Scenario session log

I am using ODi 10.1.3.6.0 I have unique issue for logging details in operator, When I run the same scenaro it delets previous log detail and all the lower level of deatils about each step, only the highest level of log entry stay in operator log. I am executing my scenario each time with log level of 5.
Thanks
Kaashi

I know that it could be a stupid question but have you got some filters? Are you checking "yesterday" list?
Check Odi session number. They are a sequence followed by 3digit (id repo). For example if you have got a repo with id 123 you should have
*000001*123
*000002*123
*000003*123
*000004*123
and so on..
have you got any gap?

Similar Messages

  • Wrong table is displayed in session log(10.1.3.4.1)

    Hi
    i have a interesting scenario in apps implementation.scenario is as follows
    preconditions: i enabled cache in nqsconfig.ini file
    i got the correct results in obiee answers.but when i look in session log i found that physical query itself is going to wrong database(may be it
    displayed the query earlier,session log is not updated.i click on close cursors,cleared cache,still same problem exists,some times i did not got session log( log not displayed)(evenif i put loglevel as 2 or 3 in rpd).anyone has some input
    i restarted servers also,but no use
    regards
    mervin

    Hi Mervin, Previously i had same problem.
    Someboby previously used Loglevel 5 or more on that Database. thats why still it is showing that queries only.
    My suggestion is once again clear the cache and Increase the Loglevel 5 or more and run the queries once again.
    I was also done the same steps when i was facing the same error.
    Thanks
    Sree
    Edited by: GSR on Oct 27, 2010 11:52 AM

  • How to make ODI scenario sessions run mutually exclusive

    We want to restrict the end user of the ODI scenario to be able to run only 1 instance of the scenario at once. Is it possible in ODI ? Basically we want the ODI scenario sessions to be mutually exclusive ? if one is running, and if user tried to run another one, it should not allow him to do so.
    Please note that we are aware of how to handle parallel runs while coding for the same, but here we don't even want to get to a situation like that.
    Thanks,
    Ankit

    Hi Ankit,
    Trying to help...
    Two solutions -
    Solution 1:-
    Create a dedicated agent for that particular execution and for that agent set the maximun number of execution as 1.
    (so only one session will be executed at a time)
    Solution 2:-
    Create a log table/ (lock table) to maintain the status of the execution . (column - Session state)
    When ever an execution starts change the satus of the log (lock) table column as "Running"
    and once the session is completed change the status of the column as "Not Running"
    And in the package (starting) put a condition variable to check the column - Session state of the table log table/ (lock table)
    if its running exit the application , else continue.
    Hope this helps.
    Regards,
    Rathish

