SCCM 2012 Database Replication Monitor Child Site Details Empty

We have a Secondary site for which no data will show up under Monitoring/Database Replication/Replication Status/Child Site. It just states "No items found." as seen in the attached pic. All other secondary sites show various configuration parameters,
etc. on the Child Site tab. What is blocking CM 12 from getting this information for this particular child site? Any ideas? Something firewall or access related maybe?

was there any solution to this? I am having the same issue with the same version of Config Manager.

Similar Messages

SCCM 2012 database issue /question

Hi All
We have 2 recurring errors on our Primary Server (SQL locally installed so a local database).
We have recently updated SCCM 2012 RTM -> SCCM 2012 SP1 (no CU), and we have upgraded SQL 2008 R2 (CU6) to SQL 2008 R2 SP2.
We have exactly the same issue in our TST environment.
Both errors are related to SQL
We checked the SQL server log,
The fist error:
Warning: Failure to calculate super-latch promotion threshold.
I don’t now where to search for this error also google did not provide me with some useful help, I hope someone here can help me with this one.
The second error:
This one has something to do with the stored procedure DRSMsgBuilderActivation
The activated proc '[dbo].[spDRSMsgBuilderActivation]' running on queue 'CM_XXX.dbo.ConfigMgrDRSMsgBuilderQueue' output the following:
'ERROR: Sync of type Configuration Data failed, see previous messages for details.'
And the previous message is the following :
The activated proc '[dbo].[spDRSMsgBuilderActivation]' running on queue 'CM_XXX.dbo.ConfigMgrDRSMsgBuilderQueue' output the following:
'ERROR 3961, Level 16, State 1, Procedure spDRSSendChangesForGroup, Line 1, Message: Snapshot isolation transaction failed in database 'CM_XXX' because the object accessed by the statement has been modified by a DDL statement in another concurrent transaction
since the start of this transaction. It is disallowed because the metadata is not versioned. A concurrent update to metadata can lead to inconsistency if mixed with snapshot isolation.'
I did some checking and there is no problem with the tempdb
Also with this error I hope that someone can help me
Perhaps someone has had the same error
Regards and thx in advance
Johan

hi, one thing I did not understand is, what is the effect on the non technical side of this error?
On the technical side you can find some information in error logs. This it's what I understood.
Is your sccm server working? Or is it not even possible to finish the sccm installation?

SCCM 2012 - Change Distribution Point's Site System Properties Site Code

Hello All,
I'm hoping someone can help me out. Here's what I have and here's what I'm trying to do.
SCCM 2012 R1
Each of our offices has a Windows 7 SP1 Ent PC that is a distribution point for that office's 10-20 machines. A number of these offices and their DPs were setup prior to me setting up a number of Secondary Site Servers. So right now, these DPs' site codes
are the primary site server's. I'd like to change these to one of the Secondary Site Servers.
When I go to the Site System properties of one of these Win7 distribution points, the Site Code is grayed out.
So, the question is, how can I change one of these DPs' site codes?
Thanks in advance to whomever helps!!
Bill

That's a strange reason for using Secondary Sites. How many clients are you managing? Have you good WAN links?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM 2012 client push occurs from site server or from distribution point?

I would like to set up client push in SCCM 2012 and I have a remote site with about 80 workstations that I would like to deploy the clients to using client push, but this remote site is VERY slow, as in less than 3Mbps slow. There is a remote DP located
at this site and I wanted to know if the remote workstations will be hammering my Site Server across the WAN (or MP I guess since the MP role is i installed on the Site Server) to request the client installation, or do the clients just request the client from
the Site Server or MP and then the client downloads to the remote DP and then the workstations install the SCCM 2012 client from the local DP at the remote site?
I just do NOT want the WAN link to become overwhelmed with workstation requests to install the client and have the Site Server have to respond to each and every workstation and download the SCCM 2012 client to each system over this slow WAN link.
How does the client push process actually work?
Thank you

The initial files will come from the primary site server. The rest (the biggest part) will come of the distribution point. See for a good read (even though it's more about secondary sites), this post of Jason:
http://blog.configmgrftw.com/secondary-sites-and-boundary-groups/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

