SCCM 2012 R2, KB2910552 after Cumulative update 2

Hi !
I wask noticed for very slow package download at operating system deployment pahse in SCCM 2012R2 CU2. After little digging, I found possible sollution from http://support2.microsoft.com/kb/2910552, but installation failed, since system is updated CU2 after
R2 upgrade.
How should I proceed?
WIM File, application download etc seems fine at 100 or 1000 mbps wire, but any (driver, program) package takes from minutes to hours. No SSL, or antivirus is messing. Drivers and bios updated.
~T

I have noticed only traditional packages (including drivers) kills speed.
Installed R2CU3, updated Boot images, no change.
From running log
.....<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=6]LOG]!><time="17:06:49.617-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSNextInstructionPointer=6]LOG]!><time="17:06:49.633-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:386">
<![LOG[Set a global environment variable _SMSTSInstructionStackString=0 5]LOG]!><time="17:06:49.633-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSInstructionStackString=0 5]LOG]!><time="17:06:49.633-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:414">
<![LOG[Save the current environment block]LOG]!><time="17:06:49.633-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:833">
<![LOG[Start executing an instruction. Instruction name: Dell. Instruction pointer: 6]LOG]!><time="17:06:49.883-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="engine.cxx:116">
<![LOG[Set a global environment variable _SMSTSCurrentActionName=Dell]LOG]!><time="17:06:49.883-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=6]LOG]!><time="17:06:49.883-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Evaluating an AND expression]LOG]!><time="17:06:49.898-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="tsexpreval.cpp:600">
<![LOG[Evaluating a WMI condition expression]LOG]!><time="17:06:49.898-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="tsexpreval.cpp:1879">
<![LOG[Expand a string: root\cimv2]LOG]!><time="17:06:49.898-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="utility.cpp:805">
<![LOG[Expand a string: select * from Win32_ComputerSystem WHERE Manufacturer LIKE "%Dell%"]LOG]!><time="17:06:49.898-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="utility.cpp:805">
<![LOG[The condition for the group (Dell) is evaluated to be true]LOG]!><time="17:06:49.898-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="instruction.cxx:135">
<![LOG[The group (Dell) has been successfully started]LOG]!><time="17:06:49.898-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="instruction.cxx:156">
<![LOG[Set authenticator in transport]LOG]!><time="17:06:49.930-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="libsmsmessaging.cpp:7734">
<![LOG[Updated security on object C:\_SMSTaskSequence.]LOG]!><time="17:06:49.977-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="utils.cpp:1704">
<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=7]LOG]!><time="17:06:49.977-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSNextInstructionPointer=7]LOG]!><time="17:06:49.977-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:386">
<![LOG[Set a global environment variable _SMSTSInstructionStackString=0 5 6]LOG]!><time="17:06:49.977-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSInstructionStackString=0 5 6]LOG]!><time="17:06:49.977-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:414">
<![LOG[Save the current environment block]LOG]!><time="17:06:49.977-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:833">
<![LOG[Start executing an instruction. Instruction name: Run PowerShell Script: COnfigure E5440 BIOS. Instruction pointer: 7]LOG]!><time="17:06:50.273-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="engine.cxx:116">
<![LOG[Set a global environment variable _SMSTSCurrentActionName=Run PowerShell Script: COnfigure E5440 BIOS]LOG]!><time="17:06:50.273-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=7]LOG]!><time="17:06:50.273-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a local default variable OSDRunPowerShellScriptExecutionPolicy]LOG]!><time="17:06:50.273-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:700">
<![LOG[Set a local default variable OSDRunPowerShellScriptPackageID]LOG]!><time="17:06:50.273-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:700">
<![LOG[Set a local default variable OSDRunPowerShellScriptParameters]LOG]!><time="17:06:50.273-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:700">
<![LOG[Set a local default variable OSDRunPowerShellScriptScriptName]LOG]!><time="17:06:50.289-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:700">
<![LOG[Set a global environment variable _SMSTSLogPath=X:\WINDOWS\TEMP\SMSTSLog]LOG]!><time="17:06:50.289-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Evaluating an AND expression]LOG]!><time="17:06:50.289-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="tsexpreval.cpp:600">
<![LOG[Evaluating a WMI condition expression]LOG]!><time="17:06:50.289-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="tsexpreval.cpp:1879">
<![LOG[Expand a string: root\cimv2]LOG]!><time="17:06:50.289-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="utility.cpp:805">
<![LOG[Expand a string: select * from Win32_ComputerSystem
Where Model Like "%E5440%"]LOG]!><time="17:06:50.289-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="utility.cpp:805">
<![LOG[The condition for the action (Run PowerShell Script: COnfigure E5440 BIOS) is evaluated to be true]LOG]!><time="17:06:50.305-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="instruction.cxx:706">
<![LOG[Expand a string: OSDRunPowerShellScript.exe]LOG]!><time="17:06:50.305-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:782">
<![LOG[Expand a string: ]LOG]!><time="17:06:50.305-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:782">
<![LOG[Start executing the command line: OSDRunPowerShellScript.exe]LOG]!><time="17:06:50.305-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="instruction.cxx:722">
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="17:06:50.305-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="instruction.cxx:751">
<![LOG[Expand a string: WinPEandFullOS]LOG]!><time="17:06:50.305-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:782">
<![LOG[Executing command line: OSDRunPowerShellScript.exe]LOG]!><time="17:06:50.305-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="commandline.cpp:827">
<![LOG[[ OSDRunPSScript.exe ]]LOG]!><time="17:06:50.336-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:312">