  • Error from the session log between Informatica and SAP BI

    HI friends,
          I am working extraction from bi by Informatica 8.6.1.
          now, I start the process Chain from bi, and I got a error from Informatica's session log.Pls help me to figure out what's going on during me execution.
    Severity     Timestamp     Node     Thread     Message Code     Message
    INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6228     Writing session output to log file [D:\Informatica\PowerCenter8.6.1\server\infa_shared\SessLogs\s_taorh.log].
    INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6014     Initializing session [s_taorh] at [Fri Dec 17 11:01:31 2010].
    INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6683     Repository Name: [RepService_dcinfa01]
    INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6684     Server Name: [IntService_dcinfa01]
    INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6686     Folder: [xzTraining]
    INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6685     Workflow: [wf_taorh] Run Instance Name: [] Run Id: [43]
    INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6101     Mapping name: m_taorh.
    INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6964     Date format for the Session is [MM/DD/YYYY HH24:MI:SS.US]
    INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6703     Session [s_taorh] is run by 32-bit Integration Service  [node01_dcinfa01], version [8.6.1], build [1218].
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24058     Running Partition Group [1].
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24000     Parallel Pipeline Engine initializing.
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24001     Parallel Pipeline Engine running.
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24003     Initializing session run.
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     CMN_1569     Server Mode: [UNICODE]
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     CMN_1570     Server Code page: [MS Windows Simplified Chinese, superset of GB 2312-80, EUC encoding]
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6151     The session sort order is [Binary].
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6156     Using low precision processing.
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6180     Deadlock retry logic will not be implemented.
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     SDKS_38029     Loaded plug-in 300320: [PowerExchange for SAP BW - OHS reader plugin 8.6.1 build 183].
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     SDKS_38024     Plug-in 300320 initialization complete.
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     PCCL_97003     [WARNING] Real-time session is not enabled for source [AMGDSQ_IS_TAORH]. Real-time Flush Latency value must be 1 or higher for a session to run in real time.
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     SDKS_38016     Reader SDK plug-in intialization complete.
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6307     DTM error log disabled.
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TE_7022     TShmWriter: Initialized
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6007     DTM initialized successfully for session [s_taorh]
    INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     PETL_24033     All DTM Connection Info: [<NONE>].
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24004     PETL_24004 Starting pre-session tasks. : (Fri Dec 17 11:01:31 2010)
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24027     PETL_24027 Pre-session task completed successfully. : (Fri Dec 17 11:01:31 2010)
    INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     PETL_24006     Starting data movement.
    INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6660     Total Buffer Pool size is 1219648 bytes and Block size is 65536 bytes.
    INFO     2010-12-17 11:01:31     node01_dcinfa01     READER_1_1_1     OHS_99013     [INFO] Partition 0: Connecting to SAP system with DESTINATION = sapbw, USER = taorh, CLIENT = 800, LANGUAGE = en
    INFO     2010-12-17 11:01:32     node01_dcinfa01     READER_1_1_1     OHS_99016     [INFO] Partition 0: BW extraction for Request ID [163] has started.
    Edited by: bi_tao on Dec 18, 2010 11:46 AM

    INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8167     Start loading table [VENDOR] at: Fri Dec 17 11:01:32 2010
    INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8168     End loading table [VENDOR] at: Fri Dec 17 11:01:32 2010
    INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8141     
    Commit on end-of-data  Fri Dec 17 11:01:32 2010
    ===================================================
    WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
    WRT_8044 No data loaded for this target
    INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8143     
    Commit at end of Load Order Group  Fri Dec 17 11:01:32 2010
    ===================================================
    WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
    WRT_8044 No data loaded for this target
    INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8035     Load complete time: Fri Dec 17 11:01:32 2010
    LOAD SUMMARY
    ============
    WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
    WRT_8044 No data loaded for this target
    INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8043     ****END LOAD SESSION****
    INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8006     Writer run completed.
    INFO     2010-12-17 11:01:33     node01_dcinfa01     MANAGER     PETL_24031     
    RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
    Thread [READER_1_1_1] created for [the read stage] of partition point [AMGDSQ_IS_TAORH] has completed. The total run time was insufficient for any meaningful statistics.
    Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [AMGDSQ_IS_TAORH] has completed. The total run time was insufficient for any meaningful statistics.
    Thread [WRITER_1_*_1] created for [the write stage] of partition point [VENDOR] has completed. The total run time was insufficient for any meaningful statistics.
    INFO     2010-12-17 11:01:33     node01_dcinfa01     MANAGER     PETL_24005     PETL_24005 Starting post-session tasks. : (Fri Dec 17 11:01:33 2010)
    INFO     2010-12-17 11:01:33     node01_dcinfa01     MANAGER     PETL_24029     PETL_24029 Post-session task completed successfully. : (Fri Dec 17 11:01:33 2010)
    INFO     2010-12-17 11:01:33     node01_dcinfa01     MAPPING     SDKS_38025     Plug-in 300320 deinitialized and unloaded with status [-1].
    INFO     2010-12-17 11:01:33     node01_dcinfa01     MAPPING     SDKS_38018     Reader SDK plug-ins deinitialized with status [-1].
    INFO     2010-12-17 11:01:33     node01_dcinfa01     MAPPING     TM_6018     The session completed with [0] row transformation errors.
    INFO     2010-12-17 11:01:33     node01_dcinfa01     MANAGER     PETL_24002     Parallel Pipeline Engine finished.
    INFO     2010-12-17 11:01:33     node01_dcinfa01     DIRECTOR     PETL_24013     Session run completed with failure.
    INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6022     
    SESSION LOAD SUMMARY
    ================================================
    INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6252     Source Load Summary.
    INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     CMN_1537     Table: [AMGDSQ_IS_TAORH] (Instance Name: [AMGDSQ_IS_TAORH]) with group id[1] with view name [Group1]
          Rows Output [0], Rows Affected [0], Rows Applied [0], Rows Rejected[0]
    INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6253     Target Load Summary.
    INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     CMN_1740     Table: [VENDOR] (Instance Name: [VENDOR])
          Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
    INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6023     
    ===================================================
    INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6020     Session [s_taorh] completed at [Fri Dec 17 11:01:33 2010].

