Sbconsole dashboard error - Console Exception
Hi all, I just installed oracle service bus on fedora 11 platform. It successfully installed and run well in functional. But in dashboard there is an exception
that made the tab provided cannot be viewed.
Console Exception :
Message com/bea/alsb/console/dashboard/ui/ChartUIRenderHelper
Type java.lang.NoClassDefFoundError
this is the link error above :
http://picasaweb.google.com/lh/photo/cU2E_aqGUW-29TV2ny-xQQ?feat=directlink
Really thanks in advance
Regards,
Kahlil
Can you try to open a test debug window for any of the business and proxy services?
It seems the the console app is not able to gather monitoring data. Which could be a problem with the specific application module for monitoring or may be a firewall issue. If you are able to open the test console window properly then it most probably is an issue with the monitoring module.
Similar Messages
-
I opened tools-error console and have hundred of warnings & exception - shall I delete them
I have been running Malware virus and Spybot and they usually show I have six Trojans. These problems seem to have started when I ordered a book from Amazon. or maybe something from HSN
You can ignore (CSS) errors in the Tools > Error Console.<br />
Those errors are only useful if you develop websites and want to check the HTML/CSS and JavaScript code for errors.<br />
Most errors are code for other browsers like IE or browsers on other platforms or just typos or the result of bad coding.<br /> -
Weblogic Admin Server Crash while accessing sbconsole dashboard
I'm having this issue where the Admin Server crash when I try to access sbconsole Dashboard page.
There is no exception or strack trace before it crash, it just crash and admin server got restarted.
I've noticed error stack trace for the below when admin server is running. Not sure if this is related. Any advice appreciated. Thanks.
####<Feb 27, 2013 6:31:31 PM CST> <Warning> <RMI> <aussoadrapp01.us.dell.com> <svc2_osb_dr_admin> <[ACTIVE] ExecuteThread: '1' for q
ueue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <f64e2b8deea602d6:-59f22bd:13d1e08e8c0:-7fc2-0000000000001ba8> <136
2011491185> <BEA-080003> <RuntimeException thrown by rmi server: javax.management.remote.rmi.RMIConnectionImpl.getAttribute(Ljavax.m
anagement.ObjectName;Ljava.lang.String;Ljavax.security.auth.Subject;)
javax.management.RuntimeMBeanException: java.lang.IllegalArgumentException: null id.
javax.management.RuntimeMBeanException: java.lang.IllegalArgumentException: null id
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.rethrow(DefaultMBeanServerInterceptor.java:856)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.rethrowMaybeMBeanException(DefaultMBeanServerInterceptor.java:869)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:670)
at com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:163)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319
at javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:600)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:590)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.lang.IllegalArgumentException: null id
at com.bea.wli.sb.util.RouterElement.<init>(RouterElement.java:214)
at com.bea.wli.sb.util.RouterElementFactory.traverseAction(RouterElementFactory.java:168)
at com.bea.wli.sb.util.RouterElementFactory.traverseActionSequence(RouterElementFactory.java:88)
at com.bea.wli.sb.util.RouterElementFactory.traverseStage(RouterElementFactory.java:152)
at com.bea.wli.sb.util.RouterElementFactory.traversePipeline(RouterElementFactory.java:142)
at com.bea.wli.sb.util.RouterElementFactory.traversePipelineNode(RouterElementFactory.java:129)
at com.bea.wli.sb.util.RouterElementFactory.traversePipelineFlowType(RouterElementFactory.java:66)
at com.bea.wli.sb.util.RouterElementFactory.toRouterElement(RouterElementFactory.java:49)
at com.oracle.osb.emsupport.impl.ServiceHelper.getPipeline(ServiceHelper.java:228)
at com.oracle.osb.emsupport.impl.ServiceHelper.getProxyServiceConfiguration(ServiceHelper.java:109)
at com.oracle.osb.emsupport.impl.ServiceHelper.getConfiguration(ServiceHelper.java:73)
at com.oracle.osb.emsupport.api.ResourceConfiguration.getConfiguration(ResourceConfiguration.java:83)
at sun.reflect.GeneratedMethodAccessor839.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at com.sun.jmx.mbeanserver.StandardMBeanIntrospector.invokeM2(StandardMBeanIntrospector.java:93)
at com.sun.jmx.mbeanserver.StandardMBeanIntrospector.invokeM2(StandardMBeanIntrospector.java:27)
at com.sun.jmx.mbeanserver.MBeanSupport.getAttribute(MBeanSupport.java:216)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:666)
at com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:163)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319)
at javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:600)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:590)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)I'm having this issue where the Admin Server crash when I try to access sbconsole Dashboard page.
