Schedule for next AsyncOS release

All,
I have read in one reply that some "issues" are fixed now with AsyncOS 5.5. Any information as to when this version will be released?
Thank you!

Ezekiel,
The short explanation is that the WSA executes a typical man in the middle SSL attack.
The WSA initiates SSL sessions with both the client and the server. After receiving the certificate from the server, the WSA generates it's own certificate and serves it to the client.
Since the certificate used to generate server certs is not trusted by the browsers, the browser will receive a trust warning. You can get around this by loading the CA cert into the clients on your network.

Similar Messages

Give reason - Scheduled for next payment run in APP

Dear All
In APP > Parameter Tab > there is a field Next p/date is it for next payment run schedule date or base line date or what for?
For example: I am running APP for the date 11.09.2008 my next p/date which i given is 12.09.2008. Suppose if i run the second time on the 11.09.2008 for the same vendor itself it is running. But it is not throwing error message : you need to run on 12.09.2008. Why?
Regards
Manikandan

Hi
The help for the field explains clearly why this field is given..
This date is needed in order to check the due date of payables. If an item is already overdue on the date of the next payment run, or would lose cash discount, the system pays the item in this payment run.
The general rule for receivables is that they cannot be paid until the baseline date for payment has been reached. Such items are paid on or after the baseline date for payment, regardless of when the next payment run is scheduled for.
Hope it was helpful
Karthik C P

Any truth to the rumored update scheduled for next week?

Saw that P3Droid tweeted there is an update coming for the X next week - any VZ comments to confirm?
Crossing my fingers but not holding my breath...

Wildman wrote:
And this update is suppose to due what? Not being funny, I would like to know..
P3Droid P3Droid
On a happier note..I hear the X is slated for an update next week. If you are rooted and want the new radio you will have to monster to 340
~~~~~~~~~~~~~~~~~~~~~~~~~
That's all I've heard - I do have a DX, and although have not experienced all the bugs with Gingerbread, I do have the restart issue and lose 3G connectivity pretty consistently. It's a stock DX, with only very few apps - bought it in February.

Anyone get their Pre-Order that was scheduled for Next Day Delivery?

I'm just curious since a good amount shipped out yesterday and then they had the typhoon in Shanghi where the Fed Ex Depot is at.

For all waiting on your preorders- I preordered mine Sept. 5th about 5 hours after the announcement (engraved, standard shipping). It was shipped Sept. 19th and was delivered to my house at 10am today (Sept. 20th), despite having an estimated delivery date of Sept. 21st. As noted in another post, they seem to be coming out of Kunshan, China and then Shanghai and Anchorage, Alaska. Mine might have arrived a day early because Indianapolis is a major FedEx hub and there is a direct flight from Anchorage to Indy. Suspect many will get their Touch models today and tomorrow.

When Flash Builder 4.6 for PHP is released will it support AIR 3.2 ???

We've all been waiting a long time since last November's Private Beta of Flash Builder 4.6 which was released shortly thereafter, for the Flash Builder 4.6 for PHP version.
However, Flash Builder 4.6 for PHP (The one with Zend Studio included in it) is scheduled for 2012 - Q1 release, meaning?
I guess, at the latest March 31st.
This is significant, because AIR 3.2 is Great, but it will Live or Die based on what happens, I believe, in the next year, the new demo with the 2 geniuses at Adobe, Lee Brimelow and Thibault Imbert, which essentially ARE the driving intellectual force behind AIR, make me feel more comfortable than the management at Adobe,
http://tv.adobe.com/watch/adc-presents/hardware-accelerated-graphics-for-mobile-games-with -adobe-air-32/
So, when FB 4.6 for PHP is released, will it support AIR 3.2?
There's another thing, there are a ton of job offerings for iOS 5 or Android Java, but no AIR (very few and the damage control fromthe eff'ed up press release is still meandering).
Adobe needs to compliment its consumer base and developer base, with a Developer Network for Corporate integration so there are contracts out there for us who live between our dream ideas and meals, by doing contracting work, and it'd be nice to do it in Flash Builder 4.6 instead of taking on an iOS 5 or Android Java or PhoneGap project. At least for Gamers.
REPORTS: Social Gaming will be a $5B industry by 2015. The total mobile market will be a $15B industry by 2015.
I'm shooting for the Social Gaming, and I like what I see in the above video.
