SCC4 and Object Changeability question

Gurus,
Note - Please do not send me links ,which has no reference to my questions whtsoever,pls provide me direct answers to the questions if possible.
1)do you need to open the system using SCC4 in order to make the "object changeability" option work??
2)what is the relation between SCC4 and "object changeability"
3)Can the Infopackage transported from dev to prod be changed with "object changeability" option??if yes how ?
or only object created in the production local be changed using "object changeability" option
or i can only change the transported Infopack in production using SCC4 ,system open
thanks in advance.

1)do you need to open the system using SCC4 in order to make the "object changeability" option work??
ans) Pre-requisite -Close the system
2)what is the relation between SCC4 and "object changeability"
ans) Objects of the selected object types exist in your system as changeable with "object changeability option" even if this system is globally set to not changeable.
3)Can the Infopackage transported from dev to prod be changed with "object changeability" option??if yes how ?
or only object created in the production local be changed using "object changeability" option
or i can only change the transported Infopack in production using SCC4 ,system open
ans)"Choose Original Changeable" If you not only want to make objects which are generated in this system changeable, but also those that were imported. This option is required, for example, if you need to make repairs or want to change flexible starting times. Note: New imports can overwrite the changes again
I would advocate to read this link carefully -
http://help.sap.com/saphelp_nw04s/helpdata/en/0e/a7343e8c7f6329e10000000a114084/frameset.htm
Hope it Helps
Chetan
@CP..

Similar Messages

Docs about RowSet, and Object RowSet questions?

Docs about RowSet, and Object RowSet questions?
I can find RowSet forum, so I ask here!
Can you give me URLs where I can find more about RowSet and URLs for any RowSet implementation?
Does Borlans, Oracle, IBM, etc., have RowSet implementation?
I find out about Sun's RowSet implementation, but I can't find Object Rowset in this implementation?
Is it possible to develop Object RowSet and is it useful?
I know about O/R tools like Hibernate, but Object RowSet can be useful?
Run SQL query and get Objects, or maybe even run Object query (like EJB or Hibernate or JDO have) and get Objects.
No XML mapping mess and simmilar, like with EJB or Hibernate or JDO?

You can try
http://java.sun.com/developer/Books/JDBCTutorial/chapter5.html
This is a tutorail for RowSet

System and Object privileges question

hello everyone.
I was really making it a priority to really understand both system and object privileges for users. I have setup a couple of 'sandboxes' at home and have done lots of testing. So far, it has gone very well in helping me understand all the security involved with Oralce (which, IMHO, is flat out awesome!).
Anyway, a couple of quick questions.
As a normal user, what view can I use to see what permissions I have in general? what about permissions on other schemas?
I know I can do a:
select * from session_privs
which lists my session privileges.
What other views (are they views/data dictionary?) that I can use to see what I have? Since this is a normal user, they don't have access to any of the DBA_ views.
I'll start here for now, but being able to see everything this user has, would be fantastic.
Cheers,
TCG

Sorry. should have elaborated more.
In SQLPLUS, (logged in while logged into my Linux OS), I am working to try and get sqlplus to display the results of my query so it is easy to read. Right now, it just displays using the first 1/4 or 1/3 of the monitor screen to the left. Make sense? So it does not stretch the results out to utilize the full screen. it is hard to break down and read the results because they are "stacked" on top of each other.
Would be nice if I could adjust sqlplus so the results are easier to read.
HTH.
Jason

Query created in production system and object changeability

Hi,
The production BW has the object changeability for query elements set to 'Changeable original'. Some queries which have been created in this system can be changed, others, which have also been created in the system, can not.
All queries are assigned to the development packate $TMP. None of them have been transported anywhere, nor have they been created somewhere else and transported into the system.
The system is BW 3.5, SP 17.
Has anyone got any idea what the problem could be?
Best regards,
Rita

