SCCM 2012 what setting can be enabled so that no system force users to restart

SCCM 2012 what setting can be enabled in design rather then software distribution method and patching method which will help
to stop systems to restart even though not suppressed during in patching.

That's not possible. When during installation the restart is not suppressed, the system will restart. There is nothing from a ConfigMgr perspective that will prevent that from happening.
If there is a particular system that you want to stop from restarting you could try to prevent that by using the command shutdown -a.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

Document prints in reverse, what setting can I change to correct this?

Document prints in reverse, what setting can I change to correct this? Not a printer problem - documents print in correct order when using other programs. Using Acrobat X Pro on a Mac.

One more place to check. Open a document you'd like to print, then click the 'Printer...' button. Hit 'Yes' to the warning dialog box that comes up. For your specific printer, this might already be enabled. Change the drop-down menu that says 'Layout' to 'Paper Handling'. It could be that the Page Order preference has been changed here too. Just a thought!
-David

What setting can i change to make mozilla stop thinking my netbook is a mobile phone

what setting can i change to make mozilla stop thinking my netbook is a mobile phone. i don't know if i get the correct browser/add ons, etc updates.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
After Resetting, update to Firefox 27, [[Update Firefox to the latest version]]
Did this fix your problems? Please report back to us!
Thank you.

I'm downloading my apps from my desktop, but when i'm downloading apps from my laptop, the apps can't be transfered. what setting could i adjust so that i could transfer my apps from my laptop to my ipod touch4. Thank you very much-ariston

i'm downloading my apps from my desktop, but when i'm downloading apps from my laptop, the apps can't be transfered. what setting could i adjust so that i could transfer my apps from my laptop to my ipod touch4. Thank you very much-ariston

You can only sync to one iTunes Library/one computerbut you can manage music among different computers. See:
Using iPhone, iPad, or iPod with multiple computers
The only way to sync app from the desktop computer is to make that the syncing computer. You can't sync app from more than one iTunes Library/one computer.
To make the desktop computer the syncing computer you have to:
- get all apps and other item on the desktop computer
- Authorize the computer for the iTunes accounts inquestion
- Connect the iPod to the desktop computer and make a backup by right clicking on the iPod under Devices in iTunes and selecting Backup
- Restore the iPod from that backup

Upgrade to SCCM 2012 R2 Failed - Can I Simply Move SCCM Database to Replacement SCCM 2012 R2 System?

I started with SCCM 2012 RTM and attempted an upgrade to SCCM 2012 R2. The upgrade failed and left the the system unusable. I was able to recover the entire system (single server) from backup.
Rather than risk another failed upgrade can I simply build a new server and move the existing SCCM database to a new SCCM 2012 R2 system?

Hi,
Here is an official article talks about Upgrade for your reference.
Planning to Upgrade System Center 2012 Configuration Manager
http://technet.microsoft.com/en-us/library/jj822981.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hi! I just update my apple tv 2nd gen to the new solfware but it only show the itunes icon on the tv and after shows nothing on the tv screen. What i can do to fix that?

Hi! I just update my apple tv 2nd gen to the new solfware but it only show the itunes icon on the tv and after shows nothing on the tv screen. What i can do to fix that?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Can I enable and disable the system speaker under program control

Can I enable and disable the system speaker under program control?
I'm using LabVIEW 2010.
The PC is running Windows XP Pro.
Thank you

A song??? I wouldn't exactly play them a "song" if you get my drift...
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

How do I set one monitor calibration for the whole system and users?

I'm really angry because when I logged into my first default account, My settings where normal, but I logged into my alt account, the settings where all messed up (NO ONE TOUCHED MY COMPUTER, AND THE ACCOUNT HAS A STRONG PASSWORD) The white balance was that slightly blue one. So, I changed it, and logged in to the alt account again to see it was okay. I want to my main account and used screenlock, and noticed on the login screen (I logged out of the account after I saw to see this same thing) it was the light bluer white balance. So I logged in and calibrated AGAIN and it finally when back to the default on the login screen (2:2 or something and native white balance) and my preferences for my accounts (television gamma, and native white balance) I just want it system wide to be:
-2:2 TELEVISION GAMMA
-Native White Gamma
Or at-least the login screen, and my two accounts, and that settings to be the system wide default.

