SCCM 2012 Application Catalog Website Point role Status is critical

Hi team,
In a client's SCCM 2012 R2 environment there is a Critical Icon and Status against one of two Application Catalog Website point roles. Looking at the Component status, there are no errors and all the components show as green.
Trying to find any warnings or errors in the messages for the Site System role doesnt show any errors, and I tried to reset counts but this has not changed the status.
I am not sure where to go from here. The application catalog itself works and is up. All the services are running. I am unsure as to where this error status comes from or what it pertains to.
Any advice would be appreciated.

Hi,
Please check portlctl.log and awebsctl.log to see if there is any error.
You could also check the thread below.
Symptom: Reporting Services Point Status (under Monitoring - System Status - Site Status) appears as Critical, No error messages in logs or status messages
Cause: 'Status' can be set to "2" for 'SMS SRS Reporting Point' in dbo.summarizer_sitesystem table in sql
Resolution: > Run below query:
update dbo.summarizer_sitesystem set status = '0' where SiteSystem = '["Display=\\abc.local\"]MSWNET:["SMS_SITE=ABC"]\\abc.local\' and role = 'SMS SRS Reporting Point'
> It should set the status back to 0.
> Check in console and errors should go away.
> In case if value reverts back then check below namespace in wmi of site server:
root\sms\site_pri\sms_sitesystemsummarizer
> check the value for reporting services point, ideally it should be 0, let's say it's set to 2 there as well then remove role of reporting services point.
> if entry for reporting services point goes away from both the places then it's good, you can re-install the reporting services point and it should work fine.
> Let's say if value/values doesn't get removed from sql/wmi , remove them manually via queries and then go with uninstall and re-install.
> then it should work and errors in console and common.log should go away.
https://social.technet.microsoft.com/Forums/en-US/5e0b7af6-f00c-4610-a709-f3e0e26505be/sccm-2012-monitoring-site-status-reporting-services-point-status-critical?forum=configmanagergeneral
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Application Catalog Website Point Status Critical - But why?

I am having some tracking down what is causing this status on a customer's primary site. I've checked the portlctl.log and awebsctl.log where both show a status 0 of running. When I try to reset the status of the Application Catalog website point the status
does not reset and there are no error messages when I query the status messages. Is there something else I can do to try and get the status into the right state?
www.bighatgroup.com

I've seen this behavior more often, with different customers. It's always the Application Catalog web site point that shows an error state while it's functioning correct. From what I've seen, the behavior starts after a reinstallation of the role, either
because of a hotfix, service pack, or cu installation.
Also the only workaround I've found so far that works, is reinstalling the role again...
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Are there any command line utilities(@client machine)/APIs to initate software installtion from SCCM 2012 application catalog?

I'm searching for any utilities / APIs available for SCCM 2012 Application catalog, to initiate a Application installation from a Script(From client machine). Got to know there Client programming is possible, but not able to get good examples. Please help
Regards, Eswar

Hi,
Hope the following sample could help you.
Sample SCCM Application
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 Application Catalog shows ALL advertised to a user independant of the OS they are using

Within SCCM 2007 if a package was to be made available only to the following platforms, it would only show up on those platforms... If a user was using Win XP and had a package meant ONLY for Win7 advertised to them, they would not see it.... It seems as
though in CM12, if a user has advertisements meant for XP, Win7, 64 bit, etc... everything appears in teh application catalog. I also understand that the software center is meant for application publishing and not for regular packages as they were in 2007...
Is there a way to make the packages meant for XP to only appear in the users catalog and NOT show the Win 7 packages?
As we are in the middle of a Win 7 migration, we need to manage this without a lot of work within AD...

Hi,
In Configuration Manager 2012 packages and applications that are made available to users are always displayed in the Application Catalog, the platform requirement is not evaluated until the user actually tries to install the application then the requirements
are evaluated and the installation will not continue if there the requirements doesn't match the plattform.
Software Center will display all packages/programs and applications that are deployed as "available" to devices and not users. User targeted will always show up in the Application Catalog..
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 application catalog items not showing up

I have an SCCM 2012 package which is being deployed to a device collection
The users are not seeing this package appear in the application catalog, nor is it appearing in the software centre
Can we no longer deploy (advertise) to device collections for the users to install when needed?

