Scheduled report name

Hi,
We have made a custom report for UCCX8.5, which we'd like to schedule. This report can only show the details of one CSQ, by selecting a CSQ filter. Because of this we'll need to schedule a new task for every CSQ. Here the issue arises: when I look at the scheduled reports overview, all reports have the same name: The name of the report. This makes it impossible to see which scheduled report is which. So it'll be really hard to delete or add one later.
Is there a way to change the name of the scheduled report task?
Regards,
Ruud van Strijp

This is one of a few scheduler-related limitations of the HRC. Another is that the machine running the client must be running and actively logged in for the system tray-based (i.e. not a windows service) scheduler app to trigger.
My advise on this one is to upgrade to the latest 9.0 build where you can switch from the legacy HRC client to the new Unified Intelligence Center (CUIC) reporting engine. This is a browser-based UI and was ported over from UCCE so now both products have the same reporting engine. As luck would have it, you can name the schedule when you create it with CUIC:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/intelligence_suite/intelligence_suite_902/user/guide/CUIC_BK_R4B100EB_00_reporting-app-user-guide-902_chapter_01000.html
With that said, you'll have to redo your custom report by spinning up a lab instance of CUIC Premium (not bundled with CCX) so you can create the report definition. Once you have that, you can import it into the embedded CUIC Standard instance on CCX and be good to go. The SQL stored procedure process remains unchanged.
In case you're inclined to dismiss this advice, note that HRC is EoL. In 9.0 you can pick one or the other but it's gone entirely in 10.0; CUIC only. So, it's only a matter of time before you have to cross this bridge anyways.
Please remember to rate helpful responses and identify helpful or correct answers.

Similar Messages

Details of Reports scheduled on SSRS (Report name, userdetails, frequency, etc)

Hi all,
Is there a way to find all SSRS scheduled reports details such as (Report Name, schedule time, mail IDs configured, etc.)?
Please help as we have many SCCM reports on SRS, and manual work will take very long time..
scorpITs | http://scorpITs.blogspot.com

Hey ucrajee,
Here is simple SQL query which will give you details on report subscription along with Subscription type, render format, next run date, time, email ID configured with subscription etc.
You need to run this SQL Query on your report server database.
SELECT
c.Name AS ReportName,
'Next Run Date' = CASE next_run_date
WHEN 0 THEN null
ELSE
substring(convert(varchar(15),next_run_date),1,4) + '/' +
substring(convert(varchar(15),next_run_date),5,2) + '/' +
substring(convert(varchar(15),next_run_date),7,2)
END,
'Next Run Time' = isnull(CASE len(next_run_time)
WHEN 3 THEN cast('00:0'
+ Left(right(next_run_time,3),1)
+':' + right(next_run_time,2) as char (8))
WHEN 4 THEN cast('00:'
+ Left(right(next_run_time,4),2)
+':' + right(next_run_time,2) as char (8))
WHEN 5 THEN cast('0' + Left(right(next_run_time,5),1)
+':' + Left(right(next_run_time,4),2)
+':' + right(next_run_time,2) as char (8))
WHEN 6 THEN cast(Left(right(next_run_time,6),2)
+':' + Left(right(next_run_time,4),2)
+':' + right(next_run_time,2) as char (8))
END,'NA'),
Convert(XML,[ExtensionSettings]).value('(//ParameterValue/Value[../Name="TO"])[1]','nvarchar(50)') as [To]
,Convert(XML,[ExtensionSettings]).value('(//ParameterValue/Value[../Name="CC"])[1]','nvarchar(50)') as [CC]
,Convert(XML,[ExtensionSettings]).value('(//ParameterValue/Value[../Name="RenderFormat"])[1]','nvarchar(50)') as [Render Format]
,Convert(XML,[ExtensionSettings]).value('(//ParameterValue/Value[../Name="Subject"])[1]','nvarchar(50)') as [Subject]
---Example report parameters: StartDateMacro, EndDateMacro & Currency.
,Convert(XML,[Parameters]).value('(//ParameterValue/Value[../Name="StartDateMacro"])[1]','nvarchar(50)') as [Start Date]
,Convert(XML,[Parameters]).value('(//ParameterValue/Value[../Name="EndDateMacro"])[1]','nvarchar(50)') as [End Date]
,Convert(XML,[Parameters]).value('(//ParameterValue/Value[../Name="Currency"])[1]','nvarchar(50)') as [Currency]
,[LastStatus]
,[EventType]
,[LastRunTime]
,[DeliveryExtension]
,[Version]
FROM
dbo.[Catalog] c
INNER JOIN dbo.[Subscriptions] S ON c.ItemID = S.Report_OID
INNER JOIN dbo.ReportSchedule R ON S.SubscriptionID = R.SubscriptionID
INNER JOIN msdb.dbo.sysjobs J ON Convert(nvarchar(128),R.ScheduleID) = J.name
INNER JOIN msdb.dbo.sysjobschedules JS ON J.job_id = JS.job_id
Let me know if you have any queries.
Thanks,
Sandip Shinde(Blog:bi-bigdata.com|Twitter:@CloudBI_Sandip)

