Scenarios Upgrade from PI 7.0 to PI 7.1

Hi All,
I have my Design Objects (like Message Interfaces, Graphical Mapping, BPM , WebServices as External Definations, Proxies etc. )
and Configuration Objects (like Adapters etc. ) developed in PI 7.0.
I want to migrate all my scenarios from PI 7.0 to PI 7.1
Questions:
1. When all the above scenarios will be migrated to PI 7.1 will it work fine or any changes required from my side.
2. Also does anybody have blogs/notes for PI 7.1 upgradation.
Regards

1. The design objects and configuration objects will work fine in PI 7.1 as migrated from PI 7.0.
Some configuration settings in PI and connected systems need to be created from your side like metadata,rfc destination,ports etc.
2. For PI7.1 upgrdation look these :
PI to PI 7.1 upgrade
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40a0868a-9d40-2b10-8cb4-8e0c53b56655
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8085e299-718c-2a10-de94-928f62b763ce

Similar Messages

  • Upgrading from Exchange 2007 SP2 to SP3 stops and fails with Performance Counter

    We are upgrading from Exchange 2007 SP2 to SP3.
    Exchange Server is on Windows 2008 Enterprise 64 bit OS -SP2
    DC is on windows 2008 Enterprise 32 bit OS - SP2
    When we run Exchange SP3 setup.exe GUI, it runs through the pre-requisites completely and then starts to configure the Hub Transport services but @ exactly 55% it throws an error window "Exchange Server Setup encountered an error"
    On repeating this process i noticed it throws the same error at 55% while "Performance COunter Configuring". Please find below the entries of exchangesetup.log
    [2/1/2015 1:09:30 PM] [0] **********************************************
    [2/1/2015 1:09:30 PM] [0] Starting Microsoft Exchange 2007 Setup
    [2/1/2015 1:09:30 PM] [0] **********************************************
    [2/1/2015 1:09:30 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
    [2/1/2015 1:09:30 PM] [0] Setup version: 8.3.83.6.
    [2/1/2015 1:09:30 PM] [0] Logged on user: chakfig\Administrator.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [2/1/2015 1:09:30 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
    [2/1/2015 1:09:30 PM] [0] Setup is choosing the domain controller to use
    [2/1/2015 1:09:31 PM] [0] Setup is choosing a local domain controller...
    [2/1/2015 1:09:35 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
    [2/1/2015 1:09:35 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
    [2/1/2015 1:09:35 PM] [0] Setup is choosing a global catalog...
    [2/1/2015 1:09:35 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
    [2/1/2015 1:09:35 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 1:09:35 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
    [2/1/2015 1:09:35 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
    [2/1/2015 1:09:35 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 1:09:35 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 1:09:35 PM] [0] The local server has some Exchange files installed.
    [2/1/2015 1:09:35 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
    [2/1/2015 1:09:35 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] 'BridgeheadRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] 'ClientAccessRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] 'MailboxRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] The server is cluster type: 'None'.
    [2/1/2015 1:09:35 PM] [0] The requested cluster type: 'None'.
    [2/1/2015 1:09:35 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
    [2/1/2015 1:09:35 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
    [2/1/2015 1:09:35 PM] [0] Active Directory Initialization status : 'True'.
    [2/1/2015 1:09:35 PM] [0] Schema Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] Organization Configuration Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] Domain Configuration Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] The locally installed version is 8.3.83.6.
    [2/1/2015 1:09:35 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 1:09:35 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 1:09:35 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
    [2/1/2015 1:09:36 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 1:09:36 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 1:09:36 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 1:09:36 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 1:12:38 PM] [0] End of Setup
    [2/1/2015 1:12:38 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] Starting Microsoft Exchange 2007 Setup
    [2/1/2015 2:17:36 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
    [2/1/2015 2:17:36 PM] [0] Setup version: 8.3.83.6.
    [2/1/2015 2:17:36 PM] [0] Logged on user: chakfig\Administrator.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [2/1/2015 2:17:37 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
    [2/1/2015 2:17:41 PM] [0] Setup is choosing the domain controller to use
    [2/1/2015 2:17:41 PM] [0] Setup is choosing a local domain controller...
    [2/1/2015 2:17:43 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
    [2/1/2015 2:17:43 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
    [2/1/2015 2:17:43 PM] [0] Setup is choosing a global catalog...
    [2/1/2015 2:17:43 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
    [2/1/2015 2:17:43 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:17:43 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
    [2/1/2015 2:17:43 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
    [2/1/2015 2:17:43 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:17:43 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:17:43 PM] [0] The local server has some Exchange files installed.
    [2/1/2015 2:17:43 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
    [2/1/2015 2:17:43 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] 'BridgeheadRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] 'ClientAccessRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] 'MailboxRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] The server is cluster type: 'None'.
    [2/1/2015 2:17:43 PM] [0] The requested cluster type: 'None'.
    [2/1/2015 2:17:43 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
    [2/1/2015 2:17:43 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
    [2/1/2015 2:17:43 PM] [0] Active Directory Initialization status : 'True'.
    [2/1/2015 2:17:43 PM] [0] Schema Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] Organization Configuration Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] Domain Configuration Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] The locally installed version is 8.3.83.6.
    [2/1/2015 2:17:43 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 2:17:43 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 2:17:43 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
    [2/1/2015 2:17:43 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 2:17:43 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 2:17:43 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 2:17:43 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 2:17:47 PM] [0] Validating options for the 4 requested roles
    [2/1/2015 2:17:47 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
    [2/1/2015 2:17:52 PM] [0] Validating options for the 4 requested roles
    [2/1/2015 2:17:52 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
    [2/1/2015 2:17:53 PM] [0] **************
    [2/1/2015 2:17:53 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:17:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.3.83.6' -Roles 'Bridgehead' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server''  
    [2/1/2015 2:17:53 PM] [1] Beginning processing.
    [2/1/2015 2:18:19 PM] [1] Beginning processing.
    [2/1/2015 2:18:19 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:19 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:19 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [1] Beginning processing.
    [2/1/2015 2:18:20 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:20 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
    [2/1/2015 2:18:20 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:20 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [0] **************
    [2/1/2015 2:18:20 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:18:20 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:18:20 PM] [1] Beginning processing.
    [2/1/2015 2:18:26 PM] [1] Beginning processing.
    [2/1/2015 2:18:26 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:55 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
    [2/1/2015 2:18:55 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:55 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:55 PM] [1] Ending processing.
    [2/1/2015 2:18:55 PM] [1] Ending processing.
    [2/1/2015 2:18:55 PM] [0] **************
    [2/1/2015 2:18:55 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:18:55 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:18:55 PM] [1] Beginning processing.
    [2/1/2015 2:19:01 PM] [1] Beginning processing.
    [2/1/2015 2:19:01 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:19:01 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:01 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:19:01 PM] [1] Ending processing.
    [2/1/2015 2:19:01 PM] [1] Ending processing.
    [2/1/2015 2:19:01 PM] [0] **************
    [2/1/2015 2:19:01 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:19:01 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'Mailbox' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:19:01 PM] [1] Beginning processing.
    [2/1/2015 2:19:04 PM] [1] Beginning processing.
    [2/1/2015 2:19:04 PM] [1] Ending processing.
    [2/1/2015 2:19:07 PM] [1] Beginning processing.
    [2/1/2015 2:19:07 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:19:07 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:07 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:19:07 PM] [1] Ending processing.
    [2/1/2015 2:19:08 PM] [1] Ending processing.
    [2/1/2015 2:19:20 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 2:19:20 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 2:19:20 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 2:19:20 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 2:19:20 PM] [0] **************
