Scanning PDF to computer after installing windows 10 not working

Equipment: Pavilion 23 and HP Officejet 6600 (all in one) After installing Windows 10 the printer/scanner can not send (scan to computer) a PDF.  The HP 6600 screen DOES show the computer under the "Scan to" list then once pressed it briefly says "accessing computer" with the HP logo and a spinning thing around it, then the next screen shows a list of options for document format (PDF is the first one and the one I regularly used before Windows 10).  Choosing "Save as PDF" brings up a "Confirm Start Scan" screen, pressing "Start Scan" brings up "Prepairing to scan" with the HP logo and spinning thingy again then the next screen, "Scan Unsuccessful" and below that "The scan could not be completed due to one or more of the following issues - Connection to the computer is lost - The scan application on the computer is currently in use - OCR application is not installed on the computer - See the computer monitor for details"  no details are on the monitor? I have tried the solutions listed here like S**/scannow (DOS ADMIN level,  100% ok) ,  also the "dependent settings" I know this is a Windows 10 issue because it (the HP 6600) has worked flawlessly until this "Upgrade".  Yes, I uninstalled the driver, yes I downloaded HP docotor, I have tried everyting on this forum and then some (i think?)please helpthank you for your wisdom OH great one(s) Other than this A huge thumbs up to Windows 10!!!! Nice work guys/gals over at Microsoft!! 

Hi , Welcome to the HP Forums! I noticed that you cannot scan with your HP Officejet 6600 after upgrading to Windows 10. I am happy to help!  To verify the printer's hardware is working properly, are you able to make copies from the scanner glass? Copying a Multipage Original in Order (Collating). In the meantime, please try the steps in this guide, A 'No Computer Detected' or 'Connection Error' Message Displays When Scanning for HP Officejet 6600 e-All-in-One and 6700 Premium e-All-in-One Printer Series (H711), and follow the steps for Windows 8, as they will work on Windows 10.  Hope this guide helps, and hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

Similar Messages

  • Adobe X - Chinese font missing. After install still does not work

    In adobe X when opening some pdf documents, adobe is asking for a chinese font. I have downloaded the font from the link in the message, but afterwards the same error message still appear - also after restart of the whole PC. Running windows XP
    Is there somehow that I can check if this has been installed correctly or somewhere there are further logs ?

    Hi rossoneris,
    Please check the 'Fonts' folder if you have installed Chinese fonts or not.
    What error do you get when you try to open the pdf's?

  • After install iTunes11, 3Gs not work like hotspot. via BT only ^(

    with 3Gs as hotspot and iTunes 10.6.3, was downloaded and installed iTunes 11.
    after, MBP not see 3Gs as modem
    via BT only I can connect...
    how I back service - hotspot via cable?
    same iPhone and cable work correctly in W7
    Thanks

    It turns out that this is actually a problem with Kronos Workforce Central.  We had the "site.java.plugin.CLSID.familyVersion" setting in that application set to "clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA", which is the Java CLSID for Java 6.  After updating this value to "clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" (the Java universal CLSID), this problem did not occur upon the automatic upgrade of Java.
    We have both Java 6 and Java 7 in our environment, and did during our Kronos implementation, so I don't know why we were using the Java 6 CLSID in the first place.
    Case closed!

  • How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

    How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

    Reinstalling Mavericks depends on several factors:
    if you erased your recovery partition
    what OS originally came on your Mac.
    I'll assume you don't have a backup available that you made before your mishap,  because you didn't mention it.
    That's really the take home message here: have a backup!
    If you still have your recovery partition:
    boot into the recovery partition (command R at restart)
    use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
    if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
    If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
    If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
             (the reference refers to ML but it applies just as well to Mavericks).

  • Dvd/cd player won't work after installing windows 8.1

    I recently installed windows 8.1 on my Pavilion All in One Desktop Computer and now the computer won't recognise the DVD/CD player. I have downloaded all current drivers, but still not working. Any ideas?

    Hello Gindel95,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how the DVD/CD player will not work after installing Windows 8.1, and I would be happy to assist you! To begin, I will need to ask you a few questions:
    What is the Product and Model Number of your desktop computer?
    What version of Windows did you have installed on your computer before upgrading to 8.1?
    Has your computer completed all of its important Windows Updates?
    In the meantime, I recommend following this document on Download or Update Software and Drivers for HP Computers, which should help configure your DVD / CD drive.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Premiere Pro won't work after installing windows 8.1

    Hi,
    I have recently installed Windows 8.1 on my laptop. After the installation was completed I got an error message when I tried to open Premiere Pro CC. The error message says the program can't start because MSVCP110.dll is missing and that I should reinstall. I don't want to reinstall as I'm worried about losing work. Any help would be much appreciated.

    Hi,
    Firstly I must apologize for not replying to this earlier. I have done as suggested restarting my computer after installing but I still get the same error message.... I know I've left this response very late but any help would be much appreciated.

  • NO SOUND AFTER INSTALLING WINDOWS 8.1

    Hi, I'm hoping someone will be able to help.  My sister has a compaq 58 laptop and after installing windows 8.1, now has no sound.  The sound was there when 8.1 was installed but after logging off and logging back on again, the sound disappeared.  We reinstalled windows 8.1 and same thing happened.  We have run scans and got sound again but once again logging off and logging back on again, the sound disappeared, very frustrating.
    The product code is DOX18ea#abu and serial number [edited Serial Number by Moderator]
    help would be much appreciated.

