Schedule end date is not saved (BOE XI 3.1)

Hi,
During testing of this product I have set up some schedules to test various report formats, destinations, etc. but have naturally not wanted to fill up my destinations with test reports and so have selected an end date to my schedules. By default the end date is todays date plus ten years, so i amend this with the date picker to later on today or tomorrow and save the schedule. When i view the schedule from the History window i can see that my end date has been ignored and the default date is still in place.
I have tested this a number of times with the default BOE XI 3.1 and am in the process of installing Fix Pack 1.2 to see if this makes any difference.
Question: Is this a known issue and is there a resolution relating to this problem?
Thanks,
Mike

Answer: It seems that applying the Fix Pack 1.2 resolves this issue.
Mike

Similar Messages

Publishing Scheduled End Date is 1/1/0001 12:00:00 AM

I have a requirement to move pages out of the pages library when the Scheduled End Date is met. My thought was to create a simple workflow using SharePoint Designer 2013 that will run on creation and pause until the Scheduled End Time and then copy the item
to another library and then delete item from the pages library. Sounds simple enough but no matter what date is entered in the Scheduled End Date column the value is always '1/1/0001 12:00:00 AM'. I know this because I log the date as the
first step in the workflow.
Now the strange part is the pause until 'Schedule End Date' does work when a date is entered but I'm not sure why because it displays 1/1/0001 12:00:00 AM) when I log it...
The other requirement is if a Scheduled End Date is not entered add 10 days and then archive the page. I'm not sure how I can do this if the Scheduled End Date is always '1/1/0001 12:00:00 AM' I can not test against an empty date since the value is always
'1/1/0001 12:00:00 AM'.
Why is the Scheduled End Date always display '1/1/0001 12:00:00 AM'? I created both a SharePoint 2010 and 2013 workflow both with the same result.
I have verified that this does not occur in our SharePoint 2010 environment. Is this a configuration issue with our SharePoint 2013 environment?

Hi Dan,
Thanks for the reply but unfortunately the Scheduled End Date is always 1/1/0001 12:00:00 AM regardless of the date entered. The first step I do in the workflow is log the Scheduled End Date.
The strange thing is it works if all the workflow does is a 'Pause Until' then copy and delete. But I need to check and see if the Schedule End Date is empty and add 10 days to the create date....

Storage location Data is not saving in table MARD using BAPI method.