There is no exception or strack trace before it crash, it just crash and admin server got restarted.
I've noticed error stack trace for the below when admin server is running. Not sure if this is related. Any advice appreciated. Thanks.
####<Feb 27, 2013 6:31:31 PM CST> <Warning> <RMI> <aussoadrapp01.us.dell.com> <svc2_osb_dr_admin> <[ACTIVE] ExecuteThread: '1' for q
ueue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <f64e2b8deea602d6:-59f22bd:13d1e08e8c0:-7fc2-0000000000001ba8> <136
2011491185> <BEA-080003> <RuntimeException thrown by rmi server: javax.management.remote.rmi.RMIConnectionImpl.getAttribute(Ljavax.m
anagement.ObjectName;Ljava.lang.String;Ljavax.security.auth.Subject;)
javax.management.RuntimeMBeanException: java.lang.IllegalArgumentException: null id.
javax.management.RuntimeMBeanException: java.lang.IllegalArgumentException: null id
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.rethrow(DefaultMBeanServerInterceptor.java:856)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.rethrowMaybeMBeanException(DefaultMBeanServerInterceptor.java:869)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:670)
at com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:163)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319
at javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:600)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:590)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.lang.IllegalArgumentException: null id
at com.bea.wli.sb.util.RouterElement.<init>(RouterElement.java:214)
at com.bea.wli.sb.util.RouterElementFactory.traverseAction(RouterElementFactory.java:168)
at com.bea.wli.sb.util.RouterElementFactory.traverseActionSequence(RouterElementFactory.java:88)
at com.bea.wli.sb.util.RouterElementFactory.traverseStage(RouterElementFactory.java:152)
at com.bea.wli.sb.util.RouterElementFactory.traversePipeline(RouterElementFactory.java:142)
at com.bea.wli.sb.util.RouterElementFactory.traversePipelineNode(RouterElementFactory.java:129)
at com.bea.wli.sb.util.RouterElementFactory.traversePipelineFlowType(RouterElementFactory.java:66)
at com.bea.wli.sb.util.RouterElementFactory.toRouterElement(RouterElementFactory.java:49)
at com.oracle.osb.emsupport.impl.ServiceHelper.getPipeline(ServiceHelper.java:228)
at com.oracle.osb.emsupport.impl.ServiceHelper.getProxyServiceConfiguration(ServiceHelper.java:109)
at com.oracle.osb.emsupport.impl.ServiceHelper.getConfiguration(ServiceHelper.java:73)
at com.oracle.osb.emsupport.api.ResourceConfiguration.getConfiguration(ResourceConfiguration.java:83)
at sun.reflect.GeneratedMethodAccessor839.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at com.sun.jmx.mbeanserver.StandardMBeanIntrospector.invokeM2(StandardMBeanIntrospector.java:93)
at com.sun.jmx.mbeanserver.StandardMBeanIntrospector.invokeM2(StandardMBeanIntrospector.java:27)
at com.sun.jmx.mbeanserver.MBeanSupport.getAttribute(MBeanSupport.java:216)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:666)
at com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:163)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319)
at javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:600)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:590)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) -
Save all details error in Exception Block of BizTalk
In orchestration A,I make a Exception Block ,created a System.Exception object and saved Exception Error in a string and checking it in admin console.
In my orchestarion, I got amount value from a element Amount, used a custom xslt and in that custom xslt, I used a C# function for desired calculation for the value of amount.
