SCCM 2012 application catalog items not showing up

I have an SCCM 2012 package which is being deployed to a device collection
The users are not seeing this package appear in the application catalog, nor is it appearing in the software centre
Can we no longer deploy (advertise) to device collections for the users to install when needed?

If it is not appearing in Software Center, then either the deployment policy has not been retrieved by the client, it is not in the target collection, or has been filtered out due to platform restrictions (or some other restriction like that). Or the client
is not able to communicate with the MP, which would be a cause of the first option (the policy has not been retrieved by the client). You'd need to check to ensure that all is working on that end.
Wally Mead

Similar Messages

  • Are there any command line utilities(@client machine)/APIs to initate software installtion from SCCM 2012 application catalog?

    I'm searching for any utilities / APIs available for SCCM 2012 Application catalog, to initiate a Application installation from a Script(From client machine). Got to know there Client programming is possible, but not able to get good examples. Please help
    Regards, Eswar

    Hi,
    Hope the following sample could help you.
    Sample SCCM Application
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SCCM 2012 Application Catalog shows ALL advertised to a user independant of the OS they are using

    Within SCCM 2007 if a package was to be made available only to the following platforms, it would only show up on those platforms... If a user was using Win XP and had a package meant ONLY for Win7 advertised to them, they would not see it.... It seems as
    though in CM12, if a user has advertisements meant for XP, Win7, 64 bit, etc... everything appears in teh application catalog. I also understand that the software center is meant for application publishing and not for regular packages as they were in 2007...
    Is there a way to make the packages meant for XP to only appear in the users catalog and NOT show the Win 7 packages?
    As we are in the middle of a Win 7 migration, we need to manage this without a lot of work within AD...

    Hi,
    In Configuration Manager 2012 packages and applications that are made available to users are always displayed in the Application Catalog, the platform requirement is not evaluated until the user actually tries to install the application then the requirements
    are evaluated and the installation will not continue if there the requirements doesn't match the plattform.
    Software Center will display all packages/programs and applications that are deployed as "available" to devices and not users. User targeted will always show up in the Application Catalog..
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • SCCM 2012 Application Catalog Website Point role Status is critical

    Hi team,
     In a client's SCCM 2012 R2 environment there is a Critical Icon and Status against one of two Application Catalog Website point roles. Looking at the Component status, there are no errors and all the components show as green.
     Trying to find any warnings or errors in the messages for the Site System role doesnt show any errors, and I tried to reset counts but this has not changed the status.
     I am not sure where to go from here. The application catalog itself works and is up. All the services are running. I am unsure as to where this error status comes from or what it pertains to.
     Any advice would be appreciated.

    Hi,
    Please check portlctl.log and awebsctl.log to see if there is any error.
    You could also check the thread below.
    Symptom: Reporting Services Point Status (under Monitoring - System Status - Site Status) appears as Critical, No error messages in logs or status messages
    Cause: 'Status' can be set to "2" for 'SMS SRS Reporting Point' in dbo.summarizer_sitesystem table in sql
    Resolution: > Run below query:
    update dbo.summarizer_sitesystem set status = '0' where SiteSystem = '["Display=\\abc.local\"]MSWNET:["SMS_SITE=ABC"]\\abc.local\' and role = 'SMS SRS Reporting Point'
    > It should set the status back to 0.
    > Check in console and errors should go away.
    > In case if value reverts back then check below namespace in wmi of site server:
    root\sms\site_pri\sms_sitesystemsummarizer
    > check the value for reporting services point, ideally it should be 0, let's say it's set to 2 there as well then remove role of reporting services point.
    > if entry for reporting services point goes away from both the places then it's good, you can re-install the reporting services point and it should work fine.
    > Let's say if value/values doesn't get removed from sql/wmi , remove them manually via queries and then go with uninstall and re-install.
    > then it should work and errors in console and common.log should go away.
    https://social.technet.microsoft.com/Forums/en-US/5e0b7af6-f00c-4610-a709-f3e0e26505be/sccm-2012-monitoring-site-status-reporting-services-point-status-critical?forum=configmanagergeneral
    Best Regards,
    Joyce
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • SCCM 2012: application catalog asks for credentials