Hi Experts,
TABLES: T001L, "Storage Locations
        MARA, "General Material Data
        MAKT, "Material Descriptions
        MBEW, "Material Valuation
        MARC, "Plant Data for Material
        MARD. "Storage Location Data for Mate
DATA: BAPI_HEAD   LIKE BAPIMATHEAD, "MATERIAL
      BAPI_MAKT   LIKE BAPI_MAKT,    "Material Description
      BAPI_MARA1 LIKE BAPI_MARA,    "Client Data
      BAPI_MARAX LIKE BAPI_MARAX,
      BAPI_MARC1 LIKE BAPI_MARC,    "Plant View
      BAPI_MARCX LIKE BAPI_MARCX,
      BAPI_MBEW1 LIKE BAPI_MBEW,    "Accounting View
      BAPI_MBEWX LIKE BAPI_MBEWX,
      BAPI_MARD1 LIKE BAPI_MARD,    "Storage location
      BAPI_MARDX LIKE BAPI_MARDX,
      BAPI_RETURN LIKE BAPIRET2.
DATA: BEGIN OF INT_MAKT OCCURS 100.
        INCLUDE STRUCTURE BAPI_MAKT.
DATA: END OF INT_MAKT.
DATA: BEGIN OF INT_MAT OCCURS 100,
         WERKS(4),     "Plant
         LGORT(4),     "Storage location
         MTART(4),     "Material type
         MATNR(18),    "Material number
         MAKTX(40),     "Material description
         MATKL(9) ,    "Material group
         MBRSH(1),     "Industry sector
         MEINS(3),     "Base unit of measure
         GEWEI(3),     "Weight Unit
         SPART(2),     "Division
         EKGRP(3),     "Purchasing group
         VPRSV(1),     "Price control indicator
         STPRS(12),    "Standard price
         PEINH(3),     "Price unit
         SPRAS(2),     "Language key
         BKLAS(4),     "VALUATION CLASS
         VERPR TYPE VERPR_BAPI,    "MOVING PRICE
         BWTTY(1),     "Valuation Catogory
         MLAST(1),     "Price determination
         MLMAA(1),     "Material Ledger
         EKLAS(4),     "Valuation Class for sales order stock
         QKLAS(4),     "Valuation Class for Project Stock
         ZKPRS TYPE DZKPRS, "Future price
         ZKDAT TYPE DZKDAT, "Valid From Date
         BWPRS TYPE BWPRS, "Tax price 1
         BWPS1 TYPE BWPS1, "Tax price 2
         VJBWS TYPE VJBWS, "Tax price 3
         ABWKZ TYPE ABWKZ, "Devaluatin indicator
         BWPRH TYPE BWPRH, "Commercial price 1
         BWPH1 TYPE BWPH1, "Commercial price 2
         VJBWH TYPE VJBWH, "Commercial Price 3
         XLIFO(1),          "LIFO/FIFO revelant
         MYPOL(4),          "Pool no for LIFO
         MMSTA(2),          "Plant specific material status
         AUSME TYPE AUSME, "Unit of issue
         QMATA(6),          "Material Authorization group
         RBNRM(9),          "Catalog Profile
         WEBAZ TYPE WEBAZ, "Goods reciept processing time in days
         PRFRQ TYPE PRFRQ, "Recurring Insepction
         SSQSS(8),          "QM Control key
         QZGTP(4),          "Certificate Type
         QSSYS(4),          "Required QM system for vendor
       END OF INT_MAT.
DATA: V_MATNR TYPE MARA-MATNR.
SELECT-OPTIONS:
            PLANT    FOR MARC-WERKS OBLIGATORY MEMORY ID PLT,
            S_LGORT FOR MARD-LGORT MEMORY ID STL,
            MATERIAL FOR MARA-MATNR MEMORY ID MAT,
            MATLTYPE FOR MARA-MTART MEMORY ID MTY,
            DIVISION FOR MARA-SPART MEMORY ID DIV.
PARAMETERS: F_FILE LIKE RLGRAP-FILENAME
             DEFAULT 'C:\DATA\ZMATERIAL.XLS' MEMORY ID F_FILE,
GETDATA AS CHECKBOX, "Tick to download materials data to local harddisk
         UPDDATA AS CHECKBOX. "Tick to update date to Materials Master
IF GETDATA = 'X'.
   PERFORM DOWNLOAD_DATA.
   PERFORM DOWNLOAD_FILE.
ENDIF.
IF UPDDATA = 'X'.
   PERFORM UPLOAD_FILE.
   PERFORM UPDATE_MM.
ENDIF.
FORM DOWNLOAD_DATA.
SELECT * FROM MARC WHERE LVORM EQ ' '
                      AND WERKS IN PLANT
                      AND MATNR IN MATERIAL.
    CLEAR MARA.
    SELECT SINGLE * FROM MARA WHERE MATNR = MARC-MATNR.
    CHECK MATLTYPE.
    CHECK DIVISION.
    CLEAR MBEW.
    SELECT SINGLE * FROM MBEW WHERE MATNR = MARC-MATNR
                                AND BWKEY = MARC-WERKS.
    CLEAR MAKT.
    SELECT SINGLE * FROM MAKT WHERE SPRAS = 'EN'
                                AND MATNR = MARC-MATNR.
    CLEAR MARD.
