SB live! with ME sound too l

Hello @ll,
can someone help me? (sorry, my english is bad ;-)
Every systemsound comes too late, sometimes 2 or more seconds later as the window of eg. a warning message...and at this time the sytem freezes for this few seconds...
The same is, when I plaback a *.wav!
Maybe this information can give you the indication:
On dxdiag I had some sounds directly, other later... I tested it again and the sound now comes directly...
sometimes I hear something like an echo or switching problem, when I work fast and sounds overlap...
thanx

And, you can be certain it's not a Li've! 24-bit. They didn't make them back then! It's either a Li've! 5. (probable) or a Li've! 4. (unlikely if the computer was really manufactured in 2000).
You can try removing anything that was possibly added by your using the cd, then letting XP install its nati've driver for it. I would download DriverCleaner from driverheaven.net. If there's nothing in Add/Remove Programs (as there probably isn't if your attempt to install the cd version of the driver (provided by Gateway?) failed before finishing), then go into device manager and remove anything related to the card and reboot to Safe Mode and run DriverCleaner. Delete the Creative Folder in Program Files that your cd probably made. Reboot and let XP install its driver. Reboot again.
That's probably the best your going to get if Gateway didn't update the Creative software for SP2. You could attempt to install the Li've Uni-Pack stuff from the download section here, but it might or might not work on the OEM card you have. If the software on your Gateway/Creative cd had problems then your probably going to just be able to use the nati've Windows XP driver. You will still be able to adjust your settings with the Windows audio controls, but won't be able to use Creative software.
You would need to contact Gateway to see if they really don't have a package for this. Did you check their website for updates for your model?

Similar Messages

1080 50p live with sound - have no sound in PP 5.5

Hello
Filmed a clips with Pany AG - AF101 - 1080 50p live with sound (not a slow motion) ..... when i put clip on time line i dont get sound - i dont even get a separate sound line like if there is no sound at all.
but when video is played inside camcorder - there is sound.
also i tried that file in my other soft - Corel Video Studio X4 pro - and there is sound - plays it no problem
so why no sound in PP 5.5? what i do wrong ? plz help!
Regards

What are you editing, and does your project match your video?
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Can someone please help me with a Sound Blaster Live Probl

I have an older sound blaster Li've card. It stopped working so I tried to install new drivers for it. That diddnt work. I tried to let creative labs web sight try to do it automaticly, but it says no creative labs sound device found. So I took a working card, "The same Kind" and put that one in. When I restarted windows, it told me it found new hardware, but it said it diddnt want to install the new drivers that I downloaded because windows diddnt test them yet. I installed them anyway. This card does the same thing the one I took out did. When I play music in winamp I get an error No Sound Device Found. In media player I get windows cannot play this file there may be a problem with a sound of video device. I checked out my video card it seems to be working. I think I may have changed some settings somewhere but I cant seem to find anything myself. I would just upgrade but I'm afraid There might be something else wrong. Anyone can help I would aprecieate it Thanks in advance

mja8784 wrote:
I have an older sound blaster Li've card. It stopped working so I tried to install new drivers for it. That diddnt work. I tried to let creative labs web sight try to do it automaticly, but it says no creative labs?sound device found. So I took a working card, "The same Kind" and put that one in.
When I restarted windows, it told me it found new hardware, but it said it diddnt want to install the new drivers that I downloaded because windows diddnt test them yet. I installed them anyway. This?card does the?same thing the one I took out did. When I play music?in winamp I get an error? No Sound Device Found. In media player I get windows cannot play this file there may be a problem with a sound of video device. I checked out my video card it seems to be working. I think I may have changed some settings somewhere but I cant seem to find anything myself. I would just upgrade but I'm afraid There might be something else wrong. Anyone can help I would aprecieate it Thanks in advance
I would really suggest formatting your harddisk and install the os afresh. If the sound card suddenly stop working, most likely it bode signs of the os having some problem already.