Can we enable Database Name box while scheduling report

Hi, I am boxi administrator and I am working on a unique client requirement. I don't know if it needs to be in administration forum or crystal reports. we are using crystal reports and We are on boxi R2 SP3 on IIS.
We have 8 DB servers for load balancing ( look www.intersystems.com for details of how). We want to publish report in BOXI and user will then schedule report. We don't want multiple copies as it will be difficult to maintain at several places. So please rule out the possibility of 8 copies of same Crystal report connected to each 8 DB servers.
When user schedules report then we want to load balance the DB servers i.e. we have defined 8 ODBC connections on each application servers and want to use all ODBC ( DB) for each report. When we schedule reports then I see server name and Database name is disabled in Database logon properties.
Please let me know if this is possible. We will be using standard infoview to schedule reports.
Thanks,

This is not feasible. I figured out one option that is using Virtual IP with Load balancer. We can load balance ODBC using this. This is tested in another project of state govt.
Thanks,

How to modify 'Specified File Name' of a scheduled report

I run a daily scheduled report every morning and send it out as an emailed attachment. My problem is, I want the file name of the pdf attachment to include the previous day's date. How can I modify the 'Specified File Name' setting in the destination tab to reflect the previous day's date. I do not want to use %SI_STARTTIME% because that only shows the date&time that the report was actually run....I need the previous date. So far I am unsuccessful.
Thanks

Hi,
i think this is only possible via the SDK. I would recommend creating a Support Message with SAP to solve this issue.
Maybe there is already Samplecode available from the Support.
Regards
-Seb.

How to change the sender's name/email-id in the scheduled report

Hi,
We have SCOM 2007 R2. In the Reporting tab (SCOM Console), we have some scheduled reports. I need to change the sender's name/email-id in a scheduled report. When we receive the report through email, receiving with the person's name who moved out of the
team.
I tried to change but could not find the option to change while editing the properties in SCOM Console under Reporting -> Scheduled Reports.
When we are receiving mail from that scheduled report, instead of an individual name, would like to provide a generic name. Please help me out. Let me know, if you need more information.
Thanks,
Naren.
Thanks & regards, Naren.

Hello,
the SCOM scheduled reports feature rely on SQL Reporting Services. So, if you would like to change the SMTP configuration, you should go in SQL Reporting Services Configuration Manager:
Open in the Start Menu, Reporting Services Configuration Manager.
In the connection window, click OK.
Click on the tab E-mail settings.
Change the Sender Address.
Click Apply.
Alternatively, you could also change in the Scheduled report properties the field
Reply to. I think it should customize the reply address for each scheduled reports, but I have never used it. Anyway, doing it with Reporting Services Configuration Manager is more interesting in the long-run.

How to schedule another program by giving report name and variant name?

I want to create a program for Scheduling another program using function 'FASU_V_CREATE_VARIANT_RFC'
(FASU_V_CREATE_VARIANT_RFC : This function used for creating the variant ) by giving
1) Report name
2) varaint name
Could anybody please help me.??

Scheduling Background Jobs
Use
You can define and schedule background jobs in two ways from the Job Overview:
Directly from Transaction SM36. This is best for users already familiar with background job scheduling.
The Job Scheduling Wizard. This is best for users unfamiliar with SAP background job scheduling. To use the Job Wizard, start from Transaction SM36, and either select Goto ® Wizard version or simply use the Job Wizard button.
Procedure
Call Transaction SM36 or choose CCMS ® Jobs ® Definition .
Assign a job name. Decide on a name for the job you are defining and enter it in the Job Name field.
Set the jobs priority, or "Job Class":
High priority: Class A
Medium priority: Class B
Low priority: Class C
In the Target server field, indicate whether to use system load balancing.
For the system to use system load balancing to automatically select the most efficient application server to use at the moment, leave this field empty.
To use a particular application server to run the job, enter a specific target server.
If spool requests generated by this job are to be sent to someone as email, specify the email address. Choose the Spool list recipient button.
Define when the job is to start by choosing Start Condition and completing the appropriate selections. If the job is to repeat, or be periodic, check the box at the bottom of this screen.
Define the jobs steps by choosing Step, then specify the ABAP program, external command, or external program to be used for each step.
Save the fully defined job to submit it to the background processing system.
When you need to modify, reschedule, or otherwise manipulate a job after you've scheduled it the first time, you'll manage jobs from the Job Overview.
Note: Release the job so that it can run. No job, even those scheduled for immediate processing, can run without first being released.
For a simple job scheduling procedure, see the R/3 Getting Started Guide.