    SELECT SINGLE * FROM MARD WHERE WERKS IN PLANT
                              AND   LGORT IN S_LGORT.
    WRITE:/ MARC-WERKS,    "Plant
            MARD-LGORT,    "Storage location
            MARA-MTART,    "Material type
            MARA-MATNR,    "Material number
            MARA-MATKL,    "Material group
            MARA-MBRSH,    "Industry sector
            MARA-MEINS,    "Base unit of measure
            MARA-GEWEI,    "Weight Unit
            MARA-SPART,    "Division
            MARC-EKGRP,    "Purchasing group
            MBEW-VPRSV,    "Price control indicator
            MBEW-STPRS,    "Standard price
            MBEW-PEINH,    "Price unit
            MBEW-BKLAS,    "VALUE CLASS
            MAKT-SPRAS,    "Language key
            MBEW-BKLAS,    "Valuation Class
            MBEW-VERPR,    "Moving price
            MAKT-MAKTX,    "Material description
            MBEW-BWTTY,    "Valutaion Catogorey
            MBEW-MLAST,    "Price Determination
            MBEW-MLMAA,    "Material Ledger
            MBEW-EKLAS,    "Valuation class for Sales order stock
            MBEW-QKLAS,    "Valutaion Class for Project Stock
            MBEW-ZKPRS,    "Future Price
            MBEW-ZKDAT,    "Valid From Date
            MBEW-BWPRS,    "Tax price 1
            MBEW-BWPS1,    "Tax price 2
            MBEW-VJBWS,    "Tax price 3
            MBEW-ABWKZ,    "Devaluatin indicator
            MBEW-BWPRH,    "Commercial price 1
            MBEW-BWPH1,    "Commercial price 2
            MBEW-VJBWH,    "Commercial Price 3
            MBEW-XLIFO,    "LIFO/FIFO revelant
            MBEW-MYPOL,    "Pool no for LIFO
            MARC-MMSTA,    "Plant specific material status
            MARC-AUSME,    "Unit of issue
            MARC-QMATA,    "Material Authorization group
            MARA-RBNRM,    "Catalog Profile
            MARC-WEBAZ,    "Goods reciept processing time in days
            MARC-PRFRQ,    "Recurring Insepction
            MARC-SSQSS,    "QM Control key
            MARC-QZGTP,    "Certificate Type
            MARC-QSSYS.    "Required QM system for vendor
            INT_MAT-WERKS = MARC-WERKS.    "Plant
            INT_MAT-LGORT = MARD-LGORT.    "Storage Location
            INT_MAT-MTART = MARA-MTART.    "Material type
            INT_MAT-MATNR = MARA-MATNR.    "Material number
            INT_MAT-MAKTX = MAKT-MAKTX.    "Material description
            INT_MAT-MATKL = MARA-MATKL.    "Material group
            INT_MAT-MBRSH = MARA-MBRSH.    "Industry sector
            INT_MAT-MEINS = MARA-MEINS.    "Base unit of measure
            INT_MAT-GEWEI = MARA-GEWEI.    "Weight Unit
            INT_MAT-SPART = MARA-SPART.    "Division
            INT_MAT-EKGRP = MARC-EKGRP.    "Purchasing group
            INT_MAT-VPRSV = MBEW-VPRSV.    "Price control indicator
            INT_MAT-STPRS = MBEW-STPRS.    "Standard price
            INT_MAT-PEINH = MBEW-PEINH.    "Price unit
            INT_MAT-SPRAS = MAKT-SPRAS.    "Language key
            INT_MAT-BKLAS = MBEW-BKLAS.    "VALVATION CLASS
            INT_MAT-VERPR = MBEW-VERPR.    "MOVING price
            INT_MAT-BWTTY = MBEW-BWTTY.    "Valutaion Catogorey
            INT_MAT-MLAST = MBEW-MLAST.    "Price Determination
            INT_MAT-MLMAA = MBEW-MLMAA.    "Material Ledger
            INT_MAT-EKLAS = MBEW-EKLAS.    "Valuation class forS.O Stock
            INT_MAT-QKLAS = MBEW-QKLAS.    "Valutaion Class for Project
            INT_MAT-ZKPRS = MBEW-ZKPRS.    "Future Price
            INT_MAT-ZKDAT = MBEW-ZKDAT.    "Valid From Date
            INT_MAT-BWPRS = MBEW-BWPRS.    "Tax price 1
            INT_MAT-BWPS1 = MBEW-BWPS1.    "Tax price 2
            INT_MAT-VJBWS = MBEW-VJBWS.    "Tax price 3
            INT_MAT-ABWKZ = MBEW-ABWKZ.    "Devaluatin indicator
            INT_MAT-BWPRH = MBEW-BWPRH.    "Commercial price 1
            INT_MAT-BWPH1 = MBEW-BWPH1.    "Commercial price 2
            INT_MAT-VJBWH = MBEW-VJBWH.    "Commercial Price 3
            INT_MAT-XLIFO = MBEW-XLIFO.    "LIFO/FIFO revelant