CCMSETUP not updating on SCCM 2012 SP1 CU3/CU4 primary site

I have a SCCM 2012 SP1 CU3 primary site and i can't upgrade the local installed SCCM Client.
The error I get in ccmsetup.log is:
<![LOG[MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002]LOG]!><time="15:44:22.408-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:300">
<![LOG[MSI: Action 15:44:22: Rollback. Rolling back action:]LOG]!><time="15:44:22.562-60" date="02-08-2014" component="ccmsetup" context="" type="0" thread="2496" file="msiutil.cpp:314">
<![LOG[File C:\windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action: CcmRegisterHostingConfiguration.
ErrorMessages:
Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002
]LOG]!><time="15:45:00.798-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:872">
<![LOG[Client installation has failed too many times. Ccmsetup will now abort.]LOG]!><time="15:45:00.830-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7941">
<![LOG[Successfully deleted the ccmsetup service]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2496" file="ccmsetup.cpp:3320">
<![LOG[InstallFromManifest failed 0x80070643]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7086">
<![LOG[CcmSetup failed with error code 0x80070643]LOG]!><time="15:45:05.832-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2324" file="ccmsetup.cpp:10544">
I have this on my primary and secondary servers as well.
Is upgrading to R2 recommended and will that solve this issue ?
When googling to this issue i found that there is a solution for this: remove MP, upgrade Client, install MP.
But this is my primary and secondary and on secondary i am not allowed to remove the MP. It is hardcoded enabled.

Try the following steps to specify the hotfix when installing the client.
1. Open an elevated command prompt.
2. Run a command line similar to the following – if CU3 has already been installed, the MSP file below should be on the site server, in the
\\servername\SMS_SITE\Client\hotfix folder:
\ccmsetup.exe PATCH=\Configmgr2012ac-sp1-kb2882125-x64.msp
Juke Chou
TechNet Community Support

SCCM 2012 Binary Replication - 4GB size limit on Applications?

Hi there,
We have been struggling with updating our Autodesk applications, all of which are 8-12 GB in size. Anytime we update the sources files, SCCM appears to do a FULL update of all source files across our WAN links, instead of a delta replication. I understand
binary replication is enabled by default for Applications, but I was told by a 3rd party vendor that binary replication only works on Applications up to 4GB in size. Anything larger, and it is a full source file update everytime. I have not come across this
in any documentation, and would like to know if this is indeed true.
Thanks for your feedback on this,
Rich

I was able to add a hotfix to our Autodesk C3D 2015 package, and update content this weekend. Binary replication did work as we would expect it to. It created a content TAR file of ~100MB, located in SMSPKGSIG folder, as well as a Content folder in
SCCMContentLib\DataLib of the same size, and only sent that amount of data out to all our sites. I verified it reviewing
It still took over 48 hours for all 60 sites in our environment, and would like to know if that is because the size of the Application is so big (11Gb with 25K files included), that it just takes a long time for SCCM to compare the changes made with the
rest of the Application before updating itself properly? Does that make sense?
Thanks, Rich

SCCM 2012 role out to secondary site - what network links do I need

I'm just doing the SCCM design for a service provider and I'm struggling to understand what connections I need to secondary SCCM sites. There are 10 sites which have about 1000 computers per site. Do I need dedicated links into each
sites and do they need to be VPNs? What do I ask the network manager for?
Louis

Note that secondary sites are *not* gateways for client traffic. Clients must still be able to communicate with an MP in the primary site. Thus, generally secondary sites are a terrible option for segregated networks. Secondary sites are designed for remote
locations where there are no explicit traffic restrictions, just bandwidth limitations.
As for dedicated links, not sure what you mean there. As long as the traffic can traverse the network, per the ports in the link posted by dekac, ConfigMgr (like all applications) doesn't care or even know about how that traffic gets from point A to point
B.
Jason | http://blog.configmgrftw.com | @jasonsandys

SCCM 2012 R2 Replication error

Dear team,
I am getting below error when I ran the Replication analyzer from CAS to Primary. Even checked in the sql server in the mentioned path but the ERRORLOG.6 file is not found.
How to trouble shoot this issue. Please help if any one knows