    Hi,
    Our application catalog was working fine for weeks. Now suddenly it asks for credentials, the sccm-server is added to trusted sites.
    Please advise.
    J.
    Jan Hoedt

    Disable it in client settings. Run a machine policy retrieval on an effected device. Confirm the policy run has complete in the policyevaluator.log. Check IE and confirm it's not trusted. Re-enable the setting and re-run process. Check it works or not.
    Also ensure that nothing in GPO is overwriting what you have set in client settings.
    Cheers
    Paul | sccmentor.wordpress.com

  • SCCM 2012 application portal: config questions

    Hi,
    We have setup SCCM 2012 application portal correctly and it's working fine.
    However some config questions:
    -can we change the name of the configuration portal? Now its servername/CMApplicationCatalog ... what's not userfriendly.
    We'd like it to be applicationportal.ourcompany.com. Howto achieve that?
    -can we customize layout in a supported way (we could change html pages but after an upgrade of SCCM they would/could be erased)?
    -how does flexera (adminstudio?) plugs in into this. I've read this entry
    http://helpnet.installshield.com/appportal2014/Content/helplibrary/AP_CreatingCatItemSCCM.htm but what's the big picture here? Anybody using this? What are the advantages?
    J.
    Jan Hoedt

    We want to offer software center for overview of mandatory installs, application catalog for optional software.
    On our companies portal, we can then set a link which directs to the application portal. User can then install optional software from there.
    My current config works http://applicationportal.ourcompany.com/ goes to the sccm-server but not to the url below.
    That would be http://applicationportal.ourcompany.com/CMApplicationCatalog/#/SoftwareLibrary/AppListPageView.xaml
    how can I make sure the application portal shows up when this link is opened?
    It sounds like you want to perform a URL rewrite?
    http://www.iis.net/learn/extensions/url-rewrite-module/creating-rewrite-rules-for-the-url-rewrite-module
    You should test this to see if it's what you want - I may have misunderstood your question.
    Also, I wouldn't host this module on your AppCatalog server, I'd host the rewrite module elsewhere.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • SCCM 2012 software update point not sync with Microsoft Updat,

    Hi 
    Recently my SCCM 2012 software update is not syncing with microsoft update, am getting below error.  can any one suggest/help me how to resolve this issue.
    WebException: The remote server returned an error: (500) Internal Server Error.
    at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
       at System.Net.HttpWebRequest.GetRequestStream()
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetAuthConfig()
       at Microsoft.UpdateServices.ServerSync.ServerSyncLib.InternetGetServerAuthConfig(ServerSyncProxy proxy, WebServiceCommunicationHelper webServiceHelper)
       at Microsoft.UpdateServices.ServerSync.ServerSyncLib.Authenticate(AuthorizationManager authorizationManager, Boolean checkExpiration, ServerSyncProxy proxy, Cookie cookie, WebServiceCommunicationHelper webServiceHelper)
       at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesFromUSS()
       at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)

    am just trying to tracert catalog.update.microsoft.com
    from my wsus server but it is failed, would that be the reason/
    Regards,
    Madhan

  • SRM 7.0 - Unconfirmed PO limit items not showing up when creating Invoice

    Hi Guys,
    For PO standard items, when creating an invoice and is unconfirmed, these items still show up in the invoice screen and the invoice gets created with the status 'Waiting for preceding document'. For unconfirmed limit items, these items do not show up at all in the creation of the invoice and displays an error. My question is how will I make the unconfirmed limit items scenario work just like the standard items scenario whereby instead of the unconfirmed limit items not showing up and generating an error, they will show up and have the invoice created with the status 'Waiting for preceding document'?
    Thanks in advance!