Hi,
The object changeability in the system is set to 'Changeable Original' and I know where to switch from 'not changeable' to 'changeable original' to 'everything changeable'.
The normal development cycle sees reports being created in the development system and then being transported through to the production system. Here, they should not be changeable. However, users with the relevant authorisation should be able to either -
- create new copies of these reports and change them or
- create new ad-hoc reports and also change these
We have several of these reports on the production system. The object changeability is set to 'changeable original', as I mentioned. I would expect that all queries which have been created on this system and never transported (either in or out of the system) should be changeable, based on this setting. However, some are, some ar not. The error message when trying to change the 'non-changeable' ones is 'Operation falied! No error message available from the server'. If I make a copy of one of these queries, hoping to save is as an ad-hoc query and change it, the error message is 'query could not be saved due to a problem in transport'.
How come some can be changed, others can't? Is there anywhere I can check what the difference is between the changeable and non-changeable reports which have been created on the system?
Best regards,
Rita

Where is the getString() implementation for RS and Object class question

Dear all,
I had these two questions ringing since a long time.
1)ResultSet is an interface.
In my jdbc code I have generally written rs.getString() and rs.getInt etc.. without giving a second thought as to where exactly is this getter implemented !
I have RTF API .. without too much help.
Could some one kindly explain Where is the implementation of the getString method ?
2) Could you please tell why the Wait() Notify() and NotifyAll methods have been implemented in the Object class ? What was the need to define em in the Object class ?
Thanks in advance for your time spent on this.
Rgds

Sarvananda wrote:
In the MySQL driver for example it's implemented in com.mysql.jdbc.ResultSet Right. Now it makes sense to me. Every single db that gives me a driver will have their specific implementation for the interface methods of ResultSet.
>
why do you need that?
..Thats a design decision
One of my friends asked me this and I was caught unawares. Any ideas on what factors could have made this design decision ?
Rgds
>
In the MySQL driver for example it's implemented in com.mysql.jdbc.ResultSet Right. Now it makes sense to me. Every single db that gives me a driver will have their specific implementation for the interface methods of ResultSet.
>
why do you need that?
..Thats a design decision
One of my friends asked me this and I was caught unawares. Any ideas on what factors could have made this design decision ?
A desire to not have to couple your code to a particular database and JDBC driver. It's a classic example of the abstract factory pattern

JNDI bind/rebind and object state question

Hi,
I have an object that is part of an EAR application that is deployed into an app server. I load a Webapp that initializes an object and then binds it to an initial context under java:comp/env setting some initial state.
However, when I access the object from an MDB as part of the EAR application, the state, when retrieved from the same context, was not retained. Here is the code I am using to bind the object to the context:
if (!object.isRunning()) {
       System.out.println("Starting App...");
       object.start();
       try {
           getNamingContext().bind(object);
       } catch (Exception e) {
           System.out.println("Name bound already, rebinding...");
           try {
               getNamingContext().rebind(object);
               e.printStackTrace();
           } catch (Exception e1) {
               e1.printStackTrace();
       System.out.println("Broker started...");
   }When I retrieve the object from the initial context as part of a message received within an MDB, the state is such that the object is always failing the .isRunning method test and subsequently throws an exception.
What am I doing wrong? Is this related to the fact that possibly the WAR and the MDB create duplicate contexts when I expect there to be only one?
Any insight is greatly appreciated.
Thanks,
John

following procedure works fine for now, if there is any straight forward solutions,
that will be helpful.
1) Create the Subcontexts for each of the sub entries in the jndi name tree
2) bind the object to the last entry in the tree.
i.e if the jndi tree name is "one.two.three", and the bind object is Obj
ctx = ctx.createSubcontext("one");
ctx = ctx.createSubcontext("two");
ctx = ctx.bind("three", obj);
Thanks,
Gangs.
"Gangadhar" <[email protected]> wrote:
>
Hi,
I am trying to bind the local object to the Weblogic JNDI, using the
code below.
It works fine if the bind name is a straight forward String(not a tree).
It is
throwing naming Exception when i am trying to bind into a new tree.
Thanks,
Gangs.
//GETTING THE INITIAL CONTEXT:
private Context getInitialContext() throws NamingException {
Properties h = new Properties();
h.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
h.put(Context.SECURITY_PRINCIPAL, "user");
h.put(Context.SECURITY_CREDENTIALS, "password");
h.put(Context.PROVIDER_URL, url);
return new InitialContext(h);
} catch (NamingException ne) {
log("We were unable to get a connection to the WebLogic server
at "+url);
log("Please make sure that the server is running.");
throw ne;
private registerObject()
throws NamingException
// Lookup the beans home using JNDI
Context ctx = getInitialContext();
try{
//This binding works fine.
String bname = "Ganga";
ctx.bind("plainname", bname);
//This one throws an Naming Exception..
ctx.rebind("one.two.three", bname);
} catch(javax.naming.NameAlreadyBoundException nlb){
System.out.print(nlb.getMessage());
System.exit(0);
}catch(javax.naming.directory.InvalidAttributesException iae){
System.out.print(iae.getMessage());
System.exit(0);
}catch(NamingException ne){
System.out.print(ne.getMessage());
System.exit(0);
Exception msg is : Unable to resolve 'one.two.three' Resolved: '' Unresolved:'one'