    [2/1/2015 2:19:20 PM] [0] Setup will run the task 'Install-BridgeheadRole'
    [2/1/2015 2:19:20 PM] [1] Setup launched task 'Install-BridgeheadRole -DomainController 'PGCDC.chakfig.local' -UpdatesDir 'J:\EXSP01\SP3\Updates''  
    [2/1/2015 2:19:20 PM] [1] Beginning processing.
    [2/1/2015 2:19:20 PM] [1] Attempting Install for BridgeheadRole.
    [2/1/2015 2:19:20 PM] [1] The following roles are current: 
    [2/1/2015 2:19:26 PM] [1] Reading components for role 'BridgeheadRole' from 'res://BridgeheadRoleDefinition.xml'
    [2/1/2015 2:19:26 PM] [1] Found 22 components
    [2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First - Run Once' with 10 task info blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
    [2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First' with 8 task info blocks from 'res://AllRolesCommonFirst.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'All Roles Precompile Management Binaries' with 30 task info blocks from 'res://AllRolesPrecompileManagementBinaries.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Bridgehead Permissions Configuration' with 1 task info blocks from 'res://BridgeheadLocalPermissionsComponent.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Common Perf Counters ' with 2 task info blocks from 'res://CommonPerfCountersComponent.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Provision Server' with 9 task info blocks from 'res://ProvisionServerComponent.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'All Active-Directory Roles Common' with 14 task info blocks from 'res://AllADRolesCommon.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 Pseudo-MTA Configuration' with 1 task info blocks from 'res://LegacyMTAComponent.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 SMTP VSI Configuration' with 1 task info blocks from 'res://LegacySMTPComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Perf Counters' with 21 task info blocks from 'res://TransportPerfCountersComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Enable RPC-EPMAP firewall exception' with 1 task info blocks from 'res://RpcEpmapFirewallException.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Bridgehead Role Setter' with 1 task info blocks from 'res://BridgeheadRoleSetterComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Common Configuration' with 22 task info blocks from 'res://TransportCommonComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Perf Counters' with 8 task info blocks from 'res://BridgeheadPerfCountersComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Configuration' with 18 task info blocks from 'res://BridgeheadComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Transport Log Search Service' with 1 task info blocks from 'res://TransportLogSearchServiceComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Data Storage Configuration' with 1 task info blocks from 'res://DataStorageComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Monitoring Service Configuration' with 5 task info blocks from 'res://MonitoringComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Active Directory Topology Service Configuration' with 2 task info blocks from 'res://AllADRolesCommonServiceControl.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Bridgehead Service Configuration' with 3 task info blocks from 'res://BridgeheadServiceControl.xml'
    [2/1/2015 2:19:32 PM] [1] Loaded component 'Transport Common Service Control' with 1 task info blocks from 'res://TransportCommonServiceControl.xml'
    [2/1/2015 2:19:32 PM] [1] Loaded component 'All Roles Common Last' with 4 task info blocks from 'res://AllRolesCommonLast.xml'
    [2/1/2015 2:19:32 PM] [1] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:19:32 PM] [1] Writing informational script to 'C:\ExchangeSetupLogs\Install-BridgeheadRole-20150201-1419320497.ps1'
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClusterNode = $False', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClusterNode = $False'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsAdminToolsRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsAdminToolsRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleNetBIOSName = "pgcvmexg"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleNetBIOSName = "pgcvmexg"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInvocationID = "20150201-1419320497"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInvocationID = "20150201-1419320497"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleStartTransportService = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleStartTransportService = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggedOnUser = "chakfig\Administrator"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggedOnUser = "chakfig\Administrator"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallationMode = "BuildToBuildUpgrade"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallationMode = "BuildToBuildUpgrade"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RolePreviousVersion = "8.2.176.2"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RolePreviousVersion = "8.2.176.2"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsMailboxRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsMailboxRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleUpdatesDir = "J:\EXSP01\SP3\Updates"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "J:\EXSP01\SP3\Updates"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleDomainController = "PGCDC.chakfig.local"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.chakfig.local"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
    [2/1/2015 2:19:32 PM] [1] Found 136 tasks to execute
    [2/1/2015 2:19:32 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
    [2/1/2015 2:19:32 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
    } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
    = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");'.
    [2/1/2015 2:19:32 PM] [2] Beginning processing.
    [2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/1/2015 2:19:33 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/1/2015 2:19:33 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
    = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:35 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
    [2/1/2015 2:19:35 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
    [2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
    [2/1/2015 2:19:35 PM] [1] Executing 'Set-LocalPermissions', handleError = False
    [2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
    [2/1/2015 2:19:35 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
    handleError = True
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
    -MofFilePath:$mflFilePath;'.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
    [2/1/2015 2:19:49 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
    [2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:50 PM] [2] Process standard error: 
    [2/1/2015 2:19:50 PM] [2] Ending processing.
    [2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:50 PM] [2] Beginning processing.
    [2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
    [2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:50 PM] [2] Process standard error: 
    [2/1/2015 2:19:50 PM] [2] Ending processing.
    [2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:50 PM] [2] Beginning processing.
    [2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
    [2/1/2015 2:19:51 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:51 PM] [2] Process standard error: 
    [2/1/2015 2:19:51 PM] [2] Ending processing
    [2/1/2015 2:20:07 PM] [2] Process standard error: 
    [2/1/2015 2:20:07 PM] [2] Ending processing.
    [2/1/2015 2:20:07 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:20:07 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:20:07 PM] [2] Beginning processing.
    [2/1/2015 2:20:07 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll" /verbose
    [2/1/2015 2:20:10 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll
    All compilation targets are up to date.
    [2/1/2015 2:20:10 PM] [2] Process standard error: 
    [2/1/2015 2:20:10 PM] [2] Ending processing.
    [2/1/2015 2:20:10 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:20:10 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:20:10 PM] [2] Beginning processing.
    [2/1/2015 2:20:10 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll" /verbose
    [2/1/2015 2:20:12 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll
    All compilation targets are up to date.
    [2/1/2015 2:20:12 PM] [2] Process standard error: 
    [2/1/2015 2:20:12 PM] [2] Ending processing.
    [2/1/2015 2:20:12 PM] [1] Processing component 'Bridgehead Permissions Configuration' (Setting folder and registry permissions).
    [2/1/2015 2:20:12 PM] [1] Executing 'Set-LocalPermissions -Feature:"Bridgehead"', handleError = False
    [2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions -Feature:"Bridgehead"'.
    [2/1/2015 2:20:12 PM] [2] Beginning processing.
    [2/1/2015 2:20:12 PM] [2] Ending processing.
    [2/1/2015 2:20:12 PM] [1] Processing component 'Common Perf Counters ' (Configuring performance counters).
    [2/1/2015 2:20:12 PM] [1] Executing 'new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml', handleError = True
    [2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml'.
    [2/1/2015 2:20:12 PM] [2] Beginning processing.
    [2/1/2015 2:20:12 PM] [2] Processing file: C:\Program Files\Microsoft\Exchange Server\Setup\Perf\ExchangeTopologyPerformanceCounters.xml
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Latest Exchange Topology Discovery Time in Seconds, type is NumberOfItems32.
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Exchange Topology Discoveries, type is NumberOfItems32.
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Siteless Servers, type is NumberOfItems32.
    Appreciate if someone can help us move forward in this scenario.
    We have
    1. disabled anti virus and tried.
    2. removed watermarks and action entries in the registry
    3. tried almost everything mentioned on google but i am not able to move forward.
    Please help. we need this as part of our migration to Exchange 2013 for co-existence.
    Thank you.
    Philip

