Scheduling Agreement pricing condition PB00 value

Hi Experts.
Within pricing schema I do have pricing condition PB00 that is manually put in by the user. I have created a routine in order to calculate the PB00 value based on some logics and assign it to PB00 within the pricing schema.
So, if the custom logic are found, the price value should be change accordingly, if not the value put by the user will be kept.
The problem is that, at end of my routine the price is correctly calculated (let's say the user writes 2 and my routine calculates a price of 3) and the price is correctly updated on the scheduling agreement line field NETPR. But if i go inside the item to see the conditions I still see PB00 with the not-changed value.
Can anybody suggest? I am manipulating xkomv-kbetr and konp-kbetr.

Hi, Thanks for answering.
They are set so. But i need in any case to change the value of PB00 accordingly to my routine.The problem is that, at end of my routine the price is correctly calculated. PB00 value is 2 and it correctly recalculated by my routine to 5. on the SA item I see hte net price equal to 5, but if I go in the details I see condition PB00 still equal to 2.
Do you have any hints? thanks.

Similar Messages

Scheduling agreement pricing date category

Hi
i have a situation where the pricing date category in the additional data tab in scheduling agreement is defaulted to value 5 in display mode while i create a PO for certain vendors.
At first i checked for authorizations,but that wasn't helpful.
The field is in display mode when creating/changing an agreement.
pricing date category wasn't maintained in vendor master or info record for these vendors.
It happens only for certain vendors.
can someone tell me,how this is happening.

Hi,
The field price control cannot be changed for scheduling agreements
with time-dependent conditions, it is always set to '5' (GR date).
The reason is that the delivery from the vendor does not necessarily
cover exactly one scheduling line; in many cases several scheduling
lines with different delivery dates are affected - which delivery date
should the system take in such a situation? In other words: there is
no scheduling line based GR in the SAP system - therefore it does
not make sense to change the field.
Best Regards,
Arminda Jack

Scheduling Agreement With Condition Type Calc.

Hi All,
Can i have Scheduling Agreement With Condition Type Calc. as in PO Conditions as there are some calculation need to be made based on Excise.
Thanks in advance
Sapuser

Hi,
Condition in scheduling agreeement are time dependent where as condition in purchase order time independent so it's not possible to use.
Regards
Ravi Shankar.

Scheduling agreement pricing

Hi,
Pls tell me how the system will pick pricing in scheduling agreement. When i going to header condition system will give me message "
Not possible to determine a condition type
Message no. 06658
Diagnosis
The system was not able to find a condition type for the item. Price determination is therefore not possible.
Procedure
Contact your system administrator.
The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG): Define calculation schema
Pls tell me how i can enter the header level conditions like freight & discounts.
Regards,
Dinesh

Hi,
First check ur access sequence in your codition type.Check ur condition types are there in the RM0001 Condition Supplement Header and RM0002 Condition Supplement Price. Please include your condition types for the both procedures.

While creating scheduling agreement PO-Condition error

Dear Experts
While creating scheduling agreement PO , I am getting the following error
Condition JCDB is missing in pricing procedure A M RM0000, Please advise how solve this issue.
Regards
R.Rajakarthik

every thing is ok, for the same vendor already scheduling agreement there, when i tried to create copy with reference its ok there is no error . but when i tried create without reference i am getting the error.
and also the default conditiond also changing,
Create With reference : Gross price condion is P001
With out reference:Gross price condion is PBXX
were will be this link?, will you please tell me

Scheduling Agreement Pricing Procedure

I cannot understand how the pricing procedure picked in scheduling agreement, I know pricing procedure for PO picked from caluculation schema and schema determination can any one explain me complete process to assign pricing procedure to scheduling agreement please.

Hi
You need not enter the pricing procedure/tax procedure in SA(scheduling Agreement)
system will pick the pricing procedure from the setting you made for the combination of ur vendor and purch org.
In me31l go to conditions and you can enter reqd condition types in additional data screen you can enter the tax code
And the system picks the tax procedure from the assignment of tax procedure for ur country (company code)
while doing the schema determination u assign pricing procedure to vendor schema group and schema group og purchasing org conbination system picks the pricing procedure from tht settings.
the path is as follows:
Spro-Img-MM-purchasing-conditions-define price determination process-define schema determination.
for more info please go through these links
http://help.sap.com/erp2005_ehp_03/helpdata/EN/dd/5616cc545a11d1a7020000e829fd11/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/75/ee12df55c811d189900000e8322d00/frameset.htm
thanks..

