Schedule a job with email destination in BOXI R2 with email format as html

Hello Guys, would it to possible to schedule a job with email destination in BOXI R2 with email format as html? we are able to get it running with plain text email format. we use Java SDK to interface with BO Enterprise servers.
thanks for your thoughts,
Venkat

Hi
your job should SMOF_DOWNLOAD can bring new material master if you set up correctly.
as a smart method smof_download is the best way.
doble check your filter condition. it should work as you expected. because we dont involve in  manual pulling...
check your variant once again. in vari table,
can you check r3ac1 - filter settings- source seetingsa--> source site nmae --> backendlogical system and filter sync..
br
Muthu

Similar Messages

  • Priority Setting with two separate DNS boxes working with one Xserve?

    Hi Admins,
    I am pondering over a DNS setup question here. There are 2 MacMini boxes, both running Mac OS X 10.6.2 server with the DNS services. Each of them are connected to two separate physical networks form two different ISPs. The key server ( Xserve ) is connected to the two ISPs through each of the ethernet interfaces. Once the boxes are live the traffic is always routed through the ISP # 2 ( originally a backup ISP and hence a lower bandwidth connection ) which times out the users and is very very slow. The primary ISP is the one with the higher bandwidth and needs the traffic routed through it at all times. Only when the ISP#1 is down, the ISP#2 should take over.
    Is there a way to prioritize one over the other. Currently I have the ISP#2 DNS box offline as it will otherwise gain priority and website page loads, mail and other key services will suffer. The registry entry with the domain seller has two dns entries for the the above two boxes.

    Is there a way to prioritize one over the other
    Sure - at least if I understand the question. Just change the order of the interfaces in System Preferences -> Network -> (gear wheel) -> Set Service Order.
    The interface nearest the top of the list will have priority, so set ISP1's link there. If that link goes down ISP2's link will automatically take over the traffic.
    This doesn't account for how users get to your network, of course - users may still try to connect via ISP#1's IP address, but that's a whole different kettle of fish.
    Note that this method is based purely on the link-level - as long as ISP#1's interface has a link the OS will prefer that link, even if the upstream connection is down. At that level your option is to have a script that periodically checks the ISP#1's link and changes the default route setting on the host to point to ISP#2's router address.

  • Schedule webi report to destination to Inbox AND send email notification

    I'm writing a new process that will schedule a webi report.  The output of the report needs to be delivered to multiple user's BO Inboxes AND an email notification (without the report attached) needs to be sent telling them that they have a new report to view in their Inbox.  Trying to mimic how this is done via CMC Schedule - Notification and Destination tabs.
    I can get it to deliver the report to the Inbox and I can get it to send an email seperately, but the problem I'm running into is that I can't get it to do both in the same process.  Here is the code snippet that I've written.  Any assistance would be appreciated.
    // Retrieve the managed plugin
    IInfoObjects managedInfoObjects = infoStore.query("Select SI_DEST_SCHEDULEOPTIONS, SI_PROGID From CI_SYSTEMOBJECTS Where SI_NAME = 'CrystalEnterprise.Managed'");
    IInfoObject infoObject = (IInfoObject)managedInfoObjects.get(0);
    IDestinationPlugin destinationPlugin = (IDestinationPlugin)infoObject;
    IManaged managed = (IManaged)destinationPlugin;
    // Set the destination to inbox
    IManagedOptions managedOptions = (IManagedOptions)managed.getScheduleOptions();
    managedOptions.setDestinationOption(IManagedOptions.CeDestinationOption.ceInbox);
    managedOptions.setSendOption(IManagedOptions.CeManagedSendOption.ceCopy);
    managedOptions.setIncludeInstance(true);
    managedOptions.getDestinations().add(new Integer(ditUserID1));
    managedOptions.getDestinations().add(new Integer(ditUserID2));
    managedOptions.getDestinations().add(new Integer(ditUserID3));
    scheduleInfo.getDestination().setFromPlugin(managed);
    // Retrieve the smtp plugin. to send email notification
    IInfoObjects smtpInfoObjects = infoStore.query("Select SI_DEST_SCHEDULEOPTIONS, SI_PROGID From CI_SYSTEMOBJECTS Where SI_PARENTID = 29 AND SI_NAME = 'CrystalEnterprise.Smtp'");
    IInfoObject smtpInfoObject = (IInfoObject)smtpInfoObjects.get(0);
    IDestinationPlugin smtpDestinationPlugin = (IDestinationPlugin)smtpInfoObject;
    // Set to email notification on success
    ISMTP smtp = (ISMTP)smtpDestinationPlugin;
    ISMTPOptions smtpOptions = (ISMTPOptions)smtp.getScheduleOptions();
    smtpOptions.setServerName("mailhost.XXXXX.net");
    smtpOptions.setPort(25);
    smtpOptions.setDomainName("XXXXX.com");
    smtpOptions.setSenderAddress("XXXXX.com");
    smtpOptions.setSubject("Indicative Data Update Reports");
    smtpOptions.getToAddresses().add("XXXXX.com");
    smtpOptions.setMessage("Test Message");
    smtpOptions.setSMTPAuthenticationType(CeSMTPAuthentication.NONE);
    scheduleInfo.getNotifications().getDestinationsOnFailure().add("New");
    scheduleInfo.getDestination().setFromPlugin(smtp);
    Edited by: Shannon Maret on Apr 21, 2009 7:02 PM