Dear Team,
When I have ran the replication analyzer from CAS to Primary I am getting below error.Even I checked the in SQL server with same path but the ERRORLOG.6 file is not present.please confirm me how to proceed or trouble shoot further.
4/24/2015 12:19:22 PM: ReplicationLinkAnalysis Error: 1 : Could not find file '\\CAS-SCCM-SQL.CONTOSO.com\G$\MSSQL\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.6'
4/24/2015 12:19:22 PM: ReplicationLinkAnalysis Error: 1 : System.IO.FileNotFoundException: Could not find file '\\CAS-SCCM-SQL.CONTOSO.com\G$\MSSQL\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.6'
File name: '\\CAS-SCCM-SQL.CONTOSO.com\G$\MSSQL\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.6'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath,
Boolean checkHost)
Thanks
Manjunath

SCCM 2012 Content Distribution monitoring

Hi All
I am trying to enable alerts for content distributions on Primary Site Servers
Example: I have 1 PS server and multiple DPs and i am distributing/validating multiple packages from my PS Server to Multiple DPs on schduled basis.
The issue is for some reason if the content distributions/validations fails then i should get email alert (currently i am behind on Console or Offline Reports).
I tried creating custom Even Logs through status message filters which is not working
please help if anyone have already done alerting for failed content distributions
thanks
ananth

Yes, I know this is an old post, I'm just trying to clean them up.
Wouldn't this be better suited for OpsMgr?
http://www.enhansoft.com/

SCCM 2012 Secondary site some client's are scan hardware inventory for more than 30 days

Hi,
In our SCCM 2012 environment we have secondary site configured which connected with 8500 computers, on those 5500 machines scanning hardware inventory and send latest inventory details to Secondary Site Management Point, but remaing 3000 machines are not
sending latest hardware inventory for more than 30 days. I verified clients log found it is generating report on inventory agent.log however it is not available with secondary site Management Point.
Are anyone experienced this issue, please share your thought how to fix this issue.
Thanks in advance.
Madhan

Yes i did verify but the client isn't listed on both log files. Also i couldn't open IIS log because of it size has more than 800MB. currently this site has connected with 8500 machines do you think these many clients are supported by secondary site server.
If you can't open the IIS log then how do you know that the Client's IP is not listed within them?
5000 is the max for a secondary site. You will need to secondary sites at this location.
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigClientNumbers
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Replacing the primary site server, SCCM 2012 R2

Hi,
Setup is currently SCCM 2012 R2 with the primary site server on Windows 2008 R2 on a Hyper-V VM with a separate physical SQL server on 2008 R2 (Windows and SQL). I'm not making any changes to the SQL server at this stage.
I want to completely replace the primary site server VM completely with a brand new VM using Windows 2012 R2.
I was looking to run the SCCM setup and using the Expand an existing stand-alone primary into a hierarchy option but it wont let me do that due to "The site code you specified should not be the same as the primary site's site code".
So seems this Expand an existing option isn't the right option for me?
Do I just add the new server in the SCCM console and add all roles and test and then delete the roles from the old server?
Thanks
EDIT: I have 7 Secondary sites, so I dont want to just start over by doing some sort of backup and restore to the new server unless someone can tell me that wont break my hierarchy.

a backup and recovery is the correct way to do this, but there are a few things you should keep in mind.
Do a backup of your current environment and shut everything down.
install new vm, ensure the configuration is identical, (dns, hostname, etc...); install the same software and pre-requisites,
do a recovery
check the following links on how to do a backup and restore:
http://www.windows-noob.com/forums/index.php?/topic/7403-how-can-i-backup-system-center-2012-configuration-manager/
and
http://technet.microsoft.com/en-us/library/gg712697.aspx

Preloadpackageonsite.exe in sccm 2007 supports sccm 2012 also

HI I have big packages in sccm ,often seeing packages are having issues with replication to child site and DP
Dsame preloadpackageonsite.exe in sccm 2007 supports sccm 2012 also .if supports can any one help to understand sccm 2012
procedure to create package in child sites
ankith

Hi,
No it does not support the new Content management in Configuration Manager 2012, but you can use a builtin tool instead. You export all the content you want to prestage from the console and then on all dp's the utility called extraccontent is placed during
installatioin. Here is how it is done.
http://technet.microsoft.com/en-us/library/hh692395.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 R2 CU3 UPGRADE BROKE REMOTE ADMIN CONSOLE CONNECTIVITY

