Schedule time not saved

Hi, In cor1 screen if i enter the time as 01:50:00 like this, when i save observed that it is going back to 00;00:00 only. could you please advise how to save the same. Thanks.

Look at the scheduling parameters for your production order type in configuration.
cheers
Rav

Similar Messages

Scheduling time not coming as required

Hello All
I have an FG whose routing contains two operations, whose time are as under:
Optn       Base Qty       Processing time
0010       1EA               20 MIN
0020       1EA               15 MIN
As per my calculation the sys shall wind up the order of 2EA in 55MIN, but when am making an order of 2EA sys schedule it for 70MIN. System gives the operatino start time of 0020 operation after 40MIN have elapsed whereas this operation shall start only after 20MIN.
Looking forward to your valuable inputs to resolve the issue.
Regards,
J K Tharwani

Hi,
For this you need maintain overlapping in operation details of routing,
first goto operation details of operation 0010 - Maintain overlapping, i.e, select required overlapping, minimum overlapping time: 20 min, Minimum send ahead quantity as 1 EA.
if you do like this then system will schedule like this
0010, 1EA, 20 MIN HERE You Have 2 No's. After producing first component it will be sent to 0020 operation immediatley.
0020, 1EA, 15 MIN.
So first product after completing 0010 operatioon in 20 Min it will comes to operation 0020 and completes in 15 Min, so total time for first product is 35 Min.
Next Second productwill comes to operation 0010 immideatley after completing first product operation 0010 and again second product will comes to operration 0020 immediatley after completing first product operation 0020.
eg: at 10 AM we start.
Operation 0010 Product 1 Start Time : 10:00 AM End Time :10.20 AM
Operation 0020 Product 1 Start Time : 10:20 AM End time:10:35 AM
Operation 0010 Product 2 Start Time : 10:20 AM End Time :10.40 AM
Operation 0020 Product 2 Start Time : 10:40 AM End time:10:55 AM
In this way system schedules.
Regards
Jagadeesh K

I deleted my note by accident i do have notes on icloud. so i had half the note saved but the other half was very important and hard to right. i restored my ipod on i cloud back up but it still doesnt show i put so much time in that anyway to get it back?

i deleted my note by accident i do have notes on icloud. so i had half the note saved but the other half was very important and hard to right. i restored my ipod on i cloud back up but it still doesnt show i put so much time in that anyway to get it back?

How did you delete the Note? If you did a "select all" and "cut", open the Note and shake your iPhone to undo the cut action.

Pop Up blocker exceptions are not saved in the browser for use, the next time the PC reboots. How do you save these exceptions for long term use?

Pop Up blocker exceptions are not saved in the browser for use, the next time the PC reboots. How do you save these exceptions for long term use?

In case you are using "Clear history when Firefox closes":
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/remove-browsing-search-and-download-history
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
If you have software like Advanced SystemCare (Surfing Protection feature) that might reset some files to older versions to protect these files against changes then check the settings or uninstall this software.

In-house production time not considered in scheduling

i have a material, with an in-house production time of 7. requirements date is today, May 23. as a sap standard, using backward scheduling, it shall see that the start day lies in the past, and should switch to forward scheduling, with May 23 as the start date, and may 30 as the finish date. however, the system only proposes a finish date of may 27. why is the system behaving this way?

Hi,
Please let us explain, where u have carried out scheduling ie during the MRP or in Production order.
I hope ur asking about Production order scheduling , inthat case system will not consider the Inhouse production time. Because lead time scheduling is carried in production order.
Scheduling will be done for routing times not for In-house production time.
Pradeep

Some times my pictures was saved but some times not

Some times my pictures was saved but some times not

I know today when I was taked pictures I take some pictures with the Iphone locked and I take pictures with the Iphone unlocked some pictures was saved but some not and I doesn't know why?

TS4510 'Do not disturb' moon icon still stay on after my scheduled time.

I thought the 'Do not disturb' issue should have solved until I recently slide the 'Do Not Disturb' back to 'ON' and found that the moon icon still stay on after my scheduled time. Restarted the iphone5 (already running iOS 6.1.3) still showed the moon icon.
If the 'Do Not Disturb' is slide to OFF, with a schedule period being set (e.g. 22:00 - 07:00). The moon icon still appear from 22:00, no noise.
If the 'Do Not Disturb' is slide to ON, moon icon always show, phone still ring outside the scheduled period.
Is it what the 'Do Not Disturb' designed to work like this now?
Thank you.

'Do Not Disturb' ON
under Notification -> 'Do Not Disturb' Scheduled ON
at schedule time, moon icon APPEAR (~10 seconds delay), ring NOT from 'Favorites' PASS THROUGH
'Do Not Disturb' OFF
under Notification -> 'Do Not Disturb' Scheduled ON
at schedule time, moon icon APPEAR (~10 seconds delay), right NOT from 'Favorites' PASS THROUGH
'Do Not Disturb' ON
under Notification -> 'Do Not Disturb' Scheduled OFF
moon icon APPEAR
Allow Calls From 'Favorites', (test phone not on favorites)
phone STILL RINGS!
I think the above tests should proof that the 'Do Not Disturb' is not working except showing a moon icon.

When I close Firefox I choose Save and Quit to save my tabs for next opening. It's not saving them the last few times, wondering why?

Upon closing Firefox it asks me if I'd like to save and quit, quit, or cancel. I always choose save and quit. I've noticed the last few times that my tabs were not saved the next time I opened Firefox, I'm wondering why. I've lost some webpages I was saving for later now, because of this.