3D repousse objects and linking / rotation question

In Photoshop CS5 Ext, I have 4 layers, each with a 3D repousse object on them. I want to somehow link them, so that I can rotate the object as a whole (or the camera), but also want to still be able to manipulate the objects separately (like rotate and position). Is there a way to do this in PS, or does this need to be done in another program like Flash? Tried unsuccessfully using merge 3D, linking, grouping...
Thanks,
John

Thanks Steve for the reply and screenshot.
I see that 3D panel will let me rotate, etc., but it doesn't look like I will be able to rotate objects separately using animation from the timeline, will it? That is another thing I forgot to mention that I want to do, is be able to animate (rotate and move) the objects separately.
Thanks,
John
From: SG... <[email protected]>
To: PSJK2011 <[email protected]>
Sent: Sunday, September 25, 2011 9:37 PM
Subject: 3D repousse objects and linking / rotation question
Re: 3D repousse objects and linking / rotation question created by SG... in Photoshop Windows - View the full discussion
Hi John,
Merging 3D layers should be what you want. When you tried this what failed? If it was that you could only transform all of the objects instead of each separate object, then you'll need to make sure you are using the appropriate 3D tool. The UI needs some work to make this a bit easier to discover.
There are 3D Mesh tools in the 3D panel that allow you to manipulate individual meshes, instead of the whole scene (3D Object tools).
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-3937802-84277/176-600/3DMeshTo ll.png
regards,
steve
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3937802#3937802
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3937802#3937802. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Windows by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Object Changeability

Hello,
I was looking at our Production BW system. I was told that the system is <i>globally</i> set to "not changeable".
However when I look in 'Administrator Workbench: Transport Connection' and I click 'Object Changeability' everything in there is set to 'Everything Changeable'
My question is - How does this effect my transports and my ability to collect objects and transport them into production from my Dev box?
Thanks Nick

Hi
It does not affect the ability to transport from D->Q->P.
It just not allowing to make direct changes to P.
In your D sys you can make any changes you like, and then transport it thru the lndscape.
Sometimes it is helpfull to make changes in P, mainly in day to day operations such as Activating Objects and fixing data loads.
Reg's
Edan

Recommendation needed on: Locking Down BW Client / Object Changeability:

Hello Experts,
We recently had a problem on our production box and we found the need to lock down the environment with scc4.
We further used object changeability to control the environment and it has been hell ever since. Users have had difficulties running queries, etc.
In a typical BW production environment, what is the approach and what is the common practice?
(Please for each recommended approach include any command you mention)
For example, what transaction do we use to see various users and their authorizations, etc. Who made modification on which object, etc.
Thanks.

Hi Amanda,
In SCC4, you should maintain following values.
Under
>Changes and transport for client specific objects
no changes allowed
under
>Cross client object changes
no changes to repository and cross client customizing
objects
Under
> Protection : Client copier and comparison tool
Protection level 1: NO OVERWRITING
Regards
Sriram

Object changeability: why are some queries now unmodifiable..?

