SCCM Multicast Error 0x8007002
We recently upgraded our SCCM environment from 2012 SP1 to SCCM 2012 R2 and installed KB2905002 to fix the slow OSD issue.
after the upgrade we are experiencing some issues with multicast. While opening the multicast session we see the error 0x80070002.
In the MCSIsapi.log is see the following lines:
<![LOG[Looking for: E:\SCCMContentLib\DataLib\XXX000E1*]LOG]!><time="09:14:22.239-60" date="03-06-2014" component="McsIsapi" context="" type="1" thread="1864" file="httphandler.cpp:277">
<![LOG[Failed to access the package.]LOG]!><time="09:14:22.239-60" date="03-06-2014" component="McsIsapi" context="" type="3" thread="1864" file="httphandler.cpp:329">
<![LOG[Looking for: E:\SCCMContentLib\DataLib\XXX000E1*]LOG]!><time="11:33:57.308-60" date="03-06-2014" component="McsIsapi" context="" type="1" thread="3172" file="httphandler.cpp:277">
<![LOG[Failed to access the package.]LOG]!><time="11:33:57.308-60" date="03-06-2014" component="McsIsapi" context="" type="3" thread="3172" file="httphandler.cpp:329">
file XXX000E1 is the multicast image.
Anyone seen this before and have a fix for this?
Make sure you are not running into a name resolution issue in WinPE by hitting the "F8" command support once WinPE boots up and run a quick ping test using just the short name (NETBIOS) of the Multicast Distribution Point Server (NOT
THE FQDN) and see if it resolves the IP address of the server properly.
Similar Messages
-
When i start downloading file i have a massage error 0x8007002 and do not download
when i start downloading any type of files i get an error massage
error 0x8007002
and downloading do not start
== This happened ==
Every time Firefox opened
== 4/5/2010i have this problem everytime when i play Farmvilli in facebook
-
ERROR of SCCM: MPDB ERROR - CONNECTION PARAMETERS
We got some SCCM Connection errors like below. It happened when sccm pushes packages out but they fail with Failed bad environment. Any ideas, thanks.
=======================================
MP_PolicyManager 9/15/2010 7:06:54 PM 8812 (0x226C)
CPolicyManagerHandler::HandleMessage(): SetComplete(DISCARD) called. MP_PolicyManager 9/15/2010 7:06:54 PM 8812 (0x226C)
CMPDBConnection::Init(): IDBInitialize::Initialize() failed with 0x80004005 MP_PolicyManager 9/15/2010 7:06:54 PM 8812 (0x226C)
======================================= MP_PolicyManager 9/15/2010 7:06:54 PM 8812 (0x226C)
MPDB ERROR - CONNECTION PARAMETERS
SQL Server Name : SQLServer1
SQL Database Name : SCCM_ABC
Integrated Auth : True
MPDB ERROR - EXTENDED INFORMATION
MPDB Method : Init()
MPDB Method HRESULT : 0x80004005
Error Description : Cannot open database "SCCM_ABC" requested by the login. The login failed.
OLEDB IID : {0C733A8B-2A1C-11CE-ADE5-00AA0044773D}
ProgID : Microsoft OLE DB Provider for SQL Server
MPDB ERROR - INFORMATION FROM DRIVER
SQL Server Name : SQLSERVER1
Native Error no. : 4060
Error State : 1
Class (Severity) : 11
Line number in SP : 1
MP_PolicyManager 9/15/2010 7:06:54 PM 8812 (0x226C)Hi,
For this MP error, could you please browse through MP URL from Client machines Url to check MP is working or not:
http://smsservername/sms_mp/.sms_aut?mplist - if page display MP list, MP is working fine.
http://smsservername/sms_mp/.sms_aut?mpcert - if a longstring appears, MP is working fine.
Did you use a remote database or a local database for you primary site?
Make sure you added your SCCM site server computer account to Local sql connection group.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
SCCM 2012 - Error sending DAV request. HTTP code 401, status 'Unauthorized'
Hi everyone!
I have a SCCM 2012 install with SQL 2008 R2 RU6 on it. All roles on the same server.
Application deployment was working last week and suddently, today, it's not working anymore.