I installed SCCM 2012 R2 CU3 on my site server but it broke a couple things. I've never had problems with SCCM upgrades before. The admin console works if you log into the site server and run it from there but not when you try it from anywhere else (another
server or a workstation). When you open the admin console on the site server it does have the new version of 5.00.7958.1401. Of the five suggestions that appear when your console won't connect, here's what I know:
1) the remote machines can all ping the site server (call it server 01)
2) we know it's not my account that's a problem as I can open the console on the site server itself
3) This problem happens on server 02, which I put the new admin console on. It also happens with other machines which still have the CU2 console
4) Yes, I'm an admin role, shown by logging into the console on the site server
5) I have another network where everything works. I have not put CU3 on it yet, of course. The WMI permissions on Root, Root\SMS, and Root\SMS\site_ABC are identical on both site servers yet it works on non-upgraded one and not on the upgraded one.
WMI info-I can WMI connect from the site server to these other machines but not WMI connect from the other machines to the site server: not root, SMS, or SMS\site_ABC, nor cimv2, even though the permissions match what is on the working network.
When I launch the console from the site server entries about loading the console loading ok are in SMSAdminUI.log, but when I try to launch the console from other machines no entries are made, even though I changed the SmsAdminSNapIN value to VERBOSE.
I checked DCOM permissions and they are the same on both networks.
Another issue that appeared with this upgrade: I can install the client upgrade to CU3 on other machines but on the site server it fails with "Internal Error 2503" and when you click OK it you get "Internal Error 2502".
Ben JohnsonWY

I'd suspected this WMI problem was only affecting our Server 2012 boxes. I compared RSOPs and noticed the ones having this problem were all under the same OU and getting few GPOs. Our GPO person found a GPO that has somehow become unlinked. He relinked
it. After a gpo update AND a reboot these machines start working again. So CU3 did not cause this WMI after all.
And yes, the CU2 consoles won't connect to a CU3 site server, you have to run the console upgrade.
I fixed the "internal error 2503/2502" by doing this: open task manager, click details, end the explorer task (screen will look blank at first). Click File and select "start new task", enter "explorer.exe' and click the run as admin
button. The msp for CU3 client installed and the screen looks normal again. I only saw this error on the site server and have never seen it before.
Ben JohnsonWY

SCCM 2012 R2 Clients are not retrieving policy

Hi - I know this question has been asked many times before - but I have tried almost everything and a no closer to solving the problem.
Background: Recently a SCCM 2012 SP1 single stand-alone site was upgraded to SCCM 2012 R2. The site is a single stand-alone primary site with a single DP, single MP, using mixed mode
(HTTP). The R2 upgrade ran without any problem and all SCCM components are showing as healthy.
A few test SCCM 2012 SP1 clients were upgraded to the R2 client using client-push.
However the upgraded clients are not retrieving policy from the Management Point. In the Actions Tab of the SCCM client, only Machine Policy Retrieval and User Policy Retrieval are available. But kicking of those actions does not
result in any of the advertised applications, Task Sequences becoming available. Infact Custom Client Settings are not being set either (e.g. Organisation Name in software Center).
I have checked and rechecked the following:
The upgrade of the client completed successfully (checked ccmsetup.log) and the version number went from 5.00.7804.1000 (SP1) to 5.00.7958.1000 (R2).
The MP health in the SCCM console is showing healthy.
The MP access URL's load correctly when run from SCCm client computers
“http://<ServerName>/sms_mp/.sms_aut?mplist” is ok
“http://<ServerName>/sms_mp/.sms_aut?mpcert” is ok
The SCCM clients are assigned to the site correctly – verified via the SCCM client and
ClientLocation.Log
ClientIDManager.Log is not showing any errors
CCMExec.log and ExecMgr.log don't show any advertisements being executed (Execmgr.log is almost empty and only has "Software ditrbution site settings policy does not yet exist on the client). If the client is not yest
registered this is expected behaviour")
The SCCM clients are Approved and NOT Blocked in SCCM
I have attempted to upgrade the SCCM client and also completely removed and reinstalled - and both have the same result (no client policy dpwnloaded)
I have also deleted the above clients completely from SCCM, Run divoery again and pushed the client to the machines again ...with the same result (SCCM client installs, assigns to correct site and then no policy downloaded)
SCCM 2012 Boundaries are configured correctly and assigned to Boundary Groups correctly
The SCCM client’s do not have the firewall enabled
Changed boundary from AD Site to Subnet to IP Address Range: Same issue exists
Uninstalled MP role and reinstalled it: same Issue exists
Tried to connect to SCCm client using 3rd party SCCM Client center tool but cannot connect
??? Not sure what else to try ???