Hi Experts
I recently had BASIS open our BW Production client so I could activate a cube that had been deactivated after a transport to BWP. Then BASIS closed the client (setting = unmodifiable).
After this, some queries in Production are now not available for change. We get this message:
Diagnosis
You want to change objects although the system setting is "Not Changeable".
System Response
The objects cannot be changed.
Procedure
Change the setting for the system or client to "changeable". You can do this using transaction SE06 or SCC4.
For some reason this only occurs for some queries, not all. Some are OK to change, just as they were before.
The client settings are unchanged. I have checked the object changeability options in the Transport Connection - just about everything is set to Everything Changeable or Changeable Original.
Why have some of our queries suddenly become non-changeable??
Points will be given of course for any advice. Thanks in advance
tony

Gents
Thanks for your replies. Unfortunately, none of these suggestions made any difference to the problem although they were good things to check.
It turned out that there was role that had changed, and the cause of the problem was simple authority. The message about the client needing to be opened was a Red Herring..
Bad messaging on SAP's part.
Once again, thanks for your help.
tony

I don't know what's wrong with my code. it's about class and object.

* This is generic type of Person
package myManagement;
* @author roadorange
public class Person {
private String SS;
private String firstName;
private String lastName;
private String middleName;
private String phoneNumber;
private String address;
private String birthDay;
public void setSS (String SS) {
this.SS = SS;
public String getSS() {
return SS;
public void setFirstName (String firstName) {
this.firstName = firstName;
public String getFirstName() {
return firstName;
public void setLastName (String lastName) {
this.lastName = lastName;
public String getLastName() {
return firstName;
public void setMiddleName (String middleName) {
this.middleName = middleName;
public String getMiddleName() {
return middleName;
public void setPhoneNumber (String phoneNumber) {
this.phoneNumber = phoneNumber;
public String getPhoneNumber() {
return phoneNumber;
public void setAddress (String address) {
this.address = address;
public String getAddress() {
return address;
public void setBirthDay (String birthDay) {
this.birthDay = birthDay;
public String getBirthDay() {
return birthDay;
public void Person() {
SS = "1234567890";
this.firstName = "abc"; //test the keyword "this"
this.lastName = "xyz";
middleName = "na";
phoneNumber = "123456789";
address = "11-11 22st dreamcity ny 11111";
birthDay = "11-11-1980";
public void print() {
System.out.println("Display Database\n"
+ "Social Security Number: *********" + "\n"
+ "First Name: " + getFirstName() + "\n"
+ "Middle Name: " + getMiddleName() + "\n"
+ "Last Name: " + getLastName() + "\n"
+ "Phone Number: " + getPhoneNumber() + "\n"
+ "Address: " + getAddress() + "\n"
+ "getBirthDay: " + getBirthDay() );
package myManagement;
//this class is used to test other class or test other object
public class testClass extends Person{
public static void main(String[] args) {
Person obj1 = new Person();
obj1.print();
System.out.println(obj1.getFirstName()); //test the object
Result:
Display Database
Social Security Number: *********
First Name: null
Middle Name: null
Last Name: null
Phone Number: null
Address: null
getBirthDay: null
null
i don't know why it's all null. i assign something in the default constructor. it shouldn't be "null".
does anyone know why?

when you create 2 class using netbean editor, person.java and test.java
i never compile person.java.
when i finish typing these 2 class and i just right click test.java and run.
my question is do i need to compile person.java before i run test.java directly??
does Netbean compile it automatically when i run test.java first time?
i add another constructor Person constuctor with one parameter in Person.java and create 2nd object to test the 2nd constuctor and run.
All the codes work, so does the first default constructor. i don't why is that.
Then i removed what i added and restore back to where it didn't work before and test again. it works.
@_@. so weird.
problem solved. thank you
Edited by: roadorange on Feb 25, 2008 7:43 PM

Help In ABAP Object Certification Question

Hi ABAP Gurus,
iam going to write certification Exam on Nov 11. i have got some model question from SAP domain for all the topics Except ABAP Objects which is so important...
Please anybody send me some Example question you guys got from the Certification Exam
it will be be grateful to me...
Thanks a lot in advance.
Prabhu
SAP Lead Consultant

Hi,
Sending ABAP Objects questions is not an option but normally, your concepts are tested for:
- Classes and objects
- Inheritance
- Casting
- Interfaces
- Events
- Global classes and interfaces
- Exception handling
- Dynamic programming
You can use help.sap.com to take a look at these topics one by one. Hope this helps.
Good luck.