    One thing to keep in mind is that "scheduling to SMTP" is different from "scheduling with email notification", and it looks like you're conflating the two.  The ISchedulingInfo.getDestinations() is the access point for scheduling to SMTP and ISchedulingINfo.getNotifications() is the access point for scheduling with Notification.
    > scheduleInfo.getNotifications().getDestinationsOnFailure().add("New");
    You'd add the SI_PROGID of the SMTP Destination here, and work with the returned IDestination to set the destination parameters.
    Sincerely,
    Ted Ueda

  • We use our Iphones with the icloud to set up scheduling of jobs. Multiple phones share the same icloud for this purpose. We recently had a change in leadership. How do I completely delete the icloud account? Or do I just create a new one/forget old 1

    Multiple phones share one Icloud account. We use it to schedule jobs and crew leaders read the cloud to get the information of the job that needs to be done. However, we recently had a change of leadership and we think this person might have logged into or put our cloud on his phone to sabotage our business. I changed the password but that didn't fix the situation. I could put a job on the cloud with an old phone that was logged in with the old password and everyone with the new password would still see the job. I have since created a whole new cloud account which seems to have eliminated the "future" issue of sabotage however I would like to completely eliminate that old account...any advise?

    Everyone needs to go to Settings (or System Preferences)>iCloud and click 'Delete account' or 'Sign out' as applicable (it's the same thing). Then they can sign into the new account you have created and proceed from there. You can't actually delete the old account from the server but you can just ignore it.

  • When I attempt to send a text from the new iPad, a dialog box appears with the option to either sign in with Apple ID Password or Create New Account. I try signing in using my Apple ID password but IMessage informs me that email address cannot be verified

    When I attempt to send a text from the new iPad, a dialog box appears with the option to either sign in with Apple ID Password or Create New Account. I try signing in using my Apple ID password but IMessage informs me that email address cannot be verified because it is already in use ??? What am I doing wrong?

    settings -> iTunes & App Store
    click on apple ID listed there
    select Sign Out
    sign in with the proper account
    from then on, when the store ask for your password it should be with the correct ID

  • I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click. How do I get version 4 to do this? Thanks.

    I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click.
    How do I get version 4 to do this?
    Thanks.

    The new but not-ready-for-prime-time autocomplete method searches for matches that contain the entered text, not just ones that begin with the string. Your options are:
    1) type in longer strings that narrow the search
    2) use an add-on to search just the beginnings:
    https://support.mozilla.org/en-US/questions/1037469
    3) install an older version of TB:
    http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/

  • The "Apple ID Password box along with the keyboard keeps popping up on my iPad and stays there.  I have changed my email address on my iMac but my old one still remains on the iPad.  Also changed password.  Nothing works!  I can't use the iPad like this!

    The "apple ID Password" box along with the keyboard pops up when I turn the iPad on and it stays there.  I have changed my email address on my iMac and also changed my password.  The old email address is still on the iPad.  Anyway, I can't use the iPad because can't get the apple id password box to go away.  Thanks for any help!

    This is an older photo but the sleep and home buttons are still in the same place on all iPads. The home button is the round button at the bottom of the iPad and the sleep button is also called the on/off button and it is at the top right corner of the iPad.

  • Job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name

    Experts,
    Please help me out here,Am facing this issue while scheduling a job in BIPublisher.
    job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name
    Thanks,

    You are probably installing on a hardened machine.
    The "installation guide" says that if you are doing so, you need to create a file named libx11.so.4 and update your LD_LIBRARY_PATH (see http://docs.iplanet.com/docs/manuals/messaging/ims52/ig/unix/overview.htm)but:
    1- the library name is libX11.so.4 and
    2- for jre a common file is not enough, you need to install SUNWxwplt at least. This will install the library on /usr/openwin/lib.
    You can check the results running <server-root>/bin/base/jre/bin/jre
    Hope that helps and sorry about my poor english.

  • Good morning! i'd like to know why when I write an email in Mail, it creates numerous copies each second which fill the trash box. My email is set up with IMAP and is a gmail account. Thanks

    good morning! i'd like to know why when I write an email in Mail, it creates numerous copies each second which fill the trash box. My email is set up with IMAP and is a gmail account. Thanks

    Open Mail preferences and select Accounts then MailBox Behavior. You probably need to unclick the safe draft to server.