  • SQL Errors In Informatica Session Logs

    I am running a new installation of Analytics 7.9.6. No customizations have been made, and I'm trying to load data from a vanilla "Vision" instance of EBS 11.5.10. I have successfully completed loading of the Financial Analytics data warehouse tables, and have set up a new Execution Plan to load the Supply Chain/Order Management Analytics data warehouse tables.
    In loading the Supply Chain tables, however, Informatica jobs are failing for me and I'm not able to complete the initial load. In looking at the session logs, I'm discovering invalid SQL! It looks like malformed SQL is being generated (including fundamental errors like "FROM not expected"). When I try to take these SQL statements and run them SQL*Developer, I'm finding that there are indeed syntax errors. In one case, the SQL statement was that failed was a very simple Select/From/Where with correct syntax, however, the field name in the Where clause did not exist in my EBS instance. ( SDE_ORA_Project_HierarchyDimension_Stage2 - "SYS_PROGRAM_FLAG" field doesn't exist in the PA_PROJECTS_ALL source table )
    Any SC-OM veterans out there with thoughts on why this would be going wrong???
    Thank you!

    This seems to be related to a patchset M required on the EBS system. See the following Metalink note:
    Tasks Related To Projects Table Failed During Full Load [ID 1300293.1]
    Here are the details:
    Cause
    The Employee Expenses subject area in DAC includes several Project Dimension tasks and patchset M has not been applied to EBS 11.5.10
    Solution
    1). As documented in the Oracle Business Intelligence Applications Release Notes > section 1.3.30 Implementation of Oracle Project Analytics with Oracle eBusiness Suite 11.5.10:
    Implementation of Oracle Project Analytics with Oracle eBusiness Suite 11.5.10
    requires Family Pack M (11i.PJ_PF.M) to be applied to Oracle eBusiness Suite 11.5.10.
    2). The customer does not use OBI Project Analytics as it is not used in eBusiness at the client site.
    In this case, the recommendation is to disable the Project Dimension as documented in the Oracle Business Intelligence Applications Configuration Guide for Informatica PowerCenter Users > 6.2.1.1 How to Disable Project Dimensions

  • In which table we can find the sessions log

    Hi all,
    I am using BDC using session method,I need to know the  table in which session log is getting updated, one more thing could I able to find the session log for the past one year in SM35, plz help me out.
    regards
    paul

    hi see the below table for logs in session method.
    BDCLM
    regards,

  • Log Could Not Be Retrieved Error in session logs....OBIEE 11.1.1.6.0

    Unable to see session logs in session manager since 2 days. I'm using OBIEE 11.1.1.6.0. current log file size is 66MB.
    Error
    Log Could Not Be Retrieved
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27002] Near <2310275073>: Syntax error [nQSError: 26012] . (HY000)

    Hi,
    This is a know Bug: @ BUG:13737150 - UNABLE TO VIEW LOG FILE FROM ADMINISTRATION > MANAGE SESSIONS
    Download and apply OBIEE 11.1.1.6.2 BP1. It is fixed in this version.
    Thanks.