How to connect to Xbox Live with the Actiontek GT704-WGB wireless router

If the title got you here, then you are probably a Verizon DSL customer who is trying to connect your Xbox to Xbox Live with the Actiontek GT704-WGB wireless router and are getting nothing but errors saying, "your NAT is set too high", or, "Your MTU setting is too low", etc. Well, after many calls to Xbox support, Actiontek support, and Verizon support, I finally came up with the solution myself.
All that is needed is a little techie know-how about router settings and you'll do just fine! However, if you are uncomfortable with doing it yourself (and it is really really easy to do!) then you can call Verizon support and have a tech support rep remotely conntect to your PC and make the changes for you: however, you have to speak with someone in advanced tech support and to do that you have to agree to a 1 year support contract to the tune of $14.95 per month in order for them to do it! Scam??? You be the judge!
So, here are the steps to take to get it working and by the way, YOU CAN NOT GET THE XBOX TO CONNECT TO THIS ROUTER WIRELESSLY!! YOU MUST CONNECT YOUR XBOX TO THE ROUTER WITH AN ETHERNET CABLE IN ORDER FOR THIS TO WORK!!! If you don't heed this warning, you will unfortunatly go through all the steps below, only to find that you get the same errors but, ethernet is faster than wireless so it's better!....right?.....right? (hears crickets chirping)....right? Oh well, I tried! Also, you must have your Xbox on in order to change the router settings (which you'll see why later) Anyway, here's the steps:
1) On your PC, open a browser window and type in the address bar: 192.168.1.1 and press enter.
2) You will then see the interface on which you will make changes to the router's settings. If at any time you are prompted for a username and password (which should happen right after you press enter) the defaults are: username: admin password: password. If you have changed these, enter what you changed them to.
3)Click on the icon on the top labelled "Advanced Setup"
4)In the left section, click "WAN IP Address"
5)At the warning screen, click "yes"
6)Scroll down until you see "MTU setting" and enter 1370. NOTElease don't be tempted to either enter 1500 or leaving it at 1500 (which is the default) because you might know that 1500 is the maximum at which this can be set which is TOO HIGH AND WILL NOT WORK! Trust me and enter 1370 and then click on "apply"
7)Click on the top icon labelled "Security"
8)In the left column, click on "applications". This is where we are going to open the 3 ports that Xbox Live uses to communicate with your Xbox.
9)In the drop down box labelled "PC Name" select "Xbox 360". This is why you had to have your console on and connected cuz if you didn't, it would not show up on the drop down list!
10)Under "category" click on the bubble next to "user"
11)Click on "New" which is one of the blue buttons near the bottom.
12)As for the rule name, I entered "Xbox" but you can put whatever you want but I'd use that so you know it's the ports you opened for the console.
13)For protocol, select TCP. (Yes you will also open the same ports for UDP but for some reason if you select TCP.UDP instead of doing them seperatly it doesn't work.....I dunno why!?
14)For all 3 "Port start", "Port End", and "Port Map Start" put the # 80.
15)Click "apply"
16)Now, select UDP and put the same port # 80 and again click "apply"
17)Repeat steps 13 through 16 except with the numbers 3074 and 53, clicking apply after each one. What you should have now on the bottom are a list of all the ports you opened, one TCP and one UDP for each number totalling 6 entries.
18)Click "back" to return to the Applications screen.
19)If you have to, select Xbox 360 for PC name, and click the bubble next to "user" and you'll now see the entry called "Xbox" or whatever you called it.
20)Click that entry to highlight it and then click the blue "add" button to the left and then click "apply" at the bottom.
21)Close the browser screen and turn off your PC and Xbox and any other hardware connected to the router.
22)Turn the router off and unplug it and wait about 5 minutes. It can take this long for any residual current in the router to dissapate and for the NAT table to clear itself.
23)Turn on the router and wait for the internet light to come on green meaning the router has booted and has an internet connection.
24)Turn on the Xbox AND ONLY THE XBOX!
25)There is no need to go into network setting as when the Xbox is connected by ethernet, it automatically configures and connects intself. You can, however go into network settings and perform a connection test but this to is not necessary.
You now should be able to connect to Xbox Live! If not, you've done something wrong and must either go through all the steps again or let Verizon do it for you (for a fee that is).

I followed jtktlw's instructions to the letter. Problem was I had already enabled UPnP before doing so. Afterward I disabled UPnP and rebooted....no change. I reset the MTU to 1500...boom, it works. Seems for me all I needed was to open the right ports to get it to work.