            INT_MAT-MYPOL = MBEW-MYPOL.    "Pool no for LIFO
            INT_MAT-MMSTA = MARC-MMSTA.    "Plant specific material
            INT_MAT-AUSME = MARC-AUSME.    "Unit of issue
            INT_MAT-QMATA = MARC-QMATA.    "Material Authorization group
            INT_MAT-RBNRM = MARA-RBNRM.    "Catalog Profile
            INT_MAT-WEBAZ = MARC-WEBAZ.    "Goods reciept processing
            INT_MAT-PRFRQ = MARC-PRFRQ.    "Recurring Insepction
            INT_MAT-SSQSS = MARC-SSQSS.    "QM Control key
            INT_MAT-QZGTP = MARC-QZGTP.    "Certificate Type
            INT_MAT-QSSYS = MARC-QSSYS.    "Required QM system for
            APPEND INT_MAT.
            CLEAR INT_MAT.
ENDSELECT.
ENDFORM.
FORM DOWNLOAD_FILE.
call function 'WS_DOWNLOAD'
EXPORTING
    FILENAME                      = F_FILE
    FILETYPE                      = 'DAT'
FILETYPE                      = 'WK1'
tables
    data_tab                      = INT_MAT
EXCEPTIONS
    FILE_OPEN_ERROR               = 1
    FILE_WRITE_ERROR              = 2
    INVALID_FILESIZE              = 3
    INVALID_TYPE                  = 4
    NO_BATCH                      = 5
    UNKNOWN_ERROR                 = 6
    INVALID_TABLE_WIDTH           = 7
    GUI_REFUSE_FILETRANSFER       = 8
    CUSTOMER_ERROR                = 9
    OTHERS                        = 10.
IF SY-SUBRC = 0.
   FORMAT COLOR COL_GROUP.
   WRITE:/ 'Data Download Successfully to your local harddisk'.
   SKIP.
ENDIF.
ENDFORM.
FORM UPLOAD_FILE.
call function 'WS_UPLOAD'
EXPORTING
    FILENAME                      = F_FILE
    FILETYPE                      = 'DAT'
FILETYPE                      = 'WK1'
tables
    data_tab                      = INT_MAT
EXCEPTIONS
    FILE_OPEN_ERROR               = 1
    FILE_WRITE_ERROR              = 2
    INVALID_FILESIZE              = 3
    INVALID_TYPE                  = 4
    NO_BATCH                      = 5
    UNKNOWN_ERROR                 = 6
    INVALID_TABLE_WIDTH           = 7
    GUI_REFUSE_FILETRANSFER       = 8
    CUSTOMER_ERROR                = 9
    OTHERS                        = 10.
IF SY-SUBRC = 0.
   FORMAT COLOR COL_GROUP.
   WRITE:/ 'Data Upload Successfully from your local harddisk'.
   SKIP.
ENDIF.
ENDFORM.
FORM UPDATE_MM.
LOOP AT INT_MAT.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
    INPUT              = INT_MAT-MATNR
IMPORTING
   OUTPUT             = INT_MAT-MATNR
EXCEPTIONS
LENGTH_ERROR       = 1
OTHERS             = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Header
    BAPI_HEAD-MATERIAL        = INT_MAT-MATNR.
    BAPI_HEAD-IND_SECTOR      = INT_MAT-MBRSH.
    BAPI_HEAD-MATL_TYPE       = INT_MAT-MTART.
    BAPI_HEAD-BASIC_VIEW      = 'X'.
    BAPI_HEAD-PURCHASE_VIEW   = 'X'.
    BAPI_HEAD-ACCOUNT_VIEW    = 'X'.
Material Description
    REFRESH INT_MAKT.
    INT_MAKT-LANGU           = INT_MAT-SPRAS.
    INT_MAKT-MATL_DESC       = INT_MAT-MAKTX.
    APPEND INT_MAKT.
Client Data - Basic
    BAPI_MARA1-MATL_GROUP     = INT_MAT-MATKL.
    BAPI_MARA1-BASE_UOM       = INT_MAT-MEINS.
    BAPI_MARA1-UNIT_OF_WT     = INT_MAT-GEWEI.
    BAPI_MARA1-DIVISION       = INT_MAT-SPART.
    BAPI_MARAX-MATL_GROUP = 'X'.
    BAPI_MARAX-BASE_UOM   = 'X'.
    BAPI_MARAX-UNIT_OF_WT = 'X'.
    BAPI_MARAX-DIVISION   = 'X'.
Plant - Purchasing
    BAPI_MARC1-PLANT      = INT_MAT-WERKS.
    BAPI_MARC1-PUR_GROUP = INT_MAT-EKGRP.
    BAPI_MARC1-PUR_STATUS = INT_MAT-MMSTA.
    BAPI_MARC1-ISSUE_UNIT = INT_MAT-AUSME.
    BAPI_MARC1-QM_AUTHGRP = INT_MAT-QMATA.
    BAPI_MARC1-GR_PR_TIME = INT_MAT-WEBAZ.
    BAPI_MARC1-INSP_INT   = INT_MAT-PRFRQ.
    BAPI_MARC1-CTRL_KEY   = INT_MAT-SSQSS.
    BAPI_MARC1-CERT_TYPE = INT_MAT-QZGTP.
    BAPI_MARC1-QM_RGMTS   = INT_MAT-QSSYS.
    BAPI_MARCX-PLANT      = INT_MAT-WERKS.
    BAPI_MARCX-PUR_GROUP = 'X'.
    BAPI_MARCX-PUR_STATUS = 'X'.
    BAPI_MARCX-ISSUE_UNIT = 'X'.
    BAPI_MARCX-QM_AUTHGRP = 'X'.
    BAPI_MARCX-GR_PR_TIME = 'X'.
    BAPI_MARCX-INSP_INT   = 'X'.
    BAPI_MARCX-CTRL_KEY   = 'X'.
