Schedule for Multicast enabling

Does anyone have or know where to find a schedule for the enabling of Multicast on exchanges? I know we can check the ADSL checker on the Wholesale site which may give a date, but at the moment, those of us without a date on that checker have no way of knowing when their exchange is going to go to Multicast. It seems that some people are now seeing 1st of April for Multicast availability on their exchanges, so there is a schedule, it's just that we aren't being told anything past the next 6 weeks.
I'd like to stick with BT if I can, as for me it's more cost effective than the Sky or Virgin alternative. But I can't keep waiting month on month for the exchange to go multicast so that I can receive the Sports channels next Rugby season if it's going to be some time into Q4 '13 or Q1 '14, and I've yet to see anything that tells me it isn't going to take that long for my exchange to be multicast. At some point close to the start of the season, I'll have to make a choice as to whether to jump ship or not...

I have searched for such a schedule. There isn't one publicly available.
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Similar Messages

Error while scheduling for user

Hi All Experts,
I tried to schedule a report for User1 in CMC (logged on as Administrator). But it failed with error "User does not have right "Edit Object""
I checked User1 belongs to Administrators and Everyone Group. So I changed the security for Everyone (enable Edit Object right). But the scheduling still failed.
Could anyone help?
Thanks~

I send the report from Admin to User1's inbox.
But User1 can't copy it to favorite folder...Error: Sorry you do not have right "View Object"
I checked Everyone group. I added the view object right already....

RELEASE NOTES R180 - scheduled for September 25th 2012

We are announcing a new Business Catalyst release, scheduled to go live on Tuesday, September 25th.
This release includes some great improvements to our module templates, new features for our email marketing system, admin interface improvements, a few infrastructure updates and lots of bug corrections.
Read through the following sections to get detailed information about this release:
Features and enhancements
Issues fixed by this release
You can jump to the corresponding section by clicking the above links.
Features and enhancements
Modules improvement
Starting with our September release, we have enabled users to use a html page or a static template as a module list template (layout) for all modules that are using templates today. The new addition allows partners to create different views for the same data for a personalize experience. To use this new functionality, just create a new module template and update your module properties by specifying the template to use.
Ex: {module_blogsitepost,2 template="/ModuleTemplates/Custom/MyTemplate.tpl"}
Note: although you can use any extension you feel comfortable with, we recommend using a .tpl extension for two reasons: help locate the template better and avoid having these templates being displayed in Page list.
Email marketing application improvements
This is release is packed with new features and enhancements to our email marketing system.
Dynamic modules in email campaign - you can include modules (a subset of 19 modules) in the Email Campaigns content; the system will render these modules right before the campaign is sent, making sure your customers always receive the latest content;
Fresh, new email templates - the release includes a set of new of new email templates that look much better; along with these new templates, the template selection page was re-done to show better thumbnails;
Improved recipients selection - we have improved the recipients wizard step, replacing the checkbox list with a smart search and select control; additionally, with this release you will be able to select multiple lists (including Customer Reports) to exclude from your campaign.
Improved campaign status screen - before sending the campaign, you will now be able to view the exact number of recipients before sending the campaign (Note: reports and list requiring a long time to compute will be approximated); additionally, while the campaign is sending, we are displaying a meaningful status, that indicates that the campaign is being sent.
Email clients reporting - the campaign report screen has also been improved to include a report showing you the email clients used to read your campaigns.
Admin console improvements
We have updated our new admin user interface and replaced the insert module and insert tag panels with the new Business Catalyst toolbox almost everywhere. With the new toolbox we'll make it easier for partners and business owners to insert and customize module or tags into pages, templates or system emails. The toolbox user interface will opened by default for partners for faster access to tags and modules.
Other changes
Some FTP improvements (better error codes, performance, etc) and SFTP support
DNS improvements (support for setting up Google Apps email out of the box, several bug fixes)
When you change your email address on adobe.com, it syncs automatically with BC
Various improvements of the caching engine for static assets
Issues fixed by May release
Issue 2869695 - Fixed an issue that broke the comments submitted by visitors by placing tags after a random number of characters;
Issue 3317538 - Fixed an issue preventing the social media modules from being reinitialized after pressing "Add to cart"
Issue 3317105 - Files with spaces in the name do not get invalidated properly on FTP/API delete
Issue 3317478 - Fixed an issue causing hardcoded http paths to generate security alerts when on https
Issue 2567045 - Fixed an issue with Product Purchased with Details data field
Issue 2567131 - Fixed an issue causing web app creation forms to generate [No Name] duplicates
Issue 3319245 - Fixed the search function on Help & Support
Issue 3320623 - Fixed an issue causing decimal prices to be incorrectly saved when editing/creating an order in admin and having the site admin language set to a country language that uses "," as decimal separator instead of "."
Issue 3325526 - Fixed an issue causing the CRM Session verification to fail for session IDs that contain +
Issue 3162093 - Fixed a problem [AdminV4] HTML files for campaigns can't be edited
Issue 3009528 - Updated multiline fields to allow line breaks
Issue 3010606 - Changed FTP blog layouts listing to properly handle cases of invalid layout group names
Issue 3315646 - Fixed an issue causing {tag_blogcategorylist}to not limit the number of results as set
Issue 3316323 - Small bug/improvement at offline payments on copy/pasting the PDF password
Issue 2900590 - Fixed an issue causing a correct web app item address to change to another one on some sites
Issue 3319299 - Fixed some performance problems causing Edit Web Apps Settings -> Autoresponder interface to freeze
Issue 3320422 - "Free shipping" not validated when enforcing shipping validation
Issue 2918069 - Cannot save values properly for webapp items when the custom field uses comma separated checkbox list, and it has more then 265 characters for the list of values
Issue 2925458 - Web App edit form is adding "X_" to the existing classes inside the description field. Every edit will add another x_ ending up in something like class="x_x_x_classname"
Issue 2567035 - Can not list files in FTP when there are invalid characters or similar in the directory
Issue 3313655 - Import fails if the username column values are already in the CRM
Issue 3315485 - Varnish cache is not invalidated when overwriting files with %20 in the path
Issue 3315372 - When adding a new item in the admin the address fields is pre-populated
Known issues and limitations
Product list layout outputs the products using an unordered list, requiring CSS for better formatting
Favorites module does not support multiple templates (layouts)
Module detail views do not support multiple templates (layouts)
Recursive modules are not supported in email campaign preview
Dreamweaver design view, ignores the custom template and always renders the tags from the default template (layout)
For more information about this, follow the release announcement on the Business Catalyst blog: Introducing our feature packed September release!

