Scheduling infocube activation in background

It is taking too long and timeout when I tried to activate a SAP delivered InfoCube.  Can this be scheduled in background job?

Hi
Why are you trying to activate an Infocube. It is the DSO/ODS that you need to activate and not a cube. And by the way which process are you following to activate the infocube ???
There is something definitely wrong in whatever you are doing friend.
Cheers
Umesh

Similar Messages

  • How to schedule a report in background

    could anybody inform me
    how to schedule a report in background
    if possible plz send the entire step by step process
    thanx
    regards
    kals.

    HI,
    Use transaction SM36
    For step by step process refer this link...
    http://help.sap.com/saphelp_bw30b/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm
    Hope this helps!!
    Cheers
    Alfred

  • Scheduling a report in background and passing data for processing

    Hi all,
    Using code (in a report1) ...i  want to execute a report (report2) in background.....but at the same time i want to pass data (an internal table and a variable) to that report2.
    is it possible to pass data like internal table to a executable report and at the same time pass the data to that report.
    Thanks in advance.
    Thanks and Regards,
    Sushil.

    hi
    regarding  Scheduling a report in background check the below thread
    SCHEDULE THE ZREPORT IN BACKGROUND DYNAMICALLY
    regards
    chandra

  • How to schedule BDC program in background when we use GUI_UPLOAD

    Hi,
    I need to run the BDC program in the back ground. But my flat file is in presentation server and i am using GUI_UPLOAD F.M to upload data into I.T. How to schedule BDC program in background.
    Will anybody help me in this regards.
    Thanks in advance,
    Mythily

    You will either have to put your data file on the application server or make the directory of the presentation server available as part of the file system so that the background job will have access to it via OPEN DATASET... TRANSFER... CLOSE DATASET.

  • Write a program that would schedule another program in background multipul

    Hi All,
              I need to write a program that would schedule another program in background multipul times according to input we provided on different application servers.
    For ex:- In  table FKKVKP, i am having 2.1 millons contract accounts. I need to write a program(A) that should take 5000 contract accounts at a time as a input and schedule another program(B) in background with input of 5000 contract accounts. And program A ,again schedule program B on differrent application servers , till 2.1 millions contract accounts get used.
    Thanx in advance.
    Regards,
    Dilip Kushwah

    hi,
    1) Carry out the recording for the required transaction using SHDB.
    2) Use batch input method to create session this is done by three FMs
    bdc: open_group, bdc_insert, close_group.
    3) A session is created , which can be seen in transaction SM 35.
    4) Use the standard program RSBDCSUB to configure the session created in SM35.
    This way you can achieve your requirement.
    Check this links too for more information
    Batch input [http://help.sap.com/saphelp_nw04/helpdata/en/fa/097015543b11d1898e0000e8322d00/frameset.htm]
    [http://help.sap.com/saphelp_nw04/helpdata/en/4c/4c0e8a725311d396a80004ac96334b/frameset.htm]
    [http://help.sap.com/saphelp_nw04/helpdata/en/4c/4c0e8a725311d396a80004ac96334b/content.htm]
    Thanks
    Sharath

  • Process Steps to schedule the job in background

    What are the process Steps to schedule the job in background?
    Sai.

    You can set up the different step while schedule the back ground job. Each step will have the program name, variant.
    You can do his using transaction SM36 -> JOB WIZARD.
    Thanks,
    Srinivas

  • PSE remains active in background after exit. How can I stop the program completely?

    PSE remains active in background after exit. How can I stop the program completely?
    Is there any command line option to force PSE to stop completely after exiting the GUI?
    Opening the Windows Task Manager and killing the PSE process is not a solution!
    (Context: I want to start PhotoshopElementsEditor.exe from another program with an image filename as command line argument. This other program waits in background until PhotoshopElementsEditor.exe has finished and pops up again after that. Since PhotoshopElementsEditor.exe continues to run silently in background, the other program will never come back.)