    BAPI_MARCX-CERT_TYPE = 'X'.
    BAPI_MARCX-QM_RGMTS   = 'X'.
Accounting 1
    BAPI_MBEW1-VAL_AREA      = INT_MAT-WERKS.
    BAPI_MBEW1-PRICE_CTRL    = INT_MAT-VPRSV.
    BAPI_MBEW1-STD_PRICE     = INT_MAT-STPRS.
    BAPI_MBEW1-PRICE_UNIT    = INT_MAT-PEINH.
    BAPI_MBEW1-MOVING_PR     = INT_MAT-VERPR.
    BAPI_MBEW1-VAL_CLASS     = INT_MAT-BKLAS.
    BAPI_MBEW1-VAL_CAT       = INT_MAT-BWTTY.
    BAPI_MBEW1-ML_SETTLE     = INT_MAT-MLAST.
    BAPI_MBEW1-ML_ACTIVE     = INT_MAT-MLMAA.
    BAPI_MBEW1-VM_SO_STK     = INT_MAT-EKLAS.
    BAPI_MBEW1-VM_P_STOCK    = INT_MAT-QKLAS.
    BAPI_MBEW1-FUTURE_PR     = INT_MAT-ZKPRS.
    BAPI_MBEW1-VALID_FROM    = INT_MAT-ZKDAT.
*ACCOUNTING 2
   BAPI_MBEW1-TAXPRICE_1    = INT_MAT-BWPRS.
   BAPI_MBEW1-TAXPRICE_2    = INT_MAT-BWPS1.
   BAPI_MBEW1-TAXPRICE_3    = INT_MAT-VJBWS.
   BAPI_MBEW1-DEVAL_IND     = INT_MAT-ABWKZ.
   BAPI_MBEW1-COMMPRICE1    = INT_MAT-BWPRH.
   BAPI_MBEW1-COMMPRICE2    = INT_MAT-BWPH1.
   BAPI_MBEW1-COMMPRICE3    = INT_MAT-VJBWH.
   BAPI_MBEW1-LIFO_FIFO     = INT_MAT-XLIFO.
   BAPI_MBEW1-POOLNUMBER    = INT_MAT-MYPOL.
    BAPI_MBEWX-VAL_AREA   = INT_MAT-WERKS.
    BAPI_MBEWX-PRICE_CTRL = 'X'.
    BAPI_MBEWX-STD_PRICE = 'X'.
    BAPI_MBEWX-PRICE_UNIT = 'X'.
    BAPI_MBEWX-MOVING_PR = 'X'.
    BAPI_MBEWX-VAL_CLASS = 'X'.
    BAPI_MBEWX-VAL_CAT       = 'x'.
    BAPI_MBEWX-ML_SETTLE     = 'X'.
    BAPI_MBEWX-ML_ACTIVE     = 'X'.
    BAPI_MBEWX-VM_SO_STK     = 'X'.
    BAPI_MBEWX-VM_P_STOCK    = 'X'.
    BAPI_MBEWX-FUTURE_PR     = 'X'.
    BAPI_MBEWX-VALID_FROM    = 'X'.
   BAPI_MBEWX-TAXPRICE_1    = 'X'.
   BAPI_MBEWX-TAXPRICE_2    = 'X'.
   BAPI_MBEWX-TAXPRICE_3    = 'X'.
   BAPI_MBEWX-DEVAL_IND     = 'X'.
   BAPI_MBEWX-COMMPRICE1    = 'X'.
   BAPI_MBEWX-COMMPRICE2    = 'X'.
   BAPI_MBEWX-COMMPRICE3    = 'X'.
   BAPI_MBEWX-LIFO_FIFO     = 'X'.
   BAPI_MBEWX-POOLNUMBER    = 'X'.
*Storage Locations
    BAPI_MARD1-PLANT      = INT_MAT-WERKS.
    BAPI_MARD1-STGE_LOC   = INT_MAT-LGORT.
    BAPI_MARDX-PLANT      = INT_MAT-WERKS.
    BAPI_MARDX-STGE_LOC   = INT_MAT-LGORT.
   WRITE:/ BAPI_HEAD-MATERIAL, BAPI_MARC1-PLANT ,BAPI_MARD1-STGE_LOC.
    call function 'BAPI_MATERIAL_SAVEDATA'
      exporting
        HEADDATA                   = BAPI_HEAD
        CLIENTDATA                 = BAPI_MARA1
        CLIENTDATAX                = BAPI_MARAX
        PLANTDATA                  = BAPI_MARC1
        PLANTDATAX                 = BAPI_MARCX
      FORECASTPARAMETERS         =
      FORECASTPARAMETERSX        =
      PLANNINGDATA               =
      PLANNINGDATAX              =
<b>      STORAGELOCATIONDATA        = BAPI_MARD1
       STORAGELOCATIONDATAX       = BAPI_MARDX</b>
        VALUATIONDATA              = BAPI_MBEW1
        VALUATIONDATAX             = BAPI_MBEWX
      WAREHOUSENUMBERDATA        =
      WAREHOUSENUMBERDATAX       =
      SALESDATA                  = BAPI_MVKE1
      SALESDATAX                 = BAPI_MVKEX
      STORAGETYPEDATA            =
      STORAGETYPEDATAX           =
      IMPORTING
        RETURN                     = BAPI_RETURN
      TABLES
        MATERIALDESCRIPTION        = INT_MAKT
      UNITSOFMEASURE             =
      UNITSOFMEASUREX            =
      INTERNATIONALARTNOS        =
      MATERIALLONGTEXT           =
      TAXCLASSIFICATIONS         =
      RETURNMESSAGES             =
      PRTDATA                    =
      PRTDATAX                   =
      EXTENSIONIN                =
      EXTENSIONINX               =
IF BAPI_RETURN-TYPE = 'E'.
   WRITE:/ 'Error Message ', BAPI_RETURN-MESSAGE.
ENDIF.
ENDLOOP.
ENDFORM.
<b>i am using this bapi method to copy materials from one plant to another plant using storage location so here what happenig is everyting is going correct but only the storage location data is not saving in table mard so any body faced this kind of problem please tell me.... and one more dbt
bapi_marcx-pur_status = 'x' what is 'X' here??? is that mandatory field or required field ???
points wil be rewarded.
reagrds,
sunil k airam.