I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2)

I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2) this happens with other music apps too. Please I need help!

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. If it doesn't work, there isn;t much anyone here can do for you. It may be a physical problem with your speakers.

23" ACD with pink in upper right quarter of screen, live with it?

I've got a week 28 ACD that arrived as a portion of my not-yet-shipping Mac Pro order. From what I understand this is the new spec version (it certainly is very bright with vivid colors).
I've been using it for about a week and can't shake the notion that towards the upper right quarter of the screen the color is slightly more pink/magenta than the rest of the display. Frankly, this is only noticeable in gray tones—reds, greens, and blues look fantastic no matter what. Unfortunately there is lots of gray in OS X and in general the work I do tends to include gray from time to time of course!
I've used both the Apple Display Calibrator and SuperCal. The Apple one helped alleviate the very pink cast the entire screen had with the default color profile, but I found that SuperCal produced much better results giving me neutral grays across the entire screen... almost. The pink quarter (and I swear almost the whole upper half, but that might be my imagination?!??) of the screen remains EVER SO SLIGHTLY different looking.
I also have backlight bleeding that I'm prepared to live with as it's barely noticeable most of the time. I don't have any image persistence, dead pixels, etc. Is it worth either the long drive to the Apple Store or the high cost of shipping it back for a replacement? Should I not demand perfection? The problem is risking getting a WORSE replacement at a troublesome expenditure of time and money to me.
I also want to hear if anyone has the same barely-noticeable-pink-in-only-a-portion-of-the-screen issue.
PowerBook G4 15"/800MHz Mac OS X (10.4.7) 23" Cinema HD Display

Sure I have it too ... When I bough my first 23 it was pinkish overall and I finally messed about with the calibrating long enough to accept the result and live with it ... I just bought my second one and now have a pink to green gradient ... can't get rid of it ... Reading the forum I also seem to have backlight leakage and the translucency problem ... Haven't noticed a dead pixel yet ... if that one happens ... there will be a dead salesman at the store ... It's a pitty ... loyalty to Apple only goes a certain way ... thinking of buying Sony LCD's instead ... but then I read they are the same ... Maybe I just have to live with it ... and dream about the paradise holiday I will make with the profits of my edit on these not perfect displays ...

Making a DVD that works with surroung Sound

I am trying to make a DVD that works on surround a sound system (DTS system) There are 2 front speakers, 2 rear, and a sub woofer. I imported several film clips into iMovie (I believe what I did is called "down mixing") then created a Quicktime file that I imported into DVD Studio Pro. I created the disc, but the audio did not sound good. So I have been fooling around with Compressor to try to turn the audio into the correct format, and I still have not found the right combination to get the audio to sound correct. What can I do to get the disc sounding clear when I play it on the DTS system. I am assuming that there are certain steps I must make in both Compressor AND DVD Studio Pro (version 3) - I would be very appreciatvie to the person who can give me the magic formula to get everything sounding right. Thanks!

The answers posted don't fully address your question, since they are talking about AC-3, not DTS which is what you indicate you want.
First, you can use iMovie to edit the visuals, but you won't be able to use it (easily) to create the 5+1 tracks you'll need for surround encoding.
This is more a job for an actual multi-channel mixer, like BIAS Deck....
http://bias-inc.com/products/deck/
Basically, once you have each of your audio channels edited and mixed, you export each channel as an individual mono track. These are then imported into the audio encoder and assigned to the appropriate channels.
Apple does not provide a DTS encoder, so you'll need a third party encoder.
DTS sells their own...
http://tinyurl.com/6xvlb
And Surcode has one as well...
http://www.surcode.com/
DTS has a good document re: authoring surround discs...
http://tinyurl.com/kzsbx
If you can live with Dolby Digital, then you can use A.pack which is included with DSP.
-David

Recording converter for microsoft office live meeting: the sound is lost after a minute

I have a recording of a WebEx Live Meeting (ReplayMeeting.htm and all directories below) that I want to convert using the Recording Converter.
I have a problem with the sound: after a minute or so the sound is lost from the converted .wmv file.
When I play back the original, the sound is present all of the time.
When I look at the original files in the directory of the recording I see that the original video file is in one part, the original sound files are split into smaller files.
What can I do about that?

