SCCM R2 CAS Missing "Add Site Systems Role" menu

Working with SCCM R2 in a lab environment and I'm Stumped.  I expanded my primary site into a hierarchy and on the new CAS I don't have the add site systems role menu when connected to the CAS. 
This is what I see when connected to the primary site:
This is what I see when connected to the CAS:
Logged on as the domain administrator account used to install both roles, full administrator on both sites.  I can't find any documentation that this is a designed change.
Any Ideas?

At this point that's not relevant, I'm not even getting the menu item to start the wizard.  I'm logged in with the account that did the installation yet it's almost like I have view-only permissions. I'm beginning to think there's a trust issue between
my systems so I'm starting over (i.e. applying the snapshots before I installed) and resetting the trust for my CAS system.

Similar Messages

  • "Add Site System Role" is greyed out in the SCCM console

    SCCM 2012 R2 CU3
    Single Primary Site
    Issue where “Add Site System Role” is greyed out in the SCCM console. We can install roles through PowerShell, however in the console we cannot add roles, remove roles, or change the properties of the site server.
    The account we are using is full administrator in SCCM. It was used to install sccm infrastructure.
    Any suggestions
     

    Anything related to these?
    https://social.technet.microsoft.com/Forums/en-US/4226f698-1114-4a62-bc25-705788432955/add-site-system-roles-remove-roles-greyed-out?forum=configmanagergeneral
    https://social.technet.microsoft.com/Forums/en-US/76bb0064-9d5a-4b0e-b955-472fb5e9e833/the-add-site-system-role-is-grey-out-after-deleted-the-cloud-distribution-point?forum=configmanagerdeployment#5347193f-997b-41a6-8011-5320e3dd8a9e

  • Add Site System Roles (Management Point)

    To resolve an issue I was having with the management point role I have removed it.
    I left it for an hour and then restarted the server and the role had been removed. When I tried to re-add the role the option is greyed out. I believe this is due to the Server being the primary site but am finding it hard to get any definitive answer on
    how to re-add the role.
    Currently my site has no management point.
    My question is HOW DO I RE-ADD THE ROLE OF "MANAGEMENT POINT"?
    Will the configuration management setup wizard allow me to do this, whilst retaining the current roles and config?

    I thought it was a permissions issue at first to. Signed into the server with the service account used to install SCCM and also explicitly named my domain account as a local admin despite me being a domain admin. Furthermore, I have access to remove the
    roles from the server and permission to add and remove roles to all other servers.
    Adding role
    In management console Administration>Site Configuration>Servers and Site System Roles
    This bring up the list of servers and when left clicked their roles. I right click on the server in question and the option to "add site system roles" is greyed out as are the sub-options under start and the option to delete.
    Will screen shot in the morning

  • Add site system roles disabled

    SCCM 2012 SP1 R2 , One primary , no CAS
    I added a cloud distribution point for testing and learning. Today I removed the cloud distribution point and deleted my azure subscription as wel..
    After removing the distribution point I noticed that local distribution point on primary is removed too. and When I to site server and right click to add " Add site server roles" . The setting is disabled.
    How to enable this setting back ?
    Thanks

    Then you should call Microsoft support (CSS) to get that fixed (as you need to modify the database in order to get things up and running again).
    Torsten Meringer | http://www.mssccmfaq.de

  • Add site system role through automation, SCCM 2012 Sp1

    hi
    Trying to add a reporting point through powershell or the SDK with no luck.
    Does any out there have any idea how to do this? We are trying to automate the process of everything.
    When adding through powershell its a sucess with the role itself, but when accessing the reporting node the console crashes and the links are missing.
    Any ideas or tips?
    Regards
    Lasse
    shaggys

    This was finally fixed in
    CU3 for SCCM 2012 R2 and I can confirm that it does work with CU4 for SCCM 2012 R2.
    One note is that the cmdlet documentation is not 100% accurate.  For example, the example listed in get-help excludes required parameters.  Also, the parameter descriptions are not descriptive enough without knowing additional information
    about the role/point.  Here is what worked for me:
    Add-CMReportingServicePoint-SiteCode$SiteCode-SiteSystemServerName$SCCMpriFQDN-DatabaseServerName$SCCMpriFQDN-DatabaseName"CM_$SiteCode"-ReportServerInstance$SCCMsqlDatabaseInstanceName -FolderName"ConfigMgr_$SiteCode"-UserName$CMAaccountConfiguredAsSSRSexecutionAccount