<![LOG[Running powershell script: 'configure-dellE5440_v3.ps1'(PkgID: S0100201) with execution policy: 'Bypass']LOG]!><time="17:06:50.336-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:342">
<![LOG[The execution scope for running the powershell script is specified not to verify the signature of the scripts. This is unsafe and potentially risk running malicious scripts.]LOG]!><time="17:06:50.336-180" date="10-21-2014" component="RunPowerShellScript" context="" type="2" thread="1952" file="main.cpp:345">
<![LOG[Sending warning status message]LOG]!><time="17:06:50.336-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:347">
<![LOG[Set authenticator in transport]LOG]!><time="17:06:50.336-180" date="10-21-2014" component="RunPowerShellScript" context="" type="0" thread="1952" file="libsmsmessaging.cpp:7734">
<![LOG[Powershell path: x:\Windows\System32\WindowsPowerShell\v1.0\]LOG]!><time="17:06:50.445-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:162">
<![LOG[ResolveSource flags: 0x00000000]LOG]!><time="17:06:50.445-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="resolvesource.cpp:3201">
<![LOG[SMSTSPersistContent: . The content for package S0100201 will be persisted]LOG]!><time="17:06:50.445-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="resolvesource.cpp:3212">
<![LOG[Locations: Multicast = 0, HTTP = 2, SMB = 0.]LOG]!><time="17:06:50.445-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="resolvesource.cpp:2749">
<![LOG[Multicast is not enabled for the package.]LOG]!><time="17:06:50.445-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="resolvesource.cpp:2789">
<![LOG[Trying http://DP1.fqdn.tld/SMS_DP_SMSPKG$/S0100201.]LOG]!><time="17:06:50.445-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="resolvesource.cpp:2870">
<![LOG[Set authenticator in transport]LOG]!><time="17:06:50.445-180" date="10-21-2014" component="RunPowerShellScript" context="" type="0" thread="1952" file="libsmsmessaging.cpp:7734">
<![LOG[WinHttp credentials set]LOG]!><time="17:06:50.445-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="downloadcontent.cpp:796">
<![LOG[List of files to be downloaded]LOG]!><time="17:07:12.800-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="downloadcontent.cpp:350">
<![LOG[Downloaded file from http://DP1.fqdn.tld:80/SMS_DP_SMSPKG$/S0100201/sccm?/backup/configure-delE5440.ps1 to C:\_SMSTaskSequence\Packages\S0100201\backup/configure-delE5440.ps1 ]LOG]!><time="17:07:54.868-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="downloadcontent.cpp:1592">
<![LOG[Executing command line: X:\WINDOWS\system32\cmd.exe /k]LOG]!><time="17:08:01.462-180" date="10-21-2014" component="TSBootShell" context="" type="1" thread="736" file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="17:08:01.462-180" date="10-21-2014" component="TSBootShell" context="" type="1" thread="736" file="bootshell.cpp:942">
<![LOG[Successfully launched command shell.]LOG]!><time="17:08:01.462-180" date="10-21-2014" component="TSBootShell" context="" type="1" thread="736" file="bootshell.cpp:432">
<![LOG[Downloaded file from http://DP1.fqdn.tld:80/SMS_DP_SMSPKG$/S0100201/sccm?/backup/configure-delE5440_v2.ps1 to C:\_SMSTaskSequence\Packages\S0100201\backup/configure-delE5440_v2.ps1 ]LOG]!><time="17:08:15.912-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="downloadcontent.cpp:1592">
<![LOG[Downloaded file from http://DP1.fqdn.tld:80/SMS_DP_SMSPKG$/S0100201/sccm?/cctkcmd.bat to C:\_SMSTaskSequence\Packages\S0100201\cctkcmd.bat ]LOG]!><time="17:08:15.912-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="downloadcontent.cpp:1592">
......<![LOG[Downloaded file from http://DP1.fqdn.tld:80/SMS_DP_SMSPKG$/S0100201/sccm?/X86_64/mxml1.dll to C:\_SMSTaskSequence\Packages\S0100201\X86_64/mxml1.dll ]LOG]!><time="17:29:20.557-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="downloadcontent.cpp:1592">
<![LOG[Downloaded file from http://DP1.fqdn.tld:80/SMS_DP_SMSPKG$/S0100201/sccm?/X86_64/pci.ids to C:\_SMSTaskSequence\Packages\S0100201\X86_64/pci.ids ]LOG]!><time="17:29:41.577-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="downloadcontent.cpp:1592">
<![LOG[Downloaded file from http://DP1.fqdn.tld:80/SMS_DP_SMSPKG$/S0100201/sccm?/X86_64/temp to C:\_SMSTaskSequence\Packages\S0100201\X86_64/temp ]LOG]!><time="17:29:41.593-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="downloadcontent.cpp:1592">
<![LOG[VerifyContentHash: Hash algorithm is 32780]LOG]!><time="17:29:41.608-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="downloadcontent.cpp:1870">
<![LOG[Resolved source to 'C:\_SMSTaskSequence\Packages\S0100201']LOG]!><time="17:29:42.327-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:216">
<![LOG[Working dir 'C:\_SMSTaskSequence\Packages\S0100201']LOG]!><time="17:29:42.327-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:237">
<![LOG[Executing command line: Run Powershell script]LOG]!><time="17:29:42.327-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="commandline.cpp:827">
<![LOG[Found cctk.exe from: C:\_SMSTaskSequence\Packages\S0100201\X86_64]LOG]!><time="17:29:54.968-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:29">
<![LOG[ocation: C:\_SMSTaskSequence\Packages\S0100201\X86_64, .\hapint64.exe ]LOG]!><time="17:29:54.968-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:29">
<![LOG[ttempt to install Dell HAPI ....]LOG]!><time="17:29:54.968-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:29">
<![LOG[Installation seems to be Ok...]LOG]!><time="17:30:00.112-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:29">
<![LOG[API installed.]LOG]!><time="17:30:00.112-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:29">
<![LOG[Found: Dell Command Configure Version 3.0.0 563 (Windows - Aug 20 2014, 16:38:09)]LOG]!><time="17:30:01.651-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:29">
<![LOG[Will log to X:\WINDOWS\TEMP\biossetup.log]LOG]!><time="17:30:01.651-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:29">
<![LOG[egin BIOS configuration ....]LOG]!><time="17:30:01.651-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:29">
<![LOG[onfiguration file: E5440.ini found.]LOG]!><time="17:30:01.651-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:29">
<![LOG[Bios Configuration Complete.]LOG]!><time="17:30:02.680-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:29">
<![LOG[ios password change: ...Changed]LOG]!><time="17:30:03.713-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:29">
<![LOG[rogram exit]LOG]!><time="17:30:03.713-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:29">
<![LOG[Process completed with exit code 0]LOG]!><time="17:30:04.088-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="commandline.cpp:1123">
