SCA BB Versio 3.6.5 issue

Hello,
I upgrade the Broadband system, include SCE 2020, CM and SCA BB from 3.0.6 to 3.6.5.
The issue is I when open SCA BB with the configuration file create in 3.0.6, I can´t make any change in the rule.
The only way to make modification is open the SCA BB whitout any configuration and begin to make the rule again.
I think, the old configuration file is awere in the new version, but is not possible work until is change to the new version.
Someone help me to find the way the migration this file too.
Thank you all.

Please post in the correct forum for this question:
https://supportforums.cisco.com/community/netpro/service-providers/others

Similar Messages

While deploying the soa components using ANT getting the 404 exception

HI
I am trying to deploy the soa composites using ANT i am getting the below exception.
Please help me as it is need very urgert for client.
Appriciate for the quick help
Exception:
ant -f build.xml deployOnlyApplication
[WARN ][codegc ] Could not acquire large pages for 256Mbytes code (at 0xffffffff60000000).
[WARN ][codegc ] Falling back to normal page size.
Buildfile: build.xml
     [echo] property file   = /opt/oracle/SampleCode
deployOnlyApplication:
    [input] Please enter Application Name:
HelloWorld
     [echo] In deployOnlyApplication ApplicationName HelloWorld
     [echo] Application Name HelloWorld
     [echo] property file   = /opt/oracle/SampleCode
deployApplication:
     [echo] deploy application HelloWorld
     [echo] /opt/oracle/SampleCode/code/HelloWorld/build.properties
     [echo] property file   = /opt/oracle/SampleCode
deployProject:
     [echo] deploy project HelloProject for environment SIT
     [echo] partition default compositeName HelloProject compositeDir /opt/oracle/SampleCode/code/HelloWorld
     [echo] build sar package
     [echo] oracle.home = /opt/oracle/Middleware/Oracle_SOA1
    [input] skipping input as property compositeDir has already been set.
    [input] skipping input as property compositeName has already been set.
    [input] skipping input as property revision has already been set.
clean:
     [echo] deleting /opt/oracle/SampleCode/code/HelloWorld/HelloProject/deploy/sca_HelloProject_rev1.0.jar
init:
scac-validate:
     [echo] Running scac-validate in /opt/oracle/SampleCode/code/HelloWorld/HelloProject/composite.xml
     [echo] oracle.home = /opt/oracle/Middleware/Oracle_SOA1
    [input] skipping input as property compositeDir has already been set.
    [input] skipping input as property compositeName has already been set.
    [input] skipping input as property revision has already been set.
scac:
     [scac] Validating composite "/opt/oracle/SampleCode/code/HelloWorld/HelloProject/composite.xml"
     [scac] info: File to validate does not exist fault-policies.xml
     [scac] info: No test suites available
package:
     [echo] oracle.home = /opt/oracle/Middleware/Oracle_SOA1
    [input] skipping input as property compositeDir has already been set.
    [input] skipping input as property compositeName has already been set.
    [input] skipping input as property revision has already been set.
compile-source:
    [mkdir] Created dir: /opt/oracle/SampleCode/code/HelloWorld/HelloProject/dist
     [copy] Copying 17 files to /opt/oracle/SampleCode/code/HelloWorld/HelloProject/dist
     [copy] Warning: /opt/oracle/SampleCode/code/HelloWorld/HelloProject/src not found.
      [jar] Building jar: /opt/oracle/SampleCode/code/HelloWorld/HelloProject/deploy/sca_HelloProject_rev1.0.jar
   [delete] Deleting directory /opt/oracle/SampleCode/code/HelloWorld/HelloProject/dist
     [copy] Copying 1 file to /opt/oracle/SampleCode/builds/${build.number}
     [echo] deploy on http://10.51.80.64:7005 with user weblogic
     [echo] deploy sarFile /opt/oracle/SampleCode/code/HelloWorld/HelloProject/deploy/sca_HelloProject_rev1.0.jar
     [echo] oracle.home = /opt/oracle/Middleware/Oracle_SOA1
deploy:
    [input] skipping input as property serverURL has already been set.
    [input] skipping input as property sarLocation has already been set.
    [input] skipping input as property password has already been set.
[deployComposite] setting user/password..., user=weblogic
[deployComposite] Processing sar=/opt/oracle/SampleCode/code/HelloWorld/HelloProject/deploy/sca_HelloProject_rev1.0.jar
[deployComposite] Adding sar file - /opt/oracle/SampleCode/code/HelloWorld/HelloProject/deploy/sca_HelloProject_rev1.0.jar
[deployComposite] INFO: Creating HTTP connection to host:10.51.80.64, port:7005
[deployComposite] INFO: Received HTTP response from the server, response code=404
[deployComposite] SEVERE: Problem in sending HTTP request to the server. Please make sure the server is up and/or check standard HTTP response code for 404
[deployComposite] ---->response code=404, error:null
     [echo] stop activate HelloProject
     [echo] oracle.home = /opt/oracle/Middleware/Oracle_SOA1/bin/..
activateComposite:
    [input] skipping input as property host has already been set.
    [input] skipping input as property port has already been set.
    [input] skipping input as property user has already been set.
[secure-input] skipping secure-input as property password has already been set.
    [input] skipping input as property compositeName has already been set.
    [input] skipping input as property revision has already been set.
     [echo] oracle.home = /opt/oracle/Middleware/Oracle_SOA1/bin/..
compositeMgrTask:
     [java] [WARN ][codegc ] Could not acquire large pages for 256Mbytes code (at 0xffffffff60000000).
     [java] [WARN ][codegc ] Falling back to normal page size.
     [java] Connecting to: service:jmx:t3://10.51.80.64:7005/jndi/weblogic.management.mbeanservers.runtime
     [java] java.io.IOException: Unhandled exception in lookup
     [java]     at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:196)
     [java]     at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:84)
     [java]     at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
     [java]     at oracle.fabric.management.deployedcomposites.CompositeManagerHelper.createJMXConnector(CompositeManagerHelper.java:91)
     [java]     at oracle.fabric.management.deployedcomposites.CompositeManager.initConnection(CompositeManager.java:48)
     [java]     at oracle.fabric.management.deployedcomposites.CompositeManagerAntWrapper.execute(CompositeManagerAntWrapper.java:221)
     [java]     at oracle.fabric.management.deployedcomposites.CompositeManagerAntWrapper.main(CompositeManagerAntWrapper.java:275)
     [java] Caused by: javax.naming.NamingException: Unhandled exception in lookup [Root exception is org.omg.CORBA.NO_PERMISSION:   vmcid: 0x0 minor code: 0 completed: No]
     [java]     at weblogic.corba.j2ee.naming.Utils.wrapNamingException(Utils.java:83)
     [java]     at weblogic.corba.j2ee.naming.ContextImpl.lookup(ContextImpl.java:291)
     [java]     at weblogic.corba.j2ee.naming.ContextImpl.lookup(ContextImpl.java:227)
     [java]     at javax.naming.InitialContext.lookup(InitialContext.java:392)
     [java]     at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:179)
     [java]     ... 6 more
     [java] Caused by: org.omg.CORBA.NO_PERMISSION:   vmcid: 0x0 minor code: 0 completed: No
     [java]     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     [java]     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     [java]     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     [java]     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     [java]     at java.lang.Class.newInstance0(Class.java:357)
     [java]     at java.lang.Class.newInstance(Class.java:310)
     [java]     at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.getSystemException(MessageBase.java:897)
     [java]     at com.sun.corba.se.impl.protocol.giopmsgheaders.ReplyMessage_1_2.getSystemException(ReplyMessage_1_2.java:99)