Thanks Mario, what is missing from the post and this notification is a fundamental pieces of information "TIMES". This is not just your info but also the release by Jackson Palmer on the blog - totally missed there also
We need to be notified of the sceduled timing of this release not just a vague date which is not specific globally
25th but we are global - what time specifically 0100am PST is very different to 1030pm PST , the latter being 26th in AU
Why - because campaigns scheduled for around this time can be impacted, and also if the sites go offile during the maintenance window campaigns can be a wasted exercise.
Previously mid week schedules have been a matter of heated discussion, yet the support guys say that schedule ahas not been decided upon
Not planning is planning to fail, and we have witnessed that all to ofetn in the past. BC unfortunately has a history of failing to plan and inform, and this does little to activate confidence in the community.
I have discussed with Dragos on numerous occassion how the missing ingridents at BC like communication, UX, planning and most importantly understanding from the customer perspective (rather than backroom coders).
eg at 645am 26th of Sept 2012 we have a email campaign scheduled ( and can be rescheduled ), the issue I see is without your maintenance window timings being published in a timely manner how can we tell if we move to a sooner or later timing. You have to agree it is disasterious marketing to blast out a campaign and find systems down when customers open newsletter offers and want to shop then.
If the time schedule is listed somewhere else even more shame that it is overlooked as an inclusion here plus that Chat team are not informed and kept up to date and the blog is just fluff sales and chest beating. That is not support of partners regargless of paid or free status.
To much time is wasted with this sort of unthinking about unpublished / incomplete notifications, Live chat guy wasted > 15 min of his and my time becuase they don't know either, how many others are being inconvenienced by fialing to plan and notify information to act upon, this communication in the blog is good info but by itself useless and creates more doubt and lack or faith. Just look at the "hope in the comments"

Temporary wim-files for multicast transmissions still needed for WDS installation in Server 2012 R2?