XML attributes and object types

I want to create an XML Document of the following form
<family>
<parent attr1="val1">
<child attr2="val2" attr3="val3"/>
</parent>
</family>
Using object table and object type (for the child element), I am able to produce the following XML Document (with a "select * from family" query)
<family> 
<parent> 
<attr1>val1</attr1>
<child>
<attr2>val2</attr2>
<attr3>val3</attr3>
</child>
</parent>
</family>
The question is: how am I going to query these data so that the "attr" elements are mapped to attributes (using XSU only, without XSLT)?
I have already tried the following:
1. Using
SELECT attr1 as "@attr1",
f.child.attr2 "@attr2",
f.child.attr3 "@attr3"
FROM family f
all the attributes are obviously appended to the "parent" element.
2. Using nested table for "child" and the following query
SELECT attr1 as "@attr1",
CURSOR (
SELECT n.child.attr2 as "@attr2", n.child.attr3 as "@attr3"
FROM TABLE(f.child n)
) AS "child"
FROM family f
I am getting the following document
<family>
<parent attr1="val1">
<child>
<child_ROW attr2="val2" attr3="val3"/>
</child>
</parent>
</family>
Is there a smart SQL query to produce the desired document? What data types
is it recommended to use to define my db schema (object types, nested tables...)?
Thank you in advance
null

Finally, I got the desired XML format output from relational tablse using schema based XMLType views.
Wherein I created Object Types from relational table, generated the schema for the Object type, registered the schema and finally created XMLType Views for populating the XML data from Relational Tables.
I guess, you all might aware of my problem, where I got struck. Instead of printing the data in XML format I am successful in generating the XML format data Using the Query Select from BLABLA_Type_view* . I am able to print the number of rows, that I require which is in the fallowing format.
Column Name
1. SYS.XMLTYPE ----- As a row
The view I am querying for is printing the data in a string format, where in I got to do the fallowing query
SELECT SYS.XMLTYPE.getStringVal(OBJECT_VALUE) FROM BLABLA_Type_view. Which ultimately gave me the required data in XML format with tags.
Thanks for every one who tried to give a try to solve, especially "mdrake"

Is there a way to add new objects to object changeability list?

My production system is locked and I need to change object type RSFO (formula). I looked at the object changeability list and it does not contain RSFO. Is there a way to add this object to this list so I can change it directly in production? Thanks.

hi,
I hope you can create similar formula in the production. as in the production we can change the reports,proces chain,aggregates, infopackages.
Ramesh

Class and Object name change in the universe designer

Hello Experts
I have a confusion , I am just wondering if I devlop a bobj universe, lets say, based on SQL database and change the name of the class and object during the creation of the universe, will that fetch the data from d/base properly while running a query / report. Although universe class and object has different names than database now but the records are the same. Do we need to point the object to d/base object in some kind of different or special way .
To make my question more simple, In d/base table name is "Employee" whereas on universe side I create a class name "Staff" and at the same time field name in the database is "Emploee ID" whereas in the universe I named it "Badge number".
Please advise if that will make any difference while I run the query or Is there any kind of complication on the universe side that I should expect which I am not familiar with.
I would apprecite your response.
Best Regards

Hello experts,
Let me rephrase the issue with exact scenario.
I have a table names "REGION" with fields region id, region and country id.
I have another table name REGION_SLINE with fields SL_id, region id and Sales_revenue.
I created an equi join between these two tables based on region id field and checked the cardinality which is ok.
Now when I try to create a report based on sales revenue per customer ( "customer's first name" is an other field on CUSTOMER table), I dont get any result in the report and get a message that "No data to reterive"
Also please note that when I run a report which is sales revenue per region id, I get the result, seem slike these two tables REGION and REGION_SLINE can generate the report but sales revenue per customer report is not generated because customer first name is a field of another table.
I was just wondering if I need to write some kind of where clause in the object properties of region id which is used to create equi joon link.
I woulld appreciate your response.
Regards
Edited by: SAP_LCCHS on Jul 4, 2011 9:19 AM
Edited by: SAP_LCCHS on Jul 4, 2011 9:21 AM

SCC4 and Object Changeability question

Similar Messages

Maybe you are looking for