     [java]     at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.getSystemExceptionReply(CorbaMessageMediatorImpl.java:572)
     [java]     at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.processResponse(CorbaClientRequestDispatcherImpl.java:471)
     [java]     at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(CorbaClientRequestDispatcherImpl.java:358)
     [java]     at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.invoke(CorbaClientDelegateImpl.java:129)
     [java]     at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:457)
     [java]     at weblogic.corba.cos.naming._NamingContextAnyStub.resolve_any(_NamingContextAnyStub.java:80)
     [java]     at weblogic.corba.j2ee.naming.ContextImpl.lookup(ContextImpl.java:267)
     [java]     ... 9 more
     [echo] unit test HelloProject
     [echo] finish
     [echo] property file   = /opt/oracle/SampleCode
deployProject:
     [echo] deploy project Project1 for environment SIT
     [echo] partition default compositeName Project1 compositeDir /opt/oracle/SampleCode/code/HelloWorld
     [echo] build sar package
     [echo] oracle.home = /opt/oracle/Middleware/Oracle_SOA1
    [input] skipping input as property compositeDir has already been set.
    [input] skipping input as property compositeName has already been set.
    [input] skipping input as property revision has already been set.
clean:
     [echo] deleting /opt/oracle/SampleCode/code/HelloWorld/Project1/deploy/sca_Project1_rev1.0.jar
init:
    [mkdir] Created dir: /opt/oracle/SampleCode/code/HelloWorld/Project1/deploy
scac-validate:
     [echo] Running scac-validate in /opt/oracle/SampleCode/code/HelloWorld/Project1/composite.xml
     [echo] oracle.home = /opt/oracle/Middleware/Oracle_SOA1
    [input] skipping input as property compositeDir has already been set.
    [input] skipping input as property compositeName has already been set.
    [input] skipping input as property revision has already been set.
scac:
     [scac] Validating composite "/opt/oracle/SampleCode/code/HelloWorld/Project1/composite.xml"
     [scac] info: File to validate does not exist fault-policies.xml
     [scac] info: No test suites available
package:
     [echo] oracle.home = /opt/oracle/Middleware/Oracle_SOA1
    [input] skipping input as property compositeDir has already been set.
    [input] skipping input as property compositeName has already been set.
    [input] skipping input as property revision has already been set.
compile-source:
    [mkdir] Created dir: /opt/oracle/SampleCode/code/HelloWorld/Project1/dist
     [copy] Copying 15 files to /opt/oracle/SampleCode/code/HelloWorld/Project1/dist
     [copy] Warning: /opt/oracle/SampleCode/code/HelloWorld/Project1/src not found.
     [copy] Copying 2 files to /opt/oracle/SampleCode/code/HelloWorld/Project1/dist/SCA-INF/classes
      [jar] Building jar: /opt/oracle/SampleCode/code/HelloWorld/Project1/deploy/sca_Project1_rev1.0.jar
   [delete] Deleting directory /opt/oracle/SampleCode/code/HelloWorld/Project1/dist
     [copy] Copying 1 file to /opt/oracle/SampleCode/builds/${build.number}
     [echo] deploy on http://10.51.80.64:7005 with user weblogic
     [echo] deploy sarFile /opt/oracle/SampleCode/code/HelloWorld/Project1/deploy/sca_Project1_rev1.0.jar
     [echo] oracle.home = /opt/oracle/Middleware/Oracle_SOA1
deploy:
    [input] skipping input as property serverURL has already been set.
    [input] skipping input as property sarLocation has already been set.
    [input] skipping input as property password has already been set.
[deployComposite] setting user/password..., user=weblogic
[deployComposite] Processing sar=/opt/oracle/SampleCode/code/HelloWorld/Project1/deploy/sca_Project1_rev1.0.jar
[deployComposite] Adding sar file - /opt/oracle/SampleCode/code/HelloWorld/Project1/deploy/sca_Project1_rev1.0.jar
[deployComposite] INFO: Creating HTTP connection to host:10.51.80.64, port:7005
[deployComposite] INFO: Received HTTP response from the server, response code=404
[deployComposite] SEVERE: Problem in sending HTTP request to the server. Please make sure the server is up and/or check standard HTTP response code for 404
[deployComposite] ---->response code=404, error:null
     [echo] stop activate Project1
     [echo] oracle.home = /opt/oracle/Middleware/Oracle_SOA1/bin/..
activateComposite:
    [input] skipping input as property host has already been set.
    [input] skipping input as property port has already been set.
    [input] skipping input as property user has already been set.
[secure-input] skipping secure-input as property password has already been set.
    [input] skipping input as property compositeName has already been set.
    [input] skipping input as property revision has already been set.
     [echo] oracle.home = /opt/oracle/Middleware/Oracle_SOA1/bin/..
compositeMgrTask:
     [java] [WARN ][codegc ] Could not acquire large pages for 256Mbytes code (at 0xffffffff60000000).
     [java] [WARN ][codegc ] Falling back to normal page size.
     [java] Connecting to: service:jmx:t3://10.51.80.64:7005/jndi/weblogic.management.mbeanservers.runtime
     [java] java.io.IOException: Unhandled exception in lookup
     [java]     at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:196)
     [java]     at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:84)
     [java]     at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
     [java]     at oracle.fabric.management.deployedcomposites.CompositeManagerHelper.createJMXConnector(CompositeManagerHelper.java:91)
     [java]     at oracle.fabric.management.deployedcomposites.CompositeManager.initConnection(CompositeManager.java:48)
     [java]     at oracle.fabric.management.deployedcomposites.CompositeManagerAntWrapper.execute(CompositeManagerAntWrapper.java:221)
     [java]     at oracle.fabric.management.deployedcomposites.CompositeManagerAntWrapper.main(CompositeManagerAntWrapper.java:275)
     [java] Caused by: javax.naming.NamingException: Unhandled exception in lookup [Root exception is org.omg.CORBA.NO_PERMISSION:   vmcid: 0x0 minor code: 0 completed: No]
     [java]     at weblogic.corba.j2ee.naming.Utils.wrapNamingException(Utils.java:83)
     [java]     at weblogic.corba.j2ee.naming.ContextImpl.lookup(ContextImpl.java:291)
     [java]     at weblogic.corba.j2ee.naming.ContextImpl.lookup(ContextImpl.java:227)
     [java]     at javax.naming.InitialContext.lookup(InitialContext.java:392)
     [java]     at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:179)
     [java]     ... 6 more
     [java] Caused by: org.omg.CORBA.NO_PERMISSION:   vmcid: 0x0 minor code: 0
     [java]     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
     [java]     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeC
     [java]     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Del
     [java]     at java.lang.reflect.Constructor.newInstance(Constructor.java:51
     [java]     at java.lang.Class.newInstance0(Class.java:357)
     [java]     at java.lang.Class.newInstance(Class.java:310)
     [java]     at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.get
     [java]     at com.sun.corba.se.impl.protocol.giopmsgheaders.ReplyMessage_1_
     [java]     at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.getSy
     [java]     at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherIm
     [java]     at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherIm
     [java]     at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.invoke
     [java]     at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:457
     [java]     at weblogic.corba.cos.naming._NamingContextAnyStub.resolve_any(_
     [java]     at weblogic.corba.j2ee.naming.ContextImpl.lookup(ContextImpl.jav
     [java]     ... 9 more
     [echo] unit test Project1
     [echo] finish
     [echo] finished Composite HelloWorld deployment
BUILD SUCCESSFUL
Total time: 1 minute 7 seconds
Note : All the server name and port no are depfined properly.
Regards,
Anilkumar P