    Devina,  This seems to be a common problem with Windows 8.1. It does not save a working state when logging off. I was afraid to touch my pc when the AUDIO was in a working state. However Microsoft logged me off with no fear and did not save the working state. What a great "glutware" corp. Having said that when the AUDIO is working it appears to work great! Sure wish HP/MICROSOFT could get their act together. Can you say "BASE BAND" , "DSP", "FIR" ETC. Well they think they know the fancy stuff. Now if they could just get it to function for normal people. Can you say "KISS".
    ham123 ps: just send it back!! for total care!!!

  • Problem after installing windows 8.1-THREAD_STUCK_IN_DEVICE_DRIVER

    After installing Windows 8.1 in my Dell inspiron 15r SE, i have been noticing that before starting up every time it shows "an error occurred THREAD_STUCK_IN_DEVICE_DRIVER check online for updates....... 

     We do need the actual log files (called a DMP files) as they contain the only record of the sequence of events leading up to the crash, what drivers
    were loaded, and what was responsible.  
    Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
    If you have any questions about the procedure please ask
    If you are using Blue screen view, who crashed, or a similar application, don't.  They are wrong at least as often as they are correct
    Wanikiya and Dyami--Team Zigzag

  • Non working printer after installing Windows 8.1

    Please HELP my printer no longer works since I installed Windows 8.1  HELP

    Hi @Diane53,
    Welcome to the HP Forums!
    I understand that your printer does not work after installing Windows 8.1, and I am happy to help!
    For further assistance, I will need to know some additional information:
    The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
    If the printer is able to make copies.
    If the printer is connected, Wireless, Ethernet, or USB.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. 
    Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.  
    In the meantime, please try the HP Print and Scan Doctor, and let me know what happens!
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • After installing Windows 8, I am unable to download the creative cloud and the program I purchased for school.

    After installing Windows 8, I am unable to download the creative cloud and the program I purchased for school.

    I purchased photoshop for my computer.  I updated my computer's operating system.  I logged into adobe.  I am unable to download the program again unless I pay again or use the trial.

  • Help me please Con't use Mac after install windows 8.1

    Help me please !!! 
    Can't use Mac OS X Yosemite  after install windows 8.1
    How to use. help me please
    1.Not show this step
    2.But go windows 8.1  first
    3.in my computer have only Drive:BOOTCAMP(C:)

    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the OS X disk icon from which you want to boot.
      5. Click on the arrow button below the icon.

  • Pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate

    pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate
    after installing windows 7 my computer only displays the LAN on my quicklaunch bar and I can even search for open WLAN networks =(

    Hi:
    You probably need to install the wireless card driver.

  • How do you reinstall HP Remote Solution Applicatio​n after installing Windows 8

    Well, I goofed!  I inadvertently uninstalled the HP Remote Solution Application after I had installed Windows 8.  I now want to reinstall it but the application first checks for the presence of Windows 7 and therefore, the installation stops.  Does anyone know how to get around this?  I used 7-ZIP to break the program into pieces, (sp44385), and there are two executables: Install.exe and hpprobar.exe.  The install.exe gets you to the dialog box that finally says, "Yes or No" to install it but it then fails because of Windows 8 being installed.  If you executre hpprobar.exe by it self, you get the dialog box with the scrolling bars but nothing ever happens.  There are also two DLL files; wbdib44i.dll and cpc_dmird.dll.
    Anyone have any ideas?
    Chuck

    Hello ChuckC1812
    If the problem is occurring intermediately, then another program may be interfering with the software. Try disabling the Startup programs and see if the remote works after that. For instructions on managing Startup items follow the OPTION ONE section of the following thread: How to Manage Startup Items in Windows 8.
    The other thing I would like to mention is the software package you downloaded is meant for a different TouchSmart computer, as such it may not work correctly with your Remote and you may have "iffy" reliability at best.
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • MANY issues after installing Windows XP Home Edition with Boot Camp

    I have been having a lot of problems after installing Windows XP Home Edition (2002).
    For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: "This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?" When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
    How do I fix this problem?
    Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
    A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
    D: Some of these problems may not be specifically "Application" related, but the top one mainly is. (in my views)
    ~Twilight

    Twilight:
    Is it possible that you installed Windows XPSP1 instead of the required SP2? If yes then that is cause of all of your issues listed in your post. You have no sound and you cannot connect wirelessly because you still have been unable to install the boot camp drivers when you inserted the leopard disk.
    Please double check to see which version of windows XP did you install. Remember, you need windows XPSP2 for all this to work.
    Now, in the event that you installed XPSP1 then you will need to get to the microsoft windows site on a different computer and burn the Service Pack 2 for windows XP on a CD. After that boot your apple mac to XP side and insert the Service Pack 2 disk and install the pack. After that, it will ask you to restart the computer which you must and then once fully booted into XP then insert the leopard CD again and see if takes and installs all the necessary drivers.
    Axel F.

  • After installing windows 7, will not connect to my router

    I installed windows 7, 64-bit on my macbook late 2009 model. After installing, it would not connect to my router. However, it did connect under Mac OS X and it also worked with my roommates laptops, but not my macbook running windows 7. I searched everywhere and could not find a solution. Tried updating drivers (updated to bootcamp for windows 64 bit, 3.1 and then 3.2). Tried setting it up manually. Also, did not work. Does anyone have any solutions for this? It seems a lot of people are also having this issue.

    For wired or wireless if you have not already done it,
    1) Remove router cable from Modem,
    2) Unplug Router power,
    3) Unplug Modem power,
    4) Wait a few minutes
    5) Replug Router power,
    6) Replug router cable to Modem
    7) Replug Modem power
    Also router may in combo with more modern (if wireless?) PC have security (password setup) requirement.
    I.E. http://support.dlink.com/emulators/wbr2310/wireless.htm
    and a CD that came with it for setup on your computer.

Maybe you are looking for