    ExchangeSetup.log (part 3)
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleUpdatesDir = "C:\SP3\Updates"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "C:\SP3\Updates"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleDomainController = "PGCDC.platcorp.local"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.platcorp.local"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
    [2/2/2015 8:06:45 PM] [1] Found 136 tasks to execute
    [2/2/2015 8:06:45 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
    [2/2/2015 8:06:45 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
    } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
    = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");'.
    [2/2/2015 8:06:45 PM] [2] Beginning processing.
    [2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/2/2015 8:06:45 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/2/2015 8:06:45 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
    = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
    [2/2/2015 8:06:47 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-LocalPermissions', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:07:00 PM] [2] Ending processing.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
    handleError = True
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
    -MofFilePath:$mflFilePath;'.
    [2/2/2015 8:07:00 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
    [2/2/2015 8:07:01 PM] [2] Ending processing.
    [2/2/2015 8:07:01 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
    [2/2/2015 8:07:01 PM] [2] Ending processing.
    [2/2/2015 8:07:01 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
    [2/2/2015 8:07:01 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:01 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:01 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll" /verbose
    [2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:03 PM] [2] Process standard error: 
    [2/2/2015 8:07:03 PM] [2] Ending processing.
    [2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:03 PM] [2] Beginning processing.
    [2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll" /verbose
    [2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:03 PM] [2] Process standard error: 
    [2/2/2015 8:07:03 PM] [2] Ending processing.
    [2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:03 PM] [2] Beginning processing.
    [2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll" /verbose
    [2/2/2015 8:07:04 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll
    All compilation targets are up to date.

