SCCM 2007 - All clients from primary site have vanished from central site collections

Hi all,
we have a SCCM 2007 R2 setup with one central site, one Primary Site (A) with a secondary site hanging off it and another Primary Site (B). Suddenly all the clients from the Primary Site A (and also it's Secondary Site) have vanished from the central
site. All the clients are still present when we check Collections from the admin console on Primary Site A site server - they have simply disappeared when we check Collections from the Central Site admin console.
Can anyone provide any info on a good starting point for troubleshooting this issue? As a sidenote, we can still push packages out to the Primary Site A distribution point and both the Primary and Central site can communicate/ping each other.
Any help/info would be much appreciated!
Thanks

Check the
site replication on central site, is that SQL is working fine, and also see the
inbox folder in central site, might be there is backlog and those DDR files are
not processing, and after maintenance they got deleted.<o:p></o:p>
please run
the heartbeat discovery by hour or day, and once the clients will sent all the
DDR files then they will appears again.<o:p></o:p>
Sharad Singh | My blogs: SharadTech | Twitter:
@SinghSharaad | | Please remember to click “Mark as Answer” on the post that helps you.This can be beneficial to other community members reading the thread.

Similar Messages

Just updated WD Drive Utilities - now all my WD external disks have vanished from desktop

I have just been using one of my 4TB My Book external disks on a MacBook AIR running 10.10.4All well and good. Only 1 installed at a time using the USB port. But the system told me there is a WD update so I installed it. Immediately after installing WD Drive Utilities and trying it out the WD disk on the desktop greyed out, then vanished completely. I pulled out the USB cable and put it back into the MacBook. The desktop icon for the WD drive reappeared, but greyed out, then vanished. So I thought it must be the new update so I uninstalled it using the WD Uninstall program. Same problem. I have an older (2014) WD Drive Utilities install-software on a MyPassport drive so I plugged in the USB for that drive, same problem, that is also greyed out and then vanishes from the desktop. So I tried the My Book again, using Disk Utilities in the MacBook. It sees the drive at first, but then it vanishes within 5 seconds. Disk Utilities says "Error: A disk with a mount point is required". I am very loathe to plug in my other 2 MyBook 3TB drives in case these also vanish or become unuseable for this same reason. I have a huge amount of data backed up on all of these disks. I think the disks are okay and maybe if I can get hold of older WD software from 2014 then I can backtrack and put it back the way it was. As a first step does anyone know where I can get hold of older WD software such as Drive Utilities (I think that was the one which did it). Or is there some files it has installed on the MacBook hidden away somewhere which I can delete?

July 2015 Solution for Multiple Problems with a New ‘My Passport for Mac’ (Note: I am posting this same message in response to several topics in this Forum, since the symptoms sounded similar to mine and I suspect WD software is causing them.) Like many other Users here, I recently bought a new external WD drive. The irony here is that I already own 3 other WD external drives, and they have been running fine for several years on our two Mac computers for photo and backup uses. Not so with this new drive. Following the WD installation steps, I first installed their software WD Drive Utilities and WD Security. And then my confusion started, because I now got the message ‘Error in RAID configuration’, even though I don’t use RAID and had done nothing except plug in the new drive. I ran the WD Drive Utility, Status Check, and my laptop actually crashed! I also saw the new drive mount at first, then spontaneously dismount after a minute or so. I even dismounted the new disk, mounted one of my older disks I have used for several years, and now it reported ‘Error in RAID configuration’, something it had never done before, and when I ran the WD Drive Utility, Status Check, on my older Passport drive my laptop again crashed. Like others here, I wasted a lot of time trying to resolve this, but let me skip all that and get right to what I did to get this new disk (and my old ones) to work correctly again. Solution which worked for me: I uninstalled the WD Drive Utilities software (the entire folder) completely. So far I have not uninstalled the WD Security software, although I have not dared to use it yet and likely never will. To uninstall WD Drive utilities, I used the free app AppCleaner from freemacsoft.net (NOT the app in the Mac App store similarly named App Cleaner; it may work just as well, but I have never used it.) Now that the WD Drive Utility is off my computer, I can use the new WD Passport and all my older Passport drives. I have run Apple’s Disk Utility, Verify, numerous times on the new drive, and using Carbon Copy Cloner I have cloned up to 340 GB to the new Passport drive, followed by Verifying it, without errors or any of the symptoms listed above. WD versions for me were: WD Drive Utilities 2.0.2.18, which folder contained WDDriveUtilityHelper 1.0.0.16. I hope this helps others on this Forum.