Hi,
I was getting exactly same error. I have resolved it by putting the
<target name="enterPassword" >
        <input message="Please enter Weblogic password:" addproperty="passwd">
            <handler classname="org.apache.tools.ant.input.SecureInputHandler" />
        </input>
in my build.xml
It means that it was not able to read password properly in bin/ant-sca-mgmt.xml
Password was the issue in my case. it is working now.
Thanks,
Arun Jadhav

CBS Make failed while importing - Urgent

Hi...
i m following the JDI CookBook to import ESS MSS SCA files.
I have following issues.
1. I have placed all the SCA files, ESS MSS PCUI JBUILT and sap-jee, JTECH in the CMS inbox. but whn i go for check in .. JBUILT AND JTECH are not displayd in the dropdown.
i have successfully checked in sap-jee, ess, mss, pcui sca files and are listed in transport queue
2. i still went ahead with import without JTECH/BUILT files.. Repository import for sap-jee was successful but not the CBS make.
3. this is the error log when i import ess / mss sca files
the repository import itself fails
Info:Starting Step Repository-import at 2005-10-27 18:45:06.0859 +5:00
Info:Component:sap.com/SAP-JEE
Info:Version :NIGHTLYBUILD.20051017041900
Info:4. PR is of type TCSSoftwareComponent
Info:Component:sap.com/SAP_ESS
Info:Version :MAIN_xss04PAT_C.20050908103103
Info:3. PR is of type TCSSoftwareComponent
Fatal Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: PropagationException received: Could not perform Import Request: Status = 500 Internal Server Error:communication error: PropagationException received: Could not perform Import Request: Status = 500 Internal Server Error
com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: PropagationException received: Could not perform Import Request: Status = 500 Internal Server Error
     at com.sap.cms.tcs.client.DTRCommunicator.writeChangelistData(DTRCommunicator.java:228)
     at com.sap.cms.tcs.core.RepositoryImportTask.processRepositoryImport(RepositoryImportTask.java:260)
     at com.sap.cms.tcs.core.RepositoryImportTask.process(RepositoryImportTask.java:500)
     at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
     at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:169)
     at com.sap.cms.tcs.core.TCSManager.importPropagationRequests(TCSManager.java:276)
     at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:212)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.execImport(ImportQueueHandler.java:432)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.startImport(ImportQueueHandler.java:99)
     at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:392)
     at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl0.startImport(LocalCmsTransportProxyLocalObjectImpl0.java:1156)
     at com.sap.cms.ui.wl.Custom1.importQueue(Custom1.java:1114)
     at com.sap.cms.ui.wl.wdp.InternalCustom1.importQueue(InternalCustom1.java:1025)
     at com.sap.cms.ui.wl.Worklist.onActionImportQueue(Worklist.java:840
Please help me on this as i m having this problem since long. i tried to import a couple of times.
any hint also will be rewarded..!!
regards
ashutosh

I don't know if this will be much help, maybe if you could point me to the JDI Cookbook you're using...
Based on the stack trace that you've included, it seems that your client is trying to connect to the DTR and an error is occuring in the operation that the DTR is trying to perform for you.
It's hard for me to assess the full situation without more details, but hopefully that should narrow it down a little bit for you.
-Steve
If you find a post useful, please help keep the community going by setting a good example and rewarding the poster with points.

0 bytes resource

Hi there,
I'm trying to use FileUpload component with no sucess. No matter what I do I always get a 0-byte long resource (all other resource attributes are ok, such as resource name, mime type, and so forth). The resource.read(false) method always return an empty InputStream. Should I do something with the resource before it is populated with real bytes???
Best,
Ricardo

Hi,
I imported the SCA files and deployed the DC and it works fine for me.
            IPrivateUploadFileView.IContextElement element = wdContext.currentContextElement();
          IWDResource resource = element.getFile();
          byte fileData[] = null;
          // if a file in the FileUpload field exists
          if (resource != null) {
               try {
                    int fileLength = 0;
                    InputStream fileIs = resource.read(false);
                    ByteArrayOutputStream bOut = new ByteArrayOutputStream();
                    int length;
                    byte[] part = new byte[10 * 1024];
                    while ((length = fileIs.read(part)) != -1) {
                         bOut.write(part, 0, length);
                    fileIs.close();
                    fileData = bOut.toByteArray();
                    fileLength = fileData.length;
                    bOut.close();
                    wdComponentAPI.getMessageManager().reportSuccess("File Length"+fileLength);
                    if (fileData == null || fileLength == 0) {
                         throw new RuntimeException("File data is null or zero-byte");
               } catch (Exception e) {
                    wdComponentAPI.getMessageManager().reportException(e);
          } else {
               wdComponentAPI.getMessageManager().reportException("File not defined");
         wdThis.wdGetUploadFileComponentController().fireUploadFileCompletedEvent();
wdComponentAPI.getMessageManager().reportSuccess("File Length"+fileLength);
Is printing the size
Note:-1.There is no issue in ur component possible reason might be try uploading different files.
          2.Try reinstalling your NWDS and import the SCA then which could fix this issue.
Thanks & Regards,
Lokesh Kamana.

