Schema of a new Object Type: message pass the BIU without validation

Hi,
i've defined a new Object Type for send messages to Web Service. I've created the schema files and i've uploaded there in repository with the "Import" function of GUI. After, i've defined the XML file for the "Execute" function of the B1i GUI.
After the load of files, in the repository the files are in correct position.
In my BIU the definition of sender and receiver system type is correct, and also the definition of SenderMainObjectTypeID and ReceiverObjectTypeID. The message from B1 pass through the IPO chain without problems and the message is received by teh Web Service.
If modify the file XSL into the BIU, a message with less elements than a schema pass without problem.
If delete the schema from repository, the message pass without validation.
I would know because the schema is bypassed...
Thans

Ok,
solved with introduction of validation point in a customized IPO using a branch / unbranch atoms.
Bye.

Similar Messages

S/A bridge problem: No object type found for the message

Hi all,
I've been spending days looking into the following problem. I have a RFCXIFile scenario. The R3 system sends data via an RFC to XI and XI post the data as a flat file on a certain server using FTP.
This scenario worked just fine for 1 exception. I could only run this scenario once. The second time I got timeouts when checking the data sent to my RFC destination using SM58. When I reactivated my RFC communcation channel I could again send 1 RFC to the system. All subsequent tries would fail.
I guess this is due to the fact that I use a synchonous call (RFC) to an asynchronous one. Thus the adapter is still waiting for the response from the XI system and will not accept any further new calls from R3.
So I figure let's use this pattern called the S/A bridge. So I designed everything according to guides and examples and I'm quite certain everything is configured right but when I run the scenario I get the following message:
<i> 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error></i>
It seems that the adapter cannot find any integration process to send the message into!?
I've looked at numerous threads on sdn and tried all kinds of stuff (looked at the cache==> code 0 = OK , tried to reactivate my integration process, checked the interface determination,...), but to no avail. Does anybody has an idea what could be wrong ?
Any help would be greatly appreciated for I'm all out of clues....
Bob

First of all, Thank you for trying to help me out here.
Some answer to your suggestions/questions:
The IP has return code 0 in SXI_CACHE. so that doesn't seem to be the problem.
I've checked the BPM for syntax errors. I doesn't have any.
I've reimported the BPM into the integration directory.
And did a full cache refresh in SXI_CACHE. Return code is (stays) zero, so that's OK.
I've already included the error message from SXI_MONI. It is in the last step ("Call Adater") that the error occurs.
The other steps execute just fine...
The RFC communcation channel accepts the incoming RFC call and puts into the pipeline, so no problems with the communication channel either. the problem is actually when the pipeline is trying to forward the message into an IP trhough the BPE_ADAPTER (according to SXMB_MONI).
Therefore I'm not able to go to into PE, because the workflow is never started. the BPE_ADAPTER does not find any active process for the interface determination i've entered.
So i can not debug the IP in the PE and check container variables, like some of you mentioned.
Maybe some more information about the scenario:
The RFC is called from an R3 system to XI over the interface "CONTROL_RECIPE_DOWNLOAD", which is an imported RFC, with a request and response message type.
Then I got a receiver and interface determination with lead the incoming RFC message to the IP, into interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI".
This is an abstract synchronous interface based on the request and response types of the "CONTROL_RECIPE_DOWNLOAD" imported RFC.
This interface is used the first step (receive) of my BPM as the synchronous interface to open the S/A bridge.
The message (container var) used in this step is
name: CORREQ
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI" is an abstract, asynchronous interface based on the request type of the "CONTROL_RECIPE_DOWNLOAD".
Then there are 2 send steps for putting the flat files into place and finally i close the the S/A bridge using message:
name: CORRES
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI" is an abstract, asynchronous interface based on the response type of the "CONTROL_RECIPE_DOWNLOAD".
I hope this information gives you guys a better understanding of hte problem.
Really looking forward to see more suggestions and to solve this nasty problem ...
Regards,
Bob

No object type found for the corresponding message in BPM

Hi All,
I have a BPM scenario where i pick a file and based on a condition in the Switch i send the meesage to Mail or Proxy.
When i tested the scenario i got error as "no object type found for the message check the corresponding process activated" error in the call adapter step.
I checked in sxi_cache, IP is active with 0 as return code .
When checked in sxmb_moni_bpe, under process selection it says "No workitem exists"
In SXMB_MONI, under inbound i clicked PE but got error as "Unable to perform action fro the selected Message" is displayed.
Im new to BPM so please tell me as what Im missing exactly.
Thanks

Hi Sachi,
Delete the Integration Process from ID and reimport it. Also check the status of your BPM in T Code SXI_CACHE....if return code is not '0' then re-activate your integration process..
Try REPEAT ACTIVATION on SXI_CACHE...
Have a look into this..
Re: Stuck in BPM Transformation process Async to Sync Scenario
Regds,
Pinangshuk.

