Schedule line- Delivery Qty Field Name

Hi All,
I need to know the Delivery Qty Field Name in Schedule Line in Order .from the system I took rv45a stru name. But I want to know exact table name and Field Name .
If it is not stored Directly, then I need to Know how to calculate Delivery Qty.
With Regards,
Neptune.M

Hi,
LIPS-LFIMG - Actual quantity delivered (in sales units)
It is in LIPS table pass VBELN AND POSNN to obtain
SELECT SINGLE * FROM LIPS
                           WHERE VBELN = DTAB-VBELN
                                AND POSNR = DTAB-POSNN.
    IF SY-SUBRC EQ 0.
      MOVE : LIPS-LFIMG   TO    DTAB-LFIMG.
      MODIFY DTAB.
    ENDIF.
Reward points if useful
Lakshmiraj

Similar Messages

Schedule line delivery problem...

When you create outbound delivery with reference to a SO for first material, it is delivered...and when you create outbound delivery for second material, system generates a message...NO SCHEDULE LINE DELIVERY UP TO SELECTED DATE.....what should be done...please let me know

Dear Raghu,
Your issue accured Because of there is no conformed schedulelines for that date which you are trying to create delivery.
Go to VA02, then go to the scheduleline data of the second material there you find the scheduleline conformed date.
Now you go to VL01N enter the conformed date(Same date as scheduleline conformed date) in the selection date field then execute the transaction.
I hope it will help you
Regards,
Murali.
Edited by: Murali Mohan.T on Mar 21, 2008 12:19 PM

Update Schedule line Delivery date using Bapi_po_Change

Hi all,
I am using Bapi_po_change to Update the Schedule line Delivery date(EKET-EINDT) for the PO based on the Item and the Schedule line.
I am passing the PO number, Po header, Item structure, Schedule line Structure.
But the Date is not getting updated in the Eket table.
Please suggest.

Hi Sukriti,
Thanks for the Response, yes i have used the Bapi Transaction Commit Also .
The point is I am able to Update the Statistical Delivery Date in the Same EKET table using BAPI_PO_Change .I have Checked all the Ways to update the EKET-EINDT(Delivery Date)but no Unable to do it.

Calculate all days in month from schedule line delivery date for 12 mths

Hi experts,
I am trying to solve a problem and would appreciate any help! Im on BI7.
The user will input a date for the schedule line delivery date via a variable.
From this date I need to go forward 12 months exactly and display a key figure (outstanding value) by months but the first and last months must only use the days in that month i.e not the whole month if not selected by the user.
I.e if the user types in 13.05.2008
The display need to show (columns)
May 08 (13th to end of May 2008)
June 08   (All)
July 08    (All)
August 08    (All)
Sept 08    (All)
Oct 08     (All)
Nov 08     (All)
Dec 08    (All)
Jan 09     (All)
Feb 09    (All)
Mar 09    (All)
April 09   (All)
May 09 (1st to 12)
So I neen to restrict the key figure (Outstanding Value) by Schedule Line Delivery Date and display as above on a 12 month forecast basis from the day (sch line delivery daye) entered as a variable by the user.
I also need the first month to only show the dates in the month remaining including the date entered as a variable. The last month must go up to the day before exactly a year in front.
I have created the 12 months as a structure and can include the key figure and the schedule line delivery date. The schedule line delivery date for each period needs to be restricted. How can I do this to achieve the above?
Thanks in advance. Will assign good points for a speedy solution.
Best
Steve.