<![LOG[Command line returned 0]LOG]!><time="17:30:04.088-180" date="10-21-2014" component="RunPowerShellScript" context="" type="1" thread="1952" file="main.cpp:258">
<![LOG[Process completed with exit code 0]LOG]!><time="17:30:04.088-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="commandline.cpp:1123">
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="17:30:04.088-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="instruction.cxx:804">
<![LOG[Successfully completed the action (Run PowerShell Script: COnfigure E5440 BIOS) with the exit win32 code 0]LOG]!><time="17:30:04.104-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="instruction.cxx:830">
<![LOG[Set authenticator in transport]LOG]!><time="17:30:04.119-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="libsmsmessaging.cpp:7734">
<![LOG[Set a global environment variable _SMSTSLastActionRetCode=0]LOG]!><time="17:30:04.197-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSLastActionSucceeded=true]LOG]!><time="17:30:04.197-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Expand a string: %_SMSTSMDataPath%\Logs]LOG]!><time="17:30:04.197-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:782">
<![LOG[Clear local default environment]LOG]!><time="17:30:04.213-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:807">
<![LOG[Updated security on object C:\_SMSTaskSequence.]LOG]!><time="17:30:04.213-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="utils.cpp:1704">
<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=8]LOG]!><time="17:30:04.213-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSNextInstructionPointer=8]LOG]!><time="17:30:04.213-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:386">
<![LOG[Set a global environment variable _SMSTSInstructionStackString=0 5 6]LOG]!><time="17:30:04.229-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSInstructionStackString=0 5 6]LOG]!><time="17:30:04.229-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:414">
<![LOG[Save the current environment block]LOG]!><time="17:30:04.229-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:833">
<![LOG[Start executing an instruction. Instruction name: Dell. Instruction pointer: 8]LOG]!><time="17:30:04.525-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="engine.cxx:116">
<![LOG[Set a global environment variable _SMSTSCurrentActionName=Dell]LOG]!><time="17:30:04.525-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=8]LOG]!><time="17:30:04.525-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[The group (Dell) has been successfully completed]LOG]!><time="17:30:04.525-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="instruction.cxx:344">
<![LOG[Set authenticator in transport]LOG]!><time="17:30:04.557-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="libsmsmessaging.cpp:7734">
<![LOG[Updated security on object C:\_SMSTaskSequence.]LOG]!><time="17:30:04.604-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="utils.cpp:1704">
<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=9]LOG]!><time="17:30:04.604-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSNextInstructionPointer=9]LOG]!><time="17:30:04.604-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:386">
<![LOG[Set a global environment variable _SMSTSInstructionStackString=0 5]LOG]!><time="17:30:04.604-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSInstructionStackString=0 5]LOG]!><time="17:30:04.604-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:414">
<![LOG[Save the current environment block]LOG]!><time="17:30:04.604-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:833">
<![LOG[Start executing an instruction. Instruction name: HP. Instruction pointer: 9]LOG]!><time="17:30:04.854-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="engine.cxx:116">
<![LOG[Set a global environment variable _SMSTSCurrentActionName=HP]LOG]!><time="17:30:04.870-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=9]LOG]!><time="17:30:04.870-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Evaluating an AND expression]LOG]!><time="17:30:04.870-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="tsexpreval.cpp:600">
<![LOG[Evaluating a WMI condition expression]LOG]!><time="17:30:04.870-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="tsexpreval.cpp:1879">
<![LOG[Expand a string: root\cimv2]LOG]!><time="17:30:04.870-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="utility.cpp:805">
<![LOG[Expand a string: select * from Win32_ComputerSystem WHERE Manufacturer LIKE "%Hewlett-Packard%"]LOG]!><time="17:30:04.870-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="utility.cpp:805">
<![LOG[The group (HP) has been skipped because the condition is evaluated to be false]LOG]!><time="17:30:04.885-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="instruction.cxx:118">
<![LOG[Set authenticator in transport]LOG]!><time="17:30:04.916-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="libsmsmessaging.cpp:7734">
<![LOG[Execution of the instruction (HP) has been skipped]LOG]!><time="17:30:04.963-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="engine.cxx:192">
<![LOG[Start executing an instruction. Instruction name: Restart Computer. Instruction pointer: 12]LOG]!><time="17:30:04.963-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="engine.cxx:116">
<![LOG[Set a global environment variable _SMSTSCurrentActionName=Restart Computer]LOG]!><time="17:30:04.979-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=12]LOG]!><time="17:30:04.979-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Set a local default variable SMSRebootMessage]LOG]!><time="17:30:04.979-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:700">
<![LOG[Set a local default variable SMSRebootTimeout]LOG]!><time="17:30:04.979-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:700">
<![LOG[Set a global environment variable _SMSTSLogPath=X:\WINDOWS\TEMP\SMSTSLog]LOG]!><time="17:30:04.979-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:668">
<![LOG[Expand a string: smsboot.exe /target:WinPE]LOG]!><time="17:30:04.979-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:782">
<![LOG[Expand a string: ]LOG]!><time="17:30:04.979-180" date="10-21-2014" component="TSManager" context="" type="0" thread="1564" file="executionenv.cxx:782">
<![LOG[Start executing the command line: smsboot.exe /target:WinPE]LOG]!><time="17:30:04.979-180" date="10-21-2014" component="TSManager" context="" type="1" thread="1564" file="instruction.cxx:722">
Donloading about 16 Mb package takes about 25...30 minutes.
Drivers for this model: 750mb, 1 - 1½ hours.
11 applications (in 2 phases, depending manufacturer/model), less than 5 mb, ¨~ 500 Mb.
~T