MM Pricing Condition Type values in Condition Tab updation while CHANGE PO.

Hi,
The process of PO creation and PO change is through inbound IDOC posting.
I created a PO with configured MM pricing procedure.
While creating PO, the PO is created as required with different Condition Type value break-ups [PBXX, Discount, Surcharge etc] in the PO as required via Inbound IDOC processing.
While CHANGING the same PO, the Condition Type break-ups [i.e. pricing related values] in the PO are NOT changing in the PO via Inbound IDOC processing.
What needs to be done to update the Condition Type break-ups in the PO while changing PO through IDOC processing process?
This problem is not occured while manual / on-line changing of PO valueS and saving the PO & exists through IDOC processing method ONLY.
Thanks in Adv,
RK

Hi
Try this function module
FM RV_CHECK_CONDITION_VALUE
Regards
Hareesh Menon

Pricing : Condition type value need tog get from the lowest of 4 other cond

Hi,
I have one requirement in one pricing procedure.
I need to calculate condition value of one condition type from the lowest value of other 4 condition tyeps. These condition types values are not defined as a subtotal.
So if I decide to write a formula on condition values, is there
any way to select these values and choose the lowest of them?
Please also advice if there is any other way such as condition exclusion
or so?
Thanks and regards,
Anand

Anand,
As you have mentioned you can use condition exclusion for such a requirement.
here is a detailed description of how you can achieve this: use the menu path IMG> Sales & Distribution> Basic Functions> Pricing> Condition Exclusion> Condition exclusion for group of conditions.
When you execute this IMG acitivity you get a window with three options
1.Define Condition Exclusion Groups
2.Assign condition types to the exclusion groups
3.Maintain condition exclusion for pricing procedures
We will use these three options one by one, we start with the first
1. Define an exclusion group, lets say EX01 and give a description
2 Assign the four condition types that you want to compare to this exclusion group under this option
   lets say EX01 ZK01
               EX01 ZK02
               EX01 ZK03
               EX01 Zk04
3. under this third step, select the pricing procedure that you are working on and from the left margin click on 'Exclusion'. click on 'New Entries' and make the following entries (example)
         Sno.   Cpr         ExGr1
          10      A            EX01                leave ExGr2 blank, Save your entries
Check if your purpose has been met or not. Do give your feedback
Regards,
PATHIK

Pricing - Condition record value is differ from condfition value in billing

Dea All,
While checking one billing document, PR00 amount is 30 EUR per 1 PC and condition value is 43 USD, if i select the PR00 line item and goto condition records, iam finding the condition record value is 34 EUR per 1 PC...
I Dont no whta is happending here... Can you please put some light on this..
Thanks in advance..
Regards
Ramakrishna.P

1: Check PR00 in VK13 , if there are any scales maintained.
Else
2: Check PR00 in VK13, and go to Environment changes and check if the price is changed recently or any changes are made which you are not aware of. Also please check the condition type definition of PR00 using T Code V/06 and check how the pricing date is being mainatined.
Hope this helps
Sai

Reset a pricing condition type value when generating billing document

Hi experts,
I have a delivery-related billing type. In sales order, there is a pricing condition type Z001, with value = 100, I would like to reset it to zero when generating billing document. Is there any configuration or user exits can do this? Thanks.

Hello,
You can do this in BILLING provided , if the Condition type is Manual condition type
To achieve this you have to do some configuration in the condition types as,
Goto transaction code V/06 and select your condition type and maintain the MNAUAL ENTRIES as C which means you can process it manually and in the V/08 chose your pricing procedure and against your condition type check the Manal entry .
Now you can change the value of the condittion type to 0 in the Billing document.
Hope this is clear,
regards,
santosh

Schedule agreement pricing

Hi
Please explain the function of the Time dependent indicator in the Schedule agreement doc. type.
What is the effect of having and removing it for the Schedule agreement.
regards
arvind