Acording to
https://technet.microsoft.com/en-us/library/dn281955.aspx one of the new features for WDS in Server 2012 R2 for multicast is:
Improved multicast deployment by eliminating the need for making a local copy of the install.wim file. You can apply the install.wim file while it is being downloaded without significant impact to the application process.
However, this doesn't seem to be activated by default and I still get the following error when installing one or more machines using multicast:
"Windows Setup cannot locate a valid hard drive to store temporary installation files." However, once I remove Multicast from this install image, it installs without any problems at all.
I have also noticed that while multicasting, the installation will use the "Copying Windows files" phase, while downloading and copying the install.wim (or whatever name it is) locally on the hard drive first, so this will require lots of space.
So the question is, how do you enable this new feature that should be a part of WDS in Server 2012 R2???

Full version:
Following steps could help enable the feature:
1. Mount the boot image using dism.
e.g.
>dism /mount-wim /wimfile:c:\remoteinstall\boot\x64\images\boot.wim /index:2 /mountdir:c:\mount
2. Create a metadata file if no existing one. The metadata file should be in mountdir from the first step under mountdir\sources. And the file name should be: WdsClientMetadata.txt
3. Add entry to the metadata file: WDS.Client.Multicast.WIM.Streaming.Enabled=true
4. Save changes and unmount the boot image
e.g.
>dism /unmounts-wim /mountdir:c:\mount /commit
Sorry for the late reply, but I had to test this thoroughly since I didn't get it working right away. I tried both the regedit you first mentioned, and later also creating a textfile in the "/index:2 boot.wim", both without any success. I noticed
that creating the sources\WdsClientMetadata.txt with the data "WDS.Client.Multicast.WIM.Streaming.Enabled=true" gives me an error upon booting into WDS as follows (EUFI/IPv6-boot):
Same happens if I boot using IPv4 (an non-UEFI boot), except that there would be a plain IPv4-address instead in the error msg. Just for troubleshooting I tried writing WDS.Client.Multicast.WIM.Streaming.Enabled=false in the file instead, and WDS would throw
me the exact same error message. Once I delete the file sources\WdsClientMetadata.txt from the WDS/Boot image, the client boots ok, both for IPv4/IPv6. Disabling the firewall on the WDS didn't help, so something in the configuration is still missing? I'm getting
to a dead end here, and I suppose you're all out of advice on this one?
Thank you Shaon Shan for your great effort so far.