If it is not appearing in Software Center, then either the deployment policy has not been retrieved by the client, it is not in the target collection, or has been filtered out due to platform restrictions (or some other restriction like that). Or the client
is not able to communicate with the MP, which would be a cause of the first option (the policy has not been retrieved by the client). You'd need to check to ensure that all is working on that end.
Wally Mead

SCCM 2012: application catalog asks for credentials

Hi,
Our application catalog was working fine for weeks. Now suddenly it asks for credentials, the sccm-server is added to trusted sites.
Please advise.
J.
Jan Hoedt

Disable it in client settings. Run a machine policy retrieval on an effected device. Confirm the policy run has complete in the policyevaluator.log. Check IE and confirm it's not trusted. Re-enable the setting and re-run process. Check it works or not.
Also ensure that nothing in GPO is overwriting what you have set in client settings.
Cheers
Paul | sccmentor.wordpress.com

SCCM 2012 SP1 Application catalog website

Architecture:
SCCM 2012 SP1 installed on Windows 2012
Application catalog website issue----->
In SMSAWEBSVCSetup.log we found "IIS component ASP net not installed please install it.
Installlation failed Error Code:125"
whereas we have installed ASP.net already (registering ASp. net not supported please review the MS article: "http://support.microsoft.com/kb/2736284 "
Let know me know what could be the cause.

All depending on how/what order you install the IIS components sometimes it's just to reinstall IIS. To me it sounds like the .Net Framework http-activation and non-activation features are missing.
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

SCCM 2012 application portal: config questions

Hi,
We have setup SCCM 2012 application portal correctly and it's working fine.
However some config questions:
-can we change the name of the configuration portal? Now its servername/CMApplicationCatalog ... what's not userfriendly.
We'd like it to be applicationportal.ourcompany.com. Howto achieve that?
-can we customize layout in a supported way (we could change html pages but after an upgrade of SCCM they would/could be erased)?
-how does flexera (adminstudio?) plugs in into this. I've read this entry
http://helpnet.installshield.com/appportal2014/Content/helplibrary/AP_CreatingCatItemSCCM.htm but what's the big picture here? Anybody using this? What are the advantages?
J.
Jan Hoedt

We want to offer software center for overview of mandatory installs, application catalog for optional software.
On our companies portal, we can then set a link which directs to the application portal. User can then install optional software from there.
My current config works http://applicationportal.ourcompany.com/ goes to the sccm-server but not to the url below.
That would be http://applicationportal.ourcompany.com/CMApplicationCatalog/#/SoftwareLibrary/AppListPageView.xaml
how can I make sure the application portal shows up when this link is opened?
It sounds like you want to perform a URL rewrite?
http://www.iis.net/learn/extensions/url-rewrite-module/creating-rewrite-rules-for-the-url-rewrite-module
You should test this to see if it's what you want - I may have misunderstood your question.
Also, I wouldn't host this module on your AppCatalog server, I'd host the rewrite module elsewhere.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

SCCM 2012 SP1 Beta Site System Roles Installation issues

My apologies if this isn't the correct place to post this, but I didn't see any SCCM 2012 forums to post this. If there is a better place for this post, please direct me to the proper location. In the meantime this is my scenario:
I am currently evaluating SCCM 2012 for our company. I have installed SCCM 2012 SP1 Beta on a test server running Server 2012 and SQL 2012. I am testing its ability to manage Windows 8. The server is a member of our company domain. I have enabled Active
Directory Forest Discovery and CM has detected our forest and domain and set up boundaries automatically.
I am trying to add the Application Catalog Web Service and Website Roles. When I start the wizard I get exclamation marks next to Active Directory forest and domain fields in the wizard. It shows our proper forest and domain names but won't proceed
because it insists that the FQDN for my forest/domain is invalid. If I enter any other forest/domain name (e.g. yahoo.com, google.com, help-me.com) the exclamation marks clear and the wizard will proceed. SC seems to recognize our forest/domain name and
denies it. Adding different suffixes (e.g. .net, .org, .local) changes nothing. I've even flipped our forest-domain name (e.g. "a-b.com" to "b-a.com": we have a "-" in our name) and it STILL denies it. If I add a prefix to the forest/domain name, the
wizard is happy and lets me proceed (e.g. "domain.a-b.com") Did I miss something in initial setup? If this is a bug in the SP1 beta, how do I let anyone know about this? Any help/suggestions would be appreciated. Thanks.