Now when,input string of amount is not in a correct format then a error is saved regarding mapping as follows:
Transformation failed for Map A.
But the actual error is as follows:
input string was not in a correct format.
How can I get this error in exception handler block?
PrakashHi Prakash,
Like you have mentioned that you are using Custom XSLT, my advice will be that you can raise an exception from within an XSLT template, based on the value.
<xsl:message terminate="yes">Custom error text</xsl:message>
This will cause the XSLT engine to stop processing immediately, and raise an exception. This exception, including the custom error text contained within the message segment,
can be caught in the BizTalk Orchestration engine by explicitly catching an exception of type
Microsoft.XLANGS.BaseTypes.TransformationFailureException.
Refer: Biz Talk : How To : Throw Custom Exception in Map
For step-by-step explanation on this refer: Flowing clear error messages from transforms
Rachit
Please mark as answer or vote as helpful if my reply does -
bug: i have an alert("haha"); displayed from an inpage button with javascript, and while the alert message is still open, if i do a refresh i get this error in the error console:
Timestamp: 2/5/2012 12:27:27 μμ
Error: uncaught exception: [Exception... "prompt aborted by user" nsresult: "0x80040111 (NS_ERROR_NOT_AVAILABLE)" location: "JS frame :: resource:///components/nsPrompter.js :: openTabPrompt :: line 457" data: no]
it happens on every site that shows an alert dialogue box
online example:
[http://www.w3schools.com/js/tryit.asp?filename=tryjs_alert w3schools example]
press the "show alert box" button and as the alert box is open do a page refresh.I didn't realize you could reload in that situation; I thought alert() was application modal. Hmmm...
In Firefox 13 beta 4 on Windows 7 I still see the error:
Timestamp: 5/22/2012 7:41:13 PM<br>
Error: uncaught exception: [Exception... "prompt aborted by user" nsresult: "0x80040111 (NS_ERROR_NOT_AVAILABLE)" location: "JS frame :: resource:///components/nsPrompter.js :: openTabPrompt :: line 457" data: no]
I don't think it has any negative consequence. Did you just want to get it on someone's list to look at, or is it a problem for your page/application?
I looked in Bugzilla briefly and these sound related:
[https://bugzilla.mozilla.org/show_bug.cgi?id=655181 Bug 655181 – modal dialog (e.g. via window.alert()) opened with meta refresh tag refresh page in background causes this uncaught exception: "prompt aborted by user" .. resource://gre/components/nsPrompter.js]
[https://bugzilla.mozilla.org/show_bug.cgi?id=717248 Bug 717248 – Pressing backspace on alert() modal closes alert and triggers "back" functionality without firing onkeydown]
Both note the error when navigating the tab in different ways with the alert displayed. But... not much attention to them so far. -
I am getting many warning messages in the error console using Firefox V 13. This one seems to be the most prevalent. It's not causing problems except that on some machines it causes the error console to pop up and is distracting for the users. "Warning: Unknown property '-moz-box-shadow'. Declaration dropped. " My suspicion is there will always be warning messages, is there a way to suppress the Error Console in v 13 ?
If you CAN NOT be polite here in the forum, then PLEASE TAKE YOUR SORRY ARSE somewhere ELSE..
People VOLUNTEER their time here to help others, like your SORRY ARSE.. We don't do it to see Flippant responses like this...
Take this as a warning..
Thank you,
Tony Miller
Dallas, TX -
New message won't load, security error in error console
Hello. I'm posting this here in case the cause of the problem is this error item. I can receive all messages in my different folders except for the Send folder. I can sync it if I restart TB, but subsequent checks (clicking Get Mail, Download Now or Repair Folder) do not work. The error console has this item in multiple entries:
Security Error: Content at imap://van%40mymail%[email protected]:993/fetch%3EUID%3E/Sent%3E3244 may not load or link to mailbox:///C:/Documents%20and%20Settings/phoenix/Application%20Data/Thunderbird/Profiles/3t4kz4uu.default/Mail/Local%20Folders/Drafts?number=149555299&downloadType=uploadedFile&fileName=twittericon-12px.png&blockId=48d0a45894056572b1570a00285e5f4483ac9eb2e89feffd&zgId=b54d79c69095249d&mode=view.