Similar Messages

Upgraded SCCM 2012 SP1 to CU5 - Problem updating Endpoint Protection Client (to V4.5.216.0)

We upgraded SCCM SP1 to CU5. We got one primary site, on which we had no problems with running the CU setup. After the upgrade we pushed the new administrator console and client.
SP1 CU5 - console update -> Updated on all administrator users (50 computers)
SP1 CU5- x64 and x86 client update -> Updated on pilot group (50 computers)
No problems so far.
We are having troubles updating the Endpoint Protection Client version. This was V4.1.522.0 before the upgrade. When we enroll a new computer, it receives the new V4.5.216.0, which is the last version.
But we can't update our older clients. We try to deploy the software update (Update for Forefront Endpoint Protection 2010 Client - 4.5.216.0 (KB2952678)) but it doesn't install. After 20 minutes, if I look in the Deployment logs, it says the installation
was successfull; but it isn't, it's still the old version.
Strange thing is, we can upgrade to an inbetween version (Update for Forefront Endpoint Protection 2010 Client - 4.3.215.0 (KB2864366)). Which installs on a test client.
If I look to the cache files of the new EP Client update, and use the UpdateInstall.exe manually, the update does install. Then I see in the logfile EndpointProtectionAgent.log it still refers to the version 4.1.522.0.
EP 4.5.216.0 is installed, version is higher than expected installer version 4.1.522.0. EndpointProtectionAgent 13/01/2015 14:54:00 7808 (0x1E80)
Re-apply EP AM policy. EndpointProtectionAgent 13/01/2015 14:54:00 7808 (0x1E80)
Apply AM Policy. EndpointProtectionAgent 13/01/2015 14:54:00 7808 (0x1E80)
Create Process Command line: "c:\Program Files\Microsoft Security Client\\ConfigSecurityPolicy.exe" "C:\Windows\CCM\EPAMPolicy.xml". EndpointProtectionAgent 13/01/2015 14:54:00 7808 (0x1E80)
Applied the C:\Windows\CCM\EPAMPolicy.xml with ConfigSecurityPolicy.exe successfully. EndpointProtectionAgent 13/01/2015 14:54:02 7808 (0x1E80)
Save new policy state 1 to registry SOFTWARE\Microsoft\CCM\EPAgent\PolicyApplicationState EndpointProtectionAgent 13/01/2015 14:54:02 7808 (0x1E80)
State 1 and ErrorCode 0 and ErrorMsg and PolicyName Antimalware Policy and GroupResolveResultHash D277339FA77A9017801399D96266BAD42DE74F38 is NOT changed. EndpointProtectionAgent 13/01/2015 14:54:02 7808 (0x1E80)
Skip sending state message due to same state message already exists. EndpointProtectionAgent 13/01/2015 14:54:02 7808 (0x1E80)
Firewall provider is installed. EndpointProtectionAgent 13/01/2015 14:54:02 7808 (0x1E80)
Installed firewall provider meet the requirements. EndpointProtectionAgent 13/01/2015 14:54:02 7808 (0x1E80)
This is the WindowsUpdate.log when I try to push the new EP client.
2015-01-14 11:24:13:651 7416 1c44 Handler :::::::::
2015-01-14 11:24:13:651 7416 1c44 Handler : Updates to install = 1
2015-01-14 11:24:21:716 7416 1c44 Handler : WARNING: Command line install completed. Return code = 0x8004ff25, Result = Failed, Reboot required = false
2015-01-14 11:24:21:716 7416 1c44 Handler : WARNING: Exit code = 0x8024200B
2015-01-14 11:24:21:716 7416 1c44 Handler :::::::::
2015-01-14 11:24:21:716 7416 1c44 Handler :: END :: Handler: Command Line Install
2015-01-14 11:24:21:732 7416 1c44 Handler :::::::::::::
2015-01-14 11:24:21:794 1096 c18 Agent *********
2015-01-14 11:24:21:794 1096 edc AU Can not perform non-interactive scan if AU is interactive-only
2015-01-14 11:24:21:794 1096 c18 Agent ** END ** Agent: Installing updates [CallerId = CcmExec]
2015-01-14 11:24:21:794 1096 c18 Agent *************
2015-01-14 11:24:21:794 2296 fac COMAPI >>-- RESUMED -- COMAPI: Install [ClientId = CcmExec]
2015-01-14 11:24:21:794 2296 fac COMAPI - Install call complete (succeeded = 0, succeeded with errors = 0, failed = 1, unaccounted = 0)
2015-01-14 11:24:21:794 2296 fac COMAPI - Reboot required = No
2015-01-14 11:24:21:794 2296 fac COMAPI - WARNING: Exit code = 0x00000000; Call error code = 0x80240022
2015-01-14 11:24:21:794 2296 fac COMAPI ---------
2015-01-14 11:24:21:794 2296 fac COMAPI -- END -- COMAPI: Install [ClientId = CcmExec]
2015-01-14 11:24:21:794 2296 fac COMAPI -------------
2015-01-14 11:24:21:794 1096 1620 AU Can not perform non-interactive scan if AU is interactive-only
2015-01-14 11:24:26:739 1096 1424 Report REPORT EVENT: {ED287668-4BEF-46FD-BB57-CA17680E5D3B} 2015-01-14 11:24:21:732+0100 1 182 101 {A90C3005-7B59-4268-8B11-12D9BE5C8EA0} 201 80070643 CcmExec Failure Content Install Installation Failure: Windows failed to install the following update with error 0x80070643: Update for System Center Endpoint Protection 2012 Client - 4.5.216.0 (KB2952678).
2015-01-14 11:24:27:207 1096 1424 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-01-14 11:24:27:207 1096 1424 Report WER Report sent: 7.5.7601.17514 0x80070643 A90C3005-7B59-4268-8B11-12D9BE5C8EA0 Install 101 Managed
2015-01-14 11:24:27:207 1096 1424 Report CWERReporter finishing event handling. (00000000)
Thanks in advance!