Client fail to download applications. When I see the log "dataTransfertService.log" I got:
<![LOG[Enumerating DTS jobs for logged on user 'S-1-5-21-3498061407-3801314532-3722532443-1799'.]LOG]!><time="16:45:51.388-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="3536" file="dtslogon.cpp:135">
<![LOG[Enumeration of DTS jobs for logged on user 'S-1-5-21-3498061407-3801314532-3722532443-1799' is complete.]LOG]!><time="16:45:51.878-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="3536" file="dtslogon.cpp:151">
<![LOG[Enumerating DTS jobs for helper user 'S-1-5-21-3498061407-3801314532-3722532443-1799'.]LOG]!><time="16:45:51.878-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="3536" file="dtslogon.cpp:154">
<![LOG[Enumeration of DTS jobs for helper user 'S-1-5-21-3498061407-3801314532-3722532443-1799' is complete.]LOG]!><time="16:45:51.939-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="3536" file="dtslogon.cpp:170">
<![LOG[UpdateURLWithTransportSettings(): OLD URL - http://xxx.com/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1]LOG]!><time="16:48:31.738-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="5616" file="ccmutillib.cpp:3083">
<![LOG[UpdateURLWithTransportSettings(): NEW URL - http://xxx.com:80/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1]LOG]!><time="16:48:31.738-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="5616" file="ccmutillib.cpp:3095">
<![LOG[DTSJob {451ACA72-8FCC-4083-B7B5-C4C68D5E5786} created to download from 'http://xxx.com:80/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1' to 'C:\WINDOWS\ccmcache\3f'.]LOG]!><time="16:48:31.816-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="5616" file="datatransferservice.cpp:186">
<![LOG[DTSJob {451ACA72-8FCC-4083-B7B5-C4C68D5E5786} in state 'DownloadingManifest'.]LOG]!><time="16:48:31.816-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="2432" file="dtsjob.h:157">
<![LOG[[CCMHTTP] ERROR: URL=http://xxx.com:80/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1, Port=80, Options=224, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="16:48:32.281-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="ccmhttperror.cpp:291">
<![LOG[Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:4D48BE30-A5BE-40C1-A946-B0773DE7C060";
DateTime = "20120723144832.297000+000";
HostName = "xxx.com";
HRESULT = "0x87d0027e";
ProcessID = 2236;
StatusCode = 401;
ThreadID = 4204;
]LOG]!><time="16:48:32.297-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="event.cpp:729">
<![LOG[Successfully sent location services HTTP failure message.]LOG]!><time="16:48:32.312-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="ccmhttperror.cpp:395">
<![LOG[Error sending DAV request. HTTP code 401, status 'Unauthorized']LOG]!><time="16:48:32.312-120" date="07-23-2012" component="DataTransferService" context="" type="3" thread="4204" file="util.cpp:629">
<![LOG[GetDirectoryList_HTTP('http://xxx.com:80/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1') failed with code 0x80070005.]LOG]!><time="16:48:32.312-120" date="07-23-2012" component="DataTransferService" context="" type="3" thread="4204" file="util.cpp:688">
<![LOG[Job {451ACA72-8FCC-4083-B7B5-C4C68D5E5786} impersonating Network Access Account.]LOG]!><time="16:48:32.825-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="netaccessaccount.cpp:429">
<![LOG[[CCMHTTP] ERROR: URL=http://xxx.com:80/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1, Port=80, Options=224, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="16:48:32.887-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="ccmhttperror.cpp:291">
<![LOG[Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:4D48BE30-A5BE-40C1-A946-B0773DE7C060";
DateTime = "20120723144832.887000+000";
HostName = "xxx.com";
HRESULT = "0x87d0027e";
ProcessID = 2236;
StatusCode = 401;
ThreadID = 4204;
]LOG]!><time="16:48:32.887-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="event.cpp:729">
<![LOG[Successfully sent location services HTTP failure message.]LOG]!><time="16:48:32.902-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="ccmhttperror.cpp:395">
<![LOG[Error sending DAV request. HTTP code 401, status 'Unauthorized']LOG]!><time="16:48:32.902-120" date="07-23-2012" component="DataTransferService" context="" type="3" thread="4204" file="util.cpp:629">
<![LOG[GetDirectoryList_HTTP('http://xxx.com:80/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1') failed with code 0x80070005.]LOG]!><time="16:48:32.902-120" date="07-23-2012" component="DataTransferService" context="" type="3" thread="4204" file="util.cpp:688">
<![LOG[Job {451ACA72-8FCC-4083-B7B5-C4C68D5E5786} reverted impersonation.]LOG]!><time="16:48:32.902-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="netaccessaccount.h:93">
<![LOG[DTSJob {451ACA72-8FCC-4083-B7B5-C4C68D5E5786} in state 'Cancelled'.]LOG]!><time="16:48:33.011-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="5616" file="dtsjob.h:157">
<![LOG[DTSJob {451ACA72-8FCC-4083-B7B5-C4C68D5E5786} cancelled by client.]LOG]!><time="16:48:33.011-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="5616" file="dtsjob.cpp:2771">
I already verified every single permissions, NAA is configured and has correct rights. I really don't understand what has changed...
any suggestion???
Thank you very much!SMS_DP_SMSPKG$ has Windows Authentication Enabled.