Using a 3rd party router for Multicast

Hi all,
There’s a lot of feedback on this board about using third party routers with Multicast, so we’ve decided to put this information all in the one place for you.
NOTE: the workarounds below haven’t been tested by BT as we do not support 3rd party routers and we do not endorse any of them. Our recommended router remains the Home Hub.
With the above statement in mind, we know that a lot of you do choose to use other routers. The information contained here has come from fellow customers who have given their time to share this information in good faith. Thanks to all of the forum members who have helped make this information available to our community it is a great example of the wealth of information that a community can provide and we hope this encourages users to come back and visit us in the future.
A special mention goes to walkerx who has posted and prompted a lot of the provided information.
Hub configurations in alphabetical order:
Apple Airport Extreme
Put your Airport Extreme into Bridge Mode and turn the Home Hub's wireless off.
[From MartinH's post]
ASUS RT-N66U
You must configure 'Enable VPN + DHCP Connection' to 'No' under the WAN option.
Settings used were:
- Have router on the latest firmware: 3.0.0.4.374.130
- Use the following settings in LAN > IPTV:
- 'Select ISP Profile' = None
- 'Choose IPTV STB Port' = None
- 'Use DHCP routes' = Microsoft
- 'Enable multicast routing (IGMP Proxy) = Enable
- 'Enable efficient multicast forwarding (IGMP Snooping) = Enable
- 'UDB Proxy (Udpxy) = 0
[From sepph's post]
Billion 7800DXL
Router has been reported to work.
[From walkerx's post]
Billion 7800N
Requires you to add another profile (Pure Bridge) to the EWAN port along with the PPPoE profile. Save settings & restart. Also enable IGMP proxy & snooping.
[TimCurtis' post]
DLink Dir 825
If enable multicast you can see the on-demand players but get an IPC6023 error when viewing the test channel (this means poor internet channel quality). This error message comes up even though it works if use the Home Hub 4
[walkerx's post]
Netgear R6300
Netgear R6300, but with the Home Hub 3.0 and 500Mbit Powerline adapters in the picture.
Modem -> HH3 -> R6300 -> Powerline -> 2 x Youview Boxes on other Powerlines.
To do this, configure the Home Hub 3.0 as 192.168.1.1, then disable its wireless and DHCP. Make sure that NAT and UPNP were enabled, and then set it to use the address 192.168.1.254 as a DMZ server.
Then configure the R6300 as the address 192.168.0.1, using the WAN IP address of 192.168.1.254, with 192.168.1.1 as the gateway and DNS server. The R6300 is then connected via WAN port to the HH3 Gigabit port.
In the R6300 settings switch on IGMP.
The above settings allow both YouView boxes to use on demand content and different streaming channels simultaneously, as well as giving the full features of the R6300 such as AC1750 wireless, network printing, and DLNA
[wigglr's post]
TP-Link AC1750
Router has been reported to work.
[zarf2007's post]
TP-Link Archer C7
Router has been reported to work.
[HappySlayerUK's post]
TP-Link TL-WR1043ND
No configuration needed, plug and play.
[walkerx's post]
TP-Link WDR4300 N750
Router has been reported to work.
[aseymour's post]
TP-Link TL-WDR4900 N900
Router has been reported to work, plug and play.
[cactusbob's post]
TP-Link routers in general
How to configure Multicast on TP-Link routers (from the TP-Link website).
One of our posters also found the following:
He found that your router must be able to do the following for Multicast:
For an end user connected via Openreach GEA (FTTC and FTTH)
• The Residential Gateway will support:
– IPoE for multicast traffic and PPPoE for BB traffic;
– VLAN tag ID of 0 or no VLAN tag ID for multicast and BB traffic;
– Fork IGMP requests up multicast and BB paths.
For an end user connected to an MSAN (WBC copper)
• The Residential Gateway will support:
– A dual VC architecture;
– Accept TV Connect multicast traffic on ATM VP/VC 0/35 with IPoE and broadband traffic on ATM VP/VC 0/38 with PPPoE;
– Fork IGMP requests up multicast and broadband paths.
IGMP should v3 and will be in range from 225.0.0.0 to 239.255.255.255
[walkerx's post]
List of routers that do not appear to work:
Draytek 2750n
Linksys EA4500
linksys EA6300
Netgear AC6300
[From Red_Snow's post]
If you use a router that’s not listed here, do a search on the YouView from BT board to see if advice has been posted elsewhere. If it hasn’t, do post your question.
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Thanks for confirming that quails.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

What happened to STARBUY for Zen Vision M 60 GB scheduled for today Dec 2 @10

Hey everyone,
I participated in Nov's starbuy, didnt manage to get anything and after it, I checked back a couple of days later and saw that Dec starbuy was scheduled for today 2 Dec at 0pm for Zen Vision M (Black) 60GB. But just logged onto Creative Online Store and didnt see the link for Starbuy. Anyone know what happened to it's? Does this mean no more starbuy from now on?