  • How to create new field while upgrading from CRM 4.0 to 7.0

    Hi ,
    How do we create new field on UI and store data into existing field in database?
    Is there any option in AET to skip the creation of new field in the database table ?
    Custom field is already created in GUI and database table while using CRM 4.0
    Now, after upgrading to 7.0 EHP3 , I need to bring this field on the UI .
    Using AET may create new field again in the database table.Please suggest.
    New filed needed to be created in Marketing Campaign Element Header data.
    Thanks
    Jayasri

    Hi Jayasri,
    As a custom fields are already there in crm 4.0. You don't need to use AET again to add field.
    These enhancements still exist after the upgrade. Dependent on the enhancement object and type some manual steps are necessary.
    For example regarding a single field enhancement for the BP the whole framework is enhanced after the upgrade. There is only one manual step to bring the field on the relevant view(s) via the UI Configuration Tool. For whole BP tables some more manual steps are necessary, these steps are described in the note 1069791 - CRM WebClient UI for EEW enhancements (reference to more notes regarding the EEW after the upgrade).
    For set types, we need to generate UI With the help of the UI configuration tool the settypes could become visible in the Web UI.
    I didn't understood your scenario, can add little more information why you want to add field by AET if available in DB?
    Refer
    FAQ - SAP CRM Upgrade from release 4.0 to 7.0 
    Regards,
    Arjun