  • Session logs for shop admin

    Hi Team,
    I need some inputs and help.
    We are using CRM ISA 6.0 SP06. We are using the webshop functionality.
    We currently analyze the errors in the webshop via the session logs which we have configured.
    Now, when we have done the same setup for shop admin, we are unable to see any session logs.
    Session logs for shop admin are not working. Session logs for webshop works and we are able to view the same.
    We have already done the below settings in http://host:port/shopadmin/admin
    XCM -
    appinfo:True
    logfiledownload:True and restart of the J2EE engine.
    We get the below error when we check for the logs:
    Application error occurred during request processing.
      java.lang.Exception: java.io.FileNotFoundException: /session-2010-2-25_13-10_(J2EE967404400)ID1521894650DB00028780023514142548End.log (No such file or directory (errno:2))
    Exception id: [0017A477401000660000016A00005E840004806C842020FC]
    Please let me know if we are missing something.
    Thanks
    Warm Regards,
    Rajeet

    For VPN session, it's best to log the following syslog messages:
    For WebVPN:
    Syslog#: 716001 - user connects:
    http://www.cisco.com/en/US/docs/security/asa/asa82/system/message/logmsgs.html#wp4776913
    Syslog#: 716002 - user disconnects:
    http://www.cisco.com/en/US/docs/security/asa/asa82/system/message/logmsgs.html#wp4776918
    For IPSec VPN Client:
    Syslog#: 611101 - user connects:
    http://www.cisco.com/en/US/docs/security/asa/asa82/system/message/logmsgs.html#wp4774570
    Syslog#: 611102 - user authentication fails:
    http://www.cisco.com/en/US/docs/security/asa/asa82/system/message/logmsgs.html#wp4774576
    Syslog#: 611103 - user logoff:
    http://www.cisco.com/en/US/docs/security/asa/asa82/system/message/logmsgs.html#wp4774581

  • SESSION LOGS

    hi
    i wanna view the session logs either successfull or even having errors , in the spool.
    can any one gimme an advive how to go about it .
    thanks in advance

    Look at Reading session log. These two threads will give all the details you need to know about the sessions.
    Srinivas

  • Report for Session Log

    Dear All,
    I am trying to develop a report to read the log of a bdc session.
    I have a BDC session named Test1 created on 26.09.2008.
    Once  the session is finished i need to get the log using a report.
    Can any one please suggest if something could be done in his regard
    Thanks and best regards
    Sivaprasad

    Hi,
    The issue does not pertain to SAP Business One. Please check the following threads if of help in your case :
    regarding BDC Session
    want to access the BDC Session log
    You can get the solution for your issue by posting  a thread in the following forum :
    ABAP Connectivity
    Please close the thread here.
    Regards,
    Jitin

  • Gnome 3.8 - can't find .xsession-errors or ~/.cache/gdm/session.log

    In one of these two files, Gnome is supposed to log. But I can't find any of these! My ~/.cache directory doesn't even include a gdm folder.
    So where does the Gnome-Session log to?
    (I start Gnome with gdm)
    Thank you!

    Answer found:
    https://bbs.archlinux.org/viewtopic.php … 1#p1270301
    don_crissti wrote:
    It's in systemd journal.
    You should be able to get the session.log if you filter the journal with something like:
    journalctl -b -o cat _PID=$(pgrep gnome-session)
    although that's not really comfortable...

  • SSH Session Logging

    is there anyway to turn on global SSH session logging?
    as in log exactly what is being done by any logged in SSH user? i know there are log levels for SSH in ssh_config but short of trying each level out i didn't see mention of a level that explicitly logged full sessions.
    how about per user? i suppose i do only use 1-2 users.
    thanks!

