School and Home Installation
What is the ruling (in the EULA) about having an installation of a CS on more than one computer? Both are my own, but with CS4 coming up and the 64-bit being Windows only, that gives me a reason to install it on both my laptop and my PC, one for portability, the other for screen space.
http://www.adobe.com/products/eulas/
English section 2.4 - 2.5 answers the question.
Desktop/laptop install ok for only primary user and Desktop/laptop not used at same time!
Similar Messages
-
Help!!!! I am downloading word for Mac from my school and the installer program froze
Help!!!! I just bought my Mac earlier today and I began to download a free copy of Word for Mac. The download went great, but the installation is not working. I received a pop up saying I had to close Safari in order to continue. I closed it, hit the continue button and installer froze. Now the pop up keeps blinking on and off and I have this black and white spinning wheel of death. Also the time of the installation keeps increasing. Please help!
Print Shop for Mac
-
my ipod was working just find i came home from school and a tried playing my favorite game then next i know i turn all white i turn it of i saw my lock screen pic then tried to unlock but all white someone help me plz and my home button is stuck
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Can you have two Apple IDs on one IPAD? One for school and one for home?
Can you have two Apple IDs on one IPAD? One for school and one for home?
If so do you know how to do it?It depends on what you want to do.
You could, for example, have one AppleID for iCloud backup [and therefore message syncing, notes syncing, etc] and a second one for iTunes [music, iBooks, etc].
But if you are looking for a way to flip everything between different appleIDs, then no. -
Serenityvalley wrote:
You need to go to This Page and download just about everything on it -espeically the System Update Deployment Guide and start reading. It'll take you a few hours to learn what you need to do and implement it if you are familar with editing system registeries and you have some luck and everything goes well.
You do NOT need to edit registry, just use Thin Installer instead of System Update on the clients. And there is no need to wade thru the deployment guide if you are setting this up in a home environment for just one or two clients.
Edit: Note that Thin Installer does not run on Vista SP2 (neither does System Update.)
Here are the few simple things you have to do:
1. Download Update Retriever (UR) and Thin Installer (TI) from here.
2. Install UR on one pc and TI on all clients you want to keep updated. UR installs into the Start -- All Programs -- Thinkvantage folder, TI installs into c:\program files\thininstaller.
3. To initialize Update Retriever:
a) specify the download folder, pick a place all clients can access. Create a new folder, TI will be confused if there is other stuff in it.
b) change the settings to Severity -- Optional (assuming you want to see critical, recommended and optional downloads in the list), License -- Do not display and Status -- Active. After clicking next you enter the machine type, the op system and its language for each client you need to keep updated. Note that unless you change status to active everything will download as "test" and thus not be installed by the Thin Installer.
4. Run the download, about 1 - 1.5GB for the first type, opsys and language combination and an additional 0.5 - 1GB for each additional type depending on amount of overlap. You can be selective what you download but if you are an average home user -- just download all the items for your type/opsys/language combination(s) -- Thin Installer is a stripped down version of System Update and will decide what to install on the individual client. This is a one-time download, next time you run Update Retriever it will just download new drivers.
5. To initialize TI on each client, copy the program from the Program Files directory and paste a shortcut to the desktop. Then rightclick on the shortcut and choose Properties, and in the target field of the shortcut tab after "C:\Program Files\ThinInstaller\ThinInstaller.exe" add the following: -repository your_UR_download_directory.
6. Run the Thin installer on each client, it will perform exactly as System Update did, down to making the same mistakes that System Update did.
7. As the date is getting close when Windows Update will start distributing Vista SP2 you may want to consider using Microsoft's SPBlockerTools preventing SP2 installation for up to 12 months.
8. Debugging Tips
TI ending with message An error occurred while gathering user information is reported when running under Vista SP2 -- TI will not run in SP2.