Please help. Thanks.Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart. -
Hi All,
Console Exception
Message The server encountered an unexpected condition which prevented it from fulfilling the request.
Error opening /com/bea/alsb/console/oam/module/Module.jpf.
An unexpected error occurred.
Error opening /com/bea/alsb/console/oam/module/Module.jpf.
An unexpected error occurred.
Console Exception
Message The server encountered an unexpected condition which prevented it from fulfilling the request.
Console Exception
Message The server encountered an unexpected condition which prevented it from fulfilling the request.
Console Exception
Message The server encountered an unexpected condition which prevented it from fulfilling the request.
I couldn't start the OSB console. Please suggest for any solution.
Thanks!!I restart the server and found the below error in log file:
<Jun 17, 2014 6:01:01 PM MDT> <Notice> <StdErr> <BEA-000000> <[ERROR] DefaultExceptionsHandler - Throwable com.bea.alsb.console.common.base.SBConsoleAccessException unhandled by the current page flow (and any shared flow)
Throwable: com.bea.alsb.console.common.base.SBConsoleAccessException: The current login role is not authorized to use the console action: "/sbModules"
Stack Trace:
com.bea.alsb.console.common.base.SBConsoleAccessException: The current login role is not authorized to use the console action: "/sbModules"
<Jun 17, 2014 6:01:02 PM MDT> <Error> <ALSB Console> <BEA-494002> <Internal error occured in OSBConsole : The current login role is not authorized to use the console action: "/ViewChangeCenter"
com.bea.alsb.console.common.base.SBConsoleAccessException: The current login role is not authorized to use the console action: "/ViewChangeCenter"
<Jun 17, 2014 6:01:02 PM MDT> <Error> <netuix> <BEA-423405> <An exception [javax.servlet.ServletException: com.bea.alsb.console.common.base.SBConsoleAccessException: The current login role is not authorized to use the console action: "/sbSubModules"] was thrown while rendering the content at [/com/bea/alsb/console/oam/module/Module.jpf].
com.bea.portlet.adapter.scopedcontent.ActionLookupFailedException: javax.servlet.ServletException: com.bea.alsb.console.common.base.SBConsoleAccessException: The current login role is not authorized to use the console action: "/sbSubModules"
<Jun 17, 2014 6:01:02 PM MDT> <Error> <netuix> <BEA-423137> <There was an error loading the requested URI /com/bea/alsb/console/oam/module/Module.jpf.>
<Jun 17, 2014 6:01:02 PM MDT> <Error> <netuix> <BEA-423223> <There was an error while running a lifecycle stage :: Lifecycle: UIControl.render :: for the control :: null ::.
com.bea.netuix.nf.UIControlException: com.bea.portlet.adapter.scopedcontent.ActionLookupFailedException: javax.servlet.ServletException: com.bea.alsb.console.common.base.SBConsoleAccessException: The current login role is not authorized to use the console action: "/sbSubModules"
Thanks,
Aman -
LMSCommit Error: Communication Exception
Hi,
When some of our users play a Scorm Content from Oracle Learning Management then they get this commit Error ' LMSCommit Error: Communication Exception'
With this The class status is Incomplete and no score is passed to LMS.
Have you got this before with other systems If yes Did any one get a solution to it ?
Help is extremely appreciated. This happens on specific machines with specific users onlyMay be you can activate the Sun Java console to see the error stack. Can you check is Sun Java is checked in IE Internet option Java(Sun)?
-
Ssrs report web service to save report as pdf throws error Soap exception unhandeled by user code
I am creating a C# web application to save an SSRS report as a pdf file on my local machine.