I also was eagerly watching for the starbuy that you have referred to on Dec 2 at 0pm. I must say I'm disappointed with what Creative has done. Sure, they have every "right" to withdraw their offers but they did not bother to inform the public about it. I personally checked the website patiently from 9pm to 030pm thinking that maybe they were getting ready to upload the website with the starbuy. But NO the stupid link kept going back to the creative homepage. And they sneakily removed all the advertisements to the starbuy.
What p**ses me off even more is that if you check today, they have sneakily changed it to some "SoundWorks 500DAB" which is a new item but nobody's ever heard of before or is probably interested, compared to the ZVM 60GB. It's quite big (it's not a mobile player, .92kg, looks more like a mini-compo) and only plays "Digital Audio Broadcast" (what's that?) and FM Stereo. Hello Creative? What era is this? Who wants to buy this only to leave it at home to listen to the radio or DAB? It's not mobile, it can't play MP3s or video or photo. Or even CDs.
Check it out at sg.store.creative.com/starbuy
Why they decided to pull the ZVM beats me. I have no idea. And why Creative has started selling what looks like basically an expensi've radio (ie, they are going back in time) beats me even more. As echoed by many Internet reviewers, compared to Apple Ipod, Creative's MP3 players are pretty good and they should focus their attention on that, try to make them even smaller and longer battery life, more functions, more codecs, better screens, BUT what we see is Creative di'versifying and designing/manufacturing so much new products that they may not have a market for.
EDIT: Ok I just checked, about DAB: from Wikipedia
Digital Audio Broadcasting or DAB is a technology for broadcasting audio programming in digital form that was designed in the late 980s but which is now being introduced in many countries. The original objecti'ves of converting to digital systems were to enable higher fidelity, more stations, less inteference, mobile services and additional information such as text, although in practice the vast majority of radio stations on DAB sound worse than on FM.
In Singapore, MediaCorp's SmartRadio was launched on 9 November 999. Using the Eureka 47 DAB system, SmartRadio provides six digital-only stations and eight simulcast FM services, along with images and text to supplement the audio. Singapore was the first country to reach full DAB coverage.
My response: I still think that Creative should work on their mp3 players. They could try introducing this DAB technology into their MP3 players, maybe be the first in the world to do it. Sooner or later another company's gonna do it.Message Edited by fourseven on 2-04-200602:30 AM

KM Scheduler Task vs SAP Netweaver Scheduler for java

Hi Experts,
I need to know the key differences between KM Scheduler task implementation and SAP Netweaver Scheduler for java task implementation. Which one is better and why?
Thanks for looking into this and for you patience in answering the question.
Regards,
Kiran K Grandhi.

Hi,
Please look at this help
[SAP NetWeaver Scheduler for Java|http://help.sap.com/saphelp_nwce10/helpdata/en/44/03d66015ee10b3e10000000a11466f/content.htm] and [KM Scheduler task|http://help.sap.com/saphelp_nw04s/helpdata/en/3a/bc37b5789dee4eaa8005bff84f14cf/content.htm]
Best Regards
Vijay K

SRM 3.0 integration with XI 3.0 for Supplier enablement scenario

Hi,
Iam trying to integrate SRM 3.0 with XI 3.0 for Supplier Enablement Scenario. Can anyone please help me with the documentation for the same? I have downloaded documentation for SRM from service.sap.com/ibc but it contains steps only for XI 2.0.
Does anyone have the steps for XI 3.0?
Thanks and Regards,
Manish

Vadim
We are looking to integrate SRM 4.0 with R/3 ( ECC 5.0 ) using XI 3.0. I went to service marketplace to look for XI process content for SRM 4.0 - I could find XI content for SRM 2.0 only.
1) Do you know where SAP pre-delivered XI 3.0 process content can be downloaded from ?
2) Would you be having the cookbooks- possibly for all scenarios for SRM 4.0
If you could forward /give pointers to the above , I would appreciate your help. My yahoo id is [email protected]
Thanks for your help in advance.

How to set up set which NIC card to use for multicast?..

 I just downloaded Rolling Patch 1 for WLS6.0SP2.
 While reading the README file it says
 " ISSUE 42518: Provided a way to set which NIC card to use for multicast traffic
 Can anyone tell me how to set this?. on my WebApplication server it has two NIC
 cards and I want to use the NICcard which is being used to talk to internal network
 for multicast messages.
 One more thing,
 Can anyone one tell how to search for bugs (ISSUES) in weblogic. I am looking
 place where I enter ISSUE number and should get the detailed description of bug/issue
 etc..
 Thanks for helping,
 Nilesh