SCA Performance Issues

Recent datacentre design uses both CSS Content Switches and SCA SSL accelerators. Services working fine, however SSL acceleration actually SLOWS DOWN during the day. Up to four minutes to load a SSL encrypted page in the afternoon as opposed to a morning check.
Cached sesion data is our best guess. Caching is turned on by default on the SCA boxes. Can't find any documentation on turning it off. Would like to try and run boxes with caching turned off, if only to discount as a possible cause of performance probems.
Need urgent help please, as datacentre is going live extremely soon. Any ideas, thoughts etc welcome.
Thanks,
David.

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac)
Since you specified your issue is urgent, you should open a case with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.

Issue with ant-sca-compile.xml

We have installed AIA 11.1.1.3, and using Jdev 11.1.1.3,
We are facing issue while deploying ABCSImpl Composite(AIA Service Constructor Based composites) through Jdev 11.1.1.3 ,
SOA-log showing
Buildfile: C:\Jdev11113\jdeveloper\bin\ant-sca-compile.xml
scac:
[scac] Validating composite "H:\AIASOAProject\AIAPOInterface\CreatePurchaseOrderListEbizProvABCSImpl\composite.xml"
Its not moving forward, Jdeveloper is getting struck during validation step.
Messages-log showing -
Compiling...
Context: MakeProjectAndDependenciesCommand selection=CreatePurchaseOrderListEbizProvABCSImpl.jpr application=AIAPOInterface.jws project=CreatePurchaseOrderListEbizProvABCSImpl.jpr node=CreatePurchaseOrderListEbizProvABCSImpl.jpr
Its happening with AIA Service Constructor based composites.
Non Service Constructor based Composites are getting deployed i.e. Provider Service, EBS and Requestor Services are getting deployed.
Its very urgent kindly provide some suggestions or tips, Its urgent for us.

Hi Manish,
Compilation of Requester and Provider ABCS takes longer time than other AIA components.So check the Xms and Xmx values in ant-sca-compile.xml and check whether it is matching with your OS environment or try setting at a higher value and then try deploying again.
Is it building properly or is getting stuck at build level only?
If its issue with deployment then check $FM_HOME/user_projects/domains/[domain_name]/servers/soa_server1/logs/soa-server1-diagnostic.log.
Rgds,
Mandrita.

Having issues with SP9 and IDMUI5/IDMREST SCA files

Hello,
I've been working through an upgrade to SP9 and have run into two issues related to some SCA files. I'm hoping others might be able to shed some light on how to resolve them. The issues primarily focus on unresolved dependencies for files I'm unable to locate.
*Prior to performing this upgrade I downloaded all relevant SP9 files.
In performing this upgrade, I've followed these steps:
1) update database schema. completed successfully
2) upgrade the runtime components. completed successfully
3) upgrade the management console. completed successfully
4) deploy IDM user interface on NW 7.3. This is where I ran into problems.
Problem #1 - the IDMUI5 SCA file does not pass the validation check.
- it states there is an unresolved dependency.
- sap.com/tc~idm~rest~ear was not found
Problem #2 - the IDMREST SCA file does not pass the validation check.
- it states there are two unresolved dependencies
- sap.com/tc~odata4j~primary was not found
- sap.com/tc~jax~rs~primary was not found
What I'd like to understand is where the files required by IMDUI5 and IDMREST exist and how to complete the upgrade for them.
Thanks, Paul

I think this is the odata4 that you need for 7.3
SCA
ODATACXFEXT11_0-10012140.SCA
SP11 for SAP ODATA4J+CXF-REST LIB 7.30
0
Info
10352
26.02.2014
This might be the only package you need; it might be in your best interest to avoid manually downloading files and rely upon Solution Manager's MOpz feature to query your IdM system and let it track down all the needed packages.

Creation of domain issues - migration from weblogic 10.3.0 to 10.3.5 versio

Hello,
i would like to kindly ask for a help with following issue:
Basically we are migrating from the 10.3.0 to the 10.3.5 version. We are building the domain using the template in "silent mode". And when i try to create the domain with new weblogic 10.3.5 im getting some errors.
The command to run the creation of the domain is following:
${WL_HOME}/common/bin/config.sh -mode=silent -silent_script=${SILENT_SCRIPT} -log=${WLLOGFILE} >> ${LOGFILE} 2>&1
returnCode=$?
SILENT_SCRIPT contains following commands:
read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar";
write domain to "/local/wg372/BM/appl/BmDomain";
set OverwriteDomain "true";
close template;
When i setup new env(solaris) with weblogic 10.3.5 im getting following error when the silent_script command (*write domain to "/local/wg372/BM/appl/BmDomain";*) is executed:
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar"
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - write Domain to "/local/wg372/BM/appl/BmDomain"
2011-07-18 16:53:00,505 ERROR [runScript] com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask - There was an error executing the script: /local/wg372/BM/appl/installer/silent_script
java.lang.NullPointerException
     at com.oracle.cie.domain.security.SecurityGenerateLDIFT.buildSecurityInfo(SecurityGenerateLDIFT.java:460)
     at com.oracle.cie.domain.security.SecurityGenerateLDIFT.<init>(SecurityGenerateLDIFT.java:119)
     at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:718)
     at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.processWrite(ScriptParserClassic.java:573)
     at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.execute(ScriptParserClassic.java:429)
     at com.oracle.cie.domain.script.ScriptParserClassic.parseAndRun(ScriptParserClassic.java:148)
     at com.oracle.cie.domain.script.ScriptParserClassic.doExecute(ScriptParserClassic.java:110)
     at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:72)
     at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:35)
     at com.oracle.cie.wizard.domain.helpers.Executor.runSilentScript(Executor.java:68)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.runScriptWithExecutor(RunScriptTask.java:551)
     at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.execute(RunScriptTask.java:335)
     at com.oracle.cie.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
     at java.lang.Thread.run(Thread.java:662)
In Windows env im getting following error:
create.domain:
[exec] -mode="silent" -silent_script=J:/_dev/build/installer/silent_script
[exec] << read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] >> succeed: read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] << write Domain to "J:/_dev/build/BmDomain"
[exec] CFGFWK-60550: Script execution aborted. The script may contain an error.
[exec] null
CFGFWK-60550: - doc says
CFGFWK-60550: Script execution aborted. The script may contain an error.
Cause:
Action:
Level: 1
Type: ERROR
Impact: Configuration
I tried to google for this issue, look into the weblogic documentation but with no luck.
So i would like to kindly ask, if anyone of you perhaps could give me a hint/advise with this problem.
Thanks in advance.