IIS Logs:
2012-07-23 15:10:08 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.28.81.79 ccmhttp 200 0 0 339
2012-07-23 15:11:38 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.28.81.52 ccmhttp 200 0 0 38
2012-07-23 15:11:38 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.28.81.52 ccmhttp 200 0 0 166
2012-07-23 15:11:38 10.28.80.98 PROPFIND /SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1 - 80 - 10.28.81.52 SMS+CCM+5.0 401 2 5 1
2012-07-23 15:11:39 10.28.80.98 PROPFIND /SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1 - 80 - 10.28.81.52 SMS+CCM+5.0 401 2 5 0
2012-07-23 15:11:39 10.28.80.98 PROPFIND /SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1 - 80 - 10.28.81.52 SMS+CCM+5.0 401 1 3221225581 11
2012-07-23 15:11:39 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.28.81.52 ccmhttp 200 0 0 384
2012-07-23 15:13:01 fe80::31df:ba5:7c1:caf6%11 GET /SMS_MP/.sms_aut MPLIST 80 - fe80::31df:ba5:7c1:caf6%11 SMS_MP_CONTROL_MANAGER 200 0 0 4
2012-07-23 15:13:11 10.28.80.98 CCM_POST /ccm_system_windowsauth/request - 80 - 10.29.73.101 ccmhttp 401 2 5 6
2012-07-23 15:14:01 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.28.82.72 ccmhttp 200 0 0 23
2012-07-23 15:15:40 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.28.81.52 ccmhttp 200 0 0 348
2012-07-23 15:15:55 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.28.81.79 ccmhttp 200 0 0 363
2012-07-23 15:16:12 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.29.73.101 ccmhttp 200 0 0 393
2012-07-23 15:17:06 10.28.80.98 CCM_POST /ccm_system_windowsauth/request - 80 - 10.28.81.79 ccmhttp 401 2 5 0
In "ContentTransferManager.log" i see that error:
<![LOG[Starting CTM job {1C23F5FF-8ED3-43D2-91ED-169F82A24E89}.]LOG]!><time="17:11:38.999-120" date="07-23-2012" component="ContentTransferManager" context="" type="1" thread="5400" file="ctmjob.cpp:2980">
<![LOG[Created CTM job {1C23F5FF-8ED3-43D2-91ED-169F82A24E89} for user S-1-5-18]LOG]!><time="17:11:39.030-120" date="07-23-2012" component="ContentTransferManager" context="" type="1" thread="5400" file="ctmanager.cpp:487">
<![LOG[Created and Sent Location Request '{996973D0-911C-4929-BE9D-39CB4D759265}' for package Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c]LOG]!><time="17:11:39.092-120" date="07-23-2012" component="ContentTransferManager" context="" type="1" thread="5332"
file="ccmpkglocation.cpp:83">
<![LOG[CTM job {1C23F5FF-8ED3-43D2-91ED-169F82A24E89} entered phase CCM_DOWNLOADSTATUS_DOWNLOADING_DATA]LOG]!><time="17:11:39.092-120" date="07-23-2012" component="ContentTransferManager" context="" type="1" thread="5332" file="ctmjob.cpp:1432">
<![LOG[Queued location request '{996973D0-911C-4929-BE9D-39CB4D759265}' for CTM job '{1C23F5FF-8ED3-43D2-91ED-169F82A24E89}'.]LOG]!><time="17:11:39.139-120" date="07-23-2012" component="ContentTransferManager" context="" type="1" thread="5332" file="ctmjob.cpp:151">
<![LOG[Persisted locations for CTM job {1C23F5FF-8ED3-43D2-91ED-169F82A24E89}:
(LOCAL) <a href="http://xxx.com/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1]LOG]!><time="17:11:39.452-120">http://xxx.com/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1]LOG]!><time="17:11:39.452-120" date="07-23-2012"
component="ContentTransferManager" context="" type="1" thread="5392" file="ctmjob.cpp:1894">
<![LOG[CTM job {1C23F5FF-8ED3-43D2-91ED-169F82A24E89} (corresponding DTS job {D22196C4-A803-42F4-B4FD-6F5FA777A778}) started download from 'http://xxx.com/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1' for full content download.]LOG]!><time="17:11:39.514-120"
date="07-23-2012" component="ContentTransferManager" context="" type="1" thread="5392" file="ctmjob.cpp:413">
<![LOG[CTM job {1C23F5FF-8ED3-43D2-91ED-169F82A24E89} entered phase CCM_DOWNLOADSTATUS_DOWNLOADING_DATA]LOG]!><time="17:11:39.577-120" date="07-23-2012" component="ContentTransferManager" context="" type="1" thread="5188" file="ctmjob.cpp:1432">
<![LOG[CTM job {1C23F5FF-8ED3-43D2-91ED-169F82A24E89} encountered error 0x80070005 during download ('Error processing manifest.')- The error maps to denied access.]LOG]!><time="17:11:40.217-120" date="07-23-2012" component="ContentTransferManager"
context="" type="3" thread="5400" file="ctmjob.cpp:2489"> -
Multicast Error When Starting Managed Servers
Environment: HP-UX 11i, Weblogic 8.1 SP1.
We're getting the following error when we start managed servers in our clustered environment:
<Feb 24, 2004 6:33:12 PM CST> <Error> <Cluster> <BEA-000116> <Failed to join cluster PDICluster at address 2
37.0.0.1 due to: java.net.SocketException: Can't assign requested address.
java.net.SocketException: Can't assign requested address
at java.net.PlainDatagramSocketImpl.join(Native Method)
at java.net.PlainDatagramSocketImpl.join(PlainDatagramSocketImpl.java:134)
at java.net.MulticastSocket.joinGroup(MulticastSocket.java:274)
at weblogic.cluster.FragmentSocket.initializeMulticastSocket(FragmentSocket.java:92)
at weblogic.cluster.FragmentSocket.start(FragmentSocket.java:109)
at weblogic.cluster.MulticastManager.startListening(MulticastManager.java:164)
at weblogic.cluster.ClusterCommunicationService.initialize(ClusterCommunicationService.java:52)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:922)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:664)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:342)
at weblogic.Server.main(Server.java:32)
>
We also get the same error when we try the util.multicastTest application. So far, we've done the following things to troubleshoot this:
1) Different multicast addresses/ports;
2) The util.multicastTest app.