Nm-nam - Failed to generate scheduled report

Hello,
I am using an nm-nam in a 3845 running v3.6(1b)and I receive this error: Failed to generate scheduled report for report Top Conversations when I try to run a scheduled report at a specific time of the day. I am using the external dns name of the mx record for the mail server. I receive a test email message but I do not receive the scheduled report.
thanks

Here is the URL for the Creating and Viewing Reports for the NAM
Follow the guide it may help you
http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_software/3.5/user/guide/report.html">http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_software/3.5/user/guide/report.html

Error while scheduling report for SAP users

Hi All,
We have SAP authentication enabled in our BO environment. (BO XI 3.1 sp2 FP 2.6 on windows 2003 server).
There are some webi reports based on BW Bex queries that we are trying to run on behalf of certain SAP end users. This we are doing using "schedule for" option.
Now what is happening here is if the end user has logged in once in BO system ,it runs fine. But in case user has not logged in to BO (using infoview etc.) ,it throws error saying "incomplete logon data" . Also if user changes or reset his password in BW and if he doesn't login to infoview after that ,system throws another error "Name or password incorrect (repeat logon)".
Based on these observation, we are suspecting if BO system uses stored SAP users credentials while scheduling report for them based on their last login.
Would like to mention here that we have checked option "automatically import users".
Please advice if this behavior is normal or we are missing some setting.
Thanks in advance,
Chandra

Hi All,
Any pointers or suggestions for this issue ??
Is there a setting/option avialable in CMC which could resolve these errors.
Or, user has to login once to infoview in all circumstances to avoid these errors.
Thanks,
Chandra

Scheduled report issue

Hi,
I scheduled a work book with multiple worksheets in discoverer 4.1.47. After scheduling when am I opening, I found there is a sheet with no data. I checked the query from SQL inspector and its not showing the original query and its showing the below query . I normally opened the worksheet from discoverer desktop and its showing the query correctly, where as in scheduled report SQL inspector is showing the below..
Remaing all sheets are scheduled correctly.
Please let me know, why
SELECT BRVC2 as E_300, BRVC1 as E_308, BRVC3 as E214082, BRN1 as E214083, BRN2 as E214094, BRN3 as E214095, BRVC4 as E214097, BRVC5 as E214098, BRN4 as E214099, BRVC6 as E214100, BRVC7 as E214101, BRVC8 as E214103, BRVC9 as E214106, BRVC10 as E214107, BRVC11 as E214109, BRN5 as E214110, BRVC12 as E214111, BRN6 as E214112, BRN7 as E214114, BRVC13 as E214115, BRVC14 as E214116, BRD1 as E214127, BRVC15 as E214130, BRVC16 as E214131, BRVC17 as E214144, BRVC18 as E214146, BRVC19 as E215360 FROM APPS.EUL4_B100714054016Q2R1;
BR
Uma