Thanks for helping me make it worse.
First off, if you want help, act like an adult. We're all just other users you're talking to, not Apple employees. Such angry behavior will only ensure that no one will respond to any questions by you in the future.
Second, there's nothing wrong with Kappy's advice. The /Library/ColorSync/Profiles/ folder is accessible by all user accounts. So putting one common monitor profile there and setting it in each account is what you want to do.
What you're seeing is a known issue when switching users without restarting. I don't know if there's ever been a true solution for it.
One of many articles on the subject:
http://www.macosxhints.com/article.php?story=20060103162354164
I know the linked article is about Tiger, but the bug persists through Leopard.

I have a 1and1 email address but when I complete all the setting up info it says that either the imap user name or password is incorrect. I have attempted it many times since carefully putting in the correct info but still same message appears. Any ideas?

I have a 1and1 email address but when I complete all the setting up info it says that either the imap user name or password is incorrect. I have attempted it many times since carefully putting in the correct info but still same message appears. Any ideas?

If this is a Gmail account you might need to unlock by going here: https://accounts.google.com/DisplayUnlockCaptcha.

SCCM 2012 What Ports Do I need to open so DMZ servers can communicate with my SCCM Server?

Hi,
What ports do I need to open in the firewall so my DMZ servers can talk to my SCCM server on the network?
Here are my steps before to make my DMZ servers talk to my SCCM server:
1. On my SCCM 2012 SP1 CU2 I have bounderies installed --> I install SCCM Client on my DMZ server with the appropriate switches --> I go back to my SCCM server to approve the server --> Works
But now my DMZ servers stops getting definition updates from my SCCM server and I was suggested that it is much easier to open ports in DMZ.
Now, could you please tell me what ports should we open to ensure two way communication among servers?
Thanks!

Yes and no. It's a bit muddy at times.
For Internet based clients, putting an Internet-enabled MP in the DMZ is perfectly acceptable because Internet clients will only choose MPs enabled for Internet communication.
For systems in the DMZ, that's where it really gets muddy. There's no perfect way to accomplish this. IMO, DMZ clients should be allowed to go back to the MP/DP in the Intranet with a targeted opening in the DMZ firewall rules that allows them to only go
to the internal MP. That's a security policy question though for your organization.
Another option is to treat the clients in the DMZ as Internet only clients. This way, they will only go to the Internet MP in the DMZ. You do lose some functionality though like Remote Control.
A final way is to actually put an MP/DP in the DMZ and deal with the timeout's that happen when clients try to talk to the MP in the Intranet. Clients will try 5 times to contact that MP before giving up. They try to find a new MP at the following times
(which are not configurable):
- Every 25 hours
- WHen the client detects a network change
- When the client agent starts
Jason | http://blog.configmgrftw.com

SCCM 2012 R2 CU2 Can't Edit WMI Query Code in Report Builder

I first posted this in the SCCM but the issue is not solved so I thought I'd try here in the SQL Reporting forum. Original thread here: http://social.technet.microsoft.com/Forums/en-US/b0a6ca3d-7471-4b49-8447-7403a65c2ec0/sccm-2012-r2-cu2-cant-edit-wmi-query-code-in-sccm-reports?forum=configmanagergeneral
I'll repost info here to make this easier.....
I built a new SCCM 2012 R2 CU2 suite on Server 2012 R2. This also uses SQL 2012 SP1 CU6. This suite has 4 servers: site server, two for WSUS and secondary DPs, and SQL. This problem is true for the built in reports and my custom reports. Our SQL guy has
been helping me a lot but we've gotten nowhere. I can run a report. I can open one in edit mode after it prompts me for credentials. It loads Report Builder 3.0. But when I go to a dataset/query, enter credentials, and try to open it, I get a popup that
says "Unable to connect to data source. 'AutoGen_5C6358F2_yayak..." When I click on details it says "The target principal name is incorrect. A connection was succesfully established with the server, but then an error occurred during the login
process. (SSL Provider, error: 0 -The target principal name is incorrect.)" In SQL Reporting Services Config Manager the paths for Web Service URL is
http://ip.ip.ip.ip:80/ReportServer_SC01 and for Report Manager URL:
http://ip.ip.ip.ip:80/Reports_SC01. A domain account is used to login. This happens when you r-click a dataset and select query to edit the code of a dataset, ie, when query designer tries to open up. It happens
in both Admin Console and when using the Report Manager URL within SQL SSRS. All other functions of using edit mode of a report work fine.
Ben JohnsonWY