3) We're researching whether or machine or network may be causing this, but since the admin. server and managed servers are running on the same server, I don't see how the network could be causing this.
Can anyone give me any ideas as to what might be going wrong? We've set this up on other machines before with the same OS and same version of Weblogic. So I'm at a loss at the moment as to what might be going wrong.
Thanks in advance for any help...
Brian
Environment: HP-UX 11i, Weblogic 8.1 SP1.
We're getting the following error when we start managed servers in our clustered environment:
<Feb 24, 2004 6:33:12 PM CST> <Error> <Cluster> <BEA-000116> <Failed to join cluster PDICluster at address 2
37.0.0.1 due to: java.net.SocketException: Can't assign requested address.
java.net.SocketException: Can't assign requested address
at java.net.PlainDatagramSocketImpl.join(Native Method)
at java.net.PlainDatagramSocketImpl.join(PlainDatagramSocketImpl.java:134)
at java.net.MulticastSocket.joinGroup(MulticastSocket.java:274)
at weblogic.cluster.FragmentSocket.initializeMulticastSocket(FragmentSocket.java:92)
at weblogic.cluster.FragmentSocket.start(FragmentSocket.java:109)
at weblogic.cluster.MulticastManager.startListening(MulticastManager.java:164)
at weblogic.cluster.ClusterCommunicationService.initialize(ClusterCommunicationService.java:52)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:922)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:664)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:342)
at weblogic.Server.main(Server.java:32)
>
We also get the same error when we try the util.multicastTest application. So far, we've done the following things to troubleshoot this:
1) Different multicast addresses/ports;
2) The util.multicastTest app.
3) We're researching whether or machine or network may be causing this, but since the admin. server and managed servers are running on the same server, I don't see how the network could be causing this.
Can anyone give me any ideas as to what might be going wrong? We've set this up on other machines before with the same OS and same version of Weblogic. So I'm at a loss at the moment as to what might be going wrong.
Thanks in advance for any help...
Brian
-
5508 - Multicast Error Messages - Receive Multicast Queue is full on Controller
I'm starting to see an error creep up that I havn't seen since 2003/2004 on my brand new 5508 controllers. I'm recieving the following from my WCS:
Receive Multicast Queue is full on Controller and then on the controller itself RX Multicast Queue Full. I understand this used to be due to a large influx of ARP requests or CDP packets on older controllers but, this was supposed to be fixed in an update many years ago.
I'm just wondering if anyone else has seen this on their 5508's. These were advertised as having the horsepower to handle our user loads which arn't really that high at 300 users at any given time max. Has anyone seen this?Traditionally, this was a cosmetic error, a the WLC uses the same queue for Multicast, Unicast and Broadcast traffic.
One thing to check is that you aren't trunking all of your VLAN to the WLC, just the ones that support wireless clients.
Steve -
Hi,
We have just updated our machines with AMD motherboards. We used one as
trial, have to update sound card drivers, then we created an image and
could upload and download image from server to this machine. However, when
we tried to use this machine as master to multicast other machines, the
client machines would not start, error: cannot find partition.
What did I do wrong or miss?
Thanks in advance.Jslc0208,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
I need to use the javax.mail.Session class to send mail.
It works on a normal WL server, but not on a clustered server.
On the bottom of my cluster weblogic.properties file I have something like
weblogic.resource.MailSession.weblogic.resource.mail.testSession=sid@address...
When I start a server in the cluster, it gives this error on startup:
[Date]<E><MulticastSocket> Error sending blocked message
java.io.IOException: Class javax.mail.session with code=-1 does not implement Serialiable,
Externalizable, or WLSerializable...(dump originating at weblogic.Server.main(Server.java:55)
Then during each heartbeat I get:
[Date]<E><Cluster>Multicast socket send error: state dump
java.io.IOException: Class javax.mail.Session with code=-1 does not implement Serializable,
Externalizable, or WLSerializable...
Any ideas?
This is a bug in WLS. It should be fixed in the latest service pack that is due out anytime. Or
if it is already out, you check the release notes.
- Prasad
David Mrozek wrote:
> I need to use the javax.mail.Session class to send mail.
> It works on a normal WL server, but not on a clustered server.
>
> On the bottom of my cluster weblogic.properties file I have something like
> weblogic.resource.MailSession.weblogic.resource.mail.testSession=sid@address...