I added the ReportService web reference as RS2005 and ReportExecution2005 web reference as RE2005.
http://myServer/ReportServer_DEVPROJECT/ReportExecution2005.asmx?WSDL
http://myServer/ReportServer_DEVPROJECT/ReportService2005.asmx?WSDL
I created the following function SaveReport that is called on button click. My report can be accessed on the report server with the following url:
http://myServer/Reports_DEVPROJECT/Pages/Report.aspx?ItemPath=%2fData+Mgmt%2fSample+Letter
On the Report Manager home page the report link appears as "SAMPLE LETTER".
It is deployed in the DataMgmt folder on the Report Manager.
It uses a data source called "DS Letter" with option "Credentials stored securely in the report server"
My application gets compiled, but I get the following run time error:
Error: Soap exception unhandeled by user code. The item '/DataMgmt/Sample Letter' cannot be found. ---> Microsoft.ReportingService
s.Diagnostics.Utilities.ItemNotFoundException: The item '/DataMgmt/Sample Letter' cannot be found.
Please check my code and let me know what I can do to run this successfully. Once this is done, I would like to get help with passing a parameter (memberID) to the generate report for that member, through this application.
Thank You in advance for your help.
public static void SaveReport()
RS2005.ReportingService2005 rs;
RE2005.ReportExecutionService rsExec;
// Create a new proxy to the web service
rs = new RS2005.ReportingService2005();
rsExec = new RE2005.ReportExecutionService();
// Authenticate to the Web service using Windows credentials
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
rsExec.Credentials = System.Net.CredentialCache.DefaultCredentials;
rs.Url = "http://myServer/ReportServer_DEVPROJECT/ReportService2005.asmx";
rsExec.Url = "http://myServer/ReportServer_DEVPROJECT/ReportExecution2005.asmx";
string historyID = null;
string deviceInfo = null;
string format = "pdf";
Byte[] results;
string encoding = String.Empty;
string mimeType = String.Empty;
string extension = String.Empty;
RE2005.Warning[] warnings = null;
string[] streamIDs = null;
string fileName = @"c:\temp\samplerHAPeport.pdf";
string _reportName = @"/DataMgmt/Sample HAP Letter";
string _historyID = null;
bool _forRendering = false;
RS2005.ParameterValue[] _values = null;
RS2005.DataSourceCredentials[] _credentials = null;
RS2005.ReportParameter[] _parameters = null;
try
_parameters = rs.GetReportParameters(_reportName, _historyID, _forRendering, _values, _credentials);
RE2005.ExecutionInfo ei = rsExec.LoadReport(_reportName, historyID);
RE2005.ParameterValue[] parameters = new RE2005.ParameterValue[1];
if (_parameters.Length > 0)
//parameters[0] = new RE2005.ParameterValue();
//parameters[0].Label = "";
//parameters[0].Name = "";
//parameters[0].Value = "";
rsExec.SetExecutionParameters(parameters, "en-us");
results = rsExec.Render(format, deviceInfo,
out extension, out encoding,
out mimeType, out warnings, out streamIDs);
using (FileStream stream = File.OpenWrite(fileName))
stream.Write(results, 0, results.Length);
catch (Exception ex)
throw ex;
protected void BtnGenReport_Click(object sender, EventArgs e)
SaveReport();Hello Devster,
Thank you to post your question on TechNet forum.
After reviewing the whole post, I have a question to you. You can access the report via the link, http://myServer/Reports_DEVPROJECT/Pages/Report.aspx?ItemPath=%2fData+Mgmt%2fSample+Letter.
From the URL, I can see that the report is located at: /Data Mgmt/Sample Letter, instead of /DataMgmt/Sample Letter. In addition, I found that the target report is "/DataMgmt/Sample HAP Letter" instead of "/DataMgmt/Sample Letter" as the error described. I
am not sure whether you post out the correct code segment.
Please check the above things on your side, and hope it is helpful to you.
Regards,
Edward
Edward Zhu
TechNet Community Support -
== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsersMark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders -
Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account. -
Hi,
i need some guides to solve this problem.
