Scheduling Stopped in Discoverer

Hi,
I have scheduled some reports in discoverer. Scheduling was working perfectly.
But, the report which was running in scheduler has been stopped by killing the session. As the report was taking too much, we had killed the session.
After killing the session, reports which are scheduled are not executing. I have scheduled new report which is also showing status as 'Scheduled' and not running.
Please advice ...
Thank..
Ramesh C. Gnaji

Ramesh, that is indeed an interesting issue.
I would look at the following things.
1) Check dba_jobs to ensure that your jobs are in fact getting properly setup. It sounds like they are b/c you can still submit the job for scheduling, but its good to check your bases.
2) If you have pre-existing jobs that are not running utilize the functions to delete from dba_jobs and remove them. Sometimes its best (when feasible) to remove your current items that are not working properly and work up from the ground 1 step at a time.
3) Check your permissions in the discoverer administration application. Ensure that the user is setup properly to run scheduled workbooks. If you are utilizing a single user's schema (via batchusr.sql) to schedule your workbooks ensure that is in fact how they are getting scheduled. You can look at this under Disco Admin -> Security -> Privleges -> Scheduled Workbook tab. Lookup the user you are scheduling and ensure the option of where to save results is properly specified.
#3 is key b/c based on where you are specifying the target store of data it will try to exec the EUL5 packages for setting up and executing your scheduled item.
4) Ensure that in your target user(s) that you don't have uncompiled package states for the scheduling piece of discoverer. In 10g R2 (10.1.2) they would be packages such as eul5_batch_disco_admins, eul5_batch_repository, eul5_batch_rep_secure (when using a single schema to schedule/store).
Hopefully these items help you out. This is where I would start my troubleshooting. If you pass all of these criteria then start I would start to take a deeper look into logging/execution of the packages etc.
Regards,
Eric Cohen
Head of Reporting
ServiceMagic.com

Similar Messages

CUCM 8.6.2a SU2 Cisco CAR Scheduler stopped abruptly

Anyone seen this before on 8.6.2a SU2 (22900-9)
The Cisco CAR Scheduler stopped abruptly due to memory issue. I am not finding any bugs on this in the bug toolkit or release notes for SU3.
There is bug CSCtn99418 which is for the CARIDSPerfmon error but that bug is fixed in earlier 8.6.2 version.
There are no core dumps for this.
%UC_SERVICEMANAGER-2-ServiceFailed: %[ServiceName=Cisco CAR Scheduler][Reason=Service stopped abruptly][AppID=Cisco Service Manager][ClusterID=][NodeID=CM1]: Service terminated. AppID : Cisco Syslog Agent ClusterID : NodeID : CM1 TimeStamp : Thu Jan 09 14:13:24 CST 2014][AppID=Cisco AMC Service][ClusterID=][NodeID=CM1]:
%[FailureDetail=CAR Scheduler restarted, update ALL 2 job(s) with status: '-1','-3' to status: '-2'.][FailureCause=Update unfinished (InProgress / Scheduled) jobs from tbl_event_log.][JobName=2 VARIOUS JOBS][AppID=Cisco CAR Scheduler][ClusterID=][NodeID=CM1]: CAR scheduled job failed
%[ServiceName=Cisco CAR Scheduler][Reason=Service stopped abruptly][AppID=Cisco Service Manager][ClusterID=][NodeID=CM1]: Service terminated.
%[AlertName=CARSchedulerJobFailed][AlertDetail= FailureDetail : JVM status: [Max = 455.12MB, Total = 368.62MB, Free = 2.19MB (0.59%), Used = 366.43MB (99.41%)]. FailureCause : OutOfMemoryError while running the job [CARIDSPerfmon]. JobName : CARIDSPerfmon AppID : Cisco CAR Scheduler ClusterID : NodeID : CM1 TimeStamp : Thu Jan 09 14:13:12 CST 2014. The alarm is generated on Thu Jan 09 14:13:12 CST 2014.][AppID=Cisco AMC Service][ClusterID=][NodeID=CM1]:
%[FailureDetail=JVM status: [Max = 455.12MB, Total = 368.62MB, Free = 2.19MB (0.59%), Used = 366.43MB (99.41%)].][FailureCause=OutOfMemoryError while running the job [CARIDSPerfmon].][JobName=CARIDSPerfmon][AppID=Cisco CAR Scheduler][ClusterID=][NodeID=CM1]: Critical CAR scheduled job failed.