Hi,
    Check "OVLY" and "OVLZ" and If the sceduling is active for he shipping point /sales document type. Check "OVXD" and see If the Loading time/ Pick/pack time is determined from it. If they are getting determined from shipping point check the shipping point calender in "SCAL" .If it has saturday and sunday as holidays ,then you may have to change them. And check If the customer has goods recieving hours assigned to him (In customer master unloading point). If he has only 5 working days and If he accepts only goods at 8 am in the morining then system would propose like this.Kindly please let me know If you need any more Information on this.
Regards
Ram Pedarla

I want to pick up Schedule line Delivery date based on Sales Order of Mater

Hi Experts,
I have one scenario like,
I want to pick up Schedule line Delivery date based on Sales Order of Material.
For example :
Go to va03
Give the order no
Press the enter
Double click on material.
Go to Schedule line Tab
Then we can find out the Delivery date .
I want to pick up the that Delivery date. Could you please help on that.
Thanks,
Amjad.

Hi,
schedule line dates are available in VBEP.
VBEP-VBELN = sales order number.
VBEP-EDATU = schedule line date.
REgards,
Raghavendra

Schedule line delivery date

Hi ,
I am creating a order ( for which Delivery Not created ) for which schedule line delivery date is alloted . Which i can check in VBEP table .
But when extracting the data in 2Lis_12_VCSCL , the order is not coming . Is the extractor is correce or anyother way of checking ( check in rsa3 also )
Regards
Ankit

Hello,
the extractor 2LIS_12_VCSCL is correct to extract schedule lines information of a sales order. Check with your mappings.
Regards,
NK.A

Schedule Line Delivery Date Calculation with Transportation Scheduling

Hi All,
We are currently running into a problem where our Sales Order Schedule Line delivery dates are being pushed out too far into the future - because of the Calendar being used to determine the transit time.
We have 'Delivery Scheduling' and 'Transportation Scheduling' activated for our Sales Document type
We have Routes that are configured with a 'Transit Time' and a 'Factory Calendar'
Order Scenario:
'Factory Calendar' assigned to our 'Route' is setup with only one 'Workday' in a given week e.g. Wednesday
Our 'Route' has a Transit Time of 2 days
We create a Sales Order on Monday for a Material that is available in our Plant
The 'Goods Issue' date is being determined correctly for the next Workday - being Wednesday
The 'Delivery Date' is extending out over 15 days (2 Wednesdays into the future) - since it is working on 'Calendar Days' and not 'Actual Days'
Does anyone know of a way (config or other) to only influence the 'Goods Issue' date with the 'Factory Calendar' assigned to the Route, and have the 'Delivery Date' calculated using the Transit Time on the Route and 'Actual Days' rather than Calendar days?
All help greatly appreciated.
Thanks,
Ravelle<i></i>

Hi Pathik,
Thanks for your reply. I have already maintained the Calendars I'm using for this business process in <SCAL> - same as <OY05>.
The problem I'm having though is that by assigning a Calendar directly to my route (which I doing to influence the goods issue date - using a 1 Working Day Calendar) it is also taking precedence in determining the Transit time - which in this case I don't want, as I want my Transit time to be determined using a 5 Working Day Calendar.
I don't think this problem has a config option as a work around...I think the only possibility in this case is a development to achieve the results we need.
Thanks,
Ravelle

In VA01 In Schedule line Delivery date not getting populated

Hello,
We have developed enhancement for VA01 tcode.
Depending upon the quatity entered for a material it should show one more item as free good.
If quatity is 10 for a line item 10 then it should show item 20 by default same mateerial and quatilty as 1.We have done this it is working fine.
But if we select free good item in our case it is 20 and click on schedule line item buttom all quaitity fields getting populated.but delivery date not getting populated for only free good.for line item 10 it showing properly.
Can any one please suggest what i need to do in order to display delivery date for free good.
Thanks in advance.
Regards.

Thanks for your response.
Actually i have seen technical settings for that field.it is rv45a-etdat.this field has value till MV45AFZZ.seen in debugger.
Looks like it is clearing some where after the above include.Any suggisitions welcome.Thanks again.

Credit Release thru VKM3 remove the schedule line delivery block ...