    Hi - having the same problem with PSE process not ending on exit. Have you had any luck in resolving the issue?
    Any advice would be appreciated. TIA

  • How will you schedule the job in background?

    How will you schedule the job in background?

    Pls go to this link
    http://help.sap.com/saphelp_bw33/helpdata/en/4c/89dc37c7f2d67ae10000009b38f889/frameset.htm
    Step by Step
    http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
    An example of a complex process:
    http://help.sap.com/saphelp_nw04/helpdata/en/3c/63073c52619459e10000000a114084/frameset.htm
    process chains
    process chains
    Process chains
    http://help.sap.com/saphelp_bw30b/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
    Re: Ho to make a variable mandatory or optional?
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
    Thanks & regards
    nath..........

  • InfoCube Activation Problem

    Hi Experts,
    I used BI 7.0 version, i phased one problem with infocube.Data is uploaded from flat file.I uploaded 30 records from flat file.
    1) when i activated the InfoCube the activation is sucessfully completed.But the version is IN PROCESS (we have three version Active, Modified, In version)
    2) I activated the "InfoCube several times but the version is IN PROCESS
    3)In the Message Text : NO ACTIVE BIA INDEX AVAILABLE.NOTHING TO BE DONE
    4) Update and Transfer Rules all are in activated. When i scheduled the infopackage the message was :Data was Requested.Monitor is sucessfull again i phased one problem the 30  records status is Active<--->Inactive.How to change the Records status into Green color. I checked Process manually  also.
          In  Status tab All IDocs processed successful......
          In Details tab : Overall Status : Everything Ok (all are in green colour
    When managed data targets  In the Request ID tab status is Yellow. In the BI content functinal area i was not able to find  the InfoCube which was already creatrd .I searched InfoCube with technical name also.it showed to me  ~~No corresponding entires were nor found~~ How to get the infocube into BI content.Is the any realtionship between infocube and BI content could you pls  explain  to me .
    Thanks & Regards,
    Vikas.

    Hi,
    Try this.
    Make sure that the update rule, transfer structure, and related info objects are in active state. If you see the error message itself says that Update rules are inactive (Update rules from InfoSource 8PO_DSO for InfoProvider PO_CUBE are set to "inactive").
    This may help.
    Thanks,
    JituK

  • Problems with FI Infocubes activations

    Dear Reader.
    I am having trouble activating the FI infocubes (GL, AP, AR AA) in DEV, QAS, PRD.
    In BID the infocube looks active with active transfer rules, etc.. in the infoprovider list but when i double click the infocube it shows "in process". how is this possible. without noticing this initially, i transported the infocube from DEV to QAS and to BIP. How to activate the infocubes. I need to schedule the data in PRD from tomorrow and i am having this crisis. YouR help in this matter will be highly appreciated and also further, do i need to activate all the BCT objects again in DEV and then transport again to QAS & PRD.???

    Hi,
    There is no problem in having version as In progress.
    Object information :
    Save : Saved
    Revised Version : Active Version
    Object Status : Active executable
    If object information of your FI cubes matches with above mentioned statuses then you should be able to load data succesfully. You will get above statuses under Version tab only.
    Please let me know if you need more information.
    Regards,
    Viren

  • Schedule report MM60 as background job and send out in Excel format

    Hi there,
    I would like to schedule a background job for report MM60, then send to the user in Excel format.
    I know that we can enter the recipient in the job setting(SM36) but the report is send in HMTL format.
    Is it possible to send in Excel format?
    Thanks,
    Janice

    Hi,
    I think it's not possible from SM36 you better get help from ABAPer to get the require output.
    Also visit below thread for same issue:
    mail, output of spool as an excel attachment
    Regards;

  • Scheduled function module in background job

    HI all,
    I have created a function module(RFC) & Now I need to schedule it in background job, i have used fm job_open ,job_close  But through there i can only scheduled Reports  so pls gide me how to scheduled fm .
    regards,
    Anuj

    Hi Anuj,
    Check this one:
    Re: can i scheddule a function module(rfc)  in background
    Regards,
    Chandra Sekhar