Hi,
The OutOfMemory alert points to the following
https://tools.cisco.com/bugsearch/bug/CSCta71863/?reffering_site=dumpcr
Symptom:
High memory usage on CAR Scheduler (carschlr) during auto-purging of partitions.
From "top" command:
PID USER PR NI %CPU TIME+ %MEM VIRT RES SHR S COMMAND
9182 ccmservi 17 0 6 142:11.79 14.8 459m 300m 7116 S carschlr
Possibly, the "OutOfMemoryError" message can be caught in the CAR scheduler traces. And/or Total JVM memory usage is close to Max JVM memory allocated for CAR scheduler. For example:
... JVM status: [Max = 246.56MB, Total = 244.88MB, Free = 3.87MB (1.58%), Used = 241.01MB (98.42%)]
...OutOfMemoryError seen somewhere during CAR Loader Run - Round #2648
Conditions:
When MAX_CAR_DATABASE_AGE setting is set lower than 34 (31+today+2) days, and loader is actively running with relatively light traffic. This setting is controlled via the CAR admin System -> Database -> Configure Auto purge page. Max Age of Call Detail Records below 34 days can lead to this condition.
Workaround:
Simply raise the MAX_CAR_DATABASE_AGE setting (configurable in CAR's automatic-purge page), to either its default of 60 days or a value higher than 34.
Further Problem Description:
When traffic is low, it does not hurt to keep the MAX age at the default of 60 days. General speaking, raise the MIN/MAX age setttings when call traffic is low, and lower the MIN/MAX age settings when traffic is high.
The bug is still not fixed , can you try applying the workaround if the setting falls under 34 days.
HTH
Manish

Scheduled Stop and Start all PI communication channels

Hi,
Is there a way to Schedule Stop all PI communication channels at perticular time and start back at pertuclar date and time?
or is it only a munual way? stop all sender communication channels? if so, how do i keep track of the channels proprties details? like automatic control, external control off etc?
Thanks.
Prema

Hi Prema,
You may try the below steps to start and start the channels automatically.
1> Open page http://<<hostname>>:<<portnumber>>/mdt/channelmonitorservlet
2> click on "Availability Time Planning" on right top of your page.
3> click on create. Fill up the requied details. Please note the below example is for the channel for which I want to be up only from Monday to Saturday and for only one hour on these days from 11AM to 12PM.
Go to "communication channels" tab enter the channel name as below and it will select the channels for which you want this schedule to work.
Activate this and in communication channel make sure that these channels are in "automatic control". You may do further trial on this and it should serve your purpose if your system has fixed start downtime and fixed start up time.

Hyperion Reports Scheduler stopped working after 4 years of reliable servic

Hello,
I'm puzzled by this, but today at 4:00 AM, the scheduler stopped working. I tried to manually restart the service to no avail. I rebooted the server, nothing. I reinstalled Reports (but selected retain configuration), yet nothing. I'm perplexed as this has been working without issues for 4 years. Next step is to check whether the IT group did a patch upgrade of the OS and may have caused this.
If anyone has an idea, pls forward. Many thanks.
Here's the content of the log file:
10-29 04:06:48 INFO JobServiceThread     Batch "Station Reporting\2006 MOR" finished at Oct 29, 2008 4:06:48 AM
10-29 04:06:48 INFO JobServiceThread     Detail status : Batch "Station Reporting\2006 MOR" was started at Oct 29, 2008 4:06:31 AM
Problems encountered in "Station Reporting\MOR\2008 MOR"
ADM Error processing results from query: 1
Batch "Station Reporting\2006 MOR" finished at Oct 29, 2008 4:06:48 AM
10-29 04:23:06 INFO SchedulerServerLauncher     Hyperion Reports 7.0
10-29 04:23:06 INFO SchedulerServerLauncher     Copyright(C)2000-2004 Hyperion Solutions Corporation
10-29 04:23:06 INFO SchedulerServerLauncher     All Rights Reserved
10-29 04:23:23 ERROR SchedulerServerLauncher     Error while starting Scheduler Server

schedule.xml must be deleted if it reaches 8 megs. Surprised that Hyperion did not come with something more intuitive.