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 R2 - Reporting Services Point installation - "The Datasource does not exist"

Hi all,
Quick bit of background, we have SCCM 2012 R2 installed on a Windows 2012 R2 server. We have the SQL back end off box, configured on a SQL 2012 R2 server running on a Windows Server 2012 R2 cluster. Then there is yet another server which runs the reporting
services. I've just tried installing the Reporting Services Point on the srs server but it doesn't appear to have worked that well. Here's the info i've got back:
A] Site Status > Reporting services point:
SMS_SITE_SYSTEM_STATUS_SUMMERIZER
Site System Status Summarizer detected that the availability of the "Reporting services point" role on server "\\NA-SQLR01.in.tna.local" has changed to Failed.
B] The last message from the SMS_SRS_REPORTING_POINT Component Status is "Site Component Manager successfully installed this component on this site system"
C] Here's the first chunk of info which appears in the srsrp.log file:
SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 4204 (0x106C).
This is a SRS Reporting Point Role as SRSRP registry key exists.
Waiting for changes for 0 minutes
Timed Out...
Set configuration
Check state
Check server health.
Successfully created srsserver SMS_
Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
Reporting Services is running
The DataSource does not exist.
[sqlserver.local\SQL1] [SCCM_XXX] [ConfigMgr_XXX] [sqlreportserver.LOCAL]
[SQL2012] [1] [] [xxx\SCCM2012Server]
Confirmed version [11.0.5058.0] for the Sql Srs Instance.
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
Extract resource language packs if exists
Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
Looking for 'English (United Kingdom)' resources
Looking for 'English' resources
Found resources for 'English'
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
Item, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
Folder, String Parent, Property[] Properties)
(!) SRS root folder was reported missing
STATMSG: ID=7405 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SRS_REPORTING_POINT" SYS=sqlreportserver.LOCAL SITE=P01 PID=2120 TID=4204 GMTDATE=Wed Apr 08 08:56:05.349 2015 ISTR0="ConfigMgr_XXX" ISTR1="sqlreportserver.LOCAL"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
Registry change
Waiting for changes for 1 minutes
After this point i simply get the following info messages looping endlessly:
Set configuration
Check state
Check server health.
Successfully created srsserver
Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
Reporting Services is running
The DataSource does not exist.
[sqlreportserverlocal\SQL1] [SCCM_XXX] [ConfigMgr_P01] [sqlreportserver.LOCAL]
[SQL2012] [1] [] [XX\SCCM2012Server]
[1] [0]
Confirmed version [11.0.5058.0] for the Sql Srs Instance.
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
Extract resource language packs if exists
Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
Looking for 'English (United Kingdom)' resources
Looking for 'English' resources
Found resources for 'English'
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_P01' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
Item, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
Folder, String Parent, Property[] Properties)
(!) SRS root folder was reported missing
Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
Registry change
Waiting for changes for 1 minutes
Has anyone come across this issue before? Must admit, I'm not too hot on the sql side of things so any advice or suggestions would be greatly appreciated. Thanks in advance!

Hi guys, cheers for the swift response.
Garth, i can access SSRS in IE from the SCCM box and it looks a-ok.
Paul, nope can't say I've done any configuration of reporting services - the whole thing has been set up by the database team. Having had a trundle through Reporting Services Configuration Manager, it seems the Database team have set up SSRS in line with
the walkthrough you posted.
Since i'm not seeing the ConfigMgr_XXX folder appear in SSRS I'm wondering if there's something preventing SCCM from being able to create it. The message
"Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions
granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation" sounds like the account SCCM is leveraging to perform the install might not have the right permissions in SSRS. Do i need to delegate specific rights to the NT
AUTHORITY\SYSTEM account in SRS perhaps?

SCCM 2012: Application deployment stuck on 'Waiting to install '

I am setting up many new machines in the last month. But sometimes, when installing applications after rolling out an image. The applications wont install and display the waiting to install message. This mostly last for 1-2 hours but sometimes ever longer.
None of the logs that I have checked seem to give any indication why it will not move forward. Any
thoughts on how to troubleshoot?
For what it's worth, we are setup with a standalone primary site with one distribution point installed. SCCM 2012 SP1.
Thanks in advance.