HI Gurus,
I have created the sales order with the delivery block at the schedule line. i have save the order . The order goes to the credit block . So when i release credit block with the help of VKM3 then system also removes the schedule line level block.
This is not std behaviour . Can any one come across such scenario ?
Details: I have removed the routine 101 in the OVB8 so that if order goes to credit block still order will have the confirm qty.
Also in the OVAK order type is mark D for automatic credit check.
Thanks in advance

Hi ,
I have checked the sales order thru the program but we are not using any user exit for the same.
Now i have found that if the qty is confirm on the first date i mean on the date given then system does not remove the block & if the ATP check suggest the diff date so there are two schedule line in this case block get removed ..
May be this is like after credit removes system must be running the ATP check again ..
Please help

Delivery note field name and table name in MIGO

hi experts,
i want to fetch delivery note for my material document in MIGO.
Also based on MIGO delivery note NUMBER , i need to fetch MIRO document number i.e mir4 dcoument number.
kindly provide field name and table names for delivery note .
thnaks &r egards,
raghul

hi karthik,
Thanks for your quick reply.
Actually i developed a zreport which consists of fields
1. vendor
2. refrence
3. po
4. material
5. material document
6. qty
7. amount
8. movement type
9. plant
These data i fetched from MB51 by using submit logic.
All above fields are in one internal table.
Now Based on MB51 reference number , i want to fetch
1. MIR4 number
2. delivery note
IN MIR4 tcode.
Refrence number from MB51 and delivery note in MIR4 document are same .
kindly give me suggestions how to get delivery note and MIR4 number ( inv number) in MIR4 TCODE
thanks & regards,
Raghul

Regarding schedule line confirm qty

Hello ,
I am facing a problem ,that is when we create an order in CRM 2007, we are not able to see confirmed quantity check against the schedule line because of this order is not able to be processed
how can this problem can be solved
regards .

Hi Rags,
I have issue regarding schedule line like this .
in Schedule line i have two line
            Date                        qty                             Confirm Qty
Line 1 16.08.2011                1                                       0
Line 2 21.09.2011                0                                      1
Suppose we have created oreder on 16 th Aug so lschedule line 1 is triggerd on 16th Aug and other scedule line triggred on 21.09.2011 with confirm qty.
One Batch job run and update only line 1 like mat avalaiblity date, transpotration date, delivery date etc but not line 2. why ?
I have created PR on 21.08.2011 and Po on 26.08.2011 and material available in plant 5.09.2011 so why this batch job has not change the line2 and date for confirm qty. But it has not changed line 2. Why?
I have checked PR change log and found that item del date chaged from 21.09.2011 to .7.09.2011 but it is not chaged for line 2. Could you please tell me whre is the problem cone across?
thanks

Schedule Line(Delivery Schedule) generation stopped

Dear Experts,
We are using Scheduling Agreeements to procure materials from Vendor.We are using MRP(type PD) to generate our requirements.We have noticed that ,for a Schedule Agreement- MRP generates Delivery Schedules accordingly,but if user will try to interven the process by entering a manual schedule line with some quantity,and Fix Indicator is getting fixed,after that MRP is not able to generate Schedule Lines,henceforth.
We had done the same things earlier,but MRP was able to generate Schedule Lines even after manual intervention by user.We have not maintained Fix indicator in Source List also and the particular material and the Agreement both have been marked as MRP relevant against that Vendor in Source List.
If we will remove the open delivery schedules having Fix indicator fixed ,after that we run MRP,then the Schedule Lines are getting generated,but for those Schedule Lines(Manual or thorough MRP) having Fixed Indicator fixed and have GRN transaction completed,we would not be able to delete those and also MRP will not be able to generate Delivery Schedules.Please advice what is the reason behind this and share the full concept of Fixed Indicator against the same?
Regards,
Soumick

It looks we encountered very similar problem,one item line in our Scheduling Agreeements can't be driven by MRP MD02/MD41,but if we add another same line item under this SA, this new line can be driven by MD02,and generated delivery schedule line.
I don't know why. Please give me some light! Thanks!