>
> When I start a server in the cluster, it gives this error on startup:
> [Date]<E><MulticastSocket> Error sending blocked message
> java.io.IOException: Class javax.mail.session with code=-1 does not implement Serialiable,
> Externalizable, or WLSerializable...(dump originating at weblogic.Server.main(Server.java:55)
>
> Then during each heartbeat I get:
> [Date]<E><Cluster>Multicast socket send error: state dump
> java.io.IOException: Class javax.mail.Session with code=-1 does not implement Serializable,
> Externalizable, or WLSerializable...
>
> Any ideas?
-
Installing sccm 2012 error -prerequisites failed sql
Hi
While I'm start installing the SCCM 2012 R2 in windows 2008 R2 ,
SQL version : Microsoft SQL Server 2008 (SP3) - 10.0.5500.0 (X64) Sep 21 2011 22:45:45 Copyright (c) 1988-2008 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (VM)
I'm getting the error below , Please advise what is the error below
INFO: Attempting to load resource DLL... $$<Configuration Manager Setup><09-17-2014 16:50:26.223+420><thread=2800 (0xAF0)>
Failed to connect HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL registry key for reading on SQL Server [SCCM2012.DDS.com]. $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
WARNING: failed to retrieve port number for SCCM2012.DDS.com. $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
WARNING: failed to retrieve port number for SCCM2012.DDS.com. $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
INFO: Registered type SCCM2012.DDS.COM MASTER for SCCM2012.DDS.com master $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
INFO: Registered type SMS Master for SCCM2012.DDS.com master $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
INFO: Registered type SCCM2012.DDS.COM CM_CHK for SCCM2012.DDS.com CM_CHK $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
INFO: Registered type SMS ACCESS for SCCM2012.DDS.com CM_CHK $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
INFO: Attempting to load resource DLL... $$<Configuration Manager Setup><09-17-2014 16:50:26.239+420><thread=2800 (0xAF0)>
*** [08001][17][Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied. $$<Configuration Manager Setup><09-17-2014 16:51:29.621+420><thread=2956 (0xB8C)>
*** [01000][2][Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()). $$<Configuration Manager Setup><09-17-2014 16:51:29.621+420><thread=2956 (0xB8C)>
*** Failed to connect to the SQL Server, connection type: SCCM2012.DDS.COM MASTER. $$<Configuration Manager Setup><09-17-2014 16:51:29.621+420><thread=2956 (0xB8C)>
ERROR: Failed to connect to SQL Server 'master' db. $$<Configuration Manager Setup><09-17-2014 16:51:29.621+420><thread=2956 (0xB8C)>
INFO: Prerequisite rules for primary site fresh installation are being run. $$<Configuration Manager Setup><09-17-2014 16:51:29.621+420><thread=2956 (0xB8C)>
INFO: Verifying Configuration Manager Active Directory Schema Extensions. $$<Configuration Manager Setup><09-17-2014 16:51:29.808+420><thread=2956 (0xB8C)>
INFO: Found DS Root:CN=Schema,CN=Configuration,DC=DDS,DC=com~ $$<Configuration Manager Setup><09-17-2014 16:51:29.839+420><thread=2956 (0xB8C)>
INFO: Verifying Configuration Manager Active Directory Domain Function Level. $$<Configuration Manager Setup><09-17-2014 16:51:29.839+420><thread=2956 (0xB8C)>
INFO: Found Domain Function level: 4~ $$<Configuration Manager Setup><09-17-2014 16:51:29.855+420><thread=2956 (0xB8C)>
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)~ $$<Configuration Manager Setup><09-17-2014 16:51:29.870+420><thread=2956 (0xB8C)>
Checking runtime v2.0.50727...~ $$<Configuration Manager Setup><09-17-2014 16:51:29.870+420><thread=2956 (0xB8C)>
Did not find supported version of assembly Microsoft.UpdateServices.Administration.~ $$<Configuration Manager Setup><09-17-2014 16:51:29.886+420><thread=2956 (0xB8C)>
Checking runtime v4.0.30319...~ $$<Configuration Manager Setup><09-17-2014 16:51:29.886+420><thread=2956 (0xB8C)>
Did not find supported version of assembly Microsoft.UpdateServices.Administration.~ $$<Configuration Manager Setup><09-17-2014 16:51:29.886+420><thread=2956 (0xB8C)>
Supported WSUS version not found~ $$<Configuration Manager Setup><09-17-2014 16:51:29.886+420><thread=2956 (0xB8C)>
INFO: Checking Installed SMS componants on:SCCM2012.DDS.com. $$<Configuration Manager Setup><09-17-2014 16:51:29.886+420><thread=2956 (0xB8C)>
CTool::GetServiceAccount : Failed to get Service [MSSQLSERVER] start account on server [SCCM2012.DDS.com]. Win32 Error = 1060. $$<Configuration Manager Setup><09-17-2014 16:51:29.979+420><thread=2956 (0xB8C)>
ERROR: Failed to get sql service account, Server:<SCCM2012.DDS.com>, instance:<>. $$<Configuration Manager Setup><09-17-2014 16:51:29.979+420><thread=2956 (0xB8C)>
INFO: 'User State Migration Tool' component of ADK is installed. $$<Configuration Manager Setup><09-17-2014 16:51:29.995+420><thread=2956 (0xB8C)>