In the HEADDATA structure, STORAGE_VIEW should also be set as 'X' , in order to update storage location data
for example
BAPI_HEAD-STORAGE_VIEW = 'X'.
Also, PUR_STATUS corresponds to field MARA-MSTAE whose domain has value table T141, therefore values in the field are checked against T141
Edited by: Harris Veziris on May 12, 2008 12:37 PM

How to use Schedule End Date in work flow

I want the delete pages from Page library after the “Schedule End Date” is reached.
I used workflow, but the “Schedule End Date” column values always returns 1/1/1000 in workflow.
I am unable to get the actual “Schedule End Date” value form the pages.
Any help
with Regards Sivam

Hi Siva 2013,
I made a test in my environment and I reproduce your issue.
By default, it is a hidden field. I make the field unhidden using SharePoint Manager. I set the field with a specific value, and I create a workflow to log the value. But, it always show "0001/01/01".
As a workaround, I suggest you can filter the items using CAML Query and delete them using Client Object Model.
I suggest you can filter the items using CAMLDesign.
More information:
Client Object Model:
http://msdn.microsoft.com/en-us/library/office/ee539976(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/office/ee534956(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/office/fp179912(v=office.15).aspx
CamlDesign:
http://www.camldesigner.com/
Best Regards
Zhengyu Guo
TechNet Community Support

Data form not saving enter data after hit of submit

Hi,
Entered data on Data from not saving after hitting the submit button in smartview.
A rules is attached to the same data from and its running on save, after retrieve it's not display enter data.
it's urgent, please help.
Regards

You need to have the below updates done on the affected PC.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings]\
"ReceiveTimeout"=00dbba00 (hexadecimal)
"KeepAliveTimeout"=300000 (decimal)
"ServerInfoTimeout"=300000 (decimal)
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]\
"ReceiveTimeout"=00dbba00 (hexadecimal)
"KeepAliveTimeout"=300000 (decimal)
"ServerInfoTimeout"=300000 (decimal)
if its windows 7 machine the same key has to be added under wow6432node under same path.
once the changes are done reboot the machine and try launching the BR. Hope it works !!!
Thanks
Amith

How to extract the data from the chart. Data were not saved

Hi everyone. Beginners question, but could not find an answer to it
How can I get the numerical data from the chart. Chart is already on the screen and data vere not saved into file during VI run. All I have - just chart, but I need numbers
Thanks
Message Edited by olka on 07-18-2007 09:41 AM

You can still do it, the process just changes a bit...
Copy the control to a new VI as before, and change it into a control.
Create the diagram shown in the attached screen shot.
Run the new VI. You will get two arrays: one of x-axis values and one of y-axis values.
Mike...
Message Edited by mikeporter on 07-18-2007 12:21 PM
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
extracting xy data.JPG ‏5 KB

HELP: Formula Item data is not saved to database

Hi:
I've added a formula in a database item but when i commit the form the data is not saved to the database. When i am working on form the item reflects the formula value, but when i commit the value is not stored in the database.
I need urgent help.
Thanks
Joao Oliveira

It is not clearly stated in the help file I agree. With a little PLSQL code you could copy the item to a hidden database field and have it be saved to the database. See Note 43012.1 on Metalink for details.