Adding new object type (field BKPF-AWKEY) for BAPI posting

Hi everyone,
I am posting to SAP GL using an input file to read the data and transfer it to BKPF and BSEG tables.
The problem is I have to use BAPI_ACC_DOCUMENT_POST, and it expects values for OBJ_KEY and OBJ_TYPE.. For now, OBJ_TYPE creates a problem, because if I use BKPF, it says it cannot post using this object type, as it is for SAP internal use only.
Does anyone know how to add a new object type for the customer namespace, which can be manually used for this kind of posting? I know that the new entry must be made in tables TTYP, TTYPT, and possibly TTYPV, for which the maintainence view exists: V_TTYPV.
How to add an entry here, or where can I find it in customizing?
All helpful answers will be awarded.
Thank you very much
Srdjan

perform fill_internal_tables.
if check_l = 'X'.
call function 'BAPI_ACC_DOCUMENT_CHECK'
       destination dest
       exporting
            documentheader    = gd_documentheader
            customercpd       = gd_customercpd
            contractheader    = gd_fica_hd
       tables
            accountgl         = it_accountgl
            accountreceivable = it_accountreceivable
            accountpayable    = it_accountpayable
            accounttax        = it_accounttax
           currencyamount    = it_currencyamount
            criteria          = it_criteria
            valuefield        = it_valuefield
            extension1        = it_ext
            return            = it_return
            paymentcard       = it_paymentcard
            contractitem      = it_fica_it.
           extension2        = it_ext2
           realestate        = it_re.
write: / 'Result of check lines:'.                        "#EC NOTEXT
perform show_messages.
endif.
if check_a = 'X'.
call function 'BAPI_ACC_DOCUMENT_CHECK'
    destination dest
    exporting
      documentheader    = gd_documentheader
      customercpd       = gd_customercpd
      contractheader    = gd_fica_hd
    tables
      accountgl         = it_accountgl
      accountreceivable = it_accountreceivable
      accountpayable    = it_accountpayable
      accounttax        = it_accounttax
      currencyamount    = it_currencyamount
      criteria          = it_criteria
      valuefield        = it_valuefield
      extension1        = it_ext
      return            = it_return
      paymentcard       = it_paymentcard
      contractitem      = it_fica_it.
     extension2        = it_ext2
     realestate        = it_re.
write: / 'Result of check all:'.                          "#EC NOTEXT
perform show_messages.
endif.
if post = 'X'.
data: l_type like gd_documentheader-obj_type,
        l_key like gd_documentheader-obj_key,
        l_sys like gd_documentheader-obj_sys.
if dest = space or
     dest = gd_documentheader-obj_sys.
   post synchron
    call function 'BAPI_ACC_DOCUMENT_POST'
      exporting
        documentheader    = gd_documentheader
        customercpd       = gd_customercpd
        contractheader    = gd_fica_hd
      importing
        obj_type          = l_type
        obj_key           = l_key
        obj_sys           = l_sys
      tables
        accountgl         = it_accountgl
        accountreceivable = it_accountreceivable
        accountpayable    = it_accountpayable
        accounttax        = it_accounttax
        currencyamount    = it_currencyamount
        criteria          = it_criteria
        valuefield        = it_valuefield
        extension1        = it_ext
        return            = it_return
        paymentcard       = it_paymentcard
        contractitem      = it_fica_it.
       extension2        = it_ext2
       realestate        = it_re.
    write: / 'Result of post:'.                             "#EC NOTEXT
    perform show_messages.
else.
create Idoc
    it_receivers-logsys = dest.
    append it_receivers.
    call function 'ALE_ACC_DOCUMENT_POST'
      exporting
        documentheader    = gd_documentheader
        customercpd       = gd_customercpd
        contractheader    = gd_fica_hd
      tables
        accountgl         = it_accountgl
        accountreceivable = it_accountreceivable
        accountpayable    = it_accountpayable
        accounttax        = it_accounttax
        currencyamount    = it_currencyamount
        criteria          = it_criteria
        valuefield        = it_valuefield
        extension1        = it_ext
        paymentcard       = it_paymentcard
        contractitem      = it_fica_it
       extension2        = it_ext2
       realestate        = it_re
        receivers         = it_receivers
      COMMUNICATION_DOCUMENTS =
      APPLICATION_OBJECTS     =
      exceptions
        error_creating_idocs    = 1
        others                  = 2 .
    if sy-subrc = 0.
      write: / 'IDoc created'.                              "#EC NOTEXT
    else.
      write: sy-msgid.
    endif.
endif.
endif.
if rev_p = 'X' or rev_c = 'X'.
data: rev like bapiacrev,
        rev_key like ref_key.
rev_key       = ref_key.
rev_key(1)    = 'R'.
rev-obj_type = gd_documentheader-obj_type.
rev-obj_key   = rev_key.
rev-obj_sys   = gd_documentheader-obj_sys.
rev-obj_key_r = ref_key.
if rev_c is initial.
    if dest = space or
       dest = gd_documentheader-obj_sys.
      call function 'BAPI_ACC_DOCUMENT_REV_POST'
        exporting
          reversal = rev
          bus_act = gd_documentheader-bus_act
        tables
          return   = it_return.
    else.
      it_receivers-logsys = dest.
      append it_receivers.
      call function 'ALE_ACC_DOCUMENT_REV_POST'
        exporting
          reversal                      = rev
          busact                        = gd_documentheader-bus_act
        OBJ_TYPE                      = 'BUS6035'
        SERIAL_ID                     = '0'
        tables
          receivers                     = it_receivers
        COMMUNICATION_DOCUMENTS       =
        APPLICATION_OBJECTS           =
        exceptions
          error_creating_idocs          = 1
          others                        = 2
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      else.
        write: / 'IDoc created'.                            "#EC NOTEXT
      endif.
    endif.
else.
    call function 'BAPI_ACC_DOCUMENT_REV_CHECK'
      exporting
        reversal = rev
        bus_act = gd_documentheader-bus_act
      tables
        return   = it_return.
endif.
write: / 'Result of Reversal Posting:'.                   "#EC NOTEXT
perform show_messages.
endif.
commit work.
chk this
Give points if useful