But again, people have to pay bills, why doesn't Adobe reach our to Corporations for certified developers like Mickysoft and Apple?

I worked it out in the end - I had to uninstall FB4.5 and reboot. Why couldn't the installation say so instead of just crashing? I found this out, by the way, by trying to run the installer created under c:\program files(x86)\adobe\adobe flash builder 4.6. That one told me at least that I had to uninstall a previous version, though even then it was coy about which one

Can't we use function to derive value for NEXT clause in MV ?

Hi Friends,
I have a requirement like below
I need to derive the schedule (Value for NEXT clause in the create MV command) for a MV to run it
e.g., Value from a date column : 03-JUL-2012 10:00 AM, VALUE for NEXT clause in CREATE MV statement should be 03-JUL-2012 04:45 AM (It is -5.45 hrs from the above date column value )
So I wrote a function (GET_DATE) to derive schedule for NEXT clause and tried to call it from NEXT caluse, but it is giving error message as mentioned below
ORA-04044: procedure, function, package, or type is not allowed here
CREATE MATERIALIZED VIEW child_mv
PARALLEL 16
INITRANS 16
STORAGE (
FREELISTS 16
FREELIST GROUPS 4
BUILD IMMEDIATE
REFRESH COMPLETE
NEXT GET_DATE('PARENT_MV')
AS
SELECT * from xxmdme_party_stage where rownum<101;
Could you please help to give some light on how this can be done ?

942661 wrote:
Hi Friends,
I have a requirement like below
I need to derive the schedule (Value for NEXT clause in the create MV command) for a MV to run it
e.g., Value from a date column : 03-JUL-2012 10:00 AM, VALUE for NEXT clause in CREATE MV statement should be 03-JUL-2012 04:45 AM (It is -5.45 hrs from the above date column value )
So I wrote a function (GET_DATE) to derive schedule for NEXT clause and tried to call it from NEXT caluse, but it is giving error message as mentioned below
ORA-04044: procedure, function, package, or type is not allowed here
CREATE MATERIALIZED VIEW child_mv
PARALLEL 16
INITRANS 16
STORAGE (
FREELISTS 16
FREELIST GROUPS 4
BUILD IMMEDIATE
REFRESH COMPLETE
NEXT GET_DATE('PARENT_MV')
AS
SELECT * from xxmdme_party_stage where rownum<101;
Could you please help to give some light on how this can be done ?you must (ab)use EXECUTE IMMEDIATE

Cisco AsyncOS 7.5.1-074 for Web FCS Release Notification

Dear Cisco Web Security Customer,
Cisco is pleased to announce a new maintenance release of AsyncOS 7.5.1-074 for Web to select customers (FCS). This release applies to all our Web Security Appliances (S-Series).
Note: If you manage multiple Web Security Appliances using our Security Management Appliance (SMA) you need to upgrade the SMAs to AsyncOS 7.9.1-030 for Security Management (or higher).
Partial list of defects fixed in AsyncOS 7.5.1-074 for Web
Fixed: Rebooting an appliance without a proper shutdown sometimes caused irreparable damage to the appliance. This is fixed. [Defect ID: 73467]
Fixed: Processing client requests sometimes took too long after updating new anti-malware rules. This is fixed. [Defect ID: 81055]
Fixed: Overloading webroot made the WSA unusably slow. This is fixed. [Defect ID: 81661]
Fixed: With Safe Search enabled, for URLs that included a question mark (?) in the first position after the domain name, for example, "example.com/?abc", transaction requests were resulting in an HTTP 404 error message. This is fixed. [Defect ID: 83666]
Fixed: Download time for Web Tracking data in CSV format was excessive when specifying a custom time range for the report. This is fixed. [Defect ID: 85964]
Fixed: After upgrading to 7.5, attempts to bring additional Web Security Appliances online were unsuccessful due to port-number mismatches between the Appliance and the WCCP router. AsyncOS now sorts port numbers from smallest to largest to prevent mismatches. This is fixed. [Defect ID: 86704]
For further information about this release, please refer to the AsyncOS Release Notes attached to this annoucement.
If you are concerned about an issue not listed there, please contact your authorized support provider to make an inquiry.
How to Upgrade
Prior to upgrading to this release, please read the Release Notes referenced above and save a copy of the configuration file somewhere other than on your appliance.
Once you have read the Release Notes you may log into the command line of your IronPort Appliance as the 'admin' user, and type 'upgrade', or use the WebUI upgrade functionality in the 'System Administration' tab.
