No user menu available in PI 7.1

Hi,
in a new installed PI 7.1 I logged on with my user (profile SAP_ALL), but have only the SAP menu and no user menu enabled.
I already checked table USERS_SSM with SM30 like described in note 380029, but it seems to be ok.
What is missing for enable the user menu?
Thanks and regards
Patrick

The profile is not enough also the needed role has to be added in PFCG.

Similar Messages

Workbook in role but not on user menu

Hi All
I have a workbook saved under a certain role menu. The workbook apeears fine under the role when using BEx.
However, the workbook has disappeared from the User-Menu in SAP-GUI.
I have tried to refresh the user menu, change and re-save the workbook in the role (via BEx and via PFCG), I checked report: RSWB_ROLES_REORG but nothing helped.
I searched for notes but nothing seemed relevant.
Any help?
Thanks,
Yaniv

Hi,
The issue because of MS 2007. it would not be compatible sometimes.
for that you have install the latest patch for the BEx and dotnet framework on your desktop.
it would be available in the service market place.
or
We have had several issues similar running SAP BW 7.0 with BEx 3.5 workbooks after upgrading to Excel 2007. There are several SAP Notes concerning various Excel 2007 related errors. Most of these seem to be bundled in the just-released SAP BEx 3.5 Add-On Patch 7 for SAPGUI 710, so my advice would be to download this patch if you have not done so already.
Regards,
Marasa.

Regarding the user menu

Hi Experts,
                    Can any one tell me in sap-bi i had created the role "zbcs_reports" under this role it is having the options for to execute the consolidations reports .this role consists of the folder's like consolidations under consolidations actual reports like that .here i created the one sigle user for that user i assigned this role for this role i have to assign the consolidations reports so that the user can execute the reports from the sap gui it means that the user menu .when i added this role the particular user when i am executing the user menu options giving that "no sufficient work books are found on server " this was the message it is giving .
1.first can any one tell me how i have to add the report to the user menu of the role .
2.this report should be able to add to the role like bex reports only i dont need to add like web report.
bye.

Hi ,
          As you told like that i had created the work book but here what happening means when i am assigning the report it is going to be add as an web item report .but here we required to add as an like bex analyser only means excel reports only we dont need the web items.
                      Apart from that when i am assiging the particular report to the particular user what evr the roles i am assiging to the particular user it is not availablr there .for ex here i had taken the user "madhu" for that madhu i had assigned the role "zbcs_reports" this role consists of the sub folders as you told me .but when i am trying to assigning the report to the particular user the role which i had assigned to the madhu it is not available over there .Once the role is available means i can assign the report to that the role .And that too it should be in bex format only i dont need in the web item report.
   bye.

Are printed versions of Aperture User Guides available??

Does anyone know if there are printed/bound versions of Aperture User Guides available, either through Apple or a 3rd party?
PDF's and the help menu are fine when you're on the computer and need a quick answer. However, I also like to have a nice book version to take and read at night, when traveling, etc...
I would certainly pay (a reasonable amount) for such a book, but when I explored getting the PDF printed/bound at a local Staples, they wanted some outrageous amount ($160 or so), due to it being in color and 400+ pages.
Ideally, I'd like a version similar to the "Getting Started" manual that came with Aperture.
Regards
Tom

I agree, as I often prefer to sit down and read the manuals away from the computer, etc..
I can understand why Apple doesn't ship printed versions in the box (extra cost, shipping, etc) and provides a free PDF instead. However, it seems like they could offer a printed version for a price on their on-line (and retail) stores for those so inclined to pay for it. They already have the manuals generated, they just need to make them available.
In the meantime, I guess we wait for someone to bring an Aperture 1.5 book to market. Problem there is that by the time someone else puts one out, Aperture will be up to rev 1.6 or something...
-Tom
Powermac Quad 2.5Ghz, 5GB, GeForce 7800GT Mac OS X (10.4.8)

Unable to Open Bex report from SAP APO User Menu

Hi All,
I am an SAP APO consultant, and have not miuch expereice in BEx reporting. As APO uses Build in BI for reporting and pulling history from either external BW or R/3.
Now my issue all BEx reports we use are assigned ot my user menu and when I select a report, I would expect report to open but an excel sheet opens and closes and nothing happens. However I am able to open this reports from my desktop menu selecting Business explorer and Analyzer and linking my SAP system. I use Excel 2007 , Is this some compactibilty issue or is there anything I need to do?

Hi KV,
There's a couple of possible root cause why you dont see properly the Bex Report.
Can you share to me the APO version and the BW software component being used?
In case this is still in the 3.x, 4.x APO, I think, a separate BW add on is needed for you to run your BEx report properly. You can ask your basis team for this separate installation.
Btw, is this report working before, meaning was it pulled successfully already in the past?
Can you try doing this again in a separate workstation, as the BW add on is installed separately per workstation.
Its possible that this is also an auth issue that the user you are using is not capable enough to run BEx.
As of now, I have not encountered any Bex issue that is related with the Excel version, I have tried running Bex in Excel 2007 no issue also. I think it maybe more related with the OS you are using, if its in Vista already what I know is you need to add your excel as a trusted document before you can run bex fro Vista.
Let me think of other possibilities.
Hope this helps.
- Jeff

How to get the SharePoint user context available in custom federated search connector?