  • SCCM and ForeFront Endpoint Protection point site system role

    Thanks for looking at this......I am working with SCCM 2012, and ForeFront Endpoint Protection has been set up as an Endpoint Protection point site system role.  Up to now we just haven't had to mess with it much, it just has worked.  I
    have been busy packaging applications for the eager public. I have one pc that has had the Endpoint client self destruct.  Had to remove it via the control panel.  I next did a machine policy retrieval and evaluation cycle (among others) and sccm
    shows that it is aware that this particular machine needs FEP. It lists it as "To Be Installed".  How long will this take?  I have things set for "as soon as possible".   Am I at the mercy of Sccm?  Also, is there
    a way to force the install?  Thanks for any light you can shed on this!

    This will depend on your SCCM client policy settings to allow SCEP installation outside of maintenance windows (if you have any).
    It will also depend if you are using 2 hour deployment "randomizer" option in your SCCM client policy.
    Lastly, you can install it with BITS that have already been downloaded with SCCM client install.
    c:\windows\ccmsetup\scepintall.exe

  • SCCM Site System Roles - Installation/Configuration chronological order

    Hello folks,
    I have been reading quite a few documents in order to expertise my SCCM knowledge. I wonder is there any best practice that we need to follow while implementing the Site System Roles.. Like 1. SUP, 2. MP, 3. DP? and what makes the difference in doing so?
    Thanks,

    This cannot be answered in a single forums thread because there are too many factors involved (business needs, customer's environment, LAN/WAN setup, budget etc). Adding multiple roles will provide load balancing (kind of) and high availability (also
    kind of). 
    Torsten Meringer | http://www.mssccmfaq.de

  • Site System Roles - Best Practices

    Hi all -
    I was wondering if there wwere any best practice recommendations for how to configure Site System Roles? We had a vendor come onsite and setup our environment and without going into a lot of detail on why, I wasn't able to work with the vendor. I am trying
    to understand why they did certain things after the fact.
    For scoping purposes we have about 12,000 clients, and this how our environment was setup:
    SERVERA - Site Server, Management Point
    SERVERB - Management Point, Software Update Point
    SERVERC - Asset Intelligence Synchronization Point, Application Catalog Web Service Point, Application Catalog Website Point, Fallback Status Point, Software Update Point
    SERVERD - Distribution Point (we will add more DPs later)
    SERVERE - Distribution Point (we will add more DPs later)
    SERVERF - Reporting Services Point
    The rest is dedicated to our SQL cluster.
    I was wondering if this seems like a good setup, and had a few specific questions:
    Our Site Server is also a Management Point. We have a second Management Point as well, but I was curious if that was best practice?
    Should our Fallback Status Point be a Distribution Point?
    I really appreciate any help on this.

    The FSP role has nothing to do with the 'Allow
    fallback source location for content' on the DP.
    http://technet.microsoft.com/en-us/library/gg681976.aspx
    http://blogs.technet.com/b/cmpfekevin/archive/2013/03/05/what-is-fallback-and-what-does-it-mean.aspx
    Benoit Lecours | Blog: System Center Dudes