Hello,
Can you try recording the meeting on another computer with Windows integrated codecs installed and see if the issue persists.
Thanks,
Simon

Macbook pro will not pair with Vizio sound bar.

Macbook will not pair with Vizio sound bar. It has paired and worked fine in the past. in the menu bar at the top of the screen it says it is connected but it is not. when I open the bluetooth preferences and try to pair it says pairing failed. any help would be great. thanks.

Me too. sigh
All was well until this afternoon, when I swapped out the batteries on my trusty old Microsoft IntelliMouse Explorer for Bluetooth, which has worked flawlessly for me for a few years now. After I put new batteries in, my MBP wouldn't recognize it. I went through the Bluetooth Setup Assistant, and it "saw" the mouse and properly listed it as "Microsoft Mouse". I hit "continue", of course, and the Assistant said "Pairing with your Bluetooth mouse". It got as far as "Connection established" (and I saw the mouse appear in the Bluetooth preference pane", but then I got the dreaded red words: "The pairing attempt was unsuccessful. Make sure your mouse is in range of this computer, turned on and "discoverable." Etc., etc. I made sure of all of those things and tried again, many times, with the same failure every time. I tried different batteries, rebooted the Mac, and so on. No luck.
Figuring my mouse was dead, I went out and bought a Kensington Slimblade Bluetooth Presenter Mouse, brand new, never been paired with anything. Same problem!
Also, I can no longer get my Palm Treo 650 to sync via Bluetooth. It used to be a little flaky (often complained that the port was in use by another application), but rebooting the Treo always solved that. Now, it doesn't.
One trusty old mouse suddenly stops pairing, one brand-new one refuses to pair, smartphone won't sync any more. I haven't installed any system updates or anything else since the Microsoft mouse worked. The only weird thing going on is that I'm having massive network connectivity issues with my broadband connection (probably a flaky cable modem), and a couple of days ago I bought a new Airport Extreme a/b/g/n wireless router, which is at the other end of the house from my computer and now-defunct mice.
Very bizarre. Can the Bluetooth chip or antenna in a MacBook Pro burn out or otherwise fail?
Puzzled and frustrated,
:ian

A definitive answer for Creative live with no Planned Driv

It?s all what we want to have an answer...
Because no planned drivers sounds like we will never have our sb cards working in vista.
We believed that creative was the number ... i recomended all their products to my friends.... and now you forced all of us to buy a new card...
And for the people who buyed your last products you have only partial support in drivers, no extra software (creative mixer... etc).
Please a definiti've answer for us... Will be drivers for Sb li've products other that sb li've 24 bits?
Sorry for my bad english.

It?s what i said "No planned drivers for sound blaster li've"... for example i have a sound card with 5. sound ... and i think i don?t need a new sound card because i?ll use my 5. speakers (from creative too)....
But the only option i have now is to buy a new sound card or use my sound card with windows xp drivers in stereo....
My question was not when they will have a driver , my question was "if the fact of they not planned a new driver for sb li've" will have the result of sb li've unusable in Vista.

Can't launch the organizer in Elements 13. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." This happed with Elements 11, too.

Can't launch the organizer in Elements 13. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." This happed with Elements 11, too.

juliana
Do you have any version of Premiere Elements 13 or only Photoshop Elements 13 which comes with Elements Organizer 13?
Let us look at the following for Elements Organizer 13....
1. Deletion of disabling the Elements Organizer 13 setting file which is named psa.prf. In Windows 7, 8, o 8.1 64 bit, it is found in the
path
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Elements Organizer
13.0
Organizer
and in the Organizer Folder is the psa.prf file that you delete or disable by renaming it from psa.prf to psa.prfOLD.
2. If the above gains you successful entry into the Elements Organizer 13, then you can
a. create a new catalog
and/or
b. repair or optimize the current one
See Elements Organizer 13/File Menu/Manage Catalogs/Catalog Manager.
3. There are times that certain formats will bring the Elements Organizer down when you try to import those formats into
it. But, from what you wrote, your current problems do not sound media related.
3. At your earliest opportunity, please update Elements Organizer 13 to 13.1 using its Help Menu/Updates.
Please review and consider and then let us know the outcome.
Thank you.
ATR

