Says I am not an administrator when I am the only account on the computer.

I am unable to download anything on my computer because it says I do not have administrator rights, but I am the only account on the computer and am labed as the admin. What is wrong and how do I fix it?

What exactly did you do that caused an error, and what exactly was the error message? E.g., did you try to drag an item from a folder to the Applications folder in the Finder? What was the source folder and what was the item?

Similar Messages

HT2648 I want to Repair Disk Permissions, but I do not have disk utility 10.4.3 on my Mac os X. How do I download it? Why did I not get it when I purchased the computer 2 years ago?

I am having frequent pop-up boxes. It is very annoying. It was suggested that I repair permissions, but when I try, my 2 year old computer. with OSX operating systems has an old desk utility, and I cannot use it. How do I acquire disk utility 10.4.3?

Any reason why you have not updated to the final version 10.4.11 of Tiger?
General advice on updating Tiger:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs here: http://support.apple.com/kb/DL172
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
[b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

My iPod does not work properly when plugged into the computer. How to fix?

I have a 4th generation 40 gigabyte iPod, non-color.
Today, I plugged it into my computer to update my playlists.
My iTunes and Windows were lagged down. Eventually, when things caught up, my iTunes didn't show my iPod as being connected. I looked in My Computer, and it didn't say iPod -- it said "Removable Disk". I couldn't disconnect my iPod via Windows, even using the Safely Remove Hardware didn't work.
After looking around here and trying things like Disk Mode and Resetting the iPod, nothing worked. I can't get the iPod to work with the iPod Updater so I can try restoring it.
I dunno really what to do. If it's a hardware problem, then I'm not going to bother to get it repaired, since the music that's currently on it plays perfectly fine still.
I just dunno what else to try.

you basically are stuck. apple won't do crap for you. i went to the apple store today because my second ipod crashed (the first one they replaced) and they won't do anything for me and told me i had to buy a new one (2 in 1 1/2 years is what happened) so they wanted me to buy a third one when their product obviously *****. and the manager even basically admitted that the ipod that they claim is durable and relible isn't. that people go through 3-4 a year. the supposed "apple genius" told me to send it out to a third party repair. he wouldn't even look at it and lectured me for not getting the extended warranty. if you look at the website below and read you'll find that a lot of people got screwed over like me with the extended warranty;
http://www.consumeraffairs.com/computers/apple_ipod.html
put it this way i won't go back to that apple store again or purchase another ipod. ill keep my piece of none working crap

Why will my ipod not sync fully when attached to the computer and comes up with a session could not be started with this ipod?

Please help my ipod touch is no longer syncing to my computer fully and comes up with "unable to start a session with ipod" and the ipod sign disappears when you try to click on it to see what's happening.
Thanks

Try:
iphone could not be synced sync session failed to start...: Apple Support Communities
Sync Session Failed to Start iTouch iOS5: Apple Support Communities

On i-pad, when try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no my request and item not available in the U.S. store. WWJD?

On i-pad, when I try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no to my request and, "item not available in the U.S. store." My Mac will not use update iTunes to any later version than the one I have because my os is also out of date, but when I try to update that i cant, so what do I have to do? Please don't tell me I have to buy a new Mac to be up to date.

On the iOS device you must be logged into the store with the exact same Apple ID you used to originally purchase the service. Go to Setting > iTunes & App Stores and if necessary sign out/in and then enable iTM.

HT5676 I seriously have uninstalled and reinstalled a dozen times and it still says I do not have Jave when I try to play games but it shows that my Java is enabled in the Safari preferences

I seriously have uninstalled and reinstalled a dozen times and it still says I do not have Jave when I try to play games but it shows that my Java is enabled in the Safari preferences

Follow this links process to enable the Java Preferences Panel and allows you more control.
http://support.apple.com/kb/HT5559
Also, try a game called Supremacy1914 and run that game. Its an outside browser game (Essintially) that runs via Java. It should give you a security option to allow the certificate to play the game. Some games require certificates and depending on your user account, it could be blocked.
Java panel is now stored in the System Preferences > Other

My computer is not recognizing my ipod shuffle. The computer says to use the ipod reset utility. When I tried doing this it told me that it was for a 32 bit version which I obviously do not have. My computer is only a few months old. What do I do now?

My computer is not recognizing my ipod shuffle. The computer says to use the ipod reset utility. When I did that it came up with another message that it was only good for a 32 bit version. I guess I do not have a 32 bit version. I just purchased my computer a few months ago and it uses the windows 7 operating system. What do I do now?

Not sure if this helps:-
The music files, were they bought from your iTunes account or did someone gift them to you after buying from the iTunes account? If they are yours you can download them again if you clear or de-authorise the ipod, it has to be done by whoever gave you the ipod to do this (the registered owner). If they were bought for you on another itunes account I don't think Apple let you use them as they are copyrighted and they don't belong to you, they belong to the person who bought them. If the music files where ripped from music cd's then click and drag them to a new folder on your desktop and have the person who gave you the ipod to de-authorise and unregister it. Then you re register it and put your files back from your desktop folder in your iTunes folder and synch. Hopefully that would work. Any files which you did not buy, I would not know how get around this, best bet is to take it to you nearest Apple Store and explain that they were gifted to you and ask how you can use them. The best way to gift music files is to buy the gift tokens and give these. Hope above helps.

Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen that connect to itunes. so when i connect my iphone to iTunes, it says"itunes has detected

Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
Thank you for your help and time.
Regards,
hopeless

If you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.

I get an error when trying to sync my music. It says I do not have enough access privileges for the operation.

I get an error when trying to sync my music. It says I do not have enough access privileges for the operation.

Follow this instruction exactly to the last line. It worked on mine.
Jolly Giant wrote:
daduser wrote:
"copying files failed, because you don't have permission to change your ITUNES media folder or a folder within it."
check if you have read & write permissions for your iTunes music (or media) folder. in finder, right-click on it and +get info+. unlock the little padlock (you may have to enter your admin password) and change the permission settings. if permissions settings check out, click on the little gear-shaped icon and +apply to enclosed items+ like so
now try consolidating again.

What can I do if my iphone4 is not turning on and itunes is saying "Session could not be started" when I want to sync it so I can restore my phone?

What can I do if my iphone4 is not turning on and itunes is saying "Session could not be started" when I want to sync it so I can restore my phone?

Hold down your on/off and home button until you see the Apple logo, but first plug your iPhone into a power outlet to make sure it has enough battery power.

Clickinstagram is telling me to change my password and when i 'Forgot Password?' then 'reset using facebook' a pop up comes up saying 'We could not find any instagram linked to your facebook account. Try searching for your username or email instead'.

instagram is telling me to change my password and when i go on 'Forgot Password?' then 'reset using facebook' a pop up comes up saying 'We could not find any instagram linked to your facebook account. Try searching for your username or email instead'. but i forgot the the password to the email i used for it:/ help me!!

http://help.instagram.com/

I have a Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power off button. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Any ideas?

I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
<E-mail Edited by Host>

Hi John,
That's often a sign of a bsad Capacitor in the Power Supply, but...
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

I am getting the message "The windows installer Service could not be accessed when trying to install Itunes on my new computer, any help would be appreciated.

I am getting the message "The windows installer Service could not be accessed when trying to install Itunes on my new computer, any help would be appreciated.

Hey there Frank0619,
If you have not been able to install iTunes because the Windows Installer service is not available, I would recommend the troubleshooting in the following troubleshooting to help.
Issues installing iTunes for Windows
These in particular:
Make sure you have an administrator account.
To install iTunes, you'll need to log in to your computer with an administrator password. If you're not sure if you have an administrator account, read Windows 7: How do I log on as an administrator? You could also refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Install the latest Microsoft Windows updates.
To download the latest updates, visit the Microsoft Windows Update website. iTunes for Windows requires Windows XP, Windows Vista, Windows 7, or Windows 8 with the latest Service Pack installed. If you can’t install the updates, refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Download the latest version of iTunes.
The latest version of iTunes can be downloaded at http://www.apple.com/itunes/download/.
Disable conflicting software.
Some Windows background processes can cause issues for other programs and processes. These conflicts can prevent applications, such as iTunes, from installing. Disable conflicting processes by starting your computer using MSConfig:
Using Msconfig to troubleshoot conflicts in Windows XP
Using Msconfig to troubleshoot conflicts in Windows Vista, Windows 7, and Windows 8
Some security software made by other companies can't be disabled using MSConfig. If you've installed security software and you're having issues installing iTunes or QuickTime for Windows, you might need to disable or uninstall security software to resolve installation issues.
Restart your computer.
Install iTunes.
Thank you for using Apple Support Communities.
All the best,
Sterling

I am trying to install itunes for my mobile, and I keep getting the message "You do not have administrator rights, please contact the system administrator to preform an update." I have it set as adminstrator as the user.

I am trying to install itunes for my mobile, and I keep getting the message "You do not have administrator rights, please contact the system administrator to preform an update." I have it set as adminstrator as the user. I am running Windows 7 Ultimate. Help please?

Thanks, but I've done that several times & it still says I need administraive privileges. I had itunes installed with no problems until I did the latest update. After that it just disappeared, so I tried reinstalling. Now I can't sync my phone. This is so frustrating!

I have spotty signal at my home, so some functions don't work until I leave the house. I noticed on the main screen, it says I have 54 emails, but when I open the app, I only have 4. I powered down and back up. No fix. What gives?

I have spotty signal at my home, so some functions don't work until I leave the house. I noticed on the main screen, it says I have 54 emails, but when I open the app, I only have 4. I powered down and back up. No fix. What gives?

Im having this same problem an my phone is about 3 weeks old. I am not sure about the voice over part though...I have not yet figured out how to work the voice recognition part of the phone...I am such a newbie with this phone. I did the power off/on suggestion, several times. I tried leaving it off for 10 minutes. Tried to reset with the power on/off and home button pressed at the same time. Charged battery. Still makes no difference. You cannot scroll any direction. Have to double click to open apps. Have to double click letters when texting or emailing in order to get the letter in the text box. Can scroll through app choices, have to click on the line with the dots in it and move from page to page. Can't access the settings - > general - > accessibility - because it won't allow me to scroll down to "general".
Anyone help you with your fix yet?

Says I am not an administrator when I am the only account on the computer.

Similar Messages

Maybe you are looking for