  • Reporting site system role fails to install

    When I try to install the site system reporting role it shows success but looking at the status is shows critical. The srsrpsetup.log shows the following..
    <01/27/15 10:53:10> ====================================================================
    <01/27/15 10:53:10> SMSSRSRP Setup Started....
    <01/27/15 10:53:10> Parameters: C:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:LOUSYSCNTR01 SMSSRSRP 0
    <01/27/15 10:53:10> Installing Pre Reqs for SMSSRSRP
    <01/27/15 10:53:10>         ======== Installing Pre Reqs for Role SMSSRSRP ========
    <01/27/15 10:53:10> Found 1 Pre Reqs for Role SMSSRSRP
    <01/27/15 10:53:10> Pre Req SqlNativeClient found.
    <01/27/15 10:53:10> SqlNativeClient already installed (Product Code: {3965C9F9-9B9A-4391-AC4B-8388210D3AA0}). Would not install again.
    <01/27/15 10:53:10> Pre Req SqlNativeClient is already installed. Skipping it.
    <01/27/15 10:53:10>         ======== Completed Installation of Pre Reqs for Role SMSSRSRP ========
    <01/27/15 10:53:10> Installing the SMSSRSRP
    <01/27/15 10:53:10> Passed OS version check.
    <01/27/15 10:53:10> .NET Framework 4.0 Full profile is installed.
    <01/27/15 10:53:10> Clean up old files
    <01/27/15 10:53:10> Deleting \\?\C:\Program Files\SMS_SRSRP, FAILED, Win32 Error = 2
    <01/27/15 10:53:10> Cannot delete old installation directory C:\Program Files\SMS_SRSRP. Error Code=2. Installation will continue.
    <01/27/15 10:53:10> No versions of SMSSRSRP are installed.  Installing new SMSSRSRP.
    <01/27/15 10:53:10> Enabling MSI logging.  srsrp.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\srsrpMSI.log
    <01/27/15 10:53:10> Installing C:\Program Files\Microsoft Configuration Manager\bin\x64\srsrp.msi SRSRPINSTALLDIR="C:\Program Files\SMS_SRSRP" SRSRPLANGPACKFLAGS=0
    <01/27/15 10:53:12> srsrp.msi exited with return code: 0
    <01/27/15 10:53:12> Installation was successful.
    <01/27/15 10:53:12> Cannot register C:\Program Files\SMS_SRSRP\srsserver.dll, it doesn't exist
    <01/27/15 10:53:12> Cannot register C:\Program Files\SMS_SRSRP\srsserver.dll, it doesn't exist
    <01/27/15 10:53:12> Cannot register SRSRP interop DLL C:\Program Files\SMS_SRSRP\srsserver.dll. Installation cannot continue.
    <01/27/15 10:53:12> Fatal MSI Error - srsrp.msi could not be installed.
    <01/27/15 10:53:12> ~RoleSetup().

    Do the DLLs exist? Have you temporarily turn off AV and install the RP? what does srsrpMSI.log log say?
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • No authorization to add transaction to role menu

    MODS: IF YOU ARE GOING TO DELETE MY POSTS..AT LEAST EMAIL ME TO LET ME KNOW WHY YOU ARE DELETING THEM SO I CAN RE-WORD IT TO ACCOMMODATE YOUR ISSUE. THIS IS THE THIRD TIME YOU HAVE DELETED ONE OF MY POSTS WITH NO EXPLANATION AND IF THIS FORUM ISNT FOR ASKING QUESTIONS LIKE THIS...THEN WHAT IS IT FOR?
    To the question:
    I am able to do add a transaction to a role in our production environment without issue. Trying to add it in in Development system gives me the following error:
    No authorization to add transaction <transaction name> to role menu.
    When I look at SU53 it tells me that it failed on Authorization Object s_user_tcd Field TCD value Z_RICKTEST
    It then shows me 4 profiles with that auth object and field and a value of PFCG.
    I can run the program Z_RICKTEST with no issue in either system.
    Can anyone shed some light on why this is happening?

    The reject mail contains a link to the forum rules. If you (had) read that you would understand.
    Reason is that you have no basic training, make no effort to read the application documentation and then make changes in production and want to know from us how it works.
    Imagine if everyone did that? Imagine what the systems would all look like?
    These discussion areas are not a substitute for basic training!
    Thread locked!

  • SCCM 2012 SP1 Beta Site System Roles Installation issues

    My apologies if this isn't the correct place to post this, but I didn't see any SCCM 2012 forums to post this. If there is a better place for this post, please direct me to the proper location. In the meantime this is my scenario:
    I am currently evaluating SCCM 2012 for our company. I have installed SCCM 2012 SP1 Beta on a test server running Server 2012 and SQL 2012. I am testing its ability to manage Windows 8. The server is a member of our company domain. I have enabled Active
    Directory Forest Discovery and CM has detected our forest and domain and set up boundaries automatically.
    I am trying to add the Application Catalog Web Service and Website Roles. When I start the wizard I get exclamation marks next to Active Directory forest and domain fields in the wizard. It shows our proper forest and domain names but won't proceed
    because it insists that the FQDN for my forest/domain is invalid. If I enter any other forest/domain name (e.g. yahoo.com, google.com, help-me.com) the exclamation marks clear and the wizard will proceed. SC seems to recognize our forest/domain name and
    denies it. Adding different suffixes (e.g. .net, .org, .local) changes nothing. I've even flipped our forest-domain name (e.g. "a-b.com" to "b-a.com": we have a "-" in our name) and it STILL denies it. If I add a prefix to the forest/domain name, the
    wizard is happy and lets me proceed (e.g. "domain.a-b.com") Did I miss something in initial setup? If this is a bug in the SP1 beta, how do I let anyone know about this? Any help/suggestions would be appreciated. Thanks.