Hello,
According to
kb2952678:
To apply this update, you must have one of the following installed:
System Center 2012 R2 Configuration Manager Cumulative Update 4 for System Center 2012
Configuration Manager Service Pack
Service Pack 2 for System Center Configuration Manager 2007 and Update Rollup 1 for
Forefront Endpoint Protection 2010
Do you have Update Rollup 1 for Forefront Endpoint Protection 2010?
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCCM 2012 SP1 errors when downloading updates

Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules.
The Environment is:
Server 2008 R2
SCCM 2012 SP1 CU2 (Upgraded from SCCM 2012 CU2)
I created an Automatic Deployment Rule for Adobe Flash. Since I was having the same issue with Adobe Reader, when I published via SCUP to WSUS I chose not to sign the updates.
After publishing to WSUS I then sync SCCM, I see the updates and then in the ADR I had it download the updates and I see this error:
Authentication of file C:\Windows\TEMP\CABDEC5.tmp failed, error 0x800b0004 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 3712 (0x0E80)
ERROR: DownloadContentFiles() failed with hr=0x80073633 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download the update from internet. Error = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download ContentID 16845337 for UpdateID 16841530. Error code = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Now the funny thing is if I go to the update itself within update group that Flash is a member I can right click it and choose download and the error doesn't occur.
I observed that the UNC path for ADR Adobe flash, when the rule is ran, is populated with folders that have a name something like 44738297895427890.1 or 423154325378u867234789.1. I have come to realize that those are failed downloads. So for the
heck of it I then right clicked the update itself and chose download and it downloaded without issue. Now I'm guessing that when I chose to download directly from the update maybe the system is getting the update from adobe and not from wherever the rule was
trying to get it from. I then see the .1 removed from the directory name and there are updates within them.
Just for clarity here are the steps I go through from SCUP to Syncing...
Log in to WSUS server
Run SCUP as administrator
Get notified there are updates from Adobe and let SCUP download updates
Find the updates the specify the following publishing options
Full Content
Sign all software updates with a new publishing certificate .... (Is this necessary by the way?)
Then click Next
After that's done I then go to SCCM Manager Console and go to Software Updates and right click to Synchronize them.
After that's done then I run the ADR for Adobe Flash and when it goes to download the updates that's when the error occurs.
What am I missing?
Also, while I wait for help I just recently added the WSUS SCUP certificate to the SCCM server to see if by chance that fixes stuff. If it does then I'll post the results of adding the certificate to the SCCM server.
One other thing, is there a way to delete updates? When I was having this issue in the past, I went in to SCUP I marked the updates as expired and then deleted the updates. Went to SCCM and synchronized the updates and they went from not expired to expired
then I waited, maybe 30 days or so before I could add the updates back in.
Thanks for the help!

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Have you seen the note at the bottom of this page about this error?
http://technet.microsoft.com/en-us/library/bb932193.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 R2 cannot dowload Cummulative Updates

Hello,
I´m trying to download CU3 and CU4 to update my SCCM 2012 R2, I recieved the download link for the hotfix but when I try to open it in my explorer I got this message:
"500 - Internal server error . There isa a problema with the resource you ar looking for, and it cannot be displayed"
Where can I download the CU for SCCM 2012 R2?
I will appreciate any advice.
Thanks.
Manuel
Manuel´s Microsoft Forums Threads

Hi,
You will only need the latest CU, it contains all other other CU's
http://blogs.technet.com/b/configmgrteam/archive/2015/02/02/now-available-cumulative-update-4-for-sc2012-r2-configmgr.aspx
I noticed a few people on the link are also experiencing the 500 internal server error.
Make sure you request the hotfix via email and click the link that comes through.
I just tried it from that link, the request came through and it worked for me.