Unable to install BR&E Promax license on a SCCM 2007 R2 client

Unable to install BR&E Promax license on a SCCM 2007 R2 client
in Execmgr log could see below entries,
Program exit code -1073741510 in execmgr
Script for Package:xxxxxx, Program: Install failed with exit code 3221225786

Unable to install BR&E Promax license on a SCCM 2007 R2 client
in Execmgr log could see below entries,
Program exit code -1073741510 in execmgr
Script for Package:xxxxxx, Program: Install failed with exit code 3221225786
That error code is from BR&E Promax and not from CM07. You need to contact them to find out what it means.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

I just backed up my 3gs iphone using itunes. All my photos and contacts have disappeared from my phone. I am unable to locate them on my computer. HELP!!!

I just backed up my 3gs iphone using itunes. All my photos and contacts have disappeared from my phone. I am unable to locate them on my computer. HELP!!!

OK, I understand. Try this ... it's much safer. It will simply restore your backup, but not do anything to your iOS:
While your iPhone is plugged in to iTunes, right click on the iPhone icon on the left side of the iTunes display.
Choose "Restore from backup ..." from the pop-up menu that appears.
Again, what this will do is place that backup back on your iPhone without changing iOS. So you should be very confident in the backup contents before doing this.

How can I find my email in Apple Mail from before my company switched hosting providers? People with Outlook have all of their old and new emails. My old emails have vanished from Apple Mail.

How can I find my email in Apple Mail from before my company switched hosting providers? People with Outlook in my company have all of their old and new emails. My old emails have vanished from my Apple Mailbox on my macbook and other Apple devices. I do not have my mail backed up in time machine recently nor did I export my emailbox recently. Any ideas?

Try looking in your User folder.
Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail/V2
If you prefer to make your User library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I have to use it again after every update. I have also been informed that if you drag the user library to Finder it will remain visible.

My CS2 has worked fine for serval years. All of a suddend my user name, Alan Ford, and sereal number have vanished from my program. How do I correct this?

My CS2 has worked fine for serval years. All of a suddend my user name, Alan Ford, and sereal number have vanished from my program. How do I correct this?

Hello,
Why do you need to use the regasm utility from the post-build action?
There is a difference between signing the assembly with a strong name and digital signature. The
How to: Sign an Assembly with a Strong Name article in MSDN explains how to sign an assembly with a strong name (.snk). See
How to digitally sign a strong named assembly for adding a digital signature.
You may also find the
What's the Difference, Part Five: certificate signing vs strong naming article helpful.

HT5570 I have forgoten the security questions,i have tryed ewerithing to reset all of the instructions i have recived from the apple support team. I still can not reset the questions. Can some body please help me to reset them. Thank you and best regards

I have forgoten the security questions,i have tryed ewerithing to reset all of the instructions i have recived from the apple support team. I still can not reset the questions. Can some body please help me to reset them. Thank you and best regards

Since this is a user-to-user support forum, there isn't much we can do other than refer you to the following instructions and as noted in the instructions, then to Apple Support if you can't reset as shown in the instructions: If you forgot the answers to your Apple ID security questions

All items in my sidebar have vanished, except under "Devices."

All items in my sidebar have vanished, except those under "Devices." I have all sidebar items checked in preferences. It is maddening. Please help.

I can't remember if this works in 10.6.8, but hover the mouse on the top right side of the Sidebar across from Favorites and see if it reveals "Show". If so click Show
It works that way in ML

OSD: upgrade sccm 2007 (XP) client to 2012, then deploy TS

Hi,
We have some Windows XP machines in our SCCM 2007. They are discovered via AD in SCCM 2012.
Now we would like to upgrade their client to SCCM 2012 then deploy (available) a task sequence to it (Windows 7 install). This way users can choose whenever to upgrade to Windows 7.
My questions:
*When I right click an XP/SCCM 2007 client and choose upgrade, nothing happens. How can I troubleshoot/follow the upgrade?
*Should the task sequence (SCCM MDT) contain a particular step or can we use the same as a bare metal (PXE) deploy (we do not want to keep any data from the pc)?
Please advise,
J.
Jan Hoedt

Do I understand it correct, that you are trying a Client Push Installation? If so, then start with looking at the ccm.log on the server-side for errors. That log file contains all the information about the push action.
You should be able to use the same task sequence. Just check the deployment settings and the first action of the task sequence (make sure it restarts in WinPE).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2007 migrated clients (SCCM 2012) are still visible

Hi,
We migrated some SCCM 2007 Windows 7 clients to SCCM 2012 (upgraded the clients via push).
This worked fine for most of the clients but not all so I cannot just delete clients from SCCM 2007.
How can we clean the succesfully migrated? I cannot see which ones are succesfully migrated in SCCM 2007, the all show active (even the succesfully migrated ones).
Pls advise.
J.
Jan Hoedt

The client will become inactive if it's not requesting client policies, sending heartbeats, sending inventories, or sending status messages any more in a period of by default 7 days (but it all depends on the configured intervals). Also, if you
delete clients that are still active, they will come back with the next heartbeat if they are still active.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

All of my emails have vanished from inboxes on ipad and servers - is this a problem with the ipad operating system?, All of my emails have vanished from inboxes on ipad and servers - is this a problem with the ipad operating system?