You may upgrade directly to the highest version available in the displayed list.
**NOTE** It is important that you follow the upgrade instructions available in the Release Notes. If you do attempt to upgrade and do not see the desired release version available, your appliance is likely not on a version allowed to upgrade directly. See 'Upgrade Paths' below.
Upgrade Paths
Please refer to the Release Notes for qualified upgrade paths.
If your systems are on any other AsyncOS release, you will need to perform multiple upgrades as specified in the release notes. Only the immediate next step in the upgrade path will be shown to you, with the next revision being shown once you are at the approved level.
Release Stage
First Customer Ship (FCS): This release has been fully qualified for production usage by Cisco IronPort. It has been extensively tested for functionality and stability. Following a staged release process, we offer select customers the chance to benefit from new features and enhancements as early adopters.
Thank you for choosing Cisco Security Products.
Best Regards,
Cisco Content Security Customer Support
Support Portal: http://cisco.com/web/ironport
Toll-Free Customer Support
United States: 1-877-641-IRON (4766)
International: http://www.cisco.com/web/ironport/contacts.html#~tab-3
NOTICE: CISCO SYSTEMS CONFIDENTIAL AND PROPRIETARY This document contains information which is both confidential and proprietary to IronPort. Neither this document nor the information contained herein shall be copied, disclosed to others or used for any purposes beyond the specific purpose for which this document was delivered without the express written permission of IronPort. If you receive this message in error, please notify the sender and destroy the attached message (and all attached documents) immediately.
© 2012 Cisco Systems, Inc. All rights reserved.

Hello Sergio,
To get to Ironport Dcoumentation, please do the following:
1) go to www.cisco.com
2) Login with CCO id and password
3) Select support
4) On resulting page, under Prduct Name, select Security
5) You should see "Email Security" and "Web Security" option there, which will bring you to the Documents.
For WSA the doc guides are here http://www.cisco.com/en/US/customer/products/ps10164/products_user_guide_list.html
For The ESA the doc guides are here http://www.cisco.com/en/US/customer/products/ps10154/products_user_guide_list.html
Regards,
Eric

RELEASE NOTES R180 - scheduled for September 25th 2012

We are announcing a new Business Catalyst release, scheduled to go live on Tuesday, September 25th.
This release includes some great improvements to our module templates, new features for our email marketing system, admin interface improvements, a few infrastructure updates and lots of bug corrections.
Read through the following sections to get detailed information about this release:
Features and enhancements
Issues fixed by this release
You can jump to the corresponding section by clicking the above links.
Features and enhancements
Modules improvement
Starting with our September release, we have enabled users to use a html page or a static template as a module list template (layout) for all modules that are using templates today. The new addition allows partners to create different views for the same data for a personalize experience. To use this new functionality, just create a new module template and update your module properties by specifying the template to use.
Ex: {module_blogsitepost,2 template="/ModuleTemplates/Custom/MyTemplate.tpl"}
Note: although you can use any extension you feel comfortable with, we recommend using a .tpl extension for two reasons: help locate the template better and avoid having these templates being displayed in Page list.
Email marketing application improvements
This is release is packed with new features and enhancements to our email marketing system.
Dynamic modules in email campaign - you can include modules (a subset of 19 modules) in the Email Campaigns content; the system will render these modules right before the campaign is sent, making sure your customers always receive the latest content;
Fresh, new email templates - the release includes a set of new of new email templates that look much better; along with these new templates, the template selection page was re-done to show better thumbnails;
Improved recipients selection - we have improved the recipients wizard step, replacing the checkbox list with a smart search and select control; additionally, with this release you will be able to select multiple lists (including Customer Reports) to exclude from your campaign.
Improved campaign status screen - before sending the campaign, you will now be able to view the exact number of recipients before sending the campaign (Note: reports and list requiring a long time to compute will be approximated); additionally, while the campaign is sending, we are displaying a meaningful status, that indicates that the campaign is being sent.
Email clients reporting - the campaign report screen has also been improved to include a report showing you the email clients used to read your campaigns.
Admin console improvements
We have updated our new admin user interface and replaced the insert module and insert tag panels with the new Business Catalyst toolbox almost everywhere. With the new toolbox we'll make it easier for partners and business owners to insert and customize module or tags into pages, templates or system emails. The toolbox user interface will opened by default for partners for faster access to tags and modules.
