Saving the domain file in iWeb fails. I have tried deleting the cache. I see that the file uploads to iWeb but the message is that the domain.sites2 file can't be saved. I note that duplicating the domain gives me different size files. Ideas?

I have read other discussions and my problem persists.
I note that duplicating the domain file user/library/applications support/iweb/domain.sites2 gives me files of varying sizes (I'm at around 200Mb).
I tried rebuilding the cache ../library/caches/com.apple.iweb - no change
I found a note to delete also a preference file ../library/prefernces/com.apple.iweb bt found more than one (.../plist and .../plist.lockfile) so ducked that.
The website seems to update out of sync - as if I have a domain file elsewhere (in the cloud?) that is saving on my drive later - that doesn't make sense of the comments I have read. My domain.sites2 file is stadily growing - so one interpretation is that files are being saved and the error message is the error.
This has been a problem for about a year as I have tried many alternative solutions. I;m looking fro somethign substantially different.
One repeated situation is that I write a new page and upload it. I get the usual error message. I visit the site and there is the new page. My domain (on my machine) shows no new work, so I copy the stuff on the web back to my domain and steadily the file increases in size. Bewildering.
Everything is as up to date as it can be. I don't reboot very often as my machine is rarley off.
I'm looking for different ideas and approaches.....

Although some of the following will be a repeat but try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

Similar Messages

TS3899 I "cannot Get Mail The connection to the server failed". Have tried deleting my e mail account and adding my account again but same result. Grateful for any suggestions.

I "Cannot Get Mail. The connection to the server failed." Have tried deleting my mail account and then adding again but still no mail. Grateful for any suggestions to remedy this?

I have this problem too. Anyone know why?

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors

Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help

Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help

Hi Lawrence1981,
Thanks for visiting Apple Support Communities.
You may want to check this article for additional troubleshooting steps:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Cheers,
Jeremy

I can no longer type messages. I have tried deleting to see if I have too many saves messages. That did not help. I also cut off the phone and turned back on. That did not help. Ideas?

I can no longer type messages. I have tried deleting to see if I have too many saves messages. That did not help. I also cut off the phone and turned back on. That did not help. Ideas?

http://www.bubblews.com/news/874646-apple-is-having-issues

My iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error-51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!

I was in the middle of the iOS 8 update and tried to turn my phone off (yes, I realize this was dumb) But what happened was it tried to reset. Now, my iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error -51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!

Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message.

Itunes does not open,everytime i try it says "The itunes application could not be opened. The required folder cannot be found" I have tried the shift key option but that does not work. help!!

I cannot open itunes. Everytime i try it says "The itunes application could not be opened.The folder cannot be found." I have tried the shift key option but this does not work. Please help.!!

Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Im having trouble with error 13019 I have read the previous discussions about this matter and have tried to do them except for the fact that under the music tab when clicking on my ipod every thing is frozen. It s not my comp. and i dont wish to restore.

Im having trouble with error 13019 I have read the previous discussions about this matter and have tried to do them except for the fact that under the music tab when clicking on my ipod every thing is frozen. It s not my comp. and i dont wish to restore. Please help!

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

Whenever I click on iTunes store, it just takes me to this huge add to download the new version of iTunes. I have tried clicking the download box and downloading it, but it still will not let me past the add so I can buy music. What gives

Whenever I click on iTunes store, it just takes me to this huge add to download the new version of iTunes. I have tried clicking the download box and downloading it, but it still will not let me past the add so I can buy music. What gives

this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account and reseting it and it still only picks up the old messages? Anyone else having tis problem? ANy ideas how to fix it?

My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account (a number of times..) and setting the account back up? and it still only picks up the old messages? Anyone else having tis problem? Any ideas how to fix it?
This just started happening for no reason...no changes to the phone or Ipad?

my iphone and ipad will not send or receive emails or messages for the last few days. it is telling me that cannot connect to server

I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. Any thoughts?

I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Any thoughts?

Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.

I get this error message when trying to start Itunes - "Runtime Error! Program: C:\Program Files\iTunes\iTunes.exe R6034 Anapplication has made an attempt to load the C runtime library incorrectly. I have tried to have iTunes re-install and correct.

I get this message when I try to start iTunes
Runtime Error!
Program: C:\Program Files\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime Library incorrectly.
I have tried to have iTunes re-install but still get the error.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it. I need the videos out of there. I have tried every way I can think of.

Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Help

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

HT203171 My curser pad is not working and the curser is going crazy. I have tried all of the above but it still does not work

My curser pad is not working and the curser is going crazy. I have tried everything and it still does not work?

I don't know what other solutions you've tried but on mine it was like a "Ghost in the Machine" (moving around and clicking on things on its own) and all I did to fix it was to lightly dampen a cotton ball with window cleaner (evaporates) and clean firmly around the inside edge of the pad and to also click it firmly quickly and many times to clean out ANY kind of dust or debris that has fallen into the cracks. worked GREAT for me , so far!!???

When I click the Sections button then click on the 1st page I get a page that is titled "Lorem ipsum dolor sit amet"! Where did it come from and how do I get rid of it. I have tried deleting and "dont save" but it comes back.

In Pages when I click the 'Sections' button then click on the 1st page I get a page that is titled "Lorem ipsum dolor sit amet"! Where did it come from and how do I get rid of it? I have tried deleting and "dont save" but it comes back. It is a full page in some unknown language. The only thing I can decifer is 'cupy uf cak'. Rdal

Roger,
The icon is +Sections, not just Sections, as in "Add a Section". When you click that icon you get a section break and and a new section template, complete with preformatted text called placeholder text. The reason "Lorem ipsum" is there is so you can see what the format looks like. The reason that it is Latin gibberish is so you won't get hung up on, or distracted by, what it says. It's just a display of format. Select the "Lorem ipsum" text and start typing your content.
Jerry

Saving the domain file in iWeb fails. I have tried deleting the cache. I see that the file uploads to iWeb but the message is that the domain.sites2 file can't be saved. I note that duplicating the domain gives me different size files. Ideas?

Similar Messages

Maybe you are looking for