When I do that, browse is dimmed out.
But, if I deselect "create a data set" and click "choose an existing dataset in this report..." there is no data connection at the end.
But if I don't use report builder and instead use IE to browse to my ConfigMgr_ABC, I do see the connection at the end: {123...}.
This problem is on a network that is not on the 'net, so it's hard to do screen shots, so I'll reproduce this problem step by step:
I pick a report to edit, it doesn't matter which one.
If I try it in Admin Console, I right-click, Edit the report, it asks me for a login, I login, then I get a popup that says "Cannot continue. The application is improperly formatted. Contact the vendor for assistance. I click the Details button and
get a long set of text but the key part is "Your web browser settings do not allow you to run signed applications." This msg didn't appear before, so something changed, so I will investigate. I think it used to give a SPN error.
If I use IE within report builder and navigate to whatever report, click open, everything works, except, when I click on Dataset0 (the key one I normally need to edit), click query, it prompts me for a login and no matter which one I use, i get a popup that
says "unable to connect to data source 'AutoGen_123...'". If I click details I get "the targe principal name is incorrect. A connection was successfully established with the server, but then an error occurred during the login process. (provider:
SSL Provider 0-The target principal name is incorrect.)
Ben JohnsonWY

SCCM 2012 R2 CU2 Can't Edit WMI Query Code in SCCM Reports

I built a new SCCM 2012 R2 CU2 suite on Server 2012 R2. This also uses SQL 2012 SP1 CU6. This suite has 4 servers: site server, two for WSUS and secondary DPs, and SQL. This problem is true for the built in reports and my custom reports. Our SQL guy has
been helping me a lot but we've gotten nowhere. I can run a report. I can open one in edit mode after it prompts me for credentials. It loads Report Builder 3.0. But when I go to a dataset/query, enter credentials, and try to open it, I get a popup that
says "Unable to connect to data source. 'AutoGen_5C6358F2_yayak..." When I click on details it says "The target principal name is incorrect. A connection was succesfully established with the server, but then an error occurred during the login
process. (SSL Provider, error: 0 -The target principal name is incorrect.)" In SQL Reporting Services Config Manager the paths for Web Service URL is
http://ip.ip.ip.ip:80/ReportServer_SC01 and for Report Manager URL:
http://ip.ip.ip.ip:80/Reports_SC01.
This is one of three problems I'm having a lot of difficulty with on this network. I'm making separate threads for all three.
Ben JohnsonWY

When I do that, browse is dimmed out.
But, if I deselect "create a data set" and click "choose an existing dataset in this report..." there is no data connection at the end.
But if I don't use report builder and instead use IE to browse to my ConfigMgr_ABC, I do see the connection at the end: {123...}.
This problem is on a network that is not on the 'net, so it's hard to do screen shots, so I'll reproduce this problem step by step:
I pick a report to edit, it doesn't matter which one.
If I try it in Admin Console, I right-click, Edit the report, it asks me for a login, I login, then I get a popup that says "Cannot continue. The application is improperly formatted. Contact the vendor for assistance. I click the Details button and
get a long set of text but the key part is "Your web browser settings do not allow you to run signed applications." This msg didn't appear before, so something changed, so I will investigate. I think it used to give a SPN error.
If I use IE within report builder and navigate to whatever report, click open, everything works, except, when I click on Dataset0 (the key one I normally need to edit), click query, it prompts me for a login and no matter which one I use, i get a popup that
says "unable to connect to data source 'AutoGen_123...'". If I click details I get "the targe principal name is incorrect. A connection was successfully established with the server, but then an error occurred during the login process. (provider:
SSL Provider 0-The target principal name is incorrect.)
Ben JohnsonWY

SCCM 2012 R2 PxE can't boot - your pc need to be repired.