I see many error messages concerning BITS. This is a part of the DataTransferService.logDTSJob {183F4DC8-B329-4648-B351-D72BE3759642} in state 'DownloadingData'. DataTransferService 22/08/2014 15:26:24 7428 (0x1D04)
CDTSJob::HandleErrors: DTS Job '{183F4DC8-B329-4648-B351-D72BE3759642}' BITS Job '{FC9A9789-B3B1-4804-A59F-22E08B6D6F3A}' under user 'S-1-5-18' OldErrorCount 0 NewErrorCount 1 ErrorCode 0x80190194 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
CDTSJob::HandleErrors: DTS Job ID='{183F4DC8-B329-4648-B351-D72BE3759642}' URL='http://SITE SERVER:80/SMS_MP' ProtType=1 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
CDTSJob::JobError: DTS Job ID='{183F4DC8-B329-4648-B351-D72BE3759642}' BITS Job ID='{FC9A9789-B3B1-4804-A59F-22E08B6D6F3A}' ErrorCode=0x80190194 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
CDTSJob::JobError: DTS Job ID='{183F4DC8-B329-4648-B351-D72BE3759642}' URL='http://SITE SERVER:80/SMS_MP' ProtType=1 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
DTS job {183F4DC8-B329-4648-B351-D72BE3759642} BITS job {FC9A9789-B3B1-4804-A59F-22E08B6D6F3A} failed to download source file http://SITE SERVER:80/SMS_MP/.sms_pol?%7BC2FB5733-0FDF-4907-8617-29B1DC078E83%7D/15.1_00 to destination C:\Windows\CCM\Temp\{F001BFC6-8830-46F3-96B8-9CC08B1A4539}.tmp with error 0x80190194 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
DTS job {183F4DC8-B329-4648-B351-D72BE3759642} BITS job {FC9A9789-B3B1-4804-A59F-22E08B6D6F3A} partially completed 0/1 with error 0x80190194 context 5 DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
DTSJob {183F4DC8-B329-4648-B351-D72BE3759642} in state 'Error'. DataTransferService 22/08/2014 15:26:24 5828 (0x16C4)
DTSJob {183F4DC8-B329-4648-B351-D72BE3759642} in state 'NotifiedComplete'. DataTransferService 22/08/2014 15:26:24 7428 (0x1D04)
DTS job {183F4DC8-B329-4648-B351-D72BE3759642} has completed:
Status : ERROR (0x80070002),
Start time : 08/22/2014 15:26:24,
Completion time : 08/22/2014 15:26:24,
Elapsed time : 0 seconds DataTransferService 22/08/2014 15:26:24 7428 (0x1D04)

Sccm 2012 application deployment fail

Hi Gents
I am attempting to deploy applications to a test machine. The software deployment reaches the test machine in the software center but it fails.
One Application had the status "Past due - will be installed"
The rest just state "Fail" with more information saying:
"The software change returned error code 0x80070005 (-2147024891)
I've been googling away here and iwll continue to do so until i find a resolution but hopefully you guys can help point me in the right direction.
Thanks for the help guys
Lee

Ok i got it to a point where the status of the applications is "waiting to install" so they download fine but not actually installing. I followed this link:
http://777notes.wordpress.com/2012/08/17/sccm-2012-local-content-cach-failed-for-workgroup-machine/ anbd enabled the anonymous checkbox. But still the apps arent installing.

Application Catalog website only accessible from server - clients give 401

Hi,
I have a weird problem, something has gone screwy in the IIS config I think.
I've had the SCCM 2010 R2 application catalog set up and running fine for some time. Recently I installed MBAM (Bitlocker Management) on the SCCM server. MBAM creates it's own website in IIS.
Following installation of MBAM the application catalog isn't fully working.
Clients trying to access http://servername/CMApplicationCatalog get asked repeatedly for credentials before getting a 401 error.
Clients accessing http://SERVER.IP4.ADDRESS/CMApplicationCatalog or http://servername/CMApplicationCatalog from the server see the application catalog without an authentication prompt (although they get an error if they try to install anything)
Browsing to http://localhost/CMApplicationCatalog from the server works properly - no authentication prompt and can install software.
The server is in the list of IE trusted sites. I've tried removing and reinstalling the Application Catalog roles.
Any idea what the problem is here?
Thanks,
Tim