    Is this thread still valid? If not, please close the thread.
    If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
    Thanks
    Jason
    SDN SRM Moderator Team

  • In web console Attestation menu item not showing,after OIM 9.1.0.1 install

    In web console Attestationmenu item not showing,after OIM 9.1.0.1 installation
    Version: 9.1.0.1860.16
    Build 1860.16
    thanks.

    Choose option Oracle Identity Manager with Audit and Compliance Module during installation.
    INIYA.

  • Non app store items not showing up in launchpad

    Non-App store apps located in the Applications folder are not showing up in Launchpad (Example: Pixelmator).

    There's more than one page to Launchpad.  It seems that anything you install on your own will go to page 2 or later.  You can easily move them to the first page by draggin them around.

  • Applications Info Is Not Showing Up in the System Profiler

    My applications info is not showing up in the new system profiler. I get the message "no information found". Any help would be appreciated.

    I'd get them to send you another card.  If it works, great!  If not, then the connection on the computer is bad.  If that's the case, you can get a wireless PCI card or a wireless USB adapter, but the PCI card would be better.  Test it with another Airport card first though.

  • When switching spaces application menu is not showing

    I'm not sure the is a Snow Leopard specific problem, but I have certain applications assigned to certain spaces. When I switch to a space for that application and it has an open document, everything is fine. But if I close all of the document windows for the application and then switch away from that space and then back to that space, the Finder menu takes over. The application is still running, but I have to either click it's icon in the dock or cmd-tab to the application to get it's menu or toolbars to appear.
    Is this normal behavior? It's kind of a pain to mak sure that I at least have one open document window so that when I switch back to that space I don't have to "reactivate" the app. Just so I make sure i'm explaining this correctly...
    I have Photoshop in it's own space and then open the program and then don't open a document window and then switch to another space and then switch back to the Photoshop space, I now have the Finder's menu displayed and a blank desktop showing. I then have to click on the Photoshop icon or cmd-tab to the running application to get it's menus and toolbars to show.
    Thanks for your help.
    Mark

    First off, I meant to title this "When switching spaces application window is not showing."
    Just in case anyone else runs into this problem or any other weirdness with switching between spaces, the answer seems to be trashing the com.apple.dock.plist file and then restarting the dock. The preferences file can evidentially get corrupted and create some problems. Spaces does not have it's own plist file but stores it's data in the dock's plist file. Be warned that this will reset all of your dock preferences including which apps you have on the dock.
    Mark

  • SCCM 2012 Software Metering is not working

    SCCM 2012 Software Metering is not working in our environment. Other than software metering, reports work just fine.
    I have created a few simple software metering rules with “Acrobat.exe” and “Outlook.exe”. Rules are enabled. Rules were on at least 6 months.
    When I go to software metering reports, Month parameter value is empty and I can’t choose any value.
    I ran runmetersumm.exe on our server, it did not work as intended. :
    Summarizing data up to 0 hours old.
    File Usage Summary added -1 rows in 0 seconds.
    Monthly Usage Summary added -1 rows in 0 seconds.
    I am stumped. Why would it add minus rows?
    Any ideas how I can make software metering work on our environment?
    Thank you

    Finally figured it out.
    mtrmgr.log did not find any rules when I ran executables. So I knew it wasn't working on the server side.
    After searching for a while, I found the solution from the link below:
    http://social.technet.microsoft.com/Forums/en-US/8f048512-c357-437e-89ec-cee5356a10b1/software-metering-reports-empty?forum=configmanagergeneral
    1. Deleted RULECHG.RTA under policypv.box folder
    2. Removed and recreated metering rules again.
    Everything is working again now.
    Thank you.
    I do wonder how to avoid those problems going forward though.

  • DPM 2012 R2 catalog failing, not all database items are available for restore

    I recently started protecting my SharePoint 2013 site using DPM 2012 R2.  I was able to get item level recovery working, but not all of the database items are showing in the recovery section.  I go get the warning "DPM failed to gather item
    level catalog for 1 database(s) of the SharePoint Farm Some of the recovery points for these databases in the farm would be associated with an earlier successful catalog. (ID 3133)"
    I have looked on the SharePoint front end web server in the WssCmdletsWrapperCurr log file and I do not see any exception there.
    It it is strange because I do get the option to restore some items, just not all of them.  Any help would be greatly appreciated.