Other changes
Some FTP improvements (better error codes, performance, etc) and SFTP support
DNS improvements (support for setting up Google Apps email out of the box, several bug fixes)
When you change your email address on adobe.com, it syncs automatically with BC
Various improvements of the caching engine for static assets
Issues fixed by May release
Issue 2869695 - Fixed an issue that broke the comments submitted by visitors by placing <br> tags after a random number of characters;
Issue 3317538 -     Fixed an issue preventing the social media modules from being reinitialized after pressing "Add to cart"
Issue 3317105 -     Files with spaces in the name do not get invalidated properly on FTP/API delete
Issue 3317478 -     Fixed an issue causing hardcoded http paths to generate security alerts when on https
Issue 2567045 -     Fixed an issue with Product Purchased with Details data field
Issue 2567131 -     Fixed an issue causing web app creation forms to generate [No Name] duplicates
Issue 3319245 -     Fixed the search function on Help & Support
Issue 3320623 -     Fixed an issue causing decimal prices to be incorrectly saved when editing/creating an order in admin and having the site admin language set to a country language that uses "," as decimal separator instead of "."
Issue 3325526 -     Fixed an issue causing the CRM Session verification to fail for session IDs that contain +
Issue 3162093 - Fixed a problem [AdminV4] HTML files for campaigns can't be edited
Issue 3009528 -     Updated multiline fields to allow line breaks
Issue 3010606 -     Changed FTP blog layouts listing to properly handle cases of invalid layout group names
Issue 3315646 -     Fixed an issue causing {tag_blogcategorylist}to not limit the number of results as set
Issue 3316323 -     Small bug/improvement at offline payments on copy/pasting the PDF password
Issue 2900590 -     Fixed an issue causing a correct web app item address to change to another one on some sites
Issue 3319299 -     Fixed some performance problems causing Edit Web Apps Settings -> Autoresponder interface to freeze
Issue 3320422 -     "Free shipping" not validated when enforcing shipping validation
Issue 2918069 -     Cannot save values properly for webapp items when the custom field uses comma separated checkbox list, and it has more then 265 characters for the list of values
Issue 2925458 -     Web App edit form is adding "X_" to the existing classes inside the description field. Every edit will add another x_ ending up in something like class="x_x_x_classname"
Issue 2567035 -     Can not list files in FTP when there are invalid characters or similar in the directory
Issue 3313655 -     Import fails if the username column values are already in the CRM
Issue 3315485 -     Varnish cache is not invalidated when overwriting files with %20 in the path
Issue 3315372 -     When adding a new item in the admin the address fields is pre-populated
Known issues and limitations
Product list layout outputs the products using an unordered list, requiring CSS for better formatting
Favorites module does not support multiple templates (layouts)
Module detail views do not support multiple templates (layouts)
Recursive modules are not supported in email campaign preview
Dreamweaver design view, ignores the custom template and always renders the tags from the default template (layout)
For more information about this, follow the release announcement on the Business Catalyst blog: Introducing our feature packed September release!

Thanks Mario, what is missing from the post and this notification is a fundamental pieces of information "TIMES". This is not just your info but also the release by Jackson Palmer on the blog - totally missed there also
We need to be notified of the sceduled timing of this release not just a vague date which is not specific globally
25th but we are global - what time specifically 0100am PST is very different to 1030pm PST , the latter being 26th in AU
Why - because campaigns scheduled for around this time can be impacted, and also if the sites go offile during the maintenance window campaigns can be a wasted exercise.
Previously mid week schedules have been a matter of heated discussion, yet the support guys say that schedule ahas not been decided upon
Not planning is planning to fail, and we have witnessed that all to ofetn in the past. BC unfortunately has a history of failing to plan and inform, and this does little to activate confidence in the community.
I have discussed with Dragos on numerous occassion how the missing ingridents at BC like communication, UX, planning and most importantly understanding from the customer perspective (rather than backroom coders).
eg at 645am 26th of Sept 2012 we have a email campaign scheduled ( and can be rescheduled ), the issue I see is without your maintenance window timings being published in a timely manner how can we tell if we move to a sooner or later timing. You have to agree it is disasterious marketing to blast out a campaign and find systems down when customers open newsletter offers and want to shop then.
If the time schedule is listed somewhere else even more shame that it is overlooked as an inclusion here plus that Chat team are not informed and kept up to date and the blog is just fluff sales and chest beating. That is not support of partners regargless of paid or free status.
