes?

Greetings. I teach an adult ed class in iLife. Unfortunately, the lab has old single 533 G4s. When we use iDVD 06, the program is not saving changes made in the different drop zones, etc. We place elements in drops zones, tell the program to save, quit and relaunch...nothing saved.
This problem was repeated by a student on his G5 at home.
Any ideas?
Thanks.
Michael Colin
Mac G4 Single 533 Mac OS X (10.4.4) Problem on G4 and G5

Hw much free space is left on the macs?
Plenty. These are very small projects we're working on.
Thanks for the response.
Michael
Mac G4 Dual 533 Mac OS X (10.3.9)

Stocks App not saving changes

My stocks app is not saving changes no matter what changes I make. After making a change, I'll exit the app, re-enter and it defaults back to a whole bunch of stuff I didn't add.
Can someone help me with this, I'm not sure where to even start!

Nadia Bielawa wrote:
This did not help at all. I'm not about to restore my iPhone and set everything up again, there must be a simpler solution.
Th simple solution is restart.
If that fails, thenreset.
If that fails, then restore from backup.
If that fails, then restore as new.
If that fails then make an appointment at the genius bar.

Day Light Saving Changes for Europe

Hi,
We are using SQL Azure databases in North Europe location.
When trying to use GETDATE() function, it is not considering the day light saving changes and brings back the time less by an hour.
Is that something that we need to or can do on the server or database
Having issues in saved records even for auditing purposes.
Any help will be highly appreciated
Many thanks
Deepu

When trying to use GETDATE() function, it is not considering the day light saving changes
Hello Deepu,
All SQL Azure server in all Azure locations (America, Europe, Asia, etc) returns for GETDATE always the same value: The current UTC date time. No time zone offset, no daylight saving, always UTC only. You can simply check it with this query:
select GETDATE(), GETUTCDATE()
Olaf Helper
[ Blog] [ Xing] [ MVP]

CM25 - Saving changes

Hi all,
I wanted to know if it is possible to do that the cm25 not leave the transaction after saving changes. Currently it return to the main menu.
Is there any note to be applied?
Thanks & regards
Giuseppe

Hello Giuseppe
It is possible if you implement the following modification note:
100114 - Navigation in capacity leveling
BR
Caetano

Sync issues - Saved changes to script do not appear saved on server

I've saved changes to a script that do not appear to save on server. Scripts show orange. Need some input here, please.

Ok, thanks. I usually switch between a netbook and laptop with updated work saved on your server. Any possibility I could get a 10 day extension on the server. It would help me to move everything over to one computer and workout my logistics. The problem is I'm an English teacher in Eastern Europe and so my resources tend to be limited.
Rick

Saving changes

Hi, I realize that edits to photos are supposed to be saved automatically, but mine are not. I edit a photo, and the changes show up in the thumbnail, but when I open the thumbnail in an edit window, I get the original picture file. I want to see an EDITED photo.
What is odd about this is that some of my photos DO get saved just fine. Others, you can change them, and they revert right back. These photos are in the same iphoto library, but they got there from a lot of different places.
Any wisdom on this?

Are you by any chance, using ESC to leave the edit mode? I found out that in full-screen mode, if you hit the ESC key, changes are discarded (you don't get the progress dialog that says saving changes)

Daylight Saving Changes 2007

Hi, I am using new_time() function in my code which takes timezone abbreviations like (PST, CST) to convet time from one timezone to other. As a part of DST changes in March 2007, do we also need to change this function to use abbreviations other than this?
I tried doing this, but it returns an error.
Can anybody help out...

Have you gone through this doc in metalink? Doc ID: Note:359145.1
Subject: Impact of 2007 USA daylight saving changes on the Oracle database

Saving Changes in QT Pro on a Samba share

Hi everybody,
i have huge problems with saving changes from a Mac (Mavericks) on a Mov-Container when the file is stored on a SMB- or AFP-Share on a Debian Server.
To be a bit more concrete:
I have a MOV-Container containing some AudioTracks which is stored on a Server with AFP or SMB (Debian Wheezy or Windows 2008 Server). When i want to change the channel-layout or other Metadata-Stuff i can´t save the changes. When i Press CTRL-S the Mac Error-Sound comes up.
I need to work with a Mac.
Does anybody have an idea, if the problem is on the Mac-Side or on specific Settings on the storage side.
Thanks in advance
Heiko

You use the command (not the control) and s keys for the Save As dialog.

My alarm on the 4g phone has not adjusted to daylight saving change.....

my alarm on the 4g Iphone has not adjusted to the recent NA daylight saving change....

I actually just solved this issue on my ICloud Calendar on my PC It was an hour ahead since 3/10/13 due to daylight savings time. My Iphone was fine.
On the ICloud Calendar click on your name. The time zone shows up. In my case it said Central Standard Time so I thought it was okay. However if you click on the Time Zone a map comes up showing the time zone. It will indicate was city in the time zone you are using. Mine had a city in Guatemala. When I switched it to the closest city to me, it solved the problem.

Saving changes on servlet

Similar Messages

Maybe you are looking for