The program works fine in client DEV. However, when it's in QAS, we encounter short dump: Runtime Error DBIF_RSQL_SQL_ERROR exception CX_SY_OPEN_SQL_DB
info from short dump:
An SQL error occurred when accessing a table.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"FILL_T_DATA_TABLE" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
How to correct the error
The exception must either be prevented, caught within the procedure
"FILL_T_DATA_TABLE"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-24371: data would not fit in current prefe
buffer"
Internal call code.........: "[RSQL/FTCH/VBUK ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"ZSDR_SHIPPING_REPORT" or "ZSDR_SHIPPING_REPORT"
"FILL_T_DATA_TABLE"
If you cannot solve the problem yourself, please send the...
Information on where terminated
The termination occurred in the ABAP program "ZSDR_SHIPPING_REPORT" in
"FILL_T_DATA_TABLE".
The main program was "ZSDR_SHIPPING_REPORT ".
The termination occurred in line 3561 of the source code of the (Include)
program "ZSDR_SHIPPING_REPORT"
of the source code of program "ZSDR_SHIPPING_REPORT" (when calling the editor
35610).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "FILL_T_DATA_TABLE" "(FORM)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "ZSDR_SHIPPING_REPORT ". Its source code starts
in line 3468
of the (Include) program "ZSDR_SHIPPING_REPORT ".
source code:
035490
035500 *get all open sales orders (those that are deemed open at the Sales
035510 *Order "Header" level)
035520 clear open_orders.
035530 refresh open_orders.
035540 select * into corresponding fields of table open_orders
035550 from vbuk
035560 where ( vbtyp = 'C' or vbtyp = 'I' )
035570 and ( gbstk = 'A' or gbstk = 'B' ).
035580
035590 *get all open deliveries(some sales orders may be closed yet the
035600 *associated Delivery is not yet PGI'd)
> clear open_deliveries.
035620 refresh open_deliveries.
035630 select * into corresponding fields of table open_deliveries
035640 from vbuk
035650 where vbtyp = 'J'
035660 and ( wbstk = 'A' or wbstk = 'B' ).
035670
035680 *get sales orders associated with the Open deliveries
Please advice.
Thanks.Thanks for the response.
Hi Renga,
The error happens in second selection.
this is the souce code:
data: begin of open_orders occurs 0,
vbeln like vbuk-vbeln,
gbstk like vbuk-gbstk,
vbtyp like vbuk-vbtyp,
end of open_orders.
data: begin of open_deliveries occurs 0,
vbeln like vbuk-vbeln,
wbstk like vbuk-wbstk,
vbtyp like vbuk-vbtyp,
end of open_deliveries.
*get all open sales orders (those that are deemed open at the Sales
*Order "Header" level)
clear open_orders.
refresh open_orders.
select * into corresponding fields of table open_orders
from vbuk
where ( vbtyp = 'C' or vbtyp = 'I' )
and ( gbstk = 'A' or gbstk = 'B' ).
*get all open deliveries(some sales orders may be closed yet the
*associated Delivery is not yet PGI'd)
clear open_deliveries.
refresh open_deliveries.
select * into corresponding fields of table open_deliveries
from vbuk
where vbtyp = 'J'
and ( wbstk = 'A' or wbstk = 'B' ).
Hi Prabhu,
how to identify the problem in DB02?
Please advice.
Thanks.
regards. -
Hi,
Following code is working fine in Development system and in Production system I am getting a runtime error. Only difference I am finding is in r_lifnr value. In development system I have few lifnr and in Production system it's not so... am I getting error because of it? Is there any restriction to no. of items populated in a range? Or Basis person need to change any parameter? Enclosed the detail dump below the code...
Advance thanks.
Regards,
Balaji Viswanath.
Code:
SELECT bukrs
lifnr
augdt
augbl
zuonr
gjahr
belnr
buzei
waers
dmbtr
wrbtr
zlsch
shkzg
blart
gsber
sgtxt
INTO TABLE t_bsak_tmp
FROM bsak CLIENT SPECIFIED
WHERE mandt = sy-mandt AND
lifnr IN r_lifnr AND
bukrs IN s_bukrs AND
augdt IN s_augdt AND
blart IN s_blart.