Hi,
thanks for the reply but im not sure if we are talking about the same thing. What i need is to upgrade the weblogic "DOMAIN" not the weblogic installation itself.
Anyway,
after some googling and testing im again stucked with another issue:
1. First i have created the old doman (10.3.0)
2. Then i have tested the domain with the new weblogic version 10.3.5 - as it should be (and is) compatible within those 2 versions
---> worked fine
3. Then via offline WLST(of weblogic 10.3.5) i have managed to create new template with command writeTemplate(nameOfTemplate.jar)
4. But when i try to create the new domain with the new template via WLST(of weblogic 10.3.5) im again stucked (im able to read the template in wlst but not able to writeDomain ) - error:
wls:/offline> readTemplate('/home/wg372/tmp/new_template.jar')
wls:/offline/BmDomain>writeDomain('/home/wg372/tmp/new_domain')
Error: writeDomain() failed. Do dumpStack() to see details.
wls:/offline/BmDomain>dumpStack()
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:803)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.writeDomain$15(/var/tmp/WLSTOfflineIni6651397525640719781.py:71)
at org.python.pycode._pyx3.call_function(/var/tmp/WLSTOfflineIni6651397525640719781.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx24.f$0(<console>:1)
at org.python.pycode._pyx24.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:757)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:795)
... 29 more
I tried to have a look around for the "The application location must have write permission." problem but again with no luck.
Furthemore when i try to do the same with old domain template, with old version of WLST (of weblogic 10.3.0), i have no problems with creating of the domain.
Any ideas?
Ill keep you updated :-)

CMS SCA imports fail & CBS error while activating

Hello!!!
I am trying to setup the JDI process for scenario 2+ or 3. The JDI is running on the DEV system and SLD is altogether on a different system(Here the installation and configuration of JDI & SLD was carried out by an admin). So I started implementing (assuming that JDI & SLD was configured well) the Scenario 3 tutorial provided in the help.sap.com.
I have the following issues in doing so
1. When I try to import depenedent SCA's in transport studio, the SCA's fail to import. This done once a track has been created in the CMS and after checking in the dependent SC archives.
2. I get this "CBS SERVER ERROR : CBS failed to communicate with some other server (internal code : Communication Error)" when I try to check in the DTR activity. The checked in activity contains a SC with out any dependencies on other SC's.
I shall apprecaite your response very much.
Thanks in advance
Yasu

Maybe SAP is revising the note...?! Anyway here's an older copy of what the note says:
Symptom
Server communication problems after the reconfiguration of the NWDI admin user/password.
Reason and Prerequisites
The new user/password configuration is not updated in all NWDI landscape servers. The automatic update is not implemented.
The use case / Precondition:
In the NWDI CMS Landscape Domain Data UI the admin user and password are defined. In addition at least one NWDI track is already configured.
The NWDI administrator has to change the NWDI admin user/password.
Solution
In order to update the new user/password configuration for all NWDI Servers manual steps are required.
The use case / Precondition:
In the NWDI CMS Landscape Domain Data UI the admin user and password are defined. In addition at least one NWDI track is already configured.
The NWDI administrator has to change the NWDI admin user/password.
The required steps:
Change the NWDI admin user/password configuration in UME.
Change the NWDI admin user/password configuration in the NWDI CMS Landscape Domain Data UI.
Update User/Password Configuration in the configured CBS Buildspaces
in Visual Admin settings, Server -> Services -> Component Build Service -> set idle start of Component Build Service to true and restart CBS.
for each track, in CMS UI -> Landscape Configurator -> Track Data , make a change in the XML Content of one software component of track, add the line "" in the XML Content.
save each track with the above change.
in Visual Admin settings, Server -> Services -> Component Build Service -> set idle start of Component Build Service to false and restart CBS.
in CMS UI -> Transport Studio, restore system state of all tracks.
Update User/Password Configuration of name server in the configured DTR Servers
Check the name server configuration of your DTR server as described in the following SAP Help documentation (see section "Configuration of the Name Service"): http://help.sap.com/saphelp_nw04/helpdata/en/b9/b4de3f68d48f15e10000000a155106/content.htm
If the user/password in the name server configuration is not updated with the new NWDI admin user/password configuration you have to set the new user/password manually.

Error while importing .SCA files in track

Hi Folks,
I tried importing following .SCA files into a nwdi track but it Finished with Errors.
ENGFACADE
ENGINEAPI
FRAMEWORK
WD-RUNTIME
By logs i got information that
'File is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
Note: I am trying to setup nwdi track for CE developments and following this [Document|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7014086d-3fd9-2910-80bd-be3417810c6f?quicklink=index&overridelayout=true]
Following .SCA files are imported successfully
SAPBUILDT
SAPJEE
SAPJTECHS
Please help me to resolve this issue.
Thanks in anticipation.
Mandeep Virk