Hi all - sorry for the late response.
We managed to resolve the issue after logging a job with Microsoft Support.
The issue was that the SCCM 2012 R2 upgrade corrupted 2 tables in the SCCM Database - leading to corrupt SCCM client policies.
I am pasting the resolution email from Microsoft below:
(NOTE: This may not be the exact sypmtoms you are experiencing so do not implement this fix assuming it will fix your problem!)
ISSUE:
- All clients are unable to download policies from the server
CAUSE:
- Bad policies in the Database
RESOLUTION:
-Issue with PADbID - Run below query against SCCM DB to verify corrupt entries:
SELECT * FROM
ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
Confirmed Bad policies entries in the SCCM database
Run below query to delete the bad policy after which we resolved the issue:
Delete FROM ResPolicyMap
WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)"

SCCM 2012 DB migration - certificate chain error

Hi all
I am having an issue with migrating an SCCM 2012 database to a new SQL instance that doesn't seem to be uncommon however have had no luck in resolving the issue with what other people have suggested on forums...I have an SCCM 2012 installation which currently
has the site database located on a co-located SQL 2012 instance. I am trying to migrate this database to a different SQL 2012 server with multiple named instances.
I have followed the instructions as per the following article:
http://blogs.technet.com/b/configurationmgr/archive/2013/04/02/how-to-move-the-configmgr-2012-site-database-to-a-new-sql-server.aspx
I have backed up and restored the database to the new instance as per the guide however when running the Configuration Manager Setup Wizard I am getting the following errors:
*** Failed to connect to the SQL Server, connection type: SMS ACCESS. Configuration Manager Setup 22/04/2015 11:51:10 AM 4428 (0x114C)
INFO: SQL Connection failed. Connection: SMS ACCESS, Type: Secure Configuration Manager Setup 22/04/2015 11:51:10 AM 4428 (0x114C)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup 22/04/2015 11:51:13 AM 4428 (0x114C)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 22/04/2015 11:51:13 AM 4428 (0x114C)
*** Failed to connect to the SQL Server, connection type: SMS ACCESS. Configuration Manager Setup 22/04/2015 11:51:13 AM 4428 (0x114C)
The errors will continue to pop up every 3 seconds for a few minutes before timing out and the wizard errors out.
I have tried as others suggested and performed the following with no luck:
- added the SCCM 2012 service account (account that I'm running the Config Manager wizard as) and computer account to the local administrators group on the SQL server
- given the SCCM 2012 service account (account that I'm running the Config Manager wizard as) sysadmin privileges to the SQL instance
- from our internal CA I've issued a certificate for the SQL server and installed it on both the SQL and SCCM server
- tried exporting the SCCM server cert from the SMS_SITE_COMPONENT_MANAGER\Trusted People store and installed it into the Local Computer\Personal certificate store on the SQL server. Even tried installing it into the MSSQL$INST02\Personal store (INST02 being
the name of the SQL instance)
Articles that I've already referenced to try and fix this however without any luck:
https://social.technet.microsoft.com/Forums/en-US/b5e1fc09-1f09-4de2-93c3-c0261fdda238/the-certificate-chain-was-issued-by-an-authority-that-is-not-trusted-when-migrating-to-sql-2012?forum=configmanagerdeployment#a294676b-d51a-4049-82cf-adde14f9711a
https://social.technet.microsoft.com/Forums/en-US/1726fa9d-a97b-41cb-8531-5a5f7191132e/cant-migrate-sccm-database-to-sql-server-2008-r2-cluster-connection-failed-sms-access?forum=configmanagergeneral
Does anyone have any suggestions? The ideal would solution for me would be to remove the need to use certificates for the connection to the SQL backend if that it at all possible.
Cheers
Brady

At this point I recommend that you connect Microsoft support CSS and ask them how to solve this problem.
IMO you shouldn't need the two certs from your internal CA but you will need the two cert from your site server.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 Database Replication Monitor Child Site Details Empty

Similar Messages

Maybe you are looking for