INFO: File C:\Windows\smstsvc_test_4.exe does not exist. No zapping needed. $$<Configuration Manager Setup><09-17-2014 16:51:29.995+420><thread=2956 (0xB8C)>
INFO: test loop count:0. $$<Configuration Manager Setup><09-17-2014 16:51:36.235+420><thread=2956 (0xB8C)>
INFO: smstsvc_test_4 Return result <7> $$<Configuration Manager Setup><09-17-2014 16:51:36.235+420><thread=2956 (0xB8C)>
*** [08001][17][Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied. $$<Configuration Manager Setup><09-17-2014 16:52:38.743+420><thread=2956 (0xB8C)>
*** [01000][2][Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()). $$<Configuration Manager Setup><09-17-2014 16:52:38.743+420><thread=2956 (0xB8C)>
*** Failed to connect to the SQL Server, connection type: SMS Master. $$<Configuration Manager Setup><09-17-2014 16:52:38.743+420><thread=2956 (0xB8C)>
*** [08001][17][Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied. $$<Configuration Manager Setup><09-17-2014 16:53:42.249+420><thread=2956 (0xB8C)>
*** [01000][2][Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()). $$<Configuration Manager Setup><09-17-2014 16:53:42.249+420><thread=2956 (0xB8C)>
*** Failed to connect to the SQL Server, connection type: SMS Master. $$<Configuration Manager Setup><09-17-2014 16:53:42.249+420><thread=2956 (0xB8C)>
*** [08001][17][Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied. $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
*** [01000][2][Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()). $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
*** Failed to connect to the SQL Server, connection type: SMS Master. $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
ERROR: The current user does not have administrative rights on computer: SCCM2012.DDS.com. $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
ERROR: Prerequisite checking stopped on this machine. $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
INFO: Checking Windows Cluster. $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e~ $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
INFO: WMI namespace root\MSCluster not exists on SCCM2012.DDS.com. $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
INFO: 'Windows Deployment Tools' component of ADK is installed. $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
INFO: 'Windows PE' component of ADK is installed. $$<Configuration Manager Setup><09-17-2014 16:54:42.885+420><thread=2956 (0xB8C)>
*** [08001][17][Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied. $$<Configuration Manager Setup><09-17-2014 16:55:46.516+420><thread=2956 (0xB8C)>
*** [01000][2][Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()). $$<Configuration Manager Setup><09-17-2014 16:55:46.516+420><thread=2956 (0xB8C)>
*** Failed to connect to the SQL Server, connection type: TEST_ROLE_ACCESS. $$<Configuration Manager Setup><09-17-2014 16:55:46.516+420><thread=2956 (0xB8C)>
*** [08001][17][Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied. $$<Configuration Manager Setup><09-17-2014 16:56:47.090+420><thread=2956 (0xB8C)>
*** [01000][2][Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()). $$<Configuration Manager Setup><09-17-2014 16:56:47.090+420><thread=2956 (0xB8C)>
*** Failed to connect to the SQL Server, connection type: TEST_ROLE_ACCESS. $$<Configuration Manager Setup><09-17-2014 16:56:47.090+420><thread=2956 (0xB8C)>
INFO: File C:\Windows\smstsvc_test_5.exe does not exist. No zapping needed. $$<Configuration Manager Setup><09-17-2014 16:56:47.090+420><thread=2956 (0xB8C)>
INFO: test loop count:0. $$<Configuration Manager Setup><09-17-2014 16:57:53.186+420><thread=2956 (0xB8C)>
INFO: smstsvc_test_5 Return result <-1> $$<Configuration Manager Setup><09-17-2014 16:57:53.186+420><thread=2956 (0xB8C)>
INFO: Checking Windows Cluster. $$<Configuration Manager Setup><09-17-2014 16:57:55.198+420><thread=2956 (0xB8C)>
CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e~ $$<Configuration Manager Setup><09-17-2014 16:57:55.198+420><thread=2956 (0xB8C)>
INFO: WMI namespace root\MSCluster not exists on SCCM2012.DDS.com. $$<Configuration Manager Setup><09-17-2014 16:57:55.198+420><thread=2956 (0xB8C)>
INFO: File C:\Windows\smstsvc_test_6.exe does not exist. No zapping needed. $$<Configuration Manager Setup><09-17-2014 16:57:55.432+420><thread=2956 (0xB8C)>
INFO: test loop count:0. $$<Configuration Manager Setup><09-17-2014 16:58:00.611+420><thread=2956 (0xB8C)>
INFO: smstsvc_test_6 Return result <0> $$<Configuration Manager Setup><09-17-2014 16:58:00.611+420><thread=2956 (0xB8C)>
INFO: SCCM2012.DDS.com is a 64 bit operating system. $$<Configuration Manager Setup><09-17-2014 16:58:02.639+420><thread=2956 (0xB8C)>
RobertERROR: The current user does not have administrative rights on computer: SCCM2012.DDS.com
So make sure that the user perfoming the installation AND the computer account if the site server is local admin on the remote server plus sysadmin in SQL.