Hi John,
Following are the log details
20100309050525 Info   :Starting Step CBS-make at 2010-03-09 05:05:25.0359 -6:00
20100309050526 Info   :wait until CBS queue of buildspace D01_Demo_D is completely processed, before starting the import
20100309050526 Info   :CBS queue of buildspace D01_Demo_D is completely processed. Starting the import now.
20100309050611 Info   :deploy archive /usr/sap/JTrans/CMS/extract/201003091105190928_sap.comENGFACADESAP AG~20080202122500/DEPLOYARCHIVES/base.tools.facade.sda is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
20100309050611 Info   :deploy archive /usr/sap/JTrans/CMS/extract/201003091105190928_sap.comENGFACADESAP AG~20080202122500/DEPLOYARCHIVES/com.sap.base.technology.facade.sda is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
20100309050611 Info   :deploy archive /usr/sap/JTrans/CMS/extract/201003091105190928_sap.comENGFACADESAP AG~20080202122500/DEPLOYARCHIVES/deploy.facade.sda is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
20100309050611 Info   :deploy archive /usr/sap/JTrans/CMS/extract/201003091105190928_sap.comENGFACADESAP AG~20080202122500/DEPLOYARCHIVES/engine.j2ee14.facade.sda is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
20100309050611 Info   :deploy archive /usr/sap/JTrans/CMS/extract/201003091105190928_sap.comENGFACADESAP AG~20080202122500/DEPLOYARCHIVES/engine.lm.facade.sda is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
20100309050611 Info   :deploy archive /usr/sap/JTrans/CMS/extract/201003091105190928_sap.comENGFACADESAP AG~20080202122500/DEPLOYARCHIVES/engine.migration.facade.sda is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
20100309050611 Info   :deploy archive /usr/sap/JTrans/CMS/extract/201003091105190928_sap.comENGFACADESAP AG20080202122500/DEPLOYARCHIVES/tcbljcoapi.sda is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
20100309050611 Info   :deploy archive /usr/sap/JTrans/CMS/extract/201003091105190928_sap.comENGFACADESAP AG20080202122500/DEPLOYARCHIVES/tcblvsiapi.sda is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
20100309050611 Info   :deploy archive /usr/sap/JTrans/CMS/extract/201003091105190928_sap.comENGFACADESAP AG20080202122500/DEPLOYARCHIVES/tcjeappconfigurationapi.sda is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
20100309050611 Info   :deploy archive /usr/sap/JTrans/CMS/extract/201003091105190928_sap.comENGFACADESAP AG20080202122500/DEPLOYARCHIVES/tcjecrossapi.sda is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
20100309050611 Info   :deploy archive /usr/sap/JTrans/CMS/extract/201003091105190928_sap.comENGFACADESAP AG20080202122500/DEPLOYARCHIVES/tcjewebcontainerpublic~api.sda is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
20100309050611 Info   :deploy archive /usr/sap/JTrans/CMS/extract/201003091105190928_sap.comENGFACADESAP AG20080202122500/DEPLOYARCHIVES/tcjewebservicesapi.sda is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
20100309050611 Info   :deploy archive /usr/sap/JTrans/CMS/extract/201003091105190928_sap.comENGFACADESAP AG20080202122500/DEPLOYARCHIVES/tcjewebserviceslib.sda is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
20100309050611 Info   :deploy archive /usr/sap/JTrans/CMS/extract/201003091105190928_sap.comENGFACADESAP AG~20080202122500/DEPLOYARCHIVES/webservices.lib.facade.sda is not added to build request, because associated SC is marked with the 'non nwdi deployment flag'
20100309050611 Info   :=================================================================
20100309050611 Info   :buildspace = D01_Demo_D   build request id = 23
20100309050611 Info   :wait until CBS queue of buildspace D01_Demo_D is completely processed, before asking for build results
20100309050611 Info   :waiting for CBS queue activity
20100309050641 Info   :build process already running: waiting for another period of 30000 ms
20100309050641 Info   :CBS queue of buildspace D01_Demo_D is completely processed. Asking for build results now.
20100309050641 Fatal :processing of build request is not finished successfully, final status is:FAILED (more details in CBS log )
20100309050641 Info   :no confirmation of request 23 because the status is not 'succeeded'
20100309050641 Info   :=================================================================
20100309050641 Info   :Remove software component ENGFACADE from further processing, because archive import failed
20100309050641 Info   :Step CBS-make ended with result 'error' at 2010-03-09 05:06:41.0702 -6:00
- Mandeep Virk

Error while adding .sca files in DI Track

Hi,
I have 4 different tracks in DI for:
1. ESS
2. MSS
3. A
4. B
The software component in A and B is same.
Now i have to add CAF related SCA files in Track A.
I add those as dependencies. After adding, i also synchronize the dependencies.
When i click on save, it doesnt display popup for save. Instead, a popup is displayed regarding "Where-Used Check" stating" Following runtime systems already used elsewhere in CMS domain" and below this displays the list of the remaining 3 tracks. It has 2 buttons: continue and cancel. If i continue on cancel, it gives the error:
Unexpected error; inform your system administrator: User not authorized. (Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://<hostname>:50100/CBSWebService/CBSHttpSOAP?style=rpc")
I am not able to figure out the reason for this.
Thanks & regards,
Anupreet

Hi,
Please check out these links on the same issue -
Re: HTTP/1.0 401 Unauthorized
Re: MSS PCR Error
http://help.sap.com/saphelp_nw04/Helpdata/EN/ab/08194116bfb167e10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0d9a978-5f59-2a10-1cae-d4cf0c92a0f2
Hope the above links would solve the issue.
Regards
Lekha

Error importing *.SCA file into NWDS: Import (into source SC) not possible

All,
When attempting to import an SCA into a new project in NWDS, an "Import (into source SC) not possible: SCA doesn't contain DC sources" occurs. Any assistance to fix this issue appreciated.
Thanks,
Lee

You can indeed import SCAs into local development configurations in NWDS (Eclipse). You have to have a pre-existing software component of the same name and vendor which may or may not be empty.
In the Development Infrastructure perspective in NWDS 7.1, just right-click on the software component you want to overwrite with the import and choose "Import".
To import SCAs into a CMS track in the NWDI, you have to go to http://<NWDI server>:5<nn instance no>00/devinf/ and import the SCAs from the transport inbox directory of the NWDI server. Don't forget to maintain the SLD if necessary.
Cheers,
Thorsten

Application Deployment issue in Webdynpro project

Hi,
I have created an sample Webdynpro project which just displays the name. EAR file has been transformed to SCA file using NWPACKTOOL for deploying the application in JSPM.
When i tried to deploy the SCA file i am getting an exception as,
Deployment Items -
     1. Client path 'C:\usr\sap\WP1\SYS\EPS\in\test1.sca'
          Deploy status is 'Aborted'
          Description:'1. Item is skipped because of failed deployment of item 'test.com_test' and because the applied error strategy is OnErrorStop
          2. Contains Aborted deployment component:
test.com_test'.
          SCA : name 'test', vendor 'test.com', location 'local', version '1000.1.0.1.0.20110810105342'
          Contained DCs:
               1.1 : Relative path 'C:\usr\sap\WP1\SYS\EPS\in\test1.sca --> test.sca.ear'
                    Deploy status is 'Aborted'
                    Description:'1. ASJ.dpl_ds.006193 Error while deploying ear file C:\usr\sap\WP1\J00\j2ee\cluster\server0\.\temp\tcbldeploy_controller\archives\56\test1_sca1312954437078\DEPLOYARCHIVES\test.sca.ear; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception while [validating application test.com/test.
     The test.com/test application was processed from [developmentserver] containers, but none of them returned information about deployed components.
     The registered containers in this moment were [BRMS_Content_Archive, z_com.sap.security.policy-configurations, utl_handler, developmentserver, Monitoring Configurator, component.info_handler, servlet_jsp, connector, classification_handler, CTCContainer, JDBCConnector, PortalRuntimeContainer, dbcontentcontainer, scheduler~container, Content Container, src.zip_handler, PCD Content Deployment Handler, ConfigurationsContainer, orpersistence, appclient, JMSConnector, Cluster File System, Cache Configuration Upload, com.sap.security.ume, SCA Composites Container, metamodelrepository, textcontainer, eden_handler, Galaxy_Content_Archive, uddi_handler, MigrationContainer, com.sap.security.login-modules, webservices_container, EJBContainer, dbschemacontainer, MDRContainer, com.sap.security.policy-configurations, app_libraries_container].
     Possible reasons :
     1.Empty or incorrect application, which is not recognized by registered containers.
     2.An AS Java service, which is providing a container, is stopped or not deployed.
     3.The containers, which processed it, are not implemented correctly, because the application was deployed or started initially, but containers didn't return information about deployed components in the application deployment info].'.
                    SDA : name 'test', vendor 'test.com', location 'local', version '2', software type ('J2EE', s
Can some one help me in deploying the SCA file?
Please let me know how to resolve this issue.
Thanks in Advance!!
Regards
MG
Edited by: madhanssmile on Aug 10, 2011 2:34 PM