Credit limit check cause the item schedule line confirmed qty empty

Hi,
I have an SO that is under credit limit check, the problem is, after releasing it via VKM3, the confirmed qty at item schedule line is not taking the qty as of stock at the time. The SO qty is 100 Pcs, but there's still stock of 80 Pcs. I will then need to split the schedule line to 2 lines --> 1st line with order qty 80 Pcs, and 2nd line 20 Pcs. Then only the confirmed qty appear for the 80Pcs.
For usual SO that is without credit checking, the confirmed qty will immediately shown as in 1 schedule line. Does anyone know why is this happening and can we amend this problem?
Thanks.

Hi
If an order is subject to credit check once you save the order the confirmed quantities becomes 0 because if the settings done in t code OVB8 Number of the routine used for copying is set as 101and System FORM routine number is set as 1 (and this is the standard settings)
This is kept like this in standard so that if a material stock is say 10 units and order from customer X has come for 10 units and that order is blocked on crediit limit so that when the next order from customer Y has come for another 5 units and this customer Y has a better credit limit and this order is not blocked on Credit limit check then she should not suffer for stocks
A genuine customer should not be deprived of stocks
For you between the order registered and released thro VKM3 another order has come from another customer for 20 units and hence the 100 units has become 80 now and balance 20 is confirmed for a future date thro forward scheduling
In T code OVB8 you can do the customizations for this scenario according to the business requirement
Regards
Raja

Change schedule line delivery date

Hello,
We are doing STO intercompany scenario, with ATP control, routing delivery in schedule lines.
If for example in Supplying Plant the delivery date is 2 month in the future, and we have dates and quantities confirmed in the STO, if this Plant creates the Outbound delivery and PGI tomorrow, how can the buying Plant will notice this situation?
Once PGI schedule lines in STO will not be ATP anymore and the delivery dates will be not be updated.
At schedule line level I can see the quantity was delivery but the delivery date it is not updated to the new one.

Hi Sukriti,
Thanks for the Response, yes i have used the Bapi Transaction Commit Also .
The point is I am able to Update the Statistical Delivery Date in the Same EKET table using BAPI_PO_Change .I have Checked all the Ways to update the EKET-EINDT(Delivery Date)but no Unable to do it.

Schedule line delivery date of sales ordere in production order-MTO

We have a Make to order scenario where item in sales order can have mutliple scheule lines on different delviery dates.
Ex : sales order 100020 and item no 0010
has schedules with schedule line dates as
10.04.2010----1pcs
20.04.2010---1pcs
03.05.2010----1pcs
When the planned orders are converted to production orders, the 1 del date (EDATU) in the all the three production orders is the same ie the earliest delivery date (10.04.2010), even though the delviery dates are different for three as shown above.
Is there a way we can show the indivdual delivery dates on all the three production orders.
production order 1----- 1 del date as 10.04.2010
production order 2 -
1 del date as 20.04.2010
production order 3 ---1 del date as 03.05.2010
Thanks in advance.
When a planned order is converted toproduction order

We have a Make to order scenario where item in sales order can have mutliple scheule lines on different delivery dates.
Ex : sales order 100020 and item no 0010
has schedules with schedule line dates as
10.04.2010----1pcs
20.04.2010---1pcs
03.05.2010----1pcs
When the planned orders are converted to production orders, the 1 del date (EDATU) in the all the three production orders is the same ie the earliest delivery date (10.04.2010), even though the delviery dates are different for three as shown above.
Is there a way we can show the indivdual delivery dates on all the three production orders.
production order 1----- 1 del date as 10.04.2010
production order 2 -
1 del date as 20.04.2010
production order 3 ---1 del date as 03.05.2010
Thanks in advance.

Schedule line- Delivery Qty Field Name

Similar Messages

Maybe you are looking for