    Since no one has answer this post, I recommend opening  a support case with CSS as they can work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • WSUS with SCCM 2012 - Products Missing, and Best Practices

    Good morning all
    I am integrating SCCM with WSUS, and I have a few questions regarding products.  I've noticed when running through the "Add site system roles wizard" in SCCM 2012 console that when I go to "Products" it does NOT list a few major
    products, such as office 2013, sql server 2013, exchange 2013, etc. 
    Am I missing something? I'm sure I am...what do I need to do? 
    Also, if there are any other gotchas or best practices you all can point me in the right direction as far as managing SCCM / WSUS together i'd be greatly appreciated. 
    Thanks so much!

    Do not use WSUS Console to manage the updates. All you things you can finish is in the SCCM Console. Refer to the link posted by Jason.
    Juke Chou
    TechNet Community Support

  • Log location for the DP having only "Distribution point" and "site system" installed

    Hi
    I have one SCCM DP 2012 server. that have only "Distribution point" and "site system"  role installed.
    Is the log will be generated on primary server?  I am not able to find the log on this server.
    Please help me in this.
    Regards, Shishir Kushawaha "If this thread answered your question, please click on "Mark as Answer"

    HI,
    You will have it in a folder called \SMS_DP\sms\logs, you can also see information about package transfers in the primary site server in the distmgr.log and pkgxfermgr.log files .
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Cannot Remove Failed 2 Site System Servers

    Good Afternoon All - 
    While setting up a fairly new SCCM (2012 Sp1 CU1) environment, there were a few things that were not done correctly.  I recently started and am trying to get them figured out.  I have two site servers which I cannot remove from SCCM.  Below
    is their status as well as what I've tried...
    Site Server Issue #1
    Site Code L56 - The server was a secondary server but for whatever reason has been taken offline and no longer exists without performing an uninstall first.  It is listed in SCCM Sites as "Deleting"
    After research, I opened regedit, and browsed to HKML\SOFTWARE\Microsoft\SMS\Components\SMS_COMPONENT_MANAGER where i saw a key with the site server's name in it.  I changed the value "Deinstallation Start Time" to "1" in the key
    as well as sub keys (2 more values) using
    these instructions.  I restarted the SMS_COMPONENT service, and then loaded up the console, but it was still there.  Back in the registry, though, the key was completely gone.  
    I also tried to use preinst.exe.  When I run the string "preinst /delsite L56", I get "Cannot find site [L56] in the site control data in the database. Checking in ServerData in the database."  What gives?
    Site Server Issue #2
    There was a site server which was a secondary site - however - it wasn't working correctly and we were on a dead line so this past weekend i uninstalled it as a secondary site, verified / installed pre-reqs, then simply deployed a distribution point and
    management point role to it.  
    Now, I'm trying to turn it back into a secondary site which is installed properly.  I deleted the site roles which I could (seemingly successfully as the DP shares and services are gone from the server.) In the console, I go to delete the site server,
    itself, but get the error saying it cannot be deleted because it contains site system roles (and lists Component Manager.)  
    I thought to try preinst.exe for this one also, but it has the same Site Code as our Primary Site Server.  
    Both servers are running Windows Server 2012  & SQL 2012.
    Any Ideas?  Thanks!
    Ben K.

    Similar Issue. Have a child site that is showing "Deleting" in the SCCM console. Used preinst.exe, but it states: 
    "Cannot find site [S01] in the site control data in the database. Checking in ServerData in the database.[S01]
    is not a known site."
    How do I get rid of the child site in the SCCM console, and when I do, would it be safe to set up another child site with the same name and site?

  • Additional system roles in SOLAR01/SOLAR02

    Hello,
    Is it possible by customizing or something else, to have more than the Dev/Qas/Prod system roles selectible in SOLAR01 and SOLAR02 ?
    I have logical components where there are other types of systems, and I would like to use them in my Blueprint/Configuration.
    Thanks.
    Thomas

    Goto SMSY
    Goto Project Landscape
    select your project
    now you see your logical components for your project, in here you can add via system role assigment other system roles like evaluations, demo, sap referecen etc... if you want more than available here, click on "Systm Roles" in the System Role Assigment and you can add your customer Roles
    once you did that, this will be visible in solar02 / system-role
    Edited by: Nesimi Buelbuel on Jun 12, 2009 10:51 AM
    Edited by: Nesimi Buelbuel on Jun 12, 2009 10:52 AM

Maybe you are looking for