Scheduling workbooks in discoverer desktop

I'm trying to figure out how to schedule workbooks to run and export the output to a folder in Discoverer Desktop, I see in many posts that it can be done easily, I just can't figure it out, can anyone help?
I did confirm with my DBA that we do have the DBMS_Job package installed.
When I click on schedule as a user I get the following message:
A workbook cannot be scheduled for the following reason(s) - summary refresh 'job_queue_processes' parameter is 0
I would appreciate any help you can offer.
Thanks,
Janet
email: [email protected]

Hi Janet
You do not need to have DBA privilegs to schedule workbooks and any user should be able to do this. Here is an article from my notes:
Setting up Workbook Scheduling
The workbook scheduling feature in Discoverer uses native features in the Oracle DBMS, and is therefore only available when running against the Oracle database. This feature uses the same highly scalable and reliable processing procedures ithin the kernel, since the summary management capability and the setup for both features is similar. These procedures use standard packages in the DBMS called DBMS_JOB.
To enable the processing procedures for workbook scheduling in Discoverer, follow these steps:
A. Grant Schedule Workbook Privilege to the user.
B. Confirm that DBMS_JOBS has been installed.
C. Specify result set storage.
D. Set the time period at which the process kicks in.
These procedures are described in the following sections:
A. Grant Schedule Workbook Privilege to the User
The user must be granted the Schedule Workbooks privilege in the Privileges dialog. Connect to the Administration Edition, and grant the Schedule Workbooks privilege in Tools->Privileges dialog.
B. Confirming that DBMS_JOBS is Installed
1. Log onto SQL*Plus as the Administrator, and execute the following SQL statement:
SQL> select * from all_objects where object_name='DBMS_JOB' and
object_type = 'PACKAGE';
If the statement returns no rows, use SVRMGRL to create the necessary packages.
2. From Windows XP or NT, select Start->Run.
3. Type in one of the following:
SVRMGRL
4. When in the DBA facility, type CONNECT INTERNAL.
5. Execute the following SQL statement:
SQL> start <ORACLE_HOME>/rdbms/admin/dbmsjob.sql;
SQL> start <ORACLE_HOME>/rdbms/admin/prvtjob.plb;
C. Specifying Result Set Storage
When a scheduled workbook is run, the results are stored in database tables
within the database. Result set data created as part of the workbook
scheduling process may be stored in one of two areas:
the user's own schema or a centralized schema.
User's Schema
In order to enable workbook scheduling in the user's own database schema,
the user requires the following database privileges:
Create Procedure
Create Table
Create View
To grant these privileges, do the following:
1. Log onto SQL*Plus or SQLDBA as the Database Administrator.
2. Type the following:
SQL> Grant CREATE PROCEDURE to <USER>;
SQL> Grant CREATE TABLE to <USER>;
SQL> Grant CREATE VIEW to <USER>;
SQL> Grant EXECUTE ANY PROCEDURE to <USER>;
SQL> Grant SELECT on SYS.DBMS_JOB to <USER>;
SQL> Grant EXECUTE on SYS.V$_PARAMETER to <USER>;
where <USER> is the userid of the person who is to be allowed to schedule
workbooks.
These privileges must be granted directly to the user and not to a database
role.
Advantages: A database limit can be specified on the maximum amount of data a
user can store in the database. If the result set is stored under the user's
schema, then you keep control over the maximum amount of space one individual
user can fill with result sets. If the user creates a scheduled workbook that
fills that space, it affects only his/her own scheduled workbook.
Disadvantage: The user is required to have the above privileges in the database.
Repository User's Schema
In order to enable workbook scheduling using a centralized repository user's
schema, the SQL script batchusr.sql must be run in SQL*Plus or SQLDBA as a
database administrator (such as, SYSTEM). This script creates a new user that
is granted the above privileges.
In addition, the administrator of the EUL must change the user so that the
Repository User property is pointing to the repository user's schema just
created. The centralized repository user's schema may be customized by the
database administrator for space management purposes and underlying data access.
NOTE: SELECT ANY TABLE access is given by the script batchusr.sql,
but this may be limited provided the repository user's schema is
granted access to the underlying data that will be accessed for
workbook scheduling.
The repository user created will not be able to directly schedule a workbook
through the User Edition.
Advantages: Each user does not need DML procedures to run scheduled workbooks.
Disadvantages: One user can potentially run a scheduled workbook that fills the
available result set space, preventing other scheduled workbooks from running
until it is cleared.
D. Setting the Start Time for Workbook Processing
The workbook processes run within the database on the server, and are
controlled by parameters in the initialization file of the Oracle DBMS
- the INIT<SID>.ORA file.
To limit the number of processing requests that can run simultaneously:
The parameter job_queue_processes specifies the number of concurrent processes to use to process DBMS_JOB. It controls the number of processing requests that can be handled simultaneously. The default value is zero, which means processing requests will not be created. You should set it to a minimum of 2 or more if you have any other applications that use DBMS_JOB.
You need more than one job queue process, because if one job fails for any reason, it may keep getting re-submitted, and thus, prevent everything else in the queue from being completed. If you want to have 10 simultaneous processing requests handled, then you will need to set this to 10.
The INIT<SID>.ORA parameter job_queue_interval is the time in seconds that controls how often the job processes wake up to process pending jobs. The default is 60, which is quite frequent. What you set this to depends on how frequently you want the process to wake up and serve the requests that have been made. Oracle recommends that you update the 60 seconds default to at least 10 minutes (a value of 600).
NOTE: This parameter also affects summary management.
To enable these parameters:
1. Locate the INIT<SID>.ORA file.
For example, on Personal Oracle7 the INIT<SID>.ORA file is held in
<ORACLE_HOME>\database. Its default name is INITORCL.ORA where ORCL is
the <SID> name.
2. Enter 2 lines into the file. For example:
job_queue_processes = 2
job_queue_interval = 600 (equivalent to 10 minutes)
NOTE: The summary management and workbook scheduling features both use this scheduling capability within the Oracle DBMS. The interval you specify and the number of concurrent requests affect both features.