Hi,
I'm investigating the possibilities for developing a federated search connector for SharePoint 2013 Online. This should allow us to search a customer's database through our custom developed application (both on premise). We intend to develop
an remote federated search connector (using OpenSearch protocol) and configure a result source in SharePoint for that connector.
The problem I'm struggling with is that I want different search results from this ressult source based on the permissions of the user that is executing the search. The admin should find a lot because he has permissions on certain items in the custom
application. The employee should find just a few because he has no permissions on certain items in the custom application. We developed the custom application ourselveds and the search in that application is taking permissions into account: it doesn't
return results if a user doesn't have sufficient permissions. That part works just fine.
However, to be able to use that, the remote federated search connector must be able to identify the user that is executing the search in SharePoint Online. So: how do I get the SharePoint user context in the remote federated search connector?
I know I can configure the replacement token {User.Name} in the result source configuration, but that gives me the name of the user only. This is insufficient to get an identity, principal, token or whatever, that let's me log in into our custom
application.
I also know that in a provider hosted app, user context is passed through from SharePoint and is known within the remote app. But since result sources need fixed (or anonymous) credentials configuration for connecting to the remote federated search connector,
all users will be using the same credentials. This makes me assume these credentials are for securing communication and cannot be used within the execution of the search within the remote federated search connector.
At the moment, I'm stuck. Any help will be greatly appreciated.
Cheers,
Ruud.

Hi,
Per my knowledge, we cannot get the SharePoint user context available in custom federated search connector with other methods.
Here is a similar thread for your reference:
https://answers.atlassian.com/questions/263735/atlassian-sharepoint-connector-federated-search-authentication-and-authorization
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

How to disable the Super User menu - (Right click windows icon menu) - Server 2012 R2 - RDS

Greetings all,
Can anyone please advise how to remove the Administrator / Super User menu that appears when you right click the Windows Icon (old start button) in Server 2012 R2 - for RDS users. I have searched and been able to disable access to each of these menu items (Control
Panel, Event Viewer, Run, etc). But I am searching for a way to completely remove the menu. This menu also appears when you use Win-X shortcut.
Hope someone can help.
Terry

Hi Terry,
You can try following points, might helpful in your case. Go to
C:\Users\Default\AppData\Local\Microsoft\Windows
there you will see file called WinX
Right click this file and copy then go to
C:\Users\YOUR_USERNAME\AppData\Local\Microsoft\Windows
then paste the file into the folder.
NOTE: replace YOUR_USERNAME with your actual username.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to Hide User Menu at the Bottom of the Screen

Hi, all:
I am new to apex, currently using 3.2.1.
I have created a simple interactive report, the screen shows report data correctly AND
a user menu at the bottom. the user menu content is:
user name
Home Application 101 Edit Page 1 Create Session Activity Debug Show Edit Links
how do I hide this menu when end user access the app?
Thanks,
John

Hi,
That "menu" is called developer toolbar.
It is visible only when you have login to APEX builder and run your app.
So it will not be visible for end users.
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

How to find the user menu of a user

Hi,
I have a request to change the description of a custom transaction in the user menu of a user. Im not sure
How to find the user's user menu...
Can we add any small documentation or comments to each object in user menu...
Thanks in advance
search before posting , it is a warning to you
Edited by: Vijay Babu Dudla on Dec 31, 2008 5:00 AM
Edited by: Vijay Babu Dudla on Dec 31, 2008 5:05 AM

Welcome to SCN.
Just refer: [Area Menu Maintenance |http://help.sap.com/saphelp_nw2004s/helpdata/en/00/783b377bfdcf61e10000009b38f936/frameset.htm]

What are the user exits available related to Credit Management?

What are the user exits available related to Credit Management?
I have blocked users from releasing SO through Tciode VKM3 , now I want to block
the same (releasing of SO through VKM4) ,I want VKM4 to be used only for releasing delivery orders. Can anyone help me in configuring the same?.
Thanx in advance,
Regrds,
Binayak

Hi,
User Exits For Credit Checks And Risk Management
Credit Check
If you want to carry out your own individual credit checks, that differ from those in the standard system, you must define them in the following user exits:
LVKMPTZZ
LVKMPFZ1: USER_CREDIT_CHECK1
LVKMPFZ2: USER_CREDIT_CHECK2
LVKMPFZ3: USER_CREDIT_CHECK3
User exit for availability check
User exit USEREXIT_AVAIL_CHECK_CREDIT exists in Include MV45AFZF.
This user exit allows you to determine whether the system should or should not carry out an availability check after a blocked document has been released or after a new credit check.
Risk Management for Receivables
RVKMPUS2
Using this user exit, you can define new forms of payment guarantee.
Regards,
Amrish Purohit