  • BI 7.0: Source System upgrade from R/3 Enterprise to ECC 6.0

    Background:
    I am relatively new to BW team and will be going through my 1st source system upgrade.
    We currently have BI 7.0 SPS 17 connected to source system R/3 Enterprise EP1.
    We are upgrading to the source system to ECC 6.0.
    In Development and QA Environments:
    we will have access to both old (R/3 Enterpirse) and the new (ECC 6.0) source systems.
    We have a opportunity to compare the BW Objects, data flow and data loading from
    both source systems.
    In Production, however, we will just upgrade over 3 days downtime.
    One Question that comes to mind in this regard...
    What sort of things, we should be checking for before and after upgrade in Dev/QA and in Prod environments and what tools are available that can help the analysis and validation process ?
    Some of the suggestions that were given to me include following points.
    Before Upgrade:
    1 Check data, taking pre images of it for testing with post upgrade.
    2. Perform proper analysis of Source system related BW objects.
      - A complete listing of actively used Datasources,.. etc.
    3. Make delta queues empty,
    Make sure that all existing deltas are loaded into BW.The last request delta must not deliver any data and must be green in the monitor.
    4. Stop Process chains from BI (remove from schedule) and collection runs from R/3 side
    After Upgrade:
    1 After the OLTP upgrade, refer to note 458305 and other notes that are relevant to the actual upgrade
    (depending on the R/3 system release / R/3 plug-in to BI plug-in compatibility).
    2. Check logical system connections. Transactions SMQS, RSMO and SM59, If no access, then we can use Program RSRFCPIN_NEW for RFC Test.
    3. Check and/or Activate control parameters for data transfer. SBIW ---> General Settings --->
    Maintain Control Parameters for Data Transfer
    http://help.sap.com/saphelp_nw70/helpdata/EN/51/85d6cf842825469a51b9a666442339/frameset.htm
    4. Check for Changes to extract structures in LBWE Customizing Cockpit 
        - OSS Notes 328181, 396647, 380078 and 762951
    5. Check if all the required transfer structures are active. See OSS Note 324520 for mass activation.
    7. Check if all Source system related BW Objects are active - Transfer rules, Communication rules, update rules,DTPs,..etc. 
    Below is a link for some useful programs in this regard.
    https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=35458
    6. Test all important datasources using RSA3 and check for OLTP Datasources changes .
    As soon as BW notices that the time stamp at the DataSource in the OLTP is newer than the one in the transfer structure, it requests replication of the DataSource and activation of the transfer structure. Transfer the relevant DataSources only if required, and transfer only the ones that have changed (RSA5 -> Delta).
    7. Create Data flow objects (trnasfer rules, infopackages, trnasformations, DTPs) for the Replicate
    new/changed datasources,if needed. 
    8. Check all CMOD enhancements.
    If we are using a customer exit with the extractor in the OLTP, see Note 393492.
    7. Check for unicode (all custom programs or Function Modules for DataSources)
    5.  Check all the queues in RSA7, start delta runs and test data consistency.
    For delta problems:In the BW system, start the 'RSSM_OLTP_INIT_DELTA_UPDATE' program for the DataSource and the source (OLTP) system for which the init selections are then transferred from BW into the ROOSPRMSC and ROOSPRMSF tables in the source system so that the delta can continue.
    9. Take back up of data posted during upgrade for contingency planing.
    10. Run the entire set of process chains once if possible and let it pick up no data or the usual master data.
    Since we have lot of experts in this forum, who have probably gone through such scenario many times, i wanted to request you to Please Please advise if i have stated anything incorrectly or if i am missing additional steps, OSS Notes, important details...

    Thanks Rav for your detailed post and very helpful contribution by posting all the information you had regarding the upgrade.
    We have similar scenario -
    We are upgrading our source system from 4.7 to ECC 6.0. We have our BI system with BI 7.0 at support pack 19 (SAPKW70019).
    Our strategy in ECC deployment  ->
    In development we copied our old DEV 4.7 system DXX to new ECC system DXY (new system ID).
    In production we are going to use same system PRXX upgraded from 4.7 to ECC.
    Now we are in testing phase of ECC with all interfaces like BI in Dev.
    My questions are below ->
    How can we change/transfer mapping of all our datasources in Dev BW system BID to new ECC dev system DXY (Eg. Logical system LOGDXY0040) from Old dev system DXX (Eg. Logical system LOGDXX0040). We donot want to create new datasources or change all transfer rules/Infosources for old BW3.x solutions on our BI.
    Also in new ECC sourcesystem copy  we see all datasources in Red in RSA7 transaction. Do we need to initialize again all the datasources from our BW BID system.
    Is there any easy way for above scenario ?
    Please let me know if you have any further helpful information during your ECC 6.0 upgrade connecting to BI 7.0 system.
    I have found some other links which have some pieces of information regarding the topic -
    Upgrade R/3 4.6C to ECC 6.0 already in BI 7.0
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/sap-r3-migration-and-sap-bw-version-1744205
    BI 7.0: Source System upgrade  from R/3 Enterprise to ECC 6.0
    Re: ECC 6.0 Upgrade
    Re: Impact of ECC 6.0 upgrade on BI/BW Environment.
    ECC 5.0 to ECC 6.0 upgrade
    Thanks
    Prasanth

  • Mapping changes while upgrading from PI 7.0 to PI 7.31

    Hello Experts,
    We are upgrading from PI 7.0 EHP 2 to PI 7.31 SP 14 , Dual stack only.
    While migration, there are some doubts related with mapping, which are not getting cleared even from going through various blogs like:
    Migration Woes?
    PI/XI: PI 7.1 upgrade/migration - Message Mappings
    Below are my doubts:
    As there are mapping changes for IFS, IFSWITHOUT ELSE & Context functions, so exactly what these changes are and how would this work, how can we identify & rectify in all the mappings?
    What changes to be performed for Java mapping & XSLT mapping?
    Are there any changes for ABAP proxy?
    Any help is appreciated
    Many Thanks!!!

    Hi Lisin,
    You need to change in Java mapping accordingly and compile in jre1.6 as many methods used in older version are obsolete now.
    You need to write transform instead of execute which was used for PI 7.0
    public void transform(TransformationInput in, TransformationOutput out) 
                   throws StreamTransformationException { 
    You can easily write the code again in message mapping as discussed:
    Write Java Mapping directly in ESR!
    For XSLT mapping, the older version will be supported as the execution is done using SAP XML Toolkit which is supported in higher versions also.
    XSLT Mapping - Managing Services in the Enterprise Services Repository - SAP Library
    ABAP proxy will be as it is if you are going for classical scenario as you will be using 7.31 Dual stack.
    But if you want to go for AAE Integrated Configuration, you need to do required configuration changes in ECC for outbound Proxy:
    Proxy to file scenario using AAE - with full configuration
    I am not sure whether you need to change in Graphical standard mapping for those functions which are already there in PI 7.0.
    Regards,
    Suman