To much time is wasted with this sort of unthinking about unpublished / incomplete notifications, Live chat guy wasted > 15 min of his and my time becuase they don't know either, how many others are being inconvenienced by fialing to plan and notify information to act upon, this communication in the blog is good info but by itself useless and creates more doubt and lack or faith. Just look at the "hope in the comments"

Automatically upgrade any superseded versions of this application not auto installing - Status always waiting for next maintenance schedule

Hello,
I'm trying to deploy an application to a user group with the option checked for "Automatically upgrade any superseded versions of this application" but it never auto installs.
- The application is set to install to system whether the user is logged on or off.
- We do have user affinity, therefore the user does have a one or more primary devices setup.
- If I run the install manually, it will superseded and install the new application and uninstall the old applications.
- The estimated installtion time minutes is set to 0
- The maxmimum allowed run time is set to 120 minutes.
We're on version SCCM 2012 SP1.
My assumption of how it should work
If the user is logged in or NOT and it's during the maintenance window, it should auto install the application. Maybe I'm wrong.
Here's the scenario.
User JohnDoe has application Viewer 1.0 installed on his machine. He installed this app via the SCCM application catalog. We now need to deploy Viewer 2.0 of this application. I want to ensure when it's deployed it replaces Viewer 1.0 hence
the reason to check the "auto upgrade.."check box.
Here's what happens. In software center, it will pre-downlaod the software and then set the status to "Waiting for next maintenance schedule". The problem is that the status stays like this forever. We do have maintenance windows set
on the device collection that JohnDoe's primary device is part of. Here are our maintenance windows.
- Daily - 9PM to 5AM = 8 hours
- Weekly - Saturday - 12:00AM to 12:00 = 24 hours
- Weekly - Sunday - 12:00AM to 12:00 = 24 hours
Coordinated UTC is not checked.
The business hours in software center are set to 5am to 10pm.
One would assume that it would auto install during the night since we have a big maintenance windows. I checked the ServiceWindowmanager.log and it does seem to show the various maitnenance windows.
Here's what I've tried
- If I make the deployment required, it will install right away regarless of maintenance windows. However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software.
- If JohnDoe clicks install in Software center or application catalog, it works. There's nothing wrong with the packages. The issue seems to be related with the maintenance windows.
- If I disable the maintenance windows, then it seems to work but only when I'm logged in. It still does not work if I'm logged out. It only kicks off the installation when I login if it's not during the business hour set in software center.
We need the maintenance windows since we don't want windows patching to occur during the day.
- I searched and ran the report to ensure there's not another maintenance windows setup that would prevent this from installing.
Our current workaround
To ensure users are using the latest version, we deploy the application required for a couple of days, then delete that deployment once we reach a high 90%. The problem with that is if some computers are turned off, they would be using the older version
and it will never get upgraded unless the user installs it manually.
Has anyone encountered this? Any other log files I should look at? Anything else I should verify ? I know in SCCM 2012 R2, you can set the maintenance window to only apply this schedule to software update (patching) but that option doesn't seem
to be available in SCCM 2012 SP1.
Any help, suggestiong, I will take. Thanks.

- If I make the deployment required, it will install right away regarless of maintenance windows. However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software.
Re-check your deployment, specially the user experience:
If you've checked the box next to "Software installation", it will install after the deadline has passed and ignores maintenance windows. Change the deployment to required and uncheck that box and the software should be installed according to your
maintenance windows.

Is their roadmap for the next major release of Netweaver stack?

In the ERP area, I found this link that mentions a roadmap for mySAP ERP2005 and beyond.
Is there a corresponding "beyond NW04s" roadmap? Or is the next major release of Netweaver targeted for 2010 as is the next major mySAP ERP release mentioned in the above mentioned roadmap?
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5bd723c2-0d01-0010-97a5-cb14fe7f2810">mySAP ERP2005 roadmap and beyond</a>

Tobi, I can't go too far into it, but I can assure you that the next major release of Netweaver will not be in 2010. The idea is that you will be able to upgrade your Netweaver layer without upgrading the core(ECC). That means that you can stay current with technology while your business stays the same. So there will be Netweaver releases every so often before 2010.
Regards,
Rich Heilman

Apple pls look here: Some "quick wins" for the next firmware release

Hi!