SCCM 2012 Machine Policy and Software Update Script - Remote Machine

Apologies if this has been answered before as there are so many good posts on this forum. What I am after is a simple VB script that I can stick on a remote machine and then use PSexec to run the .vbs file.
I need to be able to carry out a Start/Control Panel/Configuration Manager (32 bit)/actions Tab
Machine Policy Retrieval and Evaluation Cycle (Initiate)
Software Updates Deployment Evaluation Cycle (Initiate)
This is on SCCM 2012. Also if the VB Script can come back to say if it has been successful or not would be awesome :)
I would like to type something like:
Psexec \"address of machine" SCCM.VBS (where the sccm.vbs is located on the remote machine)
Then for the vbs to carry out the 2 initiations above on the remote machine and then return with "Initiation Complete" or words to that affect.
Thanks

Hi,
I'd highly recommend using some of the available right click tools instead. Here's one example:
http://myitforum.com/myitforumwp/2012/05/07/config-manager-2012-right-click-tools/
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Deploy UDI Windows 10 with SCCM 2012 R2 and MDT 2013 Update 1

Hi,
Trying use "User-Driven Installation" with
SCCM 2012
R2 CU4 and MDT
2013 Update 1 for deploy Windows
10.
Created MDT Task Sequences with
template "Client Task sequence"
and Deployment Method "User-Driven Installation".
When I try to deploy I have error like:
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Part smsts.log
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Expand a string: WinPEandFullOS TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf" TSManager 22.04.2015 11:36:57 1160 (0x0488)
[ smsswd.exe ] InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
PackageID = '' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
BaseVar = '', ContinueOnError='' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
SwdAction = '0001' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Set command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Working dir 'not set' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Executing command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft (R) Windows Script Host Version 5.12 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Copyright (C) Microsoft Corporation. All rights reserved. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft Deployment Toolkit version: 6.3.8216.1000 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the action: Error in the task sequence.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionRetCode=5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 22.04.2015 11:36:57 1160 (0x0488)
Clear local default environment TSManager 22.04.2015 11:36:57 1160 (0x0488)
Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution TSManager 22.04.2015 11:36:57 1160 (0x0488)
The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
The command completed successfully. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
Successfully launched command shell. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)

MDT Updates for Windows 10 Technical Preview Build 10041
Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Пометить как ответ".
http://zalozny.com.ua

WSUS SP2; SCCM 2012 SP1; Sync failed: WSUS update source not found

Hi,
I have installed the Fresh SCCM 2012 SP1 and WSUS 3.0 SP2 + KB2720211 + KB2734608. However, still the Sync is getting failed. This is what I am getting in the wsyncmgr and WCM logs:
wsyncmgr:
Sync failed: WSUS update source not found on site PR1. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=3668 GMTDATE=Fri Jan 09 18:00:00.537 2015 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found
on site PR1. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
1/9/2015 12:00:00 PM 3668 (0x0E54)
WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Supported WSUS version not found SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
STATMSG: ID=6607 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.489 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Remote configuration failed on WSUS Server.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.515 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
I have used the default port numbers 80 and 443 still the sync is failing. Please provide your advise to fix this issue.
Regards,
Malwinder

WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
It's not only a matter of installing the console, but also those hotfixes on a remote server ...
Torsten Meringer | http://www.mssccmfaq.de

How to enable SCCM 2012 clients to get Windows Updates through SSL VPN

I would like my SCCM 2012 client laptops to get Windows Updates through SSL VPN.
I suppose I need to add VPN Subnet in my boundary and boundary group.
What other setting I need to enable?
At this moment, on the 'Software Update Point Component Properties' "Allow intranet-only client connections" radio button is active. Do I neeed to select "Allow both intranet and internet client connections" and Enable SSL communications
for the WSUS server?
or are there something else I need to check?

No, a VPN client is no different than a client connected internally as far as the network is concerned and as far as ConfigMgr is concerned there is no way to explicitly know any different. Internet clients literally are those that connect via the Internet
using IBCM.
Jason | http://blog.configmgrftw.com

Do I need to install Security Hotfix (KB2977319) after Cumulative Update 12 for SQL Server 2008 R2 SP2

HI,
I have installed Cumulative Update 12 for SQL Server 2008 R2 SP2 on my SharePoint instances. This was to resolve a known issue faced with the instance. CU12 helped resolve the issue. My company is rather strict regarding security hotfixes. But I am
not sure if this particular hotfix [Security Hotfix (KB2977319)] is required if the instance has CU12 applied.
Tested this on a Lab server, the installation did run fine, the summary log also stated that the KB is applied. But the Build Number did not change. Hence the doubt.
Overall summary:
Final result:                  Passed
Exit code (Decimal):           0
Exit message:                  Passed
Start time:                    2014-09-06 10:31:21
End time:                      2014-09-06 10:55:49
Requested action:              Patch
Instance SPNTSQLTRN overall summary:
Final result:                  Passed
Exit code (Decimal):           0
Exit message:                  Passed
Start time:                    2014-09-06 10:48:08
End time:                      2014-09-06 10:55:45
Requested action:              Patch
Package properties:
Description:                   SQL Server Database Services 2008 R2
ProductName:                   SQL2008
Type:                          RTM
Version:                       10
SPLevel:                       2
KBArticle:                     KB2977319
KBArticleHyperlink:            http://support.microsoft.com/?kbid=2977319
PatchType:                     QFE
AssociatedHotfixBuild:         0
Platform:                      x64
PatchLevel:                    10.52.4321.0
ProductVersion:                10.52.4000.0
GDRReservedRange:              10.50.4001.0:10.50.4199.0;10.50.4200.0:10.50.4250.0
PackageName:                   SQLServer2008-KB2977319-x64.exe
Installation location:         e:\ac2af22d88ee645b5b32b5c178\x64\setup\
Please inform if I need to apply the hotfix on CU12. Thanks in advance.
John S