Torsten Meringer | http://www.mssccmfaq.de -
Error Message SCCM 2012 ERROR: Unable to access target machine for request
Should I be concerned with this message, or will it resolve on its own?
---> ERROR: Unable to access target machine for request: "2097153953", machine name: "MININT-NAEAFL", access denied or invalid network path. SMS_CLIENT_CONFIG_MANAGER 4/21/2015 11:34:59 AM 8100 (0x1FA4)
Execute query exec [sp_CP_SetLastErrorCode] 2097153953, 53 SMS_CLIENT_CONFIG_MANAGER 4/21/2015 11:34:59 AM 8100 (0x1FA4)
This machine is nowhere in my AD or SCCM...It was at one time, But I have deleted it. It still appears in the Logs. The CCM.LOG to be Precise
BryanNo, this is nothing to be concerned with. Assuming you have auto-client push enabled, it will try to push the client agent to a resource without the agent every hour for 7 days. Thus, after the 7 day period expires from the last time it was discovered,
it won't try to push to this system anymore.
Jason | http://blog.configmgrftw.com | @jasonsandys -
Wka vs. multicast error logging
I have been moving our caches from multicast to use wka. Along the way It seems as if the wka seting provides less and/or different logging in the jvm error log.
For example, with multicast enabled, I had a jdom error that was correctly being reported in the error log. Once I enabled wka, the error did not appear even though the problem still existed. It was only switching back to multicast that I again saw the error and was able to correct
If this is true, is there a setting in the tangosol-coherence-override.xml file that will provide the same type if logging the multicast settings seem to produce.
regards,
cj willette
systems engineer
ll bean, freeport maineHi CJ.
I wonder if you had a configuration error in the tangosol-coherence-override.xml when you defined the WKA list. As a result you could have the entire cluster configuration using the default settings instead and as a result not seeing your specific cache configuration.
Could you please send the WKA configuration to support at tangosol.com, so we could verify the correctness of the setup.
Regards,
Gene -
I am getting the following error message on my catalyst 6506 switches:
2007 Oct 26 13:41:21 EST -04:00 %MCAST-5-RX_IGMPREPORT: IGMP: Rcvd IGMP Report 01-00-5e-00-00-02 on 3/11
I receive the message on numerous trunk ports and the multicast MAC will vary.
The only info I've found online is that the message is informational only. I am seeing tons of these messages and would like to know if it's normal and what should be done about it.... if anything.This may be a cause of concern . Typically the address range 224.0.x will map to the multicast mac of 01-00-5e-00-00-xx. What the switch is complaining about is that some one is sending an IGMP join for a group that should be used by only control protocols like OSPF , PIM , EIGRP etc. The key is to always use a multicast ip with a non-zero second and 3rd octet so that it never maps to the mac address that falls into a range of control protocols. This problem is due to 32:1 mapping of Multicast ip to mac addresses. What that means is potentially 32 multicast ip addresses could have the same mac address. For example 224.0.0.1 , 225.0.0.1 , 239.0.0.1 will all map to 0100.5e00.0001 . Now even though 225.0.0.1 and 239.0.0.1 have nothing to do with control protocols and should be perfectly fine to be used by users , the mac addres however ends up mapping to a well-known mac address and hence the syslog message that you are seeing . using a multicast ip with non-zero second and 3rd octet will result in multicast ip never mapping to a well known mac address.
Hope this helps.
Thanks
Salman. -
When using multicast in same VLAN as ConfigMgr server is it works fine. When I try to use multicast in other vlan, multicast session starts but fails almost immediately with error 0x80091007.
In problematic VLAN computers might not resolve ConfigMgr server with shortname. Could it cause this problem?Hi,
Any updates?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
SCCM Connector errors out at 29% synchronization
I have successfully integrated AD and SCCM into Service Manager, but the connector I created for SCCM stops at 29% synchronization with errors. I'm not actually sure how to determine what the error is in particular nor can I seem to solve this problem. I
have checked non-information logs this is what came up with relation to SCCM:
Data synchronization failed by Connector - SCCM.Importer.Inventory.SCCMConnector.6395a7bb03f44083bb045a16f119ce83.:Microsoft.EnterpriseManagement.ServiceManager.Connector.Sms.SmsConnector.
Exception type:ConnectorException
Exception message:getCurrentBatch failed . Exception type:DatabaseLayerException
Exception message:Command type:Text
Any suggestions would be greatly appreciated -- thanks.Hi ,
Faced same problem , SCCM connector synchronization fails at 11%
About the environment setup
1. SCCM 2012 R2 CU1
2. SCSM 2012 R2
Event logscontains the below
Inner Exception:
Exception message:Invalid object name 'SCCM_Ext.vex_GS_NETWORK_ADAPTER'..
StackTrace:
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable)
at Microsoft.EnterpriseManagement.ObjectOrientedDatabaseLayer.DatabaseAccessLayer.GetDataSet(DataSetRequest request).