Can't create scheduled workbook on Discoverer desktop

Hi ,All
I want to create a scheduled workbook on discoverer desktop(end user version) by....
1. grant privileges to user in the following
CREATE PROCEDURE
CREATE TABLE
CREATE VIEW
SELECT ANY TABLE
2. grant scheduled workbook to user in Discoverer Admin(Menu-->Tool--> Privileges)
when I launch discoverer desktop to schedule workbook ,I can select workbook, set time to run and set parameter but when I accept all parameter to schedule workbook .....the program show the error
"Internal EUL Error: TransError - Unexpected transaction error"
Anyone know what is the problem and how to solve it ?
Thank you,
Mcka

Hi
See the following link, maybe it helps you:
http://download-uk.oracle.com/docs/html/B13916_04/scheduled_workbooks.htm#sthref493
Ott Karesz
http://www.trendo-kft.hu

Scheduling Workbooks on Discoverer Viewer.

Hello guys
I know you can schedule workbooks in Discoverer 10g Plus, but can you do this in Viewer? If not, then does this mean that we must give all our users Discoverer Plus so that they can schedule their own workbooks? Users used to schedule their own workbooks on Discoverer 4i. Now we are upgrading to 10g and we wanted to give them Viewer access. How do they schedule workbooks in Viewer?
Thank for all your help..

Hi,
In Discoverer viewer you cannot schedule reports though you can retrieve reports that have been scheduled.
Users that have access to Viewer will also be able to access Plus by entering a Discoverer Plus URL. The users privileges are stored in the EUL and determine what features the Discoverer user can access, not which tool they can use. So if the user has read-only access to the workbooks in Viewer then they will also have read-only access in Plus.
Rod West

Scheduling Manager in Discoverer 4i plus 4.1.48.08.00

Hi
I am trying to schedule a discoverer report to run overnight using Discoverer 4i plus 4.1.48.08.00 and cannot find anywhere to do this . The only thing I can see is an option to open results for a scheduled report.
I know I can do this via Discoverer Desktop . The only problem is that the Accountant wants to run the report from his PC and he doesn't have Discoverer Desktop but has Discoverer Plus.
Is there any way around this ?
Thanks in advance.