    Hi,
    Resizing the boot partition (usually C:) should not effect DPM in any way.  DPM writes directly to it's volumes contained in the storage pool and not through the mount points on the C: drive.    So is the DPM UI showing
    missing volume next to some data sources ?   Try doing a DPM disk rescan and see if that removes the missing volume flag. 
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
    posting is provided "AS IS" with no warranties, and confers no rights.

  • SCCM 2012 R2 Clients are not retrieving policy

    Hi - I know this question has been asked many times before - but I have tried almost everything and a no closer to solving the problem.
    Background: Recently a SCCM 2012 SP1 single stand-alone site was upgraded to SCCM 2012 R2. The site is a single stand-alone primary site with a single DP, single MP, using mixed mode
    (HTTP). The R2 upgrade ran without any problem and all SCCM components are showing as healthy.
    A few test SCCM 2012 SP1 clients were upgraded to the R2 client using client-push.
    However the upgraded clients are not retrieving policy from the Management Point. In the Actions Tab of the SCCM client, only Machine Policy Retrieval and User Policy Retrieval are available. But kicking of those actions does not
    result in any of the advertised applications, Task Sequences becoming available. Infact Custom Client Settings are not being set either (e.g. Organisation Name in software Center).
    I have checked and rechecked the following:
    The upgrade of the client completed successfully (checked ccmsetup.log) and the version number went from 5.00.7804.1000 (SP1) to 5.00.7958.1000 (R2).
    The MP health in the SCCM console is showing healthy.
    The MP access URL's load correctly when run from SCCm client computers
    “http://<ServerName>/sms_mp/.sms_aut?mplist” is ok
    “http://<ServerName>/sms_mp/.sms_aut?mpcert” is ok
    The SCCM clients are assigned to the site correctly – verified via the SCCM client and
    ClientLocation.Log
    ClientIDManager.Log is not showing any errors
    CCMExec.log and ExecMgr.log don't show any advertisements being executed (Execmgr.log is almost empty and only has "Software ditrbution site settings policy does not yet exist on the client). If the client is not yest
    registered this is expected behaviour")
    The SCCM clients are Approved and NOT Blocked in SCCM
    I have attempted to upgrade the SCCM client and also completely removed and reinstalled - and both have the same result (no client policy dpwnloaded)
    I have also deleted the above clients completely from SCCM, Run divoery again and pushed the client to the machines again ...with the same result (SCCM client installs, assigns to correct site and then no policy downloaded)
    SCCM 2012 Boundaries are configured correctly and assigned to Boundary Groups correctly
    The SCCM client’s do not have the firewall enabled
    Changed boundary from AD Site to Subnet to IP Address Range: Same issue exists
    Uninstalled MP role and reinstalled it: same Issue exists
    Tried to connect to SCCm client using 3rd party SCCM Client center tool but cannot connect
    ??? Not sure what else to try ???

    Hi all - sorry for the late response.
    We managed to resolve the issue after logging a job with Microsoft Support.
    The issue was that the SCCM 2012 R2 upgrade corrupted 2 tables in the SCCM Database - leading to corrupt SCCM client policies.
    I am pasting the resolution email from Microsoft below:
    (NOTE: This may not be the exact sypmtoms you are experiencing so do not implement this fix assuming it will fix your problem!)
    ISSUE: 
    - All clients are unable to download policies from the server
    CAUSE:
    - Bad policies in the Database
    RESOLUTION: 
    -Issue with PADbID - Run below query against SCCM DB to verify corrupt entries:
    SELECT * FROM
    ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
    Confirmed Bad policies entries in the SCCM database
    Run below query to delete the bad policy after which we resolved the issue:
    Delete FROM ResPolicyMap
    WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)"

Maybe you are looking for