    Can you clarify a bit what you would like done? Do you want to log connections, logins and logouts or do you want to log SSH session activity i.e. commands are entered and what not? If its the latter you will not be able to do that will syslog. You may want to look into system accounting. For more on system accounting man "accton", "sa", "lastcomm". If you are just looking for logins and logouts the last command should point you in the right direction.
    Hope that helps!
    - Barrett

  • Regarding Session log messages format..

    Hi All,
        I am reading session logs as follows,
        CALL FUNCTION 'RSTS_READ'
        TABLES
          DATATAB  = LOG_TABLE
        EXCEPTIONS
          FB_CALL_HANDLE =  4
          FB_ERROR       =  8
          FB_RSTS_NOCONV = 12
          FB_RSTS_OTHER  = 16
          OTHERS         = 16.
    I am getting all my messages in the Log_table,
    But those messages or not formated is there any Function module to format the session log messages ??
      Plz let me know if any ASAP.
    Thanks
    Suresh

    hi,
    try with FM format_message, it works.
    see the sample code,
    data: l_message type string.
          if tab_error-msgtyp = 'I' or tab_error-msgtyp = 'S'.
            call function 'FORMAT_MESSAGE'
              exporting
                id        = tab_error-msgid
                lang      = 'EN'
                no        = tab_error-msgnr
                v1        = tab_error-msgv1
                v2        = tab_error-msgv2
                v3        = tab_error-msgv3
                v4        = tab_error-msgv4
              importing
                msg       = l_message
              exceptions
                not_found = 1
                others    = 2.
            if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
            endif.
    reward points if useful,
    regards,
    seshu.

  • Session/log reorganization

    Hi all,
    We have R/3 system 46C-SP52/Windows and Oracle as database (9206), and we have some consistency problem in TEMSE, I've already check/delete all inconsistencies and check all the parameters linked to the output. finaly, I've check tables APQI-APQL-APQD, and using program "RSBDC_REORG" to reorganize sessions/logs the print report shows the sessions (dated year 2003) and no deletion done...so, I found that the table APQI include many entries for year 2003 and not APQL. my question : is there a tool to reorge this inconsistency because I don't want to write a oracle statment to delete all entries in this table because based on the trace the updated tables are APQD, APQI, APQL and TST01.
    Regards,
    Aziz K.

    Check this SAP Note:
    https://service.sap.com/sap/support/notes/48400

  • Session log

    I am using fme ver2.5. Is there any way to turn off fme session logging or move it to a different folder? I unchecked the save to file box on my encoder. It is saving the session log in my videos in my documents. Its driving one of my automated back up systems nuts.I would prefer to shut it off or at least log to a different folder. Thanks for any help.

    I do not have FME 2.5 but have latest one, but if it has same UI then in tab Encoding Log , there is check box called Log to File. Uncheck that and see.

Maybe you are looking for

  • Webcenter Spaces Events Service configuration: FATAL Alert BAD CERTIFICATE

    Hello, I have a simple requirement to connect the events taskflow from an exchange server that is https and has a confirmed security certificate. I use the wsdl path for the events service and add it to my webcenter spaces service configuration -> Pe

  • New error messages related to OHW - filling up error logs.

    We've recently received a new delivery of help files (new helpset), but there have also been many other changes to our base software system in the interim.  This makes it hard to nail down the culprit. That said, we are now seeing two messages in the

  • Photo Smart 2610 will not Print Labels from Word Perfect

    Nothing happens - no error message - no documents showing up in queue......Nothing at all happens, as if no print command was sent. All other printing is fine.

  • Converting rounded corner to square

    I am trying to create a shape (wide rectangle) that has rounded corners on the top and square corners on the bottom that will fit/blend in with a another square block below. This has got to ba a simple procedure, but I have never figured out an easy

  • Forwarded email Text is very very small

    If I forward an email in Mail, when the person receives it, the font is small small it is unreadable. I'm using an earthlink account. I checked my font sizes and they are all at 20. OS X iMac   Mac OS X (10.3.9)