End date should not less than Start date, else CLEAR it

Hello
I put CONTRACT START DATE and CONTRACT END DATE fields on the form. These 2 objects (Date/Time objjects) i pulled them from Satndard tab of pallette and dropped on my layout page design, fine.
Now, am trying to put a validation that the end dat eshould not lower than start date, so, i got a thread as below from Niall,
http://forums.adobe.com/message/1909551
and i did my FormCalc coding under EXIT event of END DATE field as below,
// Pls. note this FormCalc
// End date should not less than Start date, else CLEAR it - Begin
var stDate
var endDate
stDate = xfa.resolveNode("CUSTOMER.Page31_Contracts.Con_Whole_Page.CON_Basic_Info.CON_START_DATE") .rawValue
endDate = xfa.resolveNode("CUSTOMER.Page31_Contracts.Con_Whole_Page.CON_Basic_Info.CON_END_DATE").r awValue
if (stDate > endDate) then
    xfa.host.messageBox("End date is lower than Start date! End date is cleared")
    xfa.resolveNode("CUSTOMER.Page31_Contracts.Con_Whole_Page.CON_Basic_Info.CON_END_DATE").r awValue = null
endif
// End date should not less than Start date, else CLEAR it - End
I tried in VALIDATE, CALCULATE, CHANGE events of END DATE, but nothing working!!
PLs. let me kow how can i achieve my requirement? I am anewbie,
Thank you

If you use the exit event, you will probably have to have the same code on both the start and end date fields since they have a dependancy on each other. Maybe better to try the validate event of the end date so that if either field is changed the event gets fired. You can try the following for validate event
// Pls. note this FormCalc
// End date should not less than Start date, else CLEAR it - Begin
var stDate
var endDate
stDate = CON_START_DATE.rawValue
endDate = $.rawValue
if ( HasValue(endDate) ) then
    if (stDate > endDate) then
        xfa.host.messageBox("End date is lower than Start date! End date is cleared")
        $.rawValue = null
    endif
endif
1
// End date should not less than Start date, else CLEAR it - End

Contract End date should not less than Start date, else CLEAR it

Hello
I put CONTRACT START DATE and CONTRACT END DATE fields on the form. These 2 objects (Date/Time objjects) i pulled them from Satndard tab of pallette and dropped on my layout page design, fine.
Now, am trying to put a validation that the end dat eshould not lower than start date, so, i got a thread as below from Niall,
http://forums.adobe.com/message/1909551
and i did my FormCalc coding under EXIT event of END DATE field as below,
// Pls. note this FormCalc
// End date should not less than Start date, else CLEAR it - Begin
var stDate
var endDate
stDate = xfa.resolveNode("CUSTOMER.Page31_Contracts.Con_Whole_Page.CON_Basic_Info.CON_START_DATE") .rawValue
endDate = xfa.resolveNode("CUSTOMER.Page31_Contracts.Con_Whole_Page.CON_Basic_Info.CON_END_DATE").r awValue
if (stDate > endDate) then
xfa.host.messageBox("End date is lower than Start date! End date is cleared")
xfa.resolveNode("CUSTOMER.Page31_Contracts.Con_Whole_Page.CON_Basic_Info.CON_END_DATE").r awValue = null
endif
// End date should not less than Start date, else CLEAR it - End
I tried in VALIDATE, CALCULATE, CHANGE events of END DATE, but nothing working!!
PLs. let me kow how can i achieve my requirement? I am anewbie,
Thank you

http://forums.adobe.com/message/4264933#4264933

Validity end date is not getting copied from inquiry to quotation.

Hi Friends,
While creating quotation the validity end date is not getting copied from inquiry to quotation.
What setting needs to be done, pl suggest.
Regards,
Hari.

Sreehari,
i dont find any logic of having Same validity date for Quotation and Inquiry....
the simple reason is explained by example: Say you have created Inquiry on 1st november and end date is 15th novembr. Customer comes to you on 14th november and asked for Quotation, and if you refer quotation on that day that means its only applicable for one day, which generally wont be the case.
There is no option for copying the validity dates from Inquiry to Quotation as per standard. If you want, create routine, place it in copy control.
Thanks,
raja

When i attach workflow to document library, the custom columns data is not saving.

Hi, i had created SharePoint designer workflow (send Email) for Document Library.
I had created Custom columns like.
"Employee Name" of type Person or Group
"Resume Type" of type Choice
When i attach my workflow to document library, the columns data is not saved.
It is just uploading resume, and sends email to the user groups, but data is not saved for custom columns. !.e "Employee Name" and "Resume Type".
Any help will be appreciated.