Dear All,
These days, I upgraded SCCM 2012 to R2 , after that PxE can't boot , and shows a blue screen that your pc need to be repired, same issue like this:http://www.gerryhampsoncm.blogspot.ie/2013/02/sccm-2012-task-sequence-fails-with-bcd.html
And, i have also re-configed the pxe more times follow by this acticle , and still failed.
And, after I replace the \RemoteInstall\SMSTemp\2014.01.08.12.31.26.01.{xxxxxxxxx}.boot.bcd to \RemoteInstall\Tmp\x86x64{xxxxxxx}.bcd, and the PC can boot to the winpe well. that means the pc using Tmp folder's BCD store
to boot to WinPE, and not using SMSTemp's.
I check the PxE process:http://technet.microsoft.com/en-us/library/cc722358(v=ws.10).aspx
PXEBoot.com downloads Bootmgr.exe and the BCD store, and I think PXEBoot.com should download BCD store from SMSTemp folder, and should not be the Tmp folder.
So, my question is that why te PXEBoot.com download BCD from Tmp folder ? And how can I change it to download BCD from SMSTemp folder. ? I have been getting to crazy about this fucking problem.
Nemo

Reinstalling WDS and the PXE was not the answer, at least not for me, but I dunno about the original poster as he kept quiet.
For now I am trying to get SCCM2012 R2 running as this is the topic for my final projekt.
But I am stuck here, the problem is the same as the original poster mentioned.
Even thougt DHCP options are set to my CM and smsboot\x86\wdsnbp.com, pxe keeps loading boot\... and fails.
Making a copy from smsboot to boot and renaming the file fixes it in a dirty way.
The WDS-service has never been configured manually, after rolling back to a fresh Server and installing CU1 first nothing changed about that (PXE worked at all at least) und reinstalling the living dead out of the roles and features fixes nothing.
The remoteinstall folder gets populated everytime, with the SMS related stuff and the wds related stuff, I guess (boot, SMSboot, ...).
I tried various variations of the start path, TFTP still loads from boot instead smsboot.
The Images have been temporarily replaced with the one from our old site.
I renewed the whole site, this bugs me since 2012 R1 and R2 is the second site too.
I would really appreciate it if someone could help with an working solution.
Let me know if you need some more informations, site is described below.
In case this should get another Thread, let me know.
Thank you guys :)
Hyper-V Environment, Windows Server 2012 R2 Standard on all three Hosts (Gen 2),
Followed mainly the MS TLG for SCCM2012 for this, supported by windows-noob.
Have a nice day.
Little Edit right here: renaming the file only helps with the 89 error thing, but it doesn't help booting the sccm image.

SCCM 2012 R2 Cu1: Can I reinstall the Reporting Services Point role without delete or change the SSRS-DB?

Hi, I have some issue with the reports,
Can I reinstall the SCCM Reporting Services Point role without delete or change the SSRS-DB (just reset the SCCM SSRS function)?
I have saved/backup the custom made reports.
/SaiTech

Yes you can remove and reinstall the Role. I had to do this recently on our SCCM 2012 R2 due to an issue with the reports not loading. Found out that the problem with reports was from the upgrade to R2 from 2012 SP1 and was able to run
a command to re-register the reports with WMI. I actually removed the role, uninstalled reporting services feature from SQL, deleted the report databases, reinstalled the SQL feature, configured the reporting databases again, added the role back, and
ran the following command.
mofcomp "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
This allowed all my reports to register as they should have and run without errors. If you are having similar problems, you may be able to just run that command to get reports running without all the extra work I did. For us we were getting an
invalid Class error in the srsrp.log.
Brian

On Apple TV when I have rented a movie the subtitles do not go away. What setting do I enable to make this go away.

When I rent a movie on Apple TV. The subtitle text displays on every chapter and does not fade away. What setting to I have to use to turn this feature off. Thanks.

Don, if you rent on atv you can only access it on atv.

SCCM 2012 what setting can be enabled so that no system force users to restart

Similar Messages

Maybe you are looking for