 Thanks Kumar, I'll try this.
 Does this -Dweblogic.interfaceAddress used only for multicast. Or this is also
 used to talk to AdminServer?.
 The other problem I am facing is when I restart the AdminServer in recovery mode
 it's not finding my WebApp servers, because my webapp servers are on public network
 and my admin (management) server is on private network.
 please look at http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.management&item=1217&utag=
 , for more details about my problem.
 Thanks,
 Nilesh
 Kumar Allamraju <[email protected]> wrote:
 ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
 ><html>
 >You should be able to do it via console in 6.1
 > Not sure if it was added in 6.0
 >For 6.0 you can set this via command line
 > java -Dweblogic.interfaceAddress=<addr>
 >You need 6.0 SP2 RP1
 >--
 > Kumar
 >Nilesh Shah wrote:
 ><blockquote TYPE=CITE>I just downloaded Rolling Patch 1 for WLS6.0SP2.
 > While reading the README file it says
 > " ISSUE 42518: Provided a way to set which NIC card to use for multicast
 >traffic
 > "..
 >Can anyone tell me how to set this?. on my WebApplication server it
 >has two NIC
 > cards and I want to use the NICcard which is being used to talk to
 >internal network
 > for multicast messages.
 >One more thing,
 >Can anyone one tell how to search for bugs (ISSUES) in weblogic. I
 >am
 >looking
 > place where I enter ISSUE number and should get the detailed description
 >of bug/issue
 > etc..
 >Thanks for helping,
 >Nilesh</blockquote>
 ></html>
 >

Open Order scheduled for delivery

Hi there ,
Please suggest me the report to spool the Open Order scheduled for delivery for a material ....
Regards
Kaushik

Hi
Check the delivery due list, its shows open orders due for delivery for a particular date
and the list can be printed or sent to spool
Anurag

Delivery Schedule for Service Item

Hi folks!
Can anyone guide me, how to create delivery schedule for Service item in Purchase Order.
Regards.

If it is an external service (Item category D), you cannot enter delivery schedule for individual services.
Lakshman

Delivery Schedule for Samples

Hi All,,
Samples are sold over a delivery schedule.
i.e Can we have delivery schedules for Samples.
with regards

First of all, I am not sure how you do you differentiate normal sales from sample sales. In normal circumstances, either we differentiate by document type or item category.
Moreover, I am not clear on your comments
Samples are sold over a delivery schedule
What do you mean by delivery schedule ?? Do you mean scehdule line date in sale order ??
thanks
G. Lakshmipathi

Automatic delivery schedule for Scheduling Agreement

Hi all...........
I like to create automatic delivery schedule both JIT & FRC schedules for Schedule agreement, means system has to suggest the schedule lines.
I created SA and creation profile, when Im trying to generate JIT schedule system showing "Error generating release against scheduling agreement (cause 2)".
Pls let me know wht configuration I hve to do and pls let me know all the steps.
I like to know output determination setting for SA releases also.
regards
Durga Ram

Hi
'Propose all Items" is ticked so that MIGO proposes all the items irrespective of the delivery date and quantity. This means that even if the delivery date has not yet been reached or the complete qty has been received, the system will still allow you to do the GR.
Hope this clarifies.
Thanks

MRP-Delivery Schedule for Sales order is not updating in Production order

Dear Experts,
I have created Sales order and maintained delivery scheduling, Then Run MRP through MD50,
We received Planned order then through this we have converted to Prodcution order.
When we observe the delivery schedule for sales order under assignment Tab in Produciton order which is showing zero instead showing line item of Delivery schedule.
I am able to see Sales order and Line item but i am not abel to get any delivery schedule line item.
Please suggest where settings are missing.
Thanks in advance
Regards
Don

Dear Experts,
Please provide me solution.
after Running MD50 transaction against Sales order.
If I maintained different Scheduling Line Item for First Line item of Sales order.
The Respective Scheduling Lines should update against Each Production order which has converted from Planned order.
Thanks in advance.
Regards
DON

Schedule for del stock display even after delivery and goods receipt

Hi, Please suggest me for below scenario...
I have a scenario where we does STO and then delivery against outbound and performs goods receipt. in MMBE the stock is still displaying under schedule for delivery and also in MD04 even the stock is deducted from supplying plant and performed goods receipt at receiving plant..also stock is displaying at receiving plant..why the stock is still displaying in stock for del at sending plant..in general what happens when we does goods receipt against outbound delivery or when we does against STO?

ok sir ;
No i don't talke abouat STP i don't have any transit stock it's a simpl sales based on global purchas
-first with me21n i created global purchas order
-the sales will be picked from this purchas .
-delivery is assigned automatically to this purchas order with user exit.
-with vl02n in goods issue steps there is tow operations ( stock mvt 101 in purchas assignement and a normal 601 for delivery )

Schedule for Multicast enabling

Similar Messages

Maybe you are looking for