Hi
The best free third party scheduler is the one native to Windows - typically called AT.
You'll find it here: Start | Programs | Accesories | System Tools | Scheduled Tasks
When you get there you should see a link called Add Scheduled Task
If you have a copy of my Oracle Discoverer 10g Handbook (which is more than 75% valid for Discoverer 4 end users and 95% valid for administrators) you will find a complete work flow for setting up third party scheduling Discoverer using AT.
I also have a paper on mu downloads page that talks about third party scheduling : http://ascbi.com/downloads.htm
Best wishes
Michael

Scheduled refresh of Discoverer Portlet is failed

Hello Experts,
I am now facing an issue while refreshing the Oracle Discoverer Portlets. thay are scheduled to run at specific intervals.
I am getting the following errors
Main Error for some portlets
5014> Element not found for: {cn=cf_a104, wbf=1, fm=xml, nlsl=en-us, aow=false, eul=EULNAME, arq=false}
For some other portlets.
5004> Attempt 1. CORBA protocol : 0 of 1 processes started.
Other portlets
5015>
I searched in the google but didn;t find any solution for this.
Please let me know if you have any inputs on this issue.
Thanks & Regards
Salih KM
Message was edited by:
kmsalih

Thanks for your input.
I got one document from Metalink.oracle.com
Note ID is 266540.1
I will post a reply if required.
Thanks & Regards
Salih KM
Message was edited by:
kmsalih

Script to delete expired or errored scheduled workbooks for Discoverer

Hi All,
Can any one pont me to find a script to delete all expired and Errored workbooks in Database for discoverer?
Appreciate all your assistance.
Thankks
-S

Hi Asim,
I don't think you can share the results of the scheduled workbook using Desktop. As for Plus, when you're signed on as the other user are you in the same database & eul and are you looking for "scheduled workbooks"?
Brent

Backup Schedule Stops after 12 am-Dbacockpit

Hi Guys,
I am having strange issue on my server.
System:BW
OS:Windows 2008
Database :Sybase ASE 15.7
I have schedule the automatic full backup let say 6.30 pm after business hours and transaction log every hour which I have scheduled at 6.45 Pm .The full backup and transaction log backup works fine every hour but after 12 am ,the transaction log stops that means the last backup will be till 11.45 pm .I don't find any log information in Dbacockpit as well as in ASE.log.
Any suggestion or any one has gone with same kind of issue.
Thanks
Asim

Hi Asim,
please check and follow the instructions which are provided in SAP Note: "1912165 - SYB: Discontinuous execution of scheduled jobs" if you are running Sybase ASE 15.7.0.110 or higher.
If run an ASE version lower than 15.7.0.110 try the following workaround:
1. Delete the existing reoccurring job
2. Schedule a new reoccuring job (e.g. every 1 hour) which starts at the next day 00:00: o'clock
3. Schedule a new reoccuring job (e.g. every 1 hour) which starts at the current day next full hour and ends current day at 23:59 o'clock.
Best regards
Christoph

Re-scheduling workbooks from Discoverer Admin

Hi All,
We have Discoverer integrated with Oracle Applications.
When logging into Discoverer Admin as EUL owner, it is possible to re-schedule workbooks scheduled by other users by navigating to 'Tools->Manage Scheduled Workbooks...' and clicking on the 'Edit' button for a workbook. It allows to change date/time of when the report should be executed and successfully updates the Discoverer meta-data tables in the EUL. However, the dbms job associated with the workbook is not re-scheduled, so the report is executed at the original time.
I am not very familiar with the Discoverer, but my feeling is that it is not properly configured in our installation. Any advise on how to fix this issue would be greatly appreciated.
Thank you.
Denis

Hi,
You can move the workbooks by using a Discoverer export/import from Administrator.
Rod West

Scheduler stops working

We are running Oracle 10g and are making use of the Oracle Scheduler to execute stored procedures every second. On one server we used the enterprize manager to set up the schedule and it works fine and it work continuosusly with no issues for weeks.
We use the script generated by the EM on the first server to create the same schedule on a different server (This other server does not have the enterprise manager installed). The schedule will work fine when started but when it runs out of work to perform it will halt and not start up again.
Details of the scheduled task: When the task is run it will look for records in a table with a COMPLETION field = N. For each row it finds it will process the record and then mark the COMPLETION field with a P or F for Pass or Fail. It will work until there is a lull in records. After this lull the task does not appear to process new records. Dropping the job and re-creating the job makes it start working again until the next lull.
Below is the generated script that works on the server with EM installed and fails (after a while) on the server without EM. Is there an Oracle Scheduler configuration setting that could cause this behavior?
Thanks , Jeff M.
BEGIN
sys.dbms_scheduler.create_job(
job_name => '"TMDBB"."SD_LOAD"',
job_type => 'STORED_PROCEDURE',
job_action => '"TMDBB"."SD_LOADER"',
repeat_interval => 'FREQ=SECONDLY',
start_date => systimestamp at time zone '-7:00',
job_class => '"TMDBB_LOADER"',
comments => 'Load SD data once a second',
auto_drop => FALSE,
enabled => FALSE);
sys.dbms_scheduler.set_attribute( name => '"TMDBB"."SD_LOAD"', attribute => 'raise_events', value => dbms_scheduler.job_failed + dbms_scheduler.job_stopped + dbms_scheduler.job_disabled);
sys.dbms_scheduler.set_attribute( name => '"TMDBB"."SD_LOAD"', attribute => 'logging_level', value => DBMS_SCHEDULER.LOGGING_OFF);
sys.dbms_scheduler.set_attribute( name => '"TMDBB"."SD_LOAD"', attribute => 'job_weight', value => 1);
sys.dbms_scheduler.enable( '"TMDBB"."SD_LOAD"' );
END;
Edited by: user3976941 on Jun 12, 2009 12:55 PM
Edited by: user3976941 on Jun 12, 2009 1:22 PM