  • Acrobat 9 upgrade from OEM Acrobat 6

    I've used Acrobat standard in my business since v4.0, and upgraded once to v5.05. I am now migrating to a new WinVistaUltx64 system, and find that Acrobat 5x-8x are not compatible with Vista.
    In order to reduce my costs, I am thinking of purchasing an OEM full Acrobat v6 Standard and Acrobat v9 Standard retail Upgrade. I expect to be able to install the v9 upgrade on my Vista system, using the installation CD from v6 as legacy verification for the v9 upgrade. The OEM v6 will not be installed on the Vista system. I have done this previously when I upgraded to a full retail v5 from a full retail v4, but not from an OEM version. Can anyone with more experience with Adobe Acrobat upgrades advise me of problems I might encounter in this scenario?
    I know that OEM versions don't come with support options, but I have upgraded OEM OS versions to retail versions before, and support became available with the retail upgrade. Will support be attached to the Acrobat v9 retail upgrade, if I am upgrading from an OEM version?

    You have to update to at least AA8.1.2 to use VISTA and 64 bit systems. I think that version will do it. Of course at this time, AA9 is what is available anyway. AA6 does not run on VISTA as far as I know. Be aware, if you do forms you need to upgrade to a PRO version. It is best to think of Std as an economy version. It left a lot out that users of AA4 and AA5 came to expect.
    AA6 works fine on XP. Even AA5 works fine on XP, at least it does for me. I use AA8.1.2 on VISTA Business and AA7 on an XP tablet. As for the OEM upgrades I have no clue to help you. As far as I know, the upgrade will be to the full product. I do think that if you upgrade, the previous version that the upgrade was based upon is not supposed to be used any longer. You did not mention that scenario, but just one aspect to consider in case you had been thinking it.

  • Upgrading from Office 2010 to 365

    Upgrading from Office 2010 Pro to 365 Pro Plus - I know you must uninstall 2010 and install 365 or can run them concurrently. Question is - if you uninstall 2010 and install 365, what settings are lost and what settings are retained? Outlook signatures?  Word
    and Excel settings and preferences? 
    Also must the OST files be re-downloaded again?  I hear there's a 40% compression improvement so this might be ideal, just want to know if the GPO to not re-download the OSTs actually works in this scenario?

    Hi,
    Uninstall Office 2010 will not remove any user settings, the user settings will migrate upon the first use of each Office 2013 application.
    By default, when Outlook 2013 is installed, a new compressed version of the Outlook data file (.ost) is created. This new compressed version of the .ost is up to 40% smaller than the size of the .ost files that were created in earlier versions of Outlook.
    So it is recommended to use the new .ost file.
    The "Do not create new OST file on upgrade" policy also works for Outlook 2013, however you might need to download the new Outlook Group Policy template (Outlk15.admx). Outlook 2010 template should not work in this scenario.
    Regards,
    A.B.

  • Need to understand impact on workflows during upgrade from EBP 3.0 to SRM 5

    Hello experts,
    Greetings to all and a Happy New Year!!
    I am new to the workflow concept, though i have a fair idea of EBP.
    We are using EBP 3.0, classic scenario.  Very soon, we would be upgrading from EBP 3.0 to SRM 5.0. I have a few questions which i need to knw before I take up the upgrade part:
    1) The impact on the worflows like Shopping cart approval, purchase contract approval etc when we upgrade from EBP 3.5 to SRM 5.0...
    2) Does EBP have their own release strategies or are the release strategies defined in R/3 and applied to the shopping cart when it is ordered in EBP? As in classic scenario, POs are created in R/3, then how does the appoval process happen?
    3) What are the necessary things, if any, that I should make sure of before upgrading?
    4) Does all workflows also get upgraded or is there any tool to upgrade the workflow?
    I am not clear with the approval concept in EBP. I know there are workflows that get triggered when a shopping cart is ordered but the approval process in this workflow is something which i want to understand. Please forward me a document, if possible, or a link will also do.
    Please let me know the necessary details.
    Thanks in advance.
    Regards,
    Ayush

    Hi Ayush,
    Most workflows will be the same, but if you have modifications on these workflows' then i'd suggest reverting back to the standards for the upgrade.
    Im not quite sure what you mean about the release strategy. What can be done though, is creating Purchase Requisitions in the R/3 and pass them to the SRM system. From here PO's can be created and the approval process will take place in accordance with your workflow rules in tcode: swb_cond.
    Before upgrading, try to have the system as clean as possible. When i say clean, i mean make sure that users are consistent, SC's, PO's etc arent left hanging. Try to avoid carrying documents over to the new system. I'd suggest archiving anything you can too.
    I don't have any documents to give you but the basic process and transactions are as follows:
    SWB_COND: Your workflow start conditions. Which WF's are on/off (defined by green/red light)
    SWI6: This will let you examine a document and its relevant WF by its object id. (SC No, PO No etc..
    SWUD: Allows for Consistency checks on your workflow and will find any inconsistencies which are occuring. (Use Test Environment and WF Tech Name i.e 14500015)
    SWDD: The workflow builder, will let you build, activate, create new version and modify the worklows in your system.
    Approval itself is simply the chain of approval which a workflow is defined to follow. You need your managers to approve/reject and the conditions for which Managers should be called for approval. Its works from Possible Approvers for workitems and Excluded Approvers for workitems.
    Understanding the WF log is the most essential thing of all. The understanding of BADI is quite important too.
    Hope this info helps you. Check help.sap.com cause everything is documented there too!
    Cheers
    Will