Yes you must install Security update mentioned in KB 2977319 it is important for SQL Server to be patches with this security update. Without this it could allow an attacker to compromise your system and gain control over it.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

SCCM 2012 - Maintenance Windows Issue with Update Deployment using Task Sequence

Hi Guys,
I have a question for you!!
We use a Task Sequence to deploy "Patch Tuesday" security fix; we use the integrated step "Install Software Update" and the Task Sequence run during Maintenance Windows (1 hour).
We notice that the time remaining is not recalculated on every software update installation occur (http://blogs.technet.com/b/csloyan/archive/2010/10/24/maintenance-window-calculations-explained.aspx);
it's correct?
The formula indicated in the link above is not considered in this type of software update deployment (Install Software Update task sequence step)?
Thanks a lot.
David

Hi,
Any update?
Is the time remaining recalculated after each update is installed when using the Software Update Group directly as Torsten said?
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCCM 2012 OSD Fails After Formatting and Partitioning Disks

Hello,
The problem is that when I deploy the task sequence to a computer, it loads to WindowsPE properly, then continues to formatting the hard disk and partitioning. After it has finished partitioning it then goes to the applying
the operating system portion of the task sequence. Finally it errors out with "...Image has failed with the error code (0x80070002)...". What is left on the WinPE is two log files in the SMSTSLog directory, smsts.log and wpeinit.log. Neither of these
seemed to show anything blatantly obvious to me, but I'm sure there is still some funny things happening.
This is my first time posting to a help forum of any kind so any constructive criticism is very welcome! Thanks for helping in advance, since SCCM has probably been the most challenging software I have had to setup. I
definitely need the help.
Apparently I can't just throw in all of my logs at once, so I shortened the smsts.log and removed the wpeinit.log. So just say if you need them I guess.

It's probably your network access sccount!<o:p></o:p>
"To configure the Network Access Account, open the CM2012 R2 console, click on Administration,
expand Overview, expand Site Configuration,
click Sites, on the top ribbon click Configure
Site Components, click Software Distribution.<o:p></o:p>
Click on the tab Network Access Account,
choose Specify the account that accesses network locations (by default the option is set to Use
the computer account of Configuration Manager client). Click on the orange icon and add the user account that enough permissions to access the content which is required
while deploying Operating System."<o:p></o:p>
This account should have the minimum appropriate permissions on operating system deployment content it needs to access. This account
is important because the computer receiving the operating system does not have a security context it can use to access content on the network.<o:p></o:p>

SCCM 2012 error downloading EXE files updates

Created an Update Group with security updates for Windows 7, from 2014/Jan-Jun
On downloading, every update with NO-EXE files, were successful.
Every update containing EXE files got errors with this message (example with KB2871997):
Error: There was an error adding Software Update Content to the specified package for Security Update for Windows 7 (KB2871997). Check Deployment Package permissions, or the network path to the Package folder.
NOTES:
1. the target folder (to host the update EXE file) is created normally, but results empty
2. it was possible to download the EXE file updates using Internet Explorer to another folder, BUT trying to alternatively download update from this folder (as opposed to download from internet, the standard way), the same errors above result.
Thanks

Thanks, Joyce and Torsten
Got PatchDownloader.log with NO error messages,
BUT target folders result empty and SCCM Console ends operation with the error on my first post.
Last messages on PatchDownloader.log, with NO error messages and a FINAL SUCCESSFULL (?) message:
- Trying to connect to the root\SMS namespace on the <server> machine. Software Updates Patch Downloader 11/09/2014 10:25:30 10964 (0x2AD4)
- Connected to \root\sms\site_001">\\<server>\root\sms\site_001
namespace on the <server> machine. Software Updates Patch Downloader 11/09/2014 10:25:30 10964 (0x2AD4)
- Connected to \Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa.1\ndp40-kb2901110-v2-x86.exe">\\<server>\Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa.1\ndp40-kb2901110-v2-x86.exe
. Software Updates Patch Downloader 11/09/2014 10:25:31 10964 (0x2AD4)
- Contentsource = http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2014/01/ndp40-kb2901110-v2-x86_9e9c5c03aefbf129dda5f03906d920c5b5f2b36f.exe
. Software Updates Patch Downloader 11/09/2014 10:25:31 10964 (0x2AD4)
- Downloading content for ContentID = 16801587, FileName = ndp40-kb2901110-v2-x86.exe. Software Updates Patch Downloader 11/09/2014 10:25:31 10964 (0x2AD4)
- Download http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2014/01/ndp40-kb2901110-v2-x86_9e9c5c03aefbf129dda5f03906d920c5b5f2b36f.exe
in progress: 10 percent complete Software Updates Patch Downloader 11/09/2014 10:25:32 10320 (0x2850)
- idem: 20, 30, 40, 50, 60, 70, 80, 90 percent complete Software Updates Patch Downloader
- Download http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2014/01/ndp40-kb2901110-v2-x86_9e9c5c03aefbf129dda5f03906d920c5b5f2b36f.exe
to C:\Users\ADM~1.FRA\AppData\Local\Temp\1\CAB88B6.tmp returns 0 Software Updates Patch Downloader 11/09/2014 10:25:37 10320 (0x2850)
- Successfully moved C:\Users\ADM~1.FRA\AppData\Local\Temp\1\CAB88B6.tmp to
\Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa.1">\\<server>\Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa.1
to \Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa.1">\\<server>\Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa.1
to <a href="file://\\\Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa">\\<server>\Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa Software Updates Patch Downloader 11/09/2014 10:25:38 10964
(0x2AD4)