  • How to schedule a program in background after 5 or 10 sec

    Hi All,
           Can anyone tell me how to schedule a program after 5 or 10 sec in background after the transaction is completed.
    It is not a custom transaction. I want to execute a Z program in background  in a BADI
    Regards
    Yathish
    Message was edited by:
            Yathish Gundlupet

    Programattically?   You can add this code to the end of your transaction(if it is custom, of course).
    report zrich_0004 .
    data:   sdate type sy-datum,
            stime type sy-uzeit,
            l_valid,
            ls_params like pri_params,
            l_jobcount like tbtcjob-jobcount,
            l_jobname  like tbtcjob-jobname.
    start-of-selection.
    * Get Print Parameters
      call function 'GET_PRINT_PARAMETERS'
           exporting
                no_dialog      = 'X'
           importing
                valid          = l_valid
                out_parameters = ls_params.
    * Open Job
      l_jobname = 'THIS_JOB'.
      call function 'JOB_OPEN'
           exporting
                jobname  = l_jobname
           importing
                jobcount = l_jobcount.
    * Submit report to job
      submit <your_program_name
           via job     l_jobname
               number  l_jobcount
           to sap-spool without spool dynpro
               spool parameters ls_params
                  and return.
    * Kick job off 10 seconds from now.
      sdate = sy-datum.
      stime = sy-uzeit + 10.
    * Schedule and close job.
      call function 'JOB_CLOSE'
           exporting
                jobcount  = l_jobcount
                jobname   = l_jobname
                sdlstrtdt = sdate
                sdlstrttm = stime
    Regards,
    RIch Heilman

  • Error after scheduling a job in background....

    Hi All,
    I'm trying to schedule background job and i m using code for scheduling  that job for ex-
    CALL FUNCTION 'JOB_OPEN'
          EXPORTING
            jobname          = g_name
          IMPORTING
            jobcount         = number
          EXCEPTIONS
            cant_create_job  = 1
            invalid_job_data = 2
            jobname_missing  = 3
            OTHERS           = 4.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        IF sy-subrc EQ 0.
          SUBMIT zrb_cc_clc_n_copy VIA JOB g_name NUMBER number TO SAP-SPOOL WITHOUT SPOOL DYNPRO
    WITH DESTINATION = 'HPMISPRT'
    WITH IMMEDIATELY = SPACE
    WITH KEEP_IN_SPOOL = 'X' AND RETURN.
    CALL FUNCTION 'JOB_CLOSE'
          EXPORTING
            jobcount                          = number
            jobname                           = g_name
           sdlstrtdt                         = sdate
           sdlstrttm                         = stime
            strtimmed                         = 'X'
    IMPORTING
      JOB_WAS_RELEASED                  =
    CHANGING
      RET                               =
         EXCEPTIONS
           cant_start_immediate              = 1
           invalid_startdate                 = 2
           jobname_missing                   = 3
           job_close_failed                  = 4
           job_nosteps                       = 5
           job_notex                         = 6
           lock_failed                       = 7
           invalid_target                    = 8
           OTHERS                            = 9
        IF sy-subrc <> 0.
         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    Still i am getting error message in job overview status cancelled
    Thanx in advance
    N.s

    check in transaction SM37 why this particular job was cancelled

  • SPO based on Infocube activation issue

    Hi All,
    I am getting below error while activating the SPO based on Infocube. We are on BW 7.31 SP03.
    Please let me know if you face this issue...
    Error message -
    Call of the method CONSTRUCTOR of the class CX_RSLPO_OPERATION_FAILED failed; wrong type for parameter MSGV3
    An exception with the type CX_SY_DYN_CALL_ILLEGAL_TYPE occurred, but was neither handled locally, nor declared in a RAISING
    Internal error:
    Internal error: CL_RSLPO_PARTITION GET_S_DBPART

    Issue has been solved after adding the below auth objects to role.
    S_RS_LPOA & S_RS_ISNEW

Maybe you are looking for