First of all: Thank you, Apple, for Update 1.0.3! The most annoying bugs are fixed and the click wheel works better (but in my opinion the quick wheel of the iPod nano works still even better).
Please allow me to suggest a few "quick wins" you could easily (in my opinion) include in the next firmware release:
+ Please add an option to turn off that "screensaver" or to change the time until it turns on
The "screensaver" wouldn't be that bad when:
+ It would display "now playing" information in a large font (better readable than the normal "now playing" when the background light is off
+ The screensaver clock would display 24h format, when configured
Best regards, Jens

It's a waste of time posting this here because it's a user to user forum and no-one from Apple (except maybe the forum moderators) will see it.
Please use this link.
iPod Feedback.

Help schedule the next Micro firmware

Hi folks, recently there was a petition for firmware release email notification...
I would re-phrase that need. ;-)
What we really need (listen up Creative ), is for us to be able to schedule the release of the next firmware...
E.g., I'll be on summer holidays starting July 7, so as a first guideline for Creative, please release the next v Micro firmware before July 7. It would be great to leave on holiday with some new features on my Micro. Oh, and as a corollary, please make it a bug-free version, because I will be unable to downgrade until 3 weeks later.
Now, I don't have any special requests regarding the v2 release dates, but maybe other folks have.
SSR, please don't tell me to read the FAQ re: firmware release schedules

Riiight. Closing this as it's obviously a joke petition.
Cat

Automatic delivery schedule for Scheduling Agreement

Hi all...........
I like to create automatic delivery schedule both JIT & FRC schedules for Schedule agreement, means system has to suggest the schedule lines.
I created SA and creation profile, when Im trying to generate JIT schedule system showing "Error generating release against scheduling agreement (cause 2)".
Pls let me know wht configuration I hve to do and pls let me know all the steps.
I like to know output determination setting for SA releases also.
regards
Durga Ram

Hi
'Propose all Items" is ticked so that MIGO proposes all the items irrespective of the delivery date and quantity. This means that even if the delivery date has not yet been reached or the complete qty has been received, the system will still allow you to do the GR.
Hope this clarifies.
Thanks

Scheduling agreement in SD, release number

Dear All,
I trying to implement an automatic process for one customer, getting in an EDI 862; transferring this in an IDOC message type DELINS of Basictype DELFOR02 and updating the scheduling agreement accordingly.
This is working fine, for simple cases, but this customer is sending different release numbers for the same product at one time, and also sending the release numbers multiple times.
e.g. today I am getting for product A a release number 111 with multiple schedule lines, and also a release numberr 112 for the same product with multiple schedule lines.
tomorrow I might get again an EDI 862 for this same product, containing revised information for release number 111 and 112.
This is in my understanding not matching the SAP logic, where it's clearly stated, that a new release number is replacing completely the old release number.
Does anybody has any idea how to implement such a process?
I already have studied all documentation, tried to implement it in different ways, but I am reaching every time only a 80 % solution.
Do we have in this community any experts on scheduling agreements on the SD side, which might be able to help me?
Thanks for any possible help.

check these
BAPI_CUSTSCHEDULAGREE_CONFDELV Customer Sched. Agreement: Confirmation of Delivery; Document Flow Upd
BAPI_SALES_DEL_SCHEDULE_CREATE BAPI for creation of releases in scheduling agreements

How to configure release procedure for rate contracts release

Dear all,
How to configure release procedure for rate contract following are the requirements
they are two release codes c1 & c2 <=100000,>=100000
                if c1 is not there c2 has to be approved
     Change in the value of the rate contract contract
     Change in the validity of the rate contract
     Addition of deletion of line items
While using a non u2013 released rate contract in the PO an error message should shoot out.
Also the logic should be changed while using the rate contract in the PO.
The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
It should be possible to refer existing valid rate contracts in purchase orders.
Regards,
bhaskar

Hi,
In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
class in standard is the same FRG_EKKO, you can use the same for contract.
To distinguish if it's a contract or PO, EKKO-BSART can be used.
For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
You can restrict the document type to set up the release strategy for only contract.
Of cause, you can also create your own release class Z* for contract copying standard
one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
OLME:
-> contract
->Release Procedure for Contracts
->Define Release Procedure for Contracts
->Release Groups
If you have already created the PO release class.
Assign a new chracteristic of Document Category -BSTYP
Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

Schedule for next AsyncOS release

Similar Messages

Maybe you are looking for