  • Upgrading from PI 7.1 to PI 7.1 Ehp1

    Hi,
      We are planing to upgrade from PI7.1 SP7 to PI 7.1 EHP1.
    How much time will take to do  complete upgrade -
    After upgrade doe's it will effect any EDI scenario's or webserice scenario's
    and what kind of issues we may face while doing upgrade.
    and what else precations we need to take care.
    If there any docuemnt upgradeing from PI 7.1 to EHP1 please provide me the link.
    appriciate your help.
    Regards,
    Venu.

    Hi Venu,
    Please refer this link , it will give you insight to PI 7.1 EHP1 details.
    SAP Enhancement Package 1 for SAP NetWeaver Process Integration 7.1 - Details [original link is broken]
    regards,
    Srinivas

  • Fund Management - Issues in Upgrade from 4.6C to ECC6

    Hello,
    We are upgrading SAP Application for a client who is on 4.6C to ECC6. The client is currently using Funds Management in 4.6C. With ECC6 I understand that this functionality is moved into Public Sector and is available only on activation of IS-PS Extension Set.
    The question I have is that does this activation impact any other business processes or is just a technical activation.
    What I mean is that if I activate this extension set does the system start doing things differently and needs specific data related to Public Sector which the business users will be required to be entered while doing transactions OR the activation will not impact business processes as such and would work as earlier with Funds management active. (except where there was a change in the functionality between 4.6C to ECC6)
    I would like to know the risks, if any involved in upgrading Funds Management from 4.6C to ECC6.
    Please reply and let me know any question to get more clarity on the issue.
    Best Regards
    Kuldeep

    Hi Kuldeep,
    There are several main issues that have to be addresses when upgrading from 4.6 to ECC6. The main ones are:
    1 - Derivations. The object are no longer connected through tables or master data entries (you may have a table that links Cost Centers to Funds Centers for example). These assignments are now maintained through a flexible derivation tool. These derivation rules have to be maintaind, or the posting addresses will have no FM values and you will not be able to post any documents.
    2 - Inventory purchases. The inventory purchases scenarios are no longer maintained through the customization (you can no longer choose one of the 4 inventory scenarios, and there's no warehouse Funds Center). These are all maintained through derivations.
    3 - BCS. There's a new budgeting and AVC tool called "Budget Control System" (BCS). You can either activate it, or keep working with the old budgeting (called "former" in the customization). The new BCS affords flexibility in budgeting and AVC, including several AVC ledgers.
    More data regarding migrations can be found in documentation. If you want, I can send you the PDF document.
    Best regards,
    Shahaf Yaari
    [email protected]

  • Upgrade from 3.0.0.00.20 to 3.1.2

    Hi,
    Could I please get clarification on my options to upgrade my current apex version
    3.0.0.00.20 to 3.1.2.
    Can I just do a full download of 3.1.2 and run apexins.sql
    where it should pick up that it is not a new installation and upgrade?
    Thanks.

    URL http://download.oracle.com/docs/cd/E10513_01/doc/install.310/e10496/overview.htm#i46634 Section 1.2 says the following
    h1. 1.2 Upgrading from a Previous Version of Oracle Application Express
    If you have version 1.5.0.00.33, 1.5.1.00.12, 1.6.0.00.87, 1.6.1.00.03, 2.0.0.00.49, 2.2.1.00.04, 3.0.0.00.20, 3.0.1.00.07, 3.0.1.00.08, or 3.0.1.00.12 of Oracle Application Express, following any of the installation scenarios in this guide upgrades your Oracle Application Express instance to version 3.0 and creates Oracle Application Express 3.0 database objects in a new schema and migrates the application metadata to the new version.
    So yes, installing 3.1.2 will automatically migrate the application metadata to new version.
    Ashish Agarwal (PMP, OCM & OCP)
    http://www.dbcon.com.sg

  • Upgrade from 10.2.0.1 32bit to 10.2.0.4 64bit windows

    This scenario i have planned to make an attempt of my own..
    1) Plan to Migrate existing database from ( 10.2.0.1 ) 32bit to (10.2.0.4) 64bit database
    2)Existing DB is No archive mode,
    3)OS windows server 2003 Enterprise sp 2(32 bit)
    Migrate DB config
    1)Os windows server 2008 Enterprise 64 bit
    I need help from oracle gurus!!! how to migrate existing DB Upgrade from 10.2.0.1 32bit to 10.2.0.4 64bit windows
    1)how to take backup?
    2)how to upgrade oracle version?
    3)proper step to follow completed this task successful
    For database migration and upgrade activity...
    share your suggestions please
    Regards,
    Venk@t