IF sy-subrc <> 0.
No data found for selection criteria
MESSAGE i018.
LEAVE LIST-PROCESSING.
ENDIF.
Dump:
Runtime Errors DBIF_RSQL_INVALID_RSQL
Exception CX_SY_OPEN_SQL_DB
Occurred on 14.11.2005 at 14:35:22
Error in the module RSQL accessing the database interface.
What happened?
Error in ABAP application program.
The current ABAP program "/DS1/FI_CR_REPT_PGSR802_VEND_P" had to be terminated
because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"GET_CLRD_VEN_DATA" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The SQL statement generated from the SAP Open SQL Statement violates a
restriction imposed by the database system used in R/3.
Possible errors:
o The maximum size of an SQL statement has been exceeded.
o The statement contains too many input variables.
o The space needed for the input data exceeds the available memory.
o ...
You can usually find details in the system log (SM21) and in the
developer trace of the work process (ST11).
If an error occurs the developer trace often informs you about the
current restrictions.
How to correct the error
The exception must either be prevented, caught within the procedure
"GET_CLRD_VEN_DATA"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
The SAP Open SQL statement must be divided into several smaller units.
If the problem occurred due to the use of an excessively large table
in an IN itab construct, you can use the addition FOR ALL ENTRIES
instead.
When you use this addition, the statement is split into smaller units
according to the restrictions of the database system used.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_INVALID_RSQL" CX_SY_OPEN_SQL_DBC
"/DS1/FI_CR_REPT_PGSR802_VEND_P" or "/DS1/FI_CR_REPT_PGSR802_VEND_P"
"GET_CLRD_VEN_DATA"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "ztm1003"
Network address.......... "145.26.160.103"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C004DC4C00"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 6
Short dump setting....... "full"
Database server.......... "ztm1003"
Database type............ "ORACLE"
Database name............ "A94"
Database owner........... "SAPR3K"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 7 2005 20:44:35"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "85"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE
10.1.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
User, transaction...
Client.............. 110
User................ "INBVI0"
Language key........ "E"
Transaction......... "SE38 "
Program............. "/DS1/FI_CR_REPT_PGSR802_VEND_P"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "/DS1/FI_CR_REPT_PGSR802_VEND_P"
in "GET_CLRD_VEN_DATA".
The main program was "/DS1/FI_CR_REPT_PGSR802_VEND_P ".
The termination occurred in line 503 of the source code of the (Include)
program "/DS1/FI_CR_REPT_PGSR802_VEND_P"
of the source code of program "/DS1/FI_CR_REPT_PGSR802_VEND_P" (when calling
the editor 5030).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "GET_CLRD_VEN_DATA" "(FORM)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "/DS1/FI_CR_REPT_PGSR802_VEND_P ". Its source
code starts in line 501
of the (Include) program "/DS1/FI_CR_REPT_PGSR802_VEND_P ".
Source code extract
004730 &----
004740 * get country names from t005t
004750 ----
004760 FORM get_country_names.
004770
004780 t_lfa1_land[] = t_lfa1[].
004790 SORT t_lfa1_land BY land1.
004800 DELETE ADJACENT DUPLICATES FROM t_lfa1_land COMPARING land1.
004810
004820 IF NOT t_lfa1_land[] IS INITIAL.
004830 SELECT land1
004840 landx
004850 INTO TABLE t_t005t
004860 FROM t005t
004870 FOR ALL ENTRIES IN t_lfa1_land
004880 WHERE spras = sy-langu AND
004890 land1 = t_lfa1_land-land1.