The computer crashes, due to power failure, with Firefox running. After rebooting, Firefox has lost record of tabs. [History/Recently Closed Windows] is grayed out. So the list of tabs is lost. It should be possible for the software to keep a periodic backup of current tabs, such as, e.g., MS Word makes backups of the current file every 10 minutes, so that the tabs can be restored if the software does not make a normal exit due to a computer crash.

TS4510 i5 ios 6.1 do not disturb, its working all time, not follow schedule.

My i5 ios 6.1 hv problem with do not disturb, its working all time, not follow schedule.

agility-gordons wrote:
any fix in the works?
No one here would have any way of knowing. Apple rarely announces plans for future updates.

Bakup did not start at the scheduled time?????

Hi all
Yesterday I scheduled my backup as usual at 1:00am and to my surprise the logs showed me that the backup was started at 9:30am in the morning............
In the morning when I tried to login I could not, I saw the status of the database it was shut down so I manually started the database which caused the backup that was started at 9:30am(which i could not see that it was running) terminated with errors.....................
Can any one please tell me how come the backup did not start at the scheduled time. However the backup of the next day was sucessfull.
Regards
Mahesh

Hello Jaipal,
I suspect that an 'sapdba' session or 'brspace' session was active on the OS level.
Some user must have kept this session active knowingly or unknowingly.
The offline backup was waiting for the active session to complete / end.
The session probably was ended / terminated around 9:30 am
(Maybe the user terminated the sapdba / brspace session at 9:30 in the morning after resuming the office work)
The backup started as soon as the sapdba / brspace session was terminated / ended.
Regards,
Ammey Kesarkar
<i>'Award points for useful info'</i>

I have a work website the I sign into and check my schedule, etc. Sometimes it opens and other times not., it uses webConnect to open.

I have a work website the I sign into and check my schedule, etc. Sometimes it opens and other times not., it uses webConnect to open.

Hi, papineaubill!
Welcome to The Canon Forums, and thank you for your inquiry!
We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market. If you live outside the United States, please click here and select your country or region for your support needs.
Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
Thanks for choosing Canon!

Do not disturb has stopped turning on/off at scheduled times

Do Not Disturb has stopped turning on and off automatically at the scheduled times.
I have not synced my phone since updating to the latest OS.

http://support.apple.com/kb/TS4510

Time Reporting Periods page - Status change not saving

I'm a Project Server 2013 Admin and I'm trying to change the status of some time periods from Open to Closed. When I select Closed for a few time periods and click Save, nothing happens thus my changes are not saving. What could be causing
this to happen and better yet, what is the solution to fix this issue? For accounting purposes I need to be able to close out time periods. Please help!

Hello Levesque
You must do what Prasana says, but it is also a bug and was fixed in a CU. It is described in the following blog.
http://carl-projectserver.blogspot.com/2013/07/projectserver2013-bug-cannto-close-in.html
Cheers
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Time Machine not saving all Users

Hi,
I have just used Time Machine for the first time and noticed that it was saving "x" of around 142gb as its first save.
However, I noticed that when I go through the back up history, whilst it saved my wife's account/user files it hasn't saved mine. The icon of my "house" in the Places section doesn't highlight when you scroll over it with the mouse. It does in the "Now" window.. but page through the back up history and it's not saved. My files are also not found in the Users folder.
Any help really appreciated.
Mark

Are you using File Vault?
That's the only reason TM won't save your home folder on each backup. It should, however, save the encrypted disk image when you log out.
If not, start with a Finder window showing your home folder, then go into Time Machine. It should appear that way.
And be sure you're not looking at the first (lowest) window in the "cascade" of the "Star Wars" background; that's the +Today (Now)+ window, representing what's currently on your system. Navigate to the actual backup (behind the Today window) or via the timeline on the right.
You might want to review these:
Time Machine Tutorial
Time Machine 101
How to back up and restore your files
Time Machine Features
Apple - Support - Mac OSX v10.5 Leopard Time Machine
and perhaps browse the Time Machine - Frequently Asked Questions *User Tip* at the top of this forum.
If you have a problem setting-up or using Time Machine, start with the Time Machine - Troubleshooting *User Tip* at the top of this forum. It will show you how to locate the message(s) that describe the problem, then help you fix it.

How to delete old schedule time of process chain after changing

I am try to change the schedule time of process chain on production but after changed the old schedule is still working (i.e. every day on 7 am I want change it to 6 am only) ,one process scheduled two time.
I want only last changed. How to remove the older one?
Thanks

hmm wierd...one more thing check if this process chain get trigger by anyother process chain by some abap program or any.
Check the table rspcchain to know if it has any meta chain or not. IF not follow the below steps :
make your process chain trigger based upon the event. Follow the below step.
1.SM64 ---> Create event -
> come to your process chain -> maintain the start variant -> event base---> give that event name here.Now we will be require to create the job which will trigger this event for this.
2.Let us take the below PC as example;
ZL_TD_HCM_004 -- This PC is running after event u2018START_ZL_TD_HCM_004u2019
3.Go to T Code: SM36 Here we define the Background job which will be available in SM37 after saving it.
4.It will ask for ABAP Program to be entered. Give it as Z_START_BI_EVENT and Select Variant from the list. (Based on Process chain, you can select it)
5.Then select Start Conditions and give the start time of process chain. and select periodicity.
6.Save the newly created job in SM36.It will be now available in SM37.
This should solve your problem now .. have fingure crossed
Thanks,
Deepak
Edited by: Deepak Machal on Dec 14, 2011 8:20 AM

Schedule time not saved

Similar Messages

Maybe you are looking for