go to "DC Metadata" "used DC" , and "Properties" in context menu
for all you your components.
problematic component reference probable has check box "deploy time" checked.
remove that reference.
usually only "Build time" check box must be checked. try to do so.

Receive java.lang.NullPointerException (JCA-12563) on SCA with Stored Procedure dbAdapter (SOA Suite 12.1.3)

Hi,
I'm new to the Oracle SOA Suite and have been creating very simple SCA WebServices (async and sync) prototypes to INSERT, UPDATE and Poll Oracle 9i and 11g databases. So far, everything works and passes the tests from EM.
I cannot get the Stored Procedure WebService to test successfully as I receive the error message below regardless of JNDI configuration for XA, non-XA, Last Logging Resource, Support Global Transactions,PlatformClassName, etc... The Outbound Connection Pool is setup correctly as the other DML tests have worked fine.
BINDING.JCA-12563
Exception occurred when binding was invoked.
Exception occurred during invocation of JCA binding: "JCA Binding execute of Reference operation 'dbReference' failed due to: Interaction processing error.
Error while processing the execution of the IFSAPP.TEST_SOA_API API interaction.
An error occurred while processing the interaction for invoking the IFSAPP.TEST_SOA_API API. Cause: java.lang.NullPointerException
Check to ensure that the XML containing parameter data matches the parameter definitions in the XSD. This exception is considered not retriable, likely due to a modelling mistake.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
Caused by: BINDING.JCA-12563
Exception occurred when binding was invoked.
Exception occurred during invocation of JCA binding: "JCA Binding execute of Reference operation 'callAPI' failed due to: Interaction processing error.
Error while processing the execution of the IFSAPP.TEST_SOA_API API interaction.
An error occurred while processing the interaction for invoking the IFSAPP.TEST_SOA_API API. Cause: java.lang.NullPointerException
Check to ensure that the XML containing parameter data matches the parameter definitions in the XSD. This exception is considered not retriable, likely due to a modelling mistake.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
   at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.executeJcaInteraction(JCAInteractionInvoker.java:569)
    at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.invokeJcaReference(JCAInteractionInvoker.java:724)
    at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.invokeAsyncJcaReference(JCAInteractionInvoker.java:689)
    at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAEndpointInteraction.performAsynchronousInteraction(JCAEndpointInteraction.java:628)
    at oracle.integration.platform.blocks.adapter.AdapterReference.post(AdapterReference.java:325)
    ... 84 more
Caused by: BINDING.JCA-11812
Interaction processing error.
Error while processing the execution of the IFSAPP.TEST_SOA_API API interaction.
An error occurred while processing the interaction for invoking the IFSAPP.TEST_SOA_API API. Cause: java.lang.NullPointerException
Check to ensure that the XML containing parameter data matches the parameter definitions in the XSD. This exception is considered not retriable, likely due to a modelling mistake.
    at oracle.tip.adapter.db.exceptions.DBResourceException.createNonRetriableException(DBResourceException.java:690)
    at oracle.tip.adapter.db.exceptions.DBResourceException.createEISException(DBResourceException.java:656)
    at oracle.tip.adapter.db.sp.SPUtil.createResourceException(SPUtil.java:180)
    at oracle.tip.adapter.db.sp.SPInteraction.executeStoredProcedure(SPInteraction.java:183)
    at oracle.tip.adapter.db.DBInteraction.executeStoredProcedure(DBInteraction.java:1302)
    at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:307)
    at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.executeJcaInteraction(JCAInteractionInvoker.java:415)
Caused by: java.lang.NullPointerException
    at oracle.tip.adapter.db.sp.SPInteraction.executeStoredProcedure(SPInteraction.java:162)
    ... 91 more
The SP SCA is the simplest possible application I can think of... The WebService accepts a single INT, calls BPEL>Receive>Assign>Invoke>dbAdapter(Stored Procedure) that accepts a single IN INTEGER parameter in an Oracle 11g database.
Steps I've used to create the SP SCA. (Create Empty SOA Application)
1.) Create Database Adapter in External References swim lane.
2.) Set JNDI and Connection.
3.) Browse to Oracle Procedure...click through Wizard and accept all defaults.
   CREATE OR REPLACE PROCEDURE TEST_SOA_API (
     wo_order_no_ IN INTEGER)
   IS
   BEGIN
     INSERT INTO TEST_TMP VALUES (wo_order_no_);
   END;
4.) WSDL, XSD, JCA are automatically generated.
5.) Create BPEL Process Component and select Template "Base on a WSDL". I choose the WSDL created from the Database Adapter wizard.
6.) The "Exposed Service" is automatically created and everything is wired.
7.) I deploy to my CompactDomain (running on a local Oracle12 db). No errors.
8.) I login to EM and Test the WebService..and ALWAYS receive the error message above.
I've tried BPEL Process and Mediator as components to simply pass the single incoming INT parameter to the SP DbAdapter and tried every combination I can think of with DataSource/DbAdapter Deployment through the Admin console. I used the same exact steps above for INSERT, UPDATE, Polling and have had no issues so I cannot figure out why I'm not receiving java.NullPointer exception or why I'm receiving the XML/XSD malformation error.
Stuck now...anyone have an idea what I'm doing wrong or simply tell me I'm an idiot and shouldn't do SP's this way?
FYI. I've turned on logging for the oracle.soa.adapter.db class to TRACE: 32(FINEST). Not much help to me
[2015-04-02T09:03:55.706-05:00] [AdminServer] [WARNING] [ADF_FACES-00007] [oracle.adf.view.rich.render.RichRenderer] [tid: 118] [userId: weblogic] [ecid: 852497f1-b648-4cac-9cee-05e7972ce68e-00000788,0] [APP: em] [DSID: 0000KluHqzk0NuGayxyWMG1L7K52000003] Attempt to synchronized unknown key: viewportSize.
[2015-04-02T09:05:23.971-05:00] [AdminServer] [TRACE] [] [oracle.soa.adapter.db.outbound] [tid: 115] [userId: <anonymous>] [ecid: 852497f1-b648-4cac-9cee-05e7972ce68e-000007db,1:17474] [APP: soa-infra] [oracle.soa.tracking.FlowId: 250004] [oracle.soa.tracking.InstanceId: 1270014] [oracle.soa.tracking.SCAEntityId: 90004] [composite_name: OraclePLSQL2!1.0] [FlowId: 0000KluSpyP0NuGayxyWMG1L7K52000007] [SRC_CLASS: oracle.tip.adapter.db.sp.AbstractStoredProcedure] [SRC_METHOD: execute] [composite_version: 1.0] [reference_name: dbReference] BEGIN IFSAPP.TEST_SOA_API(WO_ORDER_NO_=>?); END;
[2015-04-02T09:05:23.972-05:00] [AdminServer] [TRACE] [] [oracle.soa.adapter.db.outbound] [tid: 115] [userId: <anonymous>] [ecid: 852497f1-b648-4cac-9cee-05e7972ce68e-000007db,1:17474] [APP: soa-infra] [oracle.soa.tracking.FlowId: 250004] [oracle.soa.tracking.InstanceId: 1270014] [oracle.soa.tracking.SCAEntityId: 90004] [composite_name: OraclePLSQL2!1.0] [FlowId: 0000KluSpyP0NuGayxyWMG1L7K52000007] [SRC_CLASS: oracle.tip.adapter.db.sp.AbstractStoredProcedure] [SRC_METHOD: execute] [composite_version: 1.0] [reference_name: dbReference] Bindings [WO_ORDER_NO_=>INTEGER(2343)]
WSDL
<wsdl:definitions
     name="dbReference"
     targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/OraclePLSQL2/OraclePLSQL2/dbReference"
     xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/db/OraclePLSQL2/OraclePLSQL2/dbReference"
     xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
     xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
     xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/sp/dbReference"
     xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    >
<plt:partnerLinkType name="dbReference_plt" >
    <plt:role name="dbReference_role" >
      <plt:portType name="tns:dbReference_ptt" />
    </plt:role>
</plt:partnerLinkType>
    <wsdl:types>
     <schema xmlns="http://www.w3.org/2001/XMLSchema">
       <import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/sp/dbReference"
               schemaLocation="../Schemas/dbReference_sp.xsd" />
     </schema>
    </wsdl:types>
    <wsdl:message name="args_in_msg">
        <wsdl:part name="InputParameters" element="db:InputParameters"/>
    </wsdl:message>
    <wsdl:portType name="dbReference_ptt">
        <wsdl:operation name="dbReference">
            <wsdl:input message="tns:args_in_msg"/>
        </wsdl:operation>
    </wsdl:portType>
</wsdl:definitions>
XSD
<schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/sp/dbReference" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/sp/dbReference" elementFormDefault="qualified">
   <element name="InputParameters">
      <complexType>
         <sequence>
            <element name="WO_ORDER_NO_" type="int" db:index="1" db:type="INTEGER" minOccurs="0" nillable="true"/>
         </sequence>
      </complexType>
   </element>
</schema>
Payload XML
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
        <soap:Body>
                <ns1:InputParameters xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/db/sp/dbReference">
                        <ns1:WO_ORDER_NO_>667</ns1:WO_ORDER_NO_>
        </ns1:InputParameters>
    </soap:Body>
</soap:Envelope>