SCCM 2012 SP1 Distribution points not updating

The package that holds my MS updates is not updating on my distribution points ever since I upgraded to SP1. If I remove the package from the distribution points and then add it back it will work fine. This is happening to me every I add updates to this
package. Below is part of the smsdpprov.log file from one of my distro points.
[C90][Thu 02/14/2013 11:03:51]:Content 'f16906f8-d1d4-44df-8cf7-35dd7428893a' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:03:55]:Content '1ebc4751-063f-46dd-a7ae-096cce3545dc' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:03:56]:Content 'b2903470-59e0-4d89-a1a5-808b58c9fd4e' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:03:58]:Content 'f058ee07-a66e-4bdf-8a53-7cc30affe333' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:00]:Content '03546ec3-2613-46ce-bf0c-a6064149f2c6' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:03]:Content '7492e432-b69c-478c-8c7b-7c2396302eb4' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:05]:Content '995a1a82-6d7c-4fb6-9e1b-8cfac070b787' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:06]:Content 'a0a2a75d-beab-49ca-96e5-e03afa98dc8f' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:08]:Content '21061204-1d54-4262-bc90-cf5922191940' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:11]:Content 'ce9e07ad-1467-4da5-bf03-8c7013743d34' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:14]:MoveFile failed for \\?\C:\SCCMContentLib\DataLib\6178f7ae-a640-4e04-a851-abd13239a50f.ENS00006.temp to \\?\C:\SCCMContentLib\DataLib\6178f7ae-a640-4e04-a851-abd13239a50f
[C90][Thu 02/14/2013 11:04:14]:FileRename failed; 0x80070005
[C90][Thu 02/14/2013 11:04:14]:CContentDefinition::Finalize failed; 0x80070005
[C90][Thu 02/14/2013 11:04:14]:Failed to finalize content '6178f7ae-a640-4e04-a851-abd13239a50f' for package 'ENS00006'. Error code: 0X80070005

I've got the same issue. When I look at the smsdpprov.log on the distribution point, this is what I see.
[EB0][Thu 10/31/2013 08:39:08]:Content '0a3fe62c-58ce-47c7-b635-e23407515ecb' for package 'ONB0007A' has been added to content library successfully
[EB0][Thu 10/31/2013 08:39:08]:Content '809b4727-78b3-48bd-85ca-f2fdcf668297' for package 'ONB0007A' has been added to content library successfully
[EB0][Thu 10/31/2013 08:39:08]:MoveFile failed for
\\?\E:\SCCMContentLib\DataLib\5263454e-e3de-49e5-a077-48dba0eefe93.ONB0007A.temp to
\\?\E:\SCCMContentLib\DataLib\5263454e-e3de-49e5-a077-48dba0eefe93
[EB0][Thu 10/31/2013 08:39:08]:FileRename failed; 0x800700b7
[EB0][Thu 10/31/2013 08:39:08]:CContentDefinition::Finalize failed; 0x800700b7
[EB0][Thu 10/31/2013 08:39:08]:Failed to finalize content '5263454e-e3de-49e5-a077-48dba0eefe93' for package 'ONB0007A'. Error code: 0X800700B7
If I reboot the DP, then the package gets updated. I'd like to figure out how to make this not happen :)

Exchange Server 2013 restarts frequently after Cumulative Update 3 is installed

Hi All,
In our Environment Exchange Server 2013 CU3 is installed and restarts every alternate days.Below are the details
Event Id : 6008
The previous system shutdown at 03:13:44 on ‎12-‎06-‎2014 was unexpected.
Evend Id : 1001
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000ef (0xfffffa800e9a8080, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 061214-30108-01.
Event 41, Kernal Power
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Can somebody help me through this because it was causing severe to our organization and restarts frequently as well.

Hello,
Try following solutions:
http://support.microsoft.com/kb/2883203/en-us
http://itsalwaysmyproblem.com/2013/08/27/exchange-2013-and-bugcheck-0x000000ef/
Also installing CU5 may be helpful.
Hope it helps,
Adam
www.codetwo.com
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
find the answer faster.

Cannot install SCCM 2012 SP1 CU4

Hi,
I just tried to apply CU4 over one of my SCCM 2012 SP1 CU3 deployments and I receive the following message during the initial verification phase:
Server update status: This update applies to product version 5.0.7804. The installed version on this computer is 5.0.7958.1000. This update is not applicable to this computer.
Console update status: No serviceable configuration manager role was found on the local system.
If I engage the verification phase on this installation for CU2 and CU3 there is no problem at all, so this must be a CU4 package specific error.
Anybody experiencing the same behavior ?

The latest CU that I see for SCCM 2012 SP1 is SP1 Cumulative Update 3, are you sure you are working with the proper file? .
CU4 was released this week:
http://blogs.technet.com/b/configurationmgr/archive/2014/01/29/now-available-cumulative-update-4-for-system-center-2012-configuration-manager-service-pack-1.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

SCCM 2012 R2, KB2910552 after Cumulative update 2

Similar Messages

Maybe you are looking for