Transaction code for user menu, sap easy access

Hi system experts!
Does anybody know which transaction causes the user-specific menu within "SAP easy access" (the welcome screen after login, like /n does) ?
I need it to be called from a portal iView, so that the usual sapgui-like screen with the user's menu appears in a portal screen, both for SAPGUI for windows and http.
Trx. S000 or SESSION_MANAGER does not cause the user-specific menu when called from the portal. These work least of all for call via ITS.
thanks
Andreas

hi ,
The transaction code is SE41.. This is for creating Menus and tool bars.
you can also try SMEN it will call the user menu as you described in your post.
Regards,
Krishna
Message was edited by: Krishnakumar

Understanding the User Menu in XI

hi,
I am pretty new to XI (as you can probably tell by few queries i have posted).
When you log in to your XI SAP system, the system essentially displays a "User Menu", which includes many folder with different options for monitoring, sld, runtime settings, configuration,...etc.
Just curious to find out what each of the options on the user menu does and more so when would you actually use those options. Have tried to click on some of the options and get familiar with them. But is there a more specific document provided by SAP that explains each functionality (besides maybe the documentation help).
Also speaking as a beginner, what is a good strategy to get more acquainted and understand XI? Your thoughts would be appreciated.
Regards,
Manpreet

Hi,
Apart from help.sap.com, u have very good Articles in the articles section which will speak about Design, configurations, Adapters, Runtime and all u need in different pdf files and ppts. all u need to do is go to Articles section and serch for the Right document that u need. ( i cannot mention all the pdf file names here.. it will fill the whole page ).
also when u go to XI home page, u will find
e-learning link on the righthand side. Listen to the Beginners section.This will also help u a lot.
While creating scenario's u can look at the weblogs section of XI. and its a knowledge repository ( help.sap.com made simpler )
all the above mention links help u in understanding XI better. But u should start working on
1) simple File to File
2) File to DB and other simple scenario's to really get how things work in XI.
The best part is u already have weblogs (step-by-step procedure ) mentioning these.... )
For the rest u have XI forum )
Hope this helps you.
Cheers,
Siva Maranani.

I am loging in SAP. Initial screen come where it display User Menu and Sap

Dear All,
When i am loging in SAP. Initial screen come where it display User Menu and Sap Menu, but User menu is in active not showing but T code are executing then what object i have missed.
can u help me?
Thanks,
Regards,
Sachin

Hi Sachin,
It doesn't care if you're using SAP_ALL or any of those profile. That is not relevant. I had that case a few days ago, I'm not using any of those profiles and I made it work with help of one post.
If you put the transactions in the tab "Menu" of the role in the PFCG, and if you activate parameters I mentioned in a prior post, then you should see the Menu.
Tables SSM_CUST and USERS_SSM. The first is global and the other is user-especific.
The link in one of the first post of this thread hace all the info.
That should work, that worked in my case.
What values the parameters have on those tables? The more the info the better.
Updating the parameters on those tables should help. If still doesn't work then you should check another parameter using transaction RZ10 or report RSPARAM.
If my info solves your problem, points are appreciated, if not, we will try...
Jose

How to create a duplicate of the Manager ID field in the Create user menu

Hi,
I´m trying to create a duplicate of the Manager ID field in the Create user menu (with a different label). I need to add it a field with the same funtionality of the Manager ID field (search users with filters) but I don´t know how.
I try to made a new adapter using the Thor.API.Operations.tcUserOperationsIntf but it don´t let me to map the input parameters.
Also I try to assing an existent Lookup to a new UDF, but I couldn´t find the correct one.
Did anybody do that??
Thanks!

Hi Kevin,
First I created a a user defined field called USR_UDF_CONDUCTOR (Lookupfield type).
Then I added the following lines to de FormMetaData.xml file:
</Attribute name="-750" label="global.label.conductor" displayComponentType="LookupField" variantType="long" dataLength="50" map="USR_UDF_CONDUCTOR">
<ValidValues lookupMethod="findUsersFiltered" operationClass="Thor.API.Operations.tcUserOperationsIntf" displayColumns="Users.User ID,Users.Last Name,Users.First Name" selectionColumn="Users.User ID"/>
</Attribute>
<AttributeReference editable="true" optional="true">-750</AttributeReference>
When I try yo Create a new user, the OIM System Administrator returns a System Error.

Slow loading of User Menu While Logon

Hi,
I have created a new role with customized user menu. After assigning this role to my users, they start complaining about a very slow login to SAP as well as when opening a new session!
Any hits would be greatly appreciated ..
Sheikh

Dear Sheikh,
To confirm the issue, use transaction STAD and filter by response time of the users - does it fit to the times which they experience? If the users experience higher than the STAD response time, then it could be a browser side issue (or network issue) which somehow ovelapped with the change of role, but is not related to the change of roles.
If STAD time is high, then look at the CPU time and DB Time - take ST30 and ST05 traces to narrow down the issue. Is it possible that you activated Authentication trace on the ABAP server and then did not switch it back?
Best Regards,
Sylvia

No user menu available in PI 7.1

Similar Messages

Maybe you are looking for