New Object Types for Object Links

Need to create new Object type to object link Product hierarchy from ECC to RPM Item. Field is PRDHA.
Do we need to create new structure to have the Key linking PRDHA.
Any suggestions?

Hi,
For this, you need to create Key, Proxy class and search field.
Logically if you use same Proxy class and key as that of PO then the system will search for PO number rather than PR.
I hope you are clear now.
Take help of an ABAPer
Niranjan
Let me know if it helps !!!

PDR Steps to create new object types

We set a demo instance of the PDR tool here and it all works well.. I would now like to add purchase info records as an object that can be sequenced with all other master data like materials, material boms, variant class and ecms in a config folder. I know that new function modules would need be created but was wondering there was a document with steps expaining the entire procedure for doing this or if any other company has yet tried this with the tool.. It allows for the creation of new objects for the packet but would like to have some sort of guideline to follow if possible.

Hello Mr Thorne,
I knew there are some SAP Consultants that know how to implement a new object type. And there is a project together with the german army that expands the PDR with several object types.
But you have to pay attention. The PDR consists of two main parts . The FOX - Frame work of Explosion and the UPS - Uniform Packaging Service.
Creating a new Object type that can be "shipped" has to be in the UPS - BUT - if you are using the transaction CRWBD that new object type will not be found if you are exploding a baseline. That is the task of the FOX.
And to add a new Object type into the FOX would be harder than add it into the UPS.
I think the Consulting solution, uses a FOX exit to add that object into the UPS after the FOX-Run.
I you need further information please contact SAP consulting (PLM).

Exception '1250' is not defined for method 'CREATE' object type 'MESSAGE'

Dear experts,
I set up the document distribution (SWU3, backgroundjob SMTP, activated the workflows, flagged the linkages, etc). Now, I have still a error:
Exception '1250' is not defined for method 'CREATE' object type 'MESSAGE'
Does anyone know what the cause of exception 1250 could be?
Thanks in advance and kind regards,
Samuel

hi,
SAP ITS is SAP Internet Transaction Server which provides connection between SAP ERP system and html client.
Check with bassis, i think TCP/IP or work station application not configured yet. i guess?
Benakaraja
??P

Organizational structure : create a new object type

Hi all,
i need to create a new object type in Organizational Management, anyone have documentation, link or some helps to this subject.
Thanks,
Cheers

Small correction
Personnel ManagementOrganizational Management-Basic settings-Data Model Enhancement--Maintain Object Types
T-code OOOT
Edited by: Sikindar on Jul 30, 2008 3:57 PM

New object type, subtype, relationships

HI all,
I'm trying to create 2 new object types (job group and job discipline), and the relationships between it, but I'm getting some problems with that.
time constraint of infotype 1001 for the new relationships are wrong... and in the relationship between types i'm getting "relationship xxx is not possible between 8A and 8B - my new object types).
Can someone help in this thread?

hi.
i already do that...
http://img14.imageshack.us/img14/249/48633078.jpg
http://img269.imageshack.us/img269/8433/13735493.jpg
something is not right...
maybe you can do a small step by step indication

New object type creation...in MASS transaction..