StackTrace:
at Microsoft.EnterpriseManagement.ServiceManager.Connector.SessionManager.DataProvider.throwConnectorException(String method, String message, Object[] values)
at Microsoft.EnterpriseManagement.ServiceManager.Connector.SessionManager.DataProvider.createBatchInfoForRealSource(SessionBase session, Int32 SessionTableId, EnumTableStatus status)
at Microsoft.EnterpriseManagement.ServiceManager.Connector.SessionManager.DataProvider.PrepareBatchInfo(SessionBase session)
at Microsoft.EnterpriseManagement.ServiceManager.Connector.SessionManager.DataProvider.GetNextBatch(IConnectorSession connectorSession, Boolean batchInfoOnly)
at Microsoft.EnterpriseManagement.ServiceManager.Connector.Datacenter.SessionHost.DataSync()
log indicates some sccm object is missing 'SCCM_Ext.vex_GS_NETWORK_ADAPTER'
Any suggestions??? -
SCCM 2012 error downloading EXE files updates
Created an Update Group with security updates for Windows 7, from 2014/Jan-Jun
On downloading, every update with NO-EXE files, were successful.
Every update containing EXE files got errors with this message (example with KB2871997):
Error: There was an error adding Software Update Content to the specified package for Security Update for Windows 7 (KB2871997). Check Deployment Package permissions, or the network path to the Package folder.
NOTES:
1. the target folder (to host the update EXE file) is created normally, but results empty
2. it was possible to download the EXE file updates using Internet Explorer to another folder, BUT trying to alternatively download update from this folder (as opposed to download from internet, the standard way), the same errors above result.
ThanksThanks, Joyce and Torsten
Got PatchDownloader.log with NO error messages,
BUT target folders result empty and SCCM Console ends operation with the error on my first post.
Last messages on PatchDownloader.log, with NO error messages and a FINAL SUCCESSFULL (?) message:
- Trying to connect to the root\SMS namespace on the <server> machine. Software Updates Patch Downloader 11/09/2014 10:25:30 10964 (0x2AD4)
- Connected to \root\sms\site_001">\\<server>\root\sms\site_001
namespace on the <server> machine. Software Updates Patch Downloader 11/09/2014 10:25:30 10964 (0x2AD4)
- Connected to \Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa.1\ndp40-kb2901110-v2-x86.exe">\\<server>\Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa.1\ndp40-kb2901110-v2-x86.exe
. Software Updates Patch Downloader 11/09/2014 10:25:31 10964 (0x2AD4)
- Contentsource = http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2014/01/ndp40-kb2901110-v2-x86_9e9c5c03aefbf129dda5f03906d920c5b5f2b36f.exe
. Software Updates Patch Downloader 11/09/2014 10:25:31 10964 (0x2AD4)
- Downloading content for ContentID = 16801587, FileName = ndp40-kb2901110-v2-x86.exe. Software Updates Patch Downloader 11/09/2014 10:25:31 10964 (0x2AD4)
- Download http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2014/01/ndp40-kb2901110-v2-x86_9e9c5c03aefbf129dda5f03906d920c5b5f2b36f.exe
in progress: 10 percent complete Software Updates Patch Downloader 11/09/2014 10:25:32 10320 (0x2850)
- idem: 20, 30, 40, 50, 60, 70, 80, 90 percent complete Software Updates Patch Downloader
- Download http://wsus.ds.download.windowsupdate.com/msdownload/update/software/secu/2014/01/ndp40-kb2901110-v2-x86_9e9c5c03aefbf129dda5f03906d920c5b5f2b36f.exe
to C:\Users\ADM~1.FRA\AppData\Local\Temp\1\CAB88B6.tmp returns 0 Software Updates Patch Downloader 11/09/2014 10:25:37 10320 (0x2850)
- Successfully moved C:\Users\ADM~1.FRA\AppData\Local\Temp\1\CAB88B6.tmp to
\Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa.1">\\<server>\Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa.1
to \Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa.1">\\<server>\Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa.1
to <a href="file://\\\Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa">\\<server>\Pacotes\Updates_Test\eb266e23-2194-4e96-bdbb-d2da966a6dfa Software Updates Patch Downloader 11/09/2014 10:25:38 10964
(0x2AD4)
Maybe you are looking for
-
Is there a way to be reminded of an entire list, not just individualized items?
Hi there, I'm wondering if there is a way to set a reminder in the Reminders app to complete an entire list, and not just an individualized items? For example, I have a Groceries reminder list and I was wondering if I could set a reminder to get ever
-
Hi Experts, The setup of the a GL accont for tax is: Tax Category = * (All types allowed) Posting without tax allowed. Before posting in FB01 using the GL account auto use NI (a type of tax category). Today posting in FB01 using the
-
Please help! (:
-
I have windows7 64bit. I am not getting any error messages. When I click it, it looks like it's running, but it ends up not opening. I uninstalled and re-installed couple times, but same thing happens everytime. help?
-
Receive error message on login to WIFI
I do hope someone can help. I have had my Playbook for more than a year now and am only now starting to work with it!!! I know, crazy. A couple of months ago I didn't have a problem accessing the WIFI (we were in the US at the time) now back in Ca