An even simpler request:
Can someone create an SCA that simply accepts a single INT parameter and calls a Stored Procedure (Oracle) that inserts this INT into a table? Maybe upload the project folder structure in a zip?
Seems someone with experience on this platform could execute this task in 10-15 minutes.
CREATE TABLE TEST_TMP (WO_ORDER_NO INT);
   CREATE OR REPLACE PROCEDURE TEST_SOA_API (
     wo_order_no_ IN INTEGER)
   IS
   BEGIN
     INSERT INTO TEST_TMP VALUES (wo_order_no_);
   END;

Problem while generating an entry for a keystore on SCA-6000

Hi everybody,
this is my first message.....
i need to develop a sw to adding entry on a keystore that is on a SCA-6000
when i try to add an entry witn method KeyStore.setKeyEntry i have this error:
java.security.KeyStoreException: sun.security.pkcs11.wrapper.PKCS11Exception: CKR_TEMPLATE_INCONSISTENT
at sun.security.pkcs11.P11KeyStore.engineSetEntry(P11KeyStore.java:1067)
at sun.security.pkcs11.P11KeyStore.engineSetKeyEntry(P11KeyStore.java:443)
at java.security.KeyStore.setKeyEntry(KeyStore.java:848)
at TestProvider.main(TestProvider.java:160)
Caused by: sun.security.pkcs11.wrapper.PKCS11Exception: CKR_TEMPLATE_INCONSISTENT
at sun.security.pkcs11.wrapper.PKCS11.C_CopyObject(Native Method)
at sun.security.pkcs11.P11KeyStore.updateP11Pkey(P11KeyStore.java:1518)
at sun.security.pkcs11.P11KeyStore.storePkey(P11KeyStore.java:1678)
at sun.security.pkcs11.P11KeyStore.engineSetEntry(P11KeyStore.java:1063)
i don't find anything on documentation.....
this is my code:
Provider pkcs11Provider = new sun.security.pkcs11.SunPKCS11(fis);
Security.addProvider(pkcs11Provider);
char [] pin = args[1].toCharArray();
KeyStore smartCardKeyStore;
smartCardKeyStore = KeyStore.getInstance("PKCS11");
smartCardKeyStore.load(null, pin); //ALL OK
KeyPairGenerator kpg = KeyPairGenerator.getInstance("RSA", pkcs11Provider);
kpg.initialize(1024);
KeyPair kp = kpg.generateKeyPair();
Certificate[] cc = {cer};
smartCardKeyStore.setKeyEntry("[email protected]", kp.getPrivate(), "dlozzi".toCharArray(), cc);PS fis is an FileInputStream that is the file for configuring SunPKCS11 and this is
name = SunCryptoAccelerator6000
library = /usr/lib/libpkcs11.so
thanks for your help
Ad Maiora,
Daniele Lozzi

"IN UPDATE TASK" resolved by myself. The one should explicitly call 'COMMIT WORK' from Z-program after CALL FUNCTION '...' IN UPDATE TASK in order to get changes in the CDHDR/CDPOS commited. The key in this issue for me was to check the documentation of CALL FUNCTION :-).
Regards,
Ivo

SCA BB Versio 3.6.5 issue

Similar Messages

Maybe you are looking for