Hi Uma
In standard Discoverer, when you create and run a worksheet the results are created dynamically. This means that the data is only available within the session that is running the worksheet. More importantly, the data is NOT available to any other worksheet whether within that session or not. However, if you use a scheduled workbook then the results from the worksheet are held in a temporary table until you remove the results or you delete the scheduled workbook.
Tables look like this: EUL5_B060914015847Q1R1
Views look like this: EUL5_B060914015847Q1V1
Note: these temporary tables are stored within the schema of the user who owns the workbook - not within the standard EUL schema. The format of the table is as follows:
EUL5_B060914015847Q1R1 which can be broken into six separate pieces.
These pieces are as follows:
EUL5_ B YYMMDD HHMISS Q9 R9, where
EUL5_ is a fixed name
B means Batch and is a constant
YYMMDD is the date that the worksheet was run,
HHMISS is the time when the worksheet was run, the time is in the 24 hour clock format,
Q9 means this is the letter Q followed by a number - E.g. Q1, which signifies the query number. I believe Oracle have some plans to allow multiple queries but for now this is always Q1,
R9 means this is the letter R followed by a number - E.g. R1, R2 and so on. This is the run number.
Using the above logic therefore, here is your example: APPS.EUL4_B100714054016Q2R1
This means this is result set number 1 for query 2, run at 5:50:16 AM on 14th July 2010.
So if you can figure out which worksheet was scheduled and when it was run you can build a view that sits on top of the latest table to give you the latest results. Something else which adds interest here is that the column names within the table do not match the column names as in your original query. The scheduled results column names use generic names such as BRVC1, BRVC2, BRD1, BRD2, BRN1 and BRN2.
These are codes and can be interpreted as follows:
BRCV1 and BRCV2 mean Batch Result Varchar (aka string) 1 and 2,
BRD1 and BED2 mean Batch Result Date 1 and 2,
BRN1 and BEN2 mean Batch Result Number 1 and 2
In SQL, try this: SELECT * FROM APPS.EUL4_B100714054016Q2R1 - do you see anything? If yes, there is data in the result set. If no, this means Discoverer found no data when it ran the scheduled workbook.
If you have no data in the results you have to determine why. Perhaps you are pulling from a secure view using a specific responsibility that was needed get at the data? A responsibility that would be needed during the scheduled run.
Hopefully this helps
Best wishes
Michael

Scheduled report is failing to be triggered via email in SCOM 2007 R2.

Hi All,
I have this strange issue. I have created a scheduled report from the SCOM reporting. It is a default report which comes in SCOM, It is the Most common alerts available in the Microsoft generic report library.
I also have the SMTP server configured in the Reporting services configuration manager as in the below screenshot.
The email relay server mentioned in that its self is used for our SCOM Alert email subscription as well and it works fine.
When i schedule the report and when it tries to send the report it gives the below error, Saying that "at least Senders / From field is missing or empty"
As you see i have mentioned a from / senders email address, But i still get that error.
I checked the RMS event logs but there are no related events for this issue.
Does any one have an idea on this ?
Gautam.75801

Make sure that the following
1.Verify that the Report Server Windows service has Send As permissions on the SMTP server.
2.In Sender Address of Reporting Services Configuration tool, enter the name an account that has permission to send e-mail from the SMTP server.
3. Moreover, check the event log of SQL reporting server
Roger

Scheduled Report Failing - Don't Know Why

I'm trying to re-create a scheduled report on CMC that had gotten deleted. It ran before (sometimes multiple times...) but at least it ran. I'm duplicating all the settings for this report based on how they were before, but every time I try to get the report to run, it fails.
I don't know enough about this to be able to embed any kind of error messages in the e-mail notifications we get. All I know is that no matter what I change/tweak/adjust, we get an email saying "This report has failed to run."
What kinds of things should I be looking at to troubleshoot? I know the report itself is fine, as users can view it normally (as in, through other viewers). There's definitely something specific to the scheduling process that is not correct, but I don't know what to look at.
Here is how the scheduling is currently configured:
Schedule > Main Tab
-Run Weekly, Tues - Sat
-Start Date: 10/01/08, 8:30 AM (I originally set this up yesterday, so today at 8:30 should have been the first time it ran, but instead it failed)
-End Date: 10/01/18, 12:00 AM
-Number of retries allowed: 0
-Retry interval in seconds: 1800
Schedule > Notification
-Email notification based on: a job has failed to run
-Message: Report failed to run. Scheduled Report: %SI_NAME% - %SI_STARTTIME% What other codes can we put in this message, BTW? I've been trying to look for something to return error codes, but %SI_OUTCOME%, %SI_STATUSINFO%, and %SI_ALERT_MESSAGE% don't display anything, they just print on the email
Schedule > Destination
-Destination: Email (SMTP)
-Clean up instance after scheduling is checked
-We have "Set the values to be used at schedule time here:" populated with our list of email addresses for recipients
-Attach object instance to email message is checked
-Specified file name: %SI_NAME%%SI_STARTTIME%.%EXT%
-Add extension is checked
Schedule > Format
-Format: Microsoft Excel (Still fails if we choose Excel Data Only or Adobe Acrobat)
-Use options saved with report is checked (Still fails if we deselect this)
Schedule > Schedule For
-Schedule only for myself.
Could really use some help here, as I don't know what in the world could be causing this to fail. Thanks in advance.