004900 REFRESH t_lfa1_land.
004910 SORT t_t005t BY land1.
004920 ELSE.
004930 MESSAGE i014 WITH 'No vendor data fetched'(001).
004940 ENDIF.
004950 ENDFORM. " get_country_names
004960 &----
004970 *& Form get_clrd_ven_data
004980 &----
004990 * Cleared vendor data
005000 ----
005010 FORM get_clrd_ven_data .
005020
> SELECT bukrs
005040 lifnr
005050 augdt
005060 augbl
005070 zuonr
005080 gjahr
005090 belnr
005100 buzei
005110 waers
005120 dmbtr
005130 wrbtr
005140 zlsch
005150 shkzg
005160 blart
005170 gsber
005180 sgtxt
005190 INTO TABLE t_bsak_tmp
005200 FROM bsak CLIENT SPECIFIED
005210 * the order of the fields are as in the secondary Index.
005220 WHERE mandt = sy-mandt AND
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 59
SY-FDPOS 0 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY
SY-UCOMM
SY-TITLE Vendor Payment Details for IRD
SY-MSGTY I SY-MSGID SF
SY-MSGNO 616 SY-MSGV1 /DS1/FI_CR_REPT_PGSR802_VEND_P
SY-MSGV2 RE SY-MSGV3 EN
SY-MSGV4
Active calls / events
No.... Type........ Name..........................
Program
Include Line
Class
2 FORM GET_CLRD_VEN_DATA
/DS1/FI_CR_REPT_PGSR802_VEND_P
/DS1/FI_CR_REPT_PGSR802_VEND_P 503
1 EVENT START-OF-SELECTION
/DS1/FI_CR_REPT_PGSR802_VEND_P
/DS1/FI_CR_REPT_PGSR802_VEND_P 135Hi Balaji,
Here is what the dump said and my answers are right below them.
<i>Possible errors:</i>
o The maximum size of an SQL statement has been exceeded.</i>
This may not be the reason in your case. This usually happens when you use the option FOR ALL ENTRIES
<i>o The statement contains too many input variables.</i>
Most likely this is your issue. I think your r_lifnr is filled with all the vendors in your system and filled as single values. In that case you may be exceeding a limit set on the system. Instead of trying to remove this setting, what I would suggest is to do the following.
Define a select-option for LIFNR on your selection screen. This way users can have the flexibility of specifying certain vendors. If they don't enter anything, it is still ok. Don't fill it with single values.
Use this select-option in your select statement. After the select statement, do a delete from itab where the vendors are not in your r_lifnr as below.
DELETE t_bsak_tmp WHERE NOT lifnr IN r_lifnr.
Also, avoid using client. You don't need that unless you really want to select from a different client other than your logon client. Your select statement is using logon client anyway, so you don't need to specify that.
<i>o The space needed for the input data exceeds the available memory.</i>
If the above changes are made and the problem is still there, then this is the next thing to look at.
Srinivas -
I downloaded a program to help me with a game I am playing. I can't open the link. All I see is a blank page. I looked at the error console and it said detectFlashVer not verified. i am sot sure why it would say this. I have updated and redownloaded flash a bunch of times. I just don't know why i can't open this link.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Maybe you are looking for
-
Want to move itunes libary files
Is there no way to move the itunes library files, "iTunes Library.itl" and "iTunes Music Library.xml"? They are in a very stupid location on my computer, (a folder that should be used exclusively for work). I would really like to get the iTunes libra
-
Problem with saving/loading a file
hi everyone, i hav a program that consists of animal that are jlabels with icons and i put these animals in an array and save them. when i save the file i catch this error message: sun.awt.image.ToolkitImage when i try to load the file i catch this e
-
Username and password for imported application
Hi, I'm using webspace at apex.oracle.com for testing my application with apex 4.1.1. My application was build with apex 2.0 at my local PC. I have successfully uploaded and installed my application. But now I can't login to my application, neither w
-
What is the association between JMS Server and JMS Module in weblogic 10?
Hi, I have a created a ConnectionFactory, Queue, Topic under JMS Modules in Weblogic Server 10 using admin console. And I have created a JMS Server and Targetted to the current running server (Admin Server). But when I run the Queue Sender program it
-
Equivalent to Windows Movie Maker on Mac?
Is there a equivalent to Windows Movie Maker on Mac?