Hi,
I would suggest you to check the note 456691.
Check the Customizing for the document type of the scheduling agreement
(Transaction OMED).A price determination only occurs during the creation
of the scheduling agreement if the 'time-dependent conditions' indicator
is NOT set.
Conditions in the info record and contract are master conditions.The
difference between quotations and scheduling agreements is made by the
document type (indicator 'time-dependent conditions').Master conditions
are limited to a certain validity period, have master data status and
are rather valid on a long-term basis.
Master conditions, which refer to more general price agreements such as
vendor, material type, ... (general conditions, Transactions MEK*), can
also be represented.
Generally conditions in purchase orders are document conditions.They are
only valid for this document.Document conditions are also available for
quotations and scheduling agreements if this is set in Customizing.
Regards,
Edit

FM to update schedule agreement pricing

Is there a BAPI or FM that I can use to update a schedule agreement in 4.7? BAPI_PO_CHANGE gives me an error saying it does not work for schedule agreements.
Thanks,
Matt

Hi Matt,
I am not sure of the exact function module; but BDC is not just next to direct table update. It plays an important role when it comes to the integrity of the data. In BDC, we are calling the transaction, which performs all the necessary checks(Such as the permitted values of a particular field, Foreignkey relation ship check etc etc) on data base table before performing the data base update. This is very crucial, since the direct table update will never check these kinds of checks on the table, and there is a possibility of updating the table with undesired values. So, it is always a better option to go for BDC, whenever possible, than a direct table update.
Regards,
Shiny Paul

Pricing Condition in scheduling agreement

Hi Gurus,
I'm working with scheduling agreements and I figured that whenever I create scheduling agreements, pricing condition PB00 gets defaulted to the scheduling agreement,
Can you guys be kind enough to tell me what configuration is driving this?? How can we make changes to the config settings so that I can have a condition type of my choice assinged to the scheduling agreenment??
More over I have a requirement to have a tiered pricing in scheduling agreement. I do know that this is driven by SCALES in SAP however as per my requirements I need to have SCALES per formulas. In the condition type configuration we do have a field for SCALES where we can assign the formulas but whenever I click on this field a screen pops up with some ROUTINES.
Can someone tell me how can I define the ROUTINES and the ABAP formula for this ROUTINE so that I can have my tiered pricing conditions accomplished??
Any feedback on this will be highly appreciated!!
Thanks folks,
Dhaval Joshi

Hi Ramesh,
Thanks for the heads up. I looked at the config for the schema dtermination and I see that the pricing procedure RM0002 has not been assinged to any vendor POrg schema in this configuration.
I then looked at the config for the condition type PB00 --> pricing procedure RM0002 has been assigned to the condition type PB00 and since we don't have any entries maintained for RM0002 in the schema determination config I was just wondering if this is what is influencing the automatic proposal of the condition type PB00 in my scheduling agreement.
Also can you please tell me what is a difference between a Purchasing Document (BIG) and Purchasing Document (Small) in the schema determination config.
All I wanted to accomlish here is my teired pricing to work when I assign scales on the condition type in the scheduling agreement ( not in the PIR)
What currently happening in my case is ....
Example: Scale From 1 pc - 100.00 USD
from 50 pc - 90.00 USD
from 100 pc - 80.00 USD
Target quant. 100 pc
schedule lines 30 pc
20 pc
The problem is that the goods receipt of 30 pc is valuated at the price 80.00 USD It always takes a lowest price on the scale.
I've tried looking for OSS notes and also looked enough on the forums but I could not get any resolution to this question.
I would appreciate if I could get any heads up from your side.
Cheers,
Dhaval

Pricing procedure for Schedule Agreement

Hi,
How do link the pricing procedure and its corresponding Conditions like (discount and surcharges) to the Schedule agreement LP.
Regards
MM

Hi,
Please check the below links...
Pricing Procudure for Scheduling Agreement
Scheduling agreement pricing
Hope it helps you..
Kuber

Planned Conditions in Scheduling Agreement

Dear Expert,
We are using Scheduling Agreement for external procurement of materials,for few materials Condition like ZNMC Cess are applicable,In Purchase Order these conditions are automatically pickup if it is maintain in MEK1,In Scheduling Agreement these conditions are not coming automatically,How to Maintain these conditions directly,Please advice
Regards,

SOLVED

Scheduling Agreement pricing condition PB00 value

Similar Messages

Maybe you are looking for