First thing is to forget all the complex configs and just try to schedule the report to run once now, no alerts, no notifications, no nothing.
Does that work?
Then you can build up the schedule, to see where the problem is coming from.
Sincerely,
Ted Ueda

Scheduled report failures - Unexpected error getting the HTTP response

Getting this error when scheduled report executes:
Unexpected error getting the HTTP response stream while generating report: http://cdmdb1c.nam.nsroot.net:4889/em/console/reports/render

Hi..
Thanks for the comment.
Below is how my web.xml entry looks like.
The requirement is to send a 404 error response and that will be handled by a servlet which inturn writes the output to the response object.
     <servlet>
          <servlet-name>ErrorPageServlet</servlet-name>
          <servlet-class>com.test.ErrorPageServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>ErrorPageServlet</servlet-name>
          <url-pattern>/error</url-pattern>
     </servlet-mapping>
     <error-page>
          <error-code>404</error-code>
          <location>/error</location>
     </error-page>>>
the first option to turn off the "show friendly html error pages" works fine.
It would be better if I can get a different solution

Payment schedule report

Dear friend,
i wants to know payment schedule repoprt where
Sr.No. Project name       Building name           apr-09           may-09        Jun-09     Jul-09      Aug-09
1      company code            plant name              %                %                %           %           %
it is a construction company, wants to payment schedule report .
here each project one company code .
client wants to see for project (co-code) how much amount expenses. each month (posting period).
2    Same thing how much received from customer.
please help me.

Hello,
One of the easiest option to see the expenses is laying in FBL1N.
You only need a nice setting in the selection fields.
1. Company code
2. Cleared items: the period you want
3. Filter only on the Cleared documents
4. Sort the result into the order of Cleared dates
You'll get the list of the paid items in date order.
Export to excel and separate per months.
Do it for all company cdes.
REgards,
Endre

Crystal Reports Server - Scheduling Report Exports

Dear Experts,
We are using Crystal Reports Server XI Edition and we would like to schedule report exports. Crystal Reports Server configuration console allows us to automate report exports but apparently we could not find a way to pass report parameters and formulas from any export management tab. Naturally, each report needs to take different parameters but to our knowledge CRS management console does not have a screen that prompts us to key in or to read dynamic report parameters and formula. It simply uses the default report parameters. Can you confirm this please?
To overcome this limitation, we are thinking of developing something like a script that directly interacts with CRS. The script would pass the name of the report, the report parameters and other relevant details like CMS username/ password.Do you think this is possible and if yes can you please point us to the key APIs required for scheduling report exports?
My sincere thanks for your assistance.
Kind Regards,
Joseph.

You are able to change the parameters for the report within the Central Management Console under the processing tab before scheduling.
Here is some sample applications that you can refer to in regards to doing this using the api:
[http://www.businessobjects.com/global/doc/dev_zone/Java_SApps_q405.zip|http://www.businessobjects.com/global/doc/dev_zone/Java_SApps_q405.zip]

Strange 9i behaviour on scheduled report

Windows 2000 server, 9ias RL 2, patches applied according Note 215882.1.
I have a report that used to run well in 6i (9ias RL1). It is a scheduled report. It takes current (system) month and year as parameters. In the After-Report-Trigger I run the same report using srw.run_report and replace current month with previous month.
Desformat=PDF, Destype=file, desname is generated dynamically depending on parameter value (e.g. monthly_orders_2003_10.pdf and monthly_orders_2003_09.pdf).
In 9i, the same report only returns the pdf output for the previous month (monthly_orders_2003_09.pdf) in the specified directory, but not for the current.
To make this more confusing: Both outputs (current month and previous month) are stored in the cache directory with randomly generated names (e.g. 41831406.pdf and 49155045.pdf).
Any hints are deeply appreciated.
Gerald Krieger

Theoritically this should reproduce even without scheduling ie in a client-server non-scheduled run.
1) Please see whether the child output is generated anywhere in REPORTS_PATH ( registry var in HKLM\software\oracle\Homex in Windows and env var in Unix ).
2) In srw.run_report() give full path name if child report and try
If it still does not work then it may be a bug. Please raise a TAR ( Technical Assistance Request ) with Oracle Support. If the issue is already fixed after 9.0.2.2 you can get a patch.
Thanks
Ratheesh
The statements and opinions expressed here are my own and not that of my employer

Scheduled report name

Similar Messages

Maybe you are looking for