Last night I went to check my emails on my ipad and noticed that all of my inboxes (gmail, yahoo and exchange) were completely empty. I logged on to each individual site on my computer and the inboxes were empty there as well, with no trace of the lost messages in any trash folders or other folders. Obviously this is completely unacceptable as I have lost hundreds of important emails. Upon searching online I found that other people have experienced the same exact thing but apple has provided no explanation. As the only device that I use to access these 3 email accounts is my ipad I feel like it must have come from there. The chance of all 3 servers malfunctioning and clearing my inboxes at exactly the same moment last night is too ridiculous to contemplate, despite being suggested by the customer service advisor that I just spoke to. And I have no other evidence that my accounts have been compromised, and they have separate usernames and passwords anyway. Has this happened to anyone else? Or can anyone provide any sort of explanation? Thank you

You're welcome. As to checking speed go to http://speedtest.net/ and it will choose the closest server for you. BTW, whatever you do, don't click on the robot icon that says "Start Scan" or MacKeeper below that. Only use the speed test in the middle that has the button BEGIN TEST on it. It will run a download speed test first and then an upload speed test. The download test will give a much faster response.

All my old pusrshased apps have dissapeard from iTunes and AppStore, what can I do?

All my old pusrshased and even the free apps have dissapeard from iTunes and AppStore, theres only ten apps that appear on the list, what can I do?

This suddenly happened overnight and you haven't touched your devices since you last saw the apps, or have you been doing things that might indicate a cause for this?
If you really haven't done anything at all and these are old, old apps and they were withdrawn by the distributors then perhaps they are gone (which is why you need to make your own backup of everything you buy and not rely upon it always being on the Apple site).

How do I transfer all of my songs from Iphone to itunes as lost everything, some songs are not bought from itunes and have been from borrowed CD's but I really want them in itunes library?

Hello, Please help as I tunes havent got back to me yet!!
A couple of months ago, I lost all of my music/itunes etc as my computer needed a complete restore. When it re-installed itunes there was no songs on it at all and would only let me transfer the purchases made on my iphone from itunes back onto my library. The problem I have is that I want to upgrade my phone to the iphone4 but dont want to lose all of the songs on my iphone, some are downloaded from the itunes, most are from CD's that I still own but there are some great songs that I have put on from borrowed CD's or another download company i.e. hmv music downloads and those are the songs it will not let me transfer into the library on my computer so when I get the new phone, I could just sync and they will all be there.
Please help as I do not want to lose any of my songs
Thank you

for purchases from the iTunes store do this:
connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
for everything else check out this post by Zevoneer.

All of my safari bookmarks have disappeared from all of my apple devices and I did not delete or move them

My safari bookmarks have disappeared from all of my apple devices and I have not deleted or moved them. Any ideas on how I can recover them?

Triple-click anywhere in the line below on this page to select it, then copy it to the Clipboard by pressing the key combination command-C:
~/Library/Safari
Quit Safari.
Select
Go ▹ Go to Folder
from the Finder menu bar. Paste into the text box that opens by pressing command-V, then press return.
A folder window should open. Restore the file named "Bookmarks.plist" in that folder from a backup that predates the unwanted changes.

All photos NOT taken with my iphone have vanished from iphoto

I have just found that all pictures in iphoto except those taken with my iPhone have simply gone. I have searched for them but they don't appear to be anywhere on the machine. Furthermore, I have two cameras that I have downloaded images from quite happily for years from and now my Macbook can't download from them. It doesn't recognise one and just says there's a fault and it can't download images from the other.
Can anyone help?

The preceding reply is only accurate in part.
You, too, can influence the way your photos look in an email message read on your friend's computer. You do not say how you enclose the photos as attachments, so I hope you are using the email button at the bottom of the iPhoto window (after having selected the one or more photos you wish to send). Clicking the email button should bring up a dialogue window, asking you to select the Size of enclosure you wish to send: using the drop-down menu, you can select between Small, Medium, Large, and Actual size. The size you select will depend on the eventual use that is to be made of the photos: if this is simply for viewing in the email message, then Small and Medium are appropriate; if the photos are to be viewed more closely, or printed at a relatively small size, then Large might be a better choice; if the photos are to be further processed, or printed in rather better quality, then Actual size is what is needed (actually, you might then simply prefer to send the originals).
The other selection boxes in the dialogue window are to allow you to include textual information, embedded in the photo file(s). Such information should already have been entered in the Information panel in iPhoto for each photo. Usually, you can leave these selection boxes unchecked.

SCCM 2007 - All clients from primary site have vanished from central site collections

Similar Messages

Maybe you are looking for