Hi,
I want to create new object type for Maintainace plan mass mainainace how to do it....can anybody tell me..??
In standard MASS transaction i am not getting object type for Maintainace plan
Regards,
San Rao..

hi
O1CL-->select Table you asscosiate with class type( If it it not exists the click on New Item)
->Lets consider that it is MARA>double click on Plant->click on object types>click on New Item--->click on Object
Similerly maintain class status,Org Area etc
You can also check the existing class for Example...this will help you.
Regards
Sujit

How to add new Object Type In Mass

Hi Expert,
We have to required change Payment term of Customer (ZTERM) in scheduled Agreement,
we have gone through Mass, but presently no object type available to change in scheduled Agreement, So can we add the new object in Mass? & How? Please help.
Regards
BK GAIKWAD

Hi,
Presently no standard object type avaialble for Sch. agr.(Sales)
Go for BDC for updation of your field (try with LSMW also)
Thanks
Chidambaram

Is there a way set the object type defaults in the Profile Matchup (PEPM)?

Our users would like to have the Profile Matchup (PEPM) default the object type to P (Qualifications profile of Person) and S (Requirements profile of Position). Currently launching PEPM defaults to U (user) and S (position). Is there a way to change the default value from U to P using a PID? or some other method?
Thanks in advance,
- Lora

Hi Lora,
I can't think of a way without changing the program behind it.
Regards,
Priya.

Will a new IPAD work out of the box without syncing it to a computer?

While I understand the reason for syncing an IPAD to your computer via ITUNES, I was wondering if the IPAD will work out of the box without syncing? I bought an IPAD for my wife for Christmas and she wants to sync it to her work computer (her own small business). She's new to Apple and she doesn't have an ITUNES account yet. By the way, she knows she's getting an IPAD for Christmas. We don't want to go to her work on Christmas day to get her IPAD "going."
Question: Can she open the IPAD on Christmas day and have it work or will we have to get her an ITUNES account and have her sync it to her work computer prior to Christmas for it to work on Christmas day?
I would prefer to keep it boxed up until Christmas but I'd like her to be able to use it on Christmas day and then after Christmas go to her work to download ITUNES and sync it to her computer.

I purchased an iPad with 3G for a family member without a computer with Internet connection who lives in a rural area where 3G is available. I shipped the iPad however upon receipt the only thing he could do with it was charge it. Due to physical limitations related to a medical condition he rarely leaves his residence. The marketing for the iPad implies a stand alone capable device, however, until I was able to visit several months after shipping the iPad the family member was not able to use it. During my visit I took the iPad to an AT&T store and they were able to set it so it showed the icons and allowed setup of Interner access. I can understand the Wi-Fi version likely being purchased by someone that already has a computer with Internet access, but the 3G should be able to funciton out of the box as a stand alone unit and it does not.

Buying a new Mac off eBay - Will the warranty be valid?

Good Afternoon,
I know this may not be the ideal place to ask - But maybe some people have wondered the same and know the answer?!
Im looking to buy a new Mac - I've been a great deal for a new sealed MacBook Pro with a Retina display.
Will purchasing a Mac in this fashion effect the warranty at all?
I'd like to also purchase Apple Care a little further down the line (once my bank balance has recovered some what). Again - Would this be possible?
Cheers,
Dave

The warranty will be valid within one year from the original date of purchase. this is the date that the device was purchased either from apple or an apple authorized reseller.
you are able to purchace the applecare protection plan within one year of the original date of purchase as well, provinding there is no accidental damage to the device.
This page pertains to your question:
http://www.apple.com/support/products/faqs.html
hope it helps.

Is it possible that someone could redirect someones email account, and screen the messages over the internet without their knowledge.

Is it possible that someone could redirect someones email account, and screen the messages without their knowledge.

Call it phishing or not, any website designed to emulate another with the primary goal of obtaining one's personal information through deception is easily accomplished. You called it a façade, which is as good an description as any. It can be performed with most an hour of work, and uploaded to any server willing to host it. They have been known to be attached to legitimate websites, often educational institutions for which security is lax, and in which many people with too much time on their hands have sufficient privileges to modify the site at will.
Constructing a more elaborate website that faithfully reproduces a secure webmail page populated with functional links would simply take more effort with probably more individuals working on it, but it is by no means beyond the realm of possibility.
Perhaps the Apple Genius was describing something different, or not, but the point is that it is certainly possible for someone to screen or otherwise view your email messages. It's simple, given just a couple of pieces of your account information. The most common means of obtaining that information is through deception, a low-tech social exploit that has been with us for thousands of years.

Schema of a new Object Type: message pass the BIU without validation

Similar Messages

Maybe you are looking for