  • TS1389 Similar problem with our iPad.  Apps purchased with "old" USR name that is not an email address can not be updated.  Free Apps update OK, but purchased ones show box asking for the non-email USR ID which Apple no longer recognizes.  HELP

    Have tried to get Apple Tech Support and local Apple techs to deal with this problem to no avail.  Apple store "genius" throws up hands and says nothing can be done.  Root of the problem seems to be that the old non-email AppleID is stuck in their system creating a catch22 that it appears as the account purchasing Apps, then is not recognized as a valid ID, and then disallows any attempt to change it to a recognized email address.
    Consequence is that Apps appropriately purchased can not be updated.  Apple store advises us to delete them and repurchase, but this seems more Windowsian than Applian.  Any Ideas??

    Hello J_DougBC,
    Thank you for posting in the Apple Support Communities.  I found an article that addresses Apple IDs that are different than the Primary Email Address on the account.  You will need to go to https://appleid.apple.com/ to "Make your Apple ID and email address one and the same."
    If your Apple ID and primary email address do not match, or they match but the email address is unverified, you can edit them.
    1. Sign in to My Apple ID to manage your account information.
    2. If you want to add and verify an email address that matches your Apple ID, follow the dialog box that says "Make your Apple ID and email address one and the same." This will automatically unverify that email address from any other Apple ID for which it was previously verified.
    3. If you want to change your email address to one that does not match your Apple ID, click Edit next to your Primary Email Address. If this email address is already associated with another Apple ID, you will need to sign in with that Apple ID and delete it before you can add it to your preferred Apple ID.
    Note: If you have an @me.com or @mac.com Apple ID and primary email address, you cannot edit your primary email address once it has been verified. To change your @me.com or @mac.com primary email address to another email address, contact Apple Support for assistance.
    You can find the full article here:
    Associating and verifying email addresses with your Apple ID
    http://support.apple.com/kb/HE68
    I hope this helps get you back on track!
    Best,
    Sheila M.

  • How to deactivate *Schedule Background Job for Work Items with Errors* SWU3

    Hello Guys,
    Can any one tell me how do I DEACTIVATE Schedule Background Job for Work Items with Errors in sap workflow SWU3.
    Currently it is green which I don't want. I want to stop this service.
    Regards
    NK

    Hello,
    You could also just stop the job in tx SM37.
    But why would you want to do this? As a test?
    regards
    Rick Bakker
    hanabi technology

  • BI Scheduler Java Jobs not working with 11.1.1.6

    Hello,
    I wrote a scheduler java job following the documentation found here
    http://docs.oracle.com/cd/E14571_01/bi.1111/e10541/schedjavajob.htm#CJHCFIID
    It worked fine on OBIEE 11.1.1.3 and 11.1.1.5 but now i made a fresh installation of OBIEE 11.1.1.6.0 and it does't work anymore.
    When i try to run the job from job manager the nqscheduler.exe process starts taking 50% of CPU and nothing happens
    The steps i made after installing OBIEE are:
    1. copy the jar file in ORACLE_HOME\bifoundation\javahost\lib
    2. edit JavaHost configuration file
    <Scheduler>
    <Enabled>True</Enabled> <DefaultUserJarFilePath>E:\<ORACLE_HOME>\bifoundation\javahost\lib</DefaultUserJarFilePath>
    </Scheduler>
    Thanks in Advance,
    Jonni

    thanx this is the solution. With this construct
    <?xml version="1.0" encoding="UTF-8"?>
    <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:java="http://xml.apache.org/xalan/java" exclude-result-prefixes="java">
         <xsl:output method="html" indent="yes" encoding="iso-8859-1"/>
         <xsl:template match="/">
         <xsl:variable name="counter" select="java:java.util.Vector.new()"/>
         <xsl:variable name="temp1" select="java:add($counter,'1')"/>
         <xsl:variable name="temp2" select="java:add($counter,'2')"/>
         <xsl:variable name="temp3" select="java:add($counter,'3')"/>
         <xsl:variable name="temp4" select="$temp3"/>
         <xsl:value-of select="java:size($counter)"/>
         <xsl:value-of select="java:toString($counter)"/>
         </xsl:template>
    </xsl:stylesheet>
    at least the '3' is added to the vector.

  • When i open emails, the text is replaced with question marks and boxes

    i have a macbook pro and when i open email attatchments which are mainly bodys of text, the text is replaced with question marks in boxes, any ideas as to how to help this or even fix it completely!?

    It means the text is a font not supported by whatever you are using

  • I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

    I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

    Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
    OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
    Next, close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
    sudo atsutil databases -remove
    Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
    This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.

  • BOE XI 3.1 Adaptive Job Server Email Destination

    Hi Everyone,
    Does anyone know if there is a way to enable a secure transport protocol (like TLS) for email destinations on the AdaptiveJobServer?
    I was able to setup an email destination and schedule Webi reports successfully, but I was unable to find anything more secure.
    Thanks

    I didn't think that it was possible.  As far as implementation SMTP over TLS is a possibility although this means more SSL certificates to manage.
    Thanks,
    Steve

Maybe you are looking for