Hi,
Thanks both - I don't see anyhthing strange in the IIS logs.
This is an example of it failing trying to access it by name manually entering details in the authentication box.
10.0.0.100 GET /cMApplicationCatalog/ - 80 - 10.0.0.163 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C;+InfoPath.3;+.NET+CLR+3.5.30729;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.30729)
- 401 2 5 1542 1268
10.0.0.100 GET /cMApplicationCatalog/ - 80 - 10.0.0.163 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C;+InfoPath.3;+.NET+CLR+3.5.30729;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.30729)
- 401 2 5 1542 3
10.0.0.100 GET /cMApplicationCatalog/ - 80 - 10.0.0.163 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C;+InfoPath.3;+.NET+CLR+3.5.30729;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.30729)
- 401 2 5 1542 2
10.0.0.100 CCM_POST /bgb/handler.ashx RequestType=LogIn 80 - 10.0.0.163 ccmhttp - 200 0 0 304 0
10.0.0.100 GET /browserconfig.xml - 80 - 10.0.0.163 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+Win64;+x64;+Trident/7.0;+.NET4.0E;+.NET4.0C;+InfoPath.3;+.NET+CLR+3.5.30729;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.30729)
- 404 0 2 1405 2
10.0.0.100 CCM_POST /bgb/handler.ashx RequestType=Continue 80 - 10.0.0.163 ccmhttp - 200 0 0 1258 4405
This is accessing it by IP, with the transparent authentication working.
10.0.0.100 GET /cMApplicationCatalog/ - 80 - 10.0.0.163 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 401 2 5 1542 1
10.0.0.100 GET /cMApplicationCatalog/ - 80 DOMAIN-LOCAL\USER 10.0.0.163 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 1851 224
10.0.0.100 GET /cMApplicationCatalog/ClientBin/en-GB/en-GB.xap - 80 DOMAIN-LOCAL\USER 10.0.0.163 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko http://10.0.0.100/cMApplicationCatalog/ClientBin/Microsoft.ConfigurationManager.SoftwareCatalog.Portal.xap?ver=5.0.7958.1000
404 0 2 1461 1
10.0.0.100 GET /cMApplicationCatalog/ClientBin/en/en.xap - 80 DOMAIN-LOCAL\USER 10.0.0.163 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko http://10.0.0.100/cMApplicationCatalog/ClientBin/Microsoft.ConfigurationManager.SoftwareCatalog.Portal.xap?ver=5.0.7958.1000
404 0 2 1461 2
10.0.0.100 POST /cMApplicationCatalog/ApplicationViewService.asmx - 80 DOMAIN-LOCAL\USER 10.0.0.163 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko http://10.0.0.100/cMApplicationCatalog/ClientBin/Microsoft.ConfigurationManager.SoftwareCatalog.Portal.xap?ver=5.0.7958.1000
200 0 0 772 429
10.0.0.100 POST /cMApplicationCatalog/ApplicationViewService.asmx - 80 DOMAIN-LOCAL\USER 10.0.0.163 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko http://10.0.0.100/cMApplicationCatalog/ClientBin/Microsoft.ConfigurationManager.SoftwareCatalog.Portal.xap?ver=5.0.7958.1000
200 0 0 2054 404
The difference I can see is that no credentials are showing in the logs in the top example.
I have checked IE settings which appear to be correct. Checking File -> Properties in IE shows the zone as Local intranet | Protected Mode: Off in both cases.
Tim

SCCM 2012 R2 SRS Repointing Point Error 7403

I have install the Reporting services point and I'm receiving error 7403 "The report server service is not running on Reporting Service Point server "SFSCCM1W.SFCCMO.EDU"; start the service to enable reporting."
Server 1: SCCM 2012 R2
Server 2: SQL 2008 R2 CU4

I install the SSRS on the Server running SCCM 2012. So I need to install the SSRS role on the SQL server?
When I browse to the sccm server there are no reports in the browser.
Okay I found the reports on the sql server when I browse to it http://serversql/reports.

Renaming SCCM package application catalog using powershell

I am trying to change the application properties in SCCM Configmgr2012 of over 2000 applications, i need to have the Application Catalog name changed to match the package Name, for doing this i need to design a power shell script, since i am new to
power shell i am not sure what parameters i should use and appropriate functions to be used. if anybody has created something similar please share information on this. Hope i am clear with my question.
Thanks.
Example
Path: Software library-Overview-Application Management-Applications-Adobe
Application-Right click-properties-General Information tab-Name
Adobe_Acrobat X Pro_10.0.0_01
Application-Right click-properties-Application catalog-Localized application name Adobe_Acrobat X Pro -English

That the applications are not in the same folder is not a problem, as you can iterate through all applications without knowing the folder location. The problem is that if you want to script this there needs to be a starting point. Something that's the
same for all application names, so you can script something to get a specific part of the name.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012 Application Catalog Website Point role Status is critical

Similar Messages

Maybe you are looking for