Sound Blaster Live 5.1 , Sound Not WOrking in Windows A

Hi,
I am having a problem with my Sound Blaster Li've 5. , I get sound in applications like Media player or games but in windows xp itself I get nothing. I go to the sounds tab in the the control panel and its like it does not see the sound card, the little play button next to each windows sound is not lit. I have ininstalled the card, taken it out rebooted:angry: and reinstalled with no success..any sugestions?
thanks in advance

i guess you're using WindowsXP, huh? well, im using Win2000P. once my Life! wasnt properly recognized by windows too, so i checked for any old soundriver files. then i installed the card manually with the hardware assistant.
after that i could install the livedriverunipack from creative, and everything was fine. but of course windows should detect that card without that procedure! maybe you give it a try. (btw, dont play the with the IRQs)

I live on Puget Sound in wa.,7 out of 10 have a boat,most of use electronic software to navigate,the best only run on windows.I want to buy the new machine due to it's compact size and low power consumption. Do i load win 7 in bootcamp or virtual machine

I live on Puget Sound where most of us have boats and use electronic chart nav. software to navigate. The top software will only run on win7 or xp. Do I use bootcamp or some kind of virtual sofware and how do I load all this now that apple has stolen the dvd drive

I prefer using virtual machines for several reasons:
- Time machine backs up the virtual machine but not a bootcamp partition
- The virtual machine only takes up the room you need on the hard drive. Bootcamp uses a fixed size.
- VMWare and Parallels take care of the drivers.
- If you ever replace or upgrade your hard drive it is much easier with virtual machines. I have used Carbon Copy Cloner several times to increase the size of the hard disk.
- You can also use migration assistant to transfer the program and the virtual machine to a new computer without having to reinstall.

Go live with Release

Hello friends,
what does this question mean, "when will you go live with your Release?" and why would someone on the other team who shares the same instance ask this to me.
thanks.

Hi Ronit,
Sounds like you are going live in different phases. So, Phase 1 would be release 1 so on and so forth. This might clarify your first question. If the other person is in R/3 and you are in BI, this makes total sense but, you are a better person to analyze why they asked you this question.
Thanks and Regards
Subray Hegde

Reports of 17.0.0.169 with garbled sound and vid on rtmp streaming w/jwplayer?

Hello Adobe,
I run a website that uses live streaming rtmp to the jwplayer6 video player. Starting today, some viewers who downloaded Adobe Flash player 17.0.0.169 are getting very garbled sound and video that speeds up/slows down. This is happening on a number of users on various platforms: Win 7, Win 8.1, Linux and various browsers; Firefox, Safari, Opera, and IE (reported so far). Some folks are reporting it happens only on Firefox and not Chrome. Thoughts? How to proceed? We are telling our users, unfortunately, uninstall the latest version of Flash and rollback.
Frank P.

Hi Jeromie,
I'm and end user getting disastrous garbling and speeding via Ustream Streams.One broadcaster I watch was able to almost elimate the issue by reducing the quality of the outgoing content I believe. It would be beneficial if you contacted Ustream yourself so they can notify their subscribers of a work around.
Laurence
Sent from Yahoo Mail on Android
From:"Jeromie Clark" <[email protected]>
Date:Mon, Apr 20, 2015 at 15:01
Subject:[Installing Flash Player] Reports of 17.0.0.169 with garbled sound and vid on rtmp streaming w/jwplayer?
Reports of 17.0.0.169 with garbled sound and vid on rtmp streaming w/jwplayer?
created by Jeromie Clark in Installing Flash Player - View the full discussion
Hi Simon,
I'm really sorry to hear that your event may be impacted. I'd highly recommend that you reach out to Ustream. We would be more than happy to share technical details with them on how to configure the streams to work around the issue. We will have a public beta available for download before your event at http://www.adobe.com/go/flashplayerbeta/, but realize that this is a sub-optimal solution.
Ustream employees can send me a private message via the forums (just click my name), and I'll be more than happy to put them in contact with an engineer that can offer guidance.
Thanks,
Jeromie
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7455939#7455939 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7455939#7455939
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

SB live! with ME sound too l

Similar Messages

Maybe you are looking for