try
exec dbms_scheduler.run_job('"TMDBB"."SD_LOAD"' , TRUE);i guess i misread your posting. my question to you is are you running the same code on the same database or different database?
Edited by: Warren Tolentino on Jun 12, 2009 4:11 PM

Discoverer Viewer and Scheduled workbooks error

Hi
Hope someone can help.
I am scheduling workbooks in Discoverer Plus 10.1.2.48 with the intention of viewing them in viewer.
The report shows itself as running okay in Admin, but when I open the report in Viewer or Plus I get errors including:
ORA-03106 Fatal two task communication error
or
"unable to generate sql for this scheduled workbook"
I suspect they might be retrieving fairly large result sets (10 K rows +)
Please can anyone offer advice on how to resolve this?
Many thanks

Hi Tim
Well just the way the file is put together, like is it using SID= or SERVER=, does it use SERVER=DEDICATED, do you have one ADDRESS= or multiple?
To make sure everything is right, rename both TNSNAMES and SQLNET.ORA files, then suse Net Configuration Assistant to set up a connection. Then compare that with what you have already and make the necessary changes.
I also noticed that Russ has made a posting concerning a similar error. You should take a look. Its either in here on the Discoverer forum.
Best wishes
Michael

Discoverer Scheduling Workbook failed.... advise needed please

when I try to schedule workbooks on Discoverer 10.1
Database Error - ORA-04068: existing state of packages has been discarded
ORA-04063: package body "TKDBA.EULL_BATCH_USER" has errors ORA-06508: PL/SQL: could not find program unit being called ORA-06512 at line 2
System: XP Pro SP2
Desktop Client 10.1.2456c
End User layer Library - 10.1.2.45.46c
End User Layer - 5.1.1.0.0.0
Edited by: ControlV on May 22, 2009 6:07 AM

Hi
Thanks for this. A couple of things come to mind. First, it looks like you may have done more than one installation of the Discoverer 10g Admin / Desktop Install and it also looks as though you have an older Discoverer sitting out there, presumably a Discoverer 4 version. How did I spot this?
Firstly, the name you are using for you 10g installation is BIToolsHome_2. This tells me that you either have 2 or you had a failed install number 1. If you happen to be calling the executable from the first install with the PATH set to the second install this will cause a problem.
Secondly, Discoverer 4 always installs using the ORANT folder.
I am not sure what you have inside d:\oracle\bin or even in c:\oracle\discoverer\bin. These could definitely be causing problems elsewhere but probably not impacting Discoverer 10.
10g Discoverer Admin / Desktop needs these 4 entries in the path and these are there, albeit againt BIToolsHome_2 and not 1:
C:\oracle\BIToolsHome_1\bin;
C:\oracle\BIToolsHome_1\jlib;
C:\oracle\BIToolsHome_1\jre\1.4.2\bin\client;
C:\oracle\BIToolsHome_1\jre\1.4.2\bin;
First things first, we need to verify that you don't have an old version 1 hanging around.
Right-click on the icon to start Admin. In your case it should look like this: C:\Oracle\BIToolsHome_2\bin\dis51adm.exe
Right-click on the icon to start Desktop. It should look like this: C:\Oracle\BIToolsHome_2\bin\dis51usr.exe
Please verify the above and let me know if everything looks right.
Best wishes
Michael

Scheduling Stopped in Discoverer

Similar Messages

Maybe you are looking for