In SharePoint Document Library, first the document will be uploaded and then the metadata will be updated. So, in your workflow settings, select start workflow when item is changed instead of item is created and then try.

The data is not saved in one of the LOV field

Hi all,
I have two forms in two different pages, both are pretty much identical, except here and there show/hide some of the field and different LOV values. One of the form is working fine, but other form is giving me trouble. There is an LOV in that form, giving and returning proper value. (I checked it with java script alert). But it is not saving in the database. I tried to upload the files to the OTN, but since i could not upload the whole application because of data complexity, I am not able to successfully upload that into the application. (But it is in the Export Repository). As far as I checked, I copied the working form page into not working form page and make the necessary changes. I did not change any property specifically to that field. Any idea what I should be looking into. Thanks.
Soe

Hi Andy,
Thank you very much for your response. I tried what you have suggested. But still it was not working. But what I found out was it is not displaying what I have selected after I press "Save". But it actually saved in the database. So, I kind of getting a little confuse and do more research why it is doing that. Finally I found out the problem is with the datatype. First form has two characters in the return value and this page has only one character. I used CHAR(2) as the datatype for that field and turned out it is appending space at the end since it has only one character. For that I do not see anything on the screen. I changed the datatype to VARCHAR2 and now the problem resolved. Thank you once again for your time.
Soe

Data gets not saved?

Hi
i am new at programming and also i am dutch so my english is not that high quality. sorry for that.
reading is a lot better than writing ;)
So here is my problem (i use visualstudio 2013 express)
my goal is to design a desktop app that keeps track of rented tv`s and Phones in a care home. (place where old people live)
i made 2 forms and 1 local database.
form1;
Public Class main
Private Sub AddTvToolStripMenuItem_Click(sender As Object, e As EventArgs) Handles AddTvToolStripMenuItem.Click
add.Show()
End Sub
Private Sub main_Load(sender As Object, e As EventArgs) Handles MyBase.Load
End Sub
End Class
form2;
Public Class add
Private Sub TelevisieBindingNavigatorSaveItem_Click(sender As Object, e As EventArgs) Handles TelevisieBindingNavigatorSaveItem.Click
Me.Validate()
Me.TelevisieBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.Database1DataSet)
End Sub
Private Sub add_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'Database1DataSet.Televisie' table. You can move, or remove it, as needed.
Me.TelevisieTableAdapter.Fill(Me.Database1DataSet.Televisie)
End Sub
Private Sub TelevisieDataGridView_CellContentClick(sender As Object, e As DataGridViewCellEventArgs) Handles TelevisieDataGridView.CellContentClick
End Sub
Private Sub TelevisieBindingNavigator_RefreshItems(sender As Object, e As EventArgs) Handles TelevisieBindingNavigator.RefreshItems
End Sub
End Class
now the problem is, when i debug all is working ok
it gives no errors, all data shows i can add and remove data etc. But when i close the main form (form1) and restart debug
it has lost all changes. so it is not saving the data. earlier when i had just 1 form it did. and i cant figer out why?
greets masters.

But when i close the main form (form1) and restart debug it has lost all changes. so it is not saving the data. earlier when i had just 1 form it did. and i cant figer out why?
That is correct. The data that you are using for debug should be the same each time you start a debugging session. If it changes, you can't compare one debug session with the next, so you can't know what effect your code changes have had.
Also, if there are errors in your code, you do not want invalid or incorrect data being stored into your database.
You can see some discussion of how to use data for debugging here:
https://msdn.microsoft.com/en-us/library/ms246989.aspx

Why typed in data is not saved in adobe form ?

Hello Experts
This is someone new to adobe interactive forms in SAP. I develoveloped many intearcative forms their look and fell is good but problem is that the data typed in the adobe form is not saved .when i save the adobe form with nevigation File -> Save as ->pdf. the file is save with new name but the filled in data is lost. Please
help me in this scenario.
Thanks.
Chitta Ranjan Mahato.

You can save the filled form when you enable the form with Adobe Acrobat.

Data is not saved in the Real time Cube

Hi all,
After designing the layout in BPS ,when i enter the plan data in the layout (T CODE - UPXPM ),The plan data is not getting saved in cube .i have chosen the type of layout as Excel based.
    Please make me clear where the problem occurs.
Thanks
Siva

Hi Siva,
   Check the below link:
[Re: BPS & INTEGRATED PLANING]
       Hope this helps you.
Regards,
Yokesh.

Schedule end date is not saved (BOE XI 3.1)

Similar Messages

Maybe you are looking for