    How big is the database ? How much downtime can you afford ? One option is to install 10.2.0.1 on the target, apply the 10.2.0.4 patch, create an empty instance on target, then export the database from the source and import into target.
    Pl be aware that 10.2.0.1 thru 10.2.0.4 are on sustaining support and 10.2.0.5 is on extended support (if you have paid the extended support fees). Why not upgrade to 11gR2 ?
    HTH
    Srini

  • Upgraded from XI 3.0 to Pi.711 - greyed object

    Hi,
    we just upgraded from XI 3.0 to PI 7.11, in the scenario view i have now some greyed out object, when do a double click on them i'm getting the information that this object is not present.
    Why do these non-existant objects are now shown, and how gan i get rid of them? i tried to delete them, but still i'm getting the message that they are not in existance..
    Are these some kind of left overs? Entries in the scenarion table with no relationship to anything else?

    Hi Rainer,
    Check this thread: Not able to edit mapings in PI 7.1 after upgrade
    Thanks,

  • Upgrade from EBP 4.0 to SRM 5.0

    Hi y'all,
    We are thinking about upgrading from our current EBP 4.0 to SRM 5.0. We are only using EBP for the self-service procurement scenario - with a classic integration towards two different R/3 4.6C systems. We have no internal catalogs and it is very much a standard set-up
    Has anyone had some <b>experiences to share?</b>
    Will it be a "large" or a "small" upgrade?
    Are there any watchouts or learnings?
    Many thanks in advance
    Thyge

    hello Thyge,
    you are running on EBP 4.0, i.e. SRM 3.0: Extension of mainstream maintenance was extended from end of June 2006 to end of December 2006, at no extra fee.
    Requisite 4.0 will be supported to end of December 2006 (refer to SAP Note 485884 for detailed information on Requisite).
    That means that, excpet if you go in a custom support contract with SAP, your system will not be supported at end of 2006.
    So you must "be prepared" and do this upgrade in 2006 !!!
    If you don't use new features, have only 20 users, and a nearly standard SRM, you upgrade efforts will be really light:
    - technical upgrade (attention: new Oracle version required) Unicode version ?
    - nearly no custom dev alignement
    - light re-training
    The main workload would be the migration from Requisite to SAP CCM 2.0 (if you choose this option), depending on your actual content management strategy.
    I think a 3 months upgrade project will be the correct duration for you.
    Rgds
    Christophe

  • SRM Server 5.5 SP stack Upgrade from 14 to 17 ( 15 16  & 17)

    Dear Experts,
    We are on SRM 5.0, Server 5.5  Extended Classic Scenario
    We recently upgraded from SP 14 and now added 15, 16 and 17.
    While testing the plan driven scenario, for PR with material master we are getting the follwoing error:
    BBP_BC_EXTREQ_INB        ,      BBP_EXTREQ_TRANS    ,     Product ID is longer than the Customizing setting
    Please advice for resolution.
    Regards,
    Anil Rajpal
    Edited by: Anil anil on May 5, 2011 1:18 PM

    Study this SAP note for more understanding the issue with technical resource.. the give note is just clue and may not be a solution...since already you have higher version with updated sp(s)
    Are you geting this error for all the material transfer ? or some material only fails?
    Hope you must debug the queue on product length.
    Note 532286 - Error "Product ID longer than allowed in Customizing
    during SPAU analysis - did you ignore this ?
    but you must see this piece of code is overwritten by any other code
    Symptom
    During the transfer of external requirements from a planning system, the outbound queue can remaining hanging with the following error:
    Product ID is longer than allowed in Customizing.
    Other terms
    SRM, Supplier Relationship Management, Ecommerce, E-Commerce, BBP EBP, Enterprise Buyer professional edition, E-Buyer, E-Procurement, SAP Business-to-Business Procurement, external requirement, PM, Plant Maintenance, Content Integrator
    Reason and Prerequisites
    First check whether Note 530920 was implemented in your system.
    If the error still occurs nevertheless, the following situation might have occurred:
    1. The product ID was transferred with a length of 18 characters to the EBP System
    2. A product with this product ID exists in the EBP System, and therefore the product ID was converted into the internal 40-character format (with leading zeros) in the EBP System.
    3. Afterwards the attempt is made to determine the product GUID. However, this failed since there are several products with the same product ID in your system and the external demand came from a system from which you have not replicated the product master.
    4. Since no product GUID was found, the product is considered as an external product and the system checks whether the product ID matches the settings in Customizing. During this process, the error occurs that the 18-character product ID is not used from the back end system, but instead the product ID converted to the 40-character format in step 2. If you have set a maximum length smaller than 40 for the product ID in Customizing, it results in the above-mentioned error message
    Solution
    Implement the attached program correction.
    but i did not face this issue during our service pack upgrades...

Maybe you are looking for