Getting TI to "see" the database downloaded by UR is the main problem. If TI ends with a message saying corrupt or not found database you probably made a spelling mistake in the directory specified in the -repository parameter. If TI ends with a message saying no applicable packages to install it can mean a number of things:
a) If you are unused to modifying the parameters in a shortcut you may have added -repository to the second field in the shortcut tab instead of the top field labeled Target, the two fields look very similar or you just made a typo in "-repository".
b) Open UR again and first choose Modify settings on the left and double check that the directory there is the same directory you specified in -repository. Then choose Manage repository -- Update view and double check that all packages have status Active. If they don't it's not necessary to download again, just select all and hit the modify button to change status from Test to Active.
c) In C:\Program Files\ThinInstaller\logs there are update logs from TI. Open one using Notepad and in edit menu search for the string
Message: 'Share name' to use:
This will tell you in which directory TI is searching for the updates. If it can't find a -repository parameter it uses an empty default databse
d) If you used System Update regularly up to when it stopped working on April 1 and if you have an older model with not so many new driver updates it may actually happen that there are no new updates for your machine (even though you downloaded a lot.) Go to here and enter all fields except model to see what Lenovo shipped after April 1. (Don't click on driver matrices, staying on the downloads and drivers pages will give you a list in chronological order with the ones after April 1 at the top.) Also be aware that the database UR downloads from is at least 2 weeks behind when the drivers first become available on the web. Right now, the only new download in the database applicable to most notebooks after April 1 is the Access Connections 5.22 driver. To check what release you have installed open Access Connections and go to help.
I just did a clean install of a Vista64 system on my T500 and after installing the first few drivers manually (including drivers for harddisk and ethernet) let Thin Installer install the remaining 36 items for me. The only item left to fix was the known bug in the Ricoh 4 in 1 card driver SU installation. (For a clean install you need to run TI or SU more than once, it doesn't find all drivers the first time.)
Message Edited by JaneL on 05-08-2009 10:30 PM
Message Edited by zilla on 2009-05-28 12:48 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.koolzero wrote:
When I start TI after I pointed it to my repository I get a message that no packages applicable were found. I did not download all the updates just a few to test it, will it not work unless all updates are downloaded?
Did you change status from test to active in UR before downloading? If not you can change the downloaded items in the manage repository menu.
Assuming the items you did download were not already installed on your client with TI it should work.
Message Edited by zilla on 2009-05-06 10:23 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500. -
I can't connect to the router in my home. The Ipad seeks the network but nothing happens. I went to school and connected to their WiFi network as usual with no problems. When I returned home I could not connect to my home router. The Ipad seeks the router number but nothing happens. I rebooted the Ipad a few times in the school. The numbers identifying the router, etc. on my Ipad no longer appear there.
TThe Ipad guide says to connect to the WiFi use setup but I can't find the setup program in the Ipad.
I reset the network settings to the factory defaults but this doesn't fix the problem.
What can I do to reconnect to my home router?Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
i upgraded my ipad to ios7 in school and it told me i cannot acsess my ipad untill i connect to itunes all it shows is a charger cord an arrow pointing up to a itunes symbol when i came home i plugged my ipad into my computuer and went on itunes idk wat to do from hear on out someone please help
The iTunes icon and cable indicates that it's gone into recovery mode : http://support.apple.com/kb/ht1808
If you haven't got the current version of iTunes installed in your computer then download and install it (http://www.apple.com/itunes/download/) , and you should then be able to reset your iPad and restore/resync your content to it.
If you computer still doesn't recognise your iPad then try the troubleshooting on these pages :
PC : http://support.apple.com/kb/TS1538
Mac : http://support.apple.com/kb/TS1591 -
i walked out of school and i was trying to get on my phone but it would not cut on.It was just a black screen.So when i got home and put it on the charger it keep vibrating but still a black screen. I called apple and everything i tried to restart still nothing HELP!!!HELP!!!!HELP!!!! i want my phone back
Did you ever figure out how to turn your phone on? Mine died today around noon for no reason. I'm so mad at it! I can't get it turned on, and I KNOW the battery is charged. Suggestions? I'm going to the genius bar (another trip completely out of my way) tomorrow morning. Suggestions?? Oh and please don't tell me to hold the "home" button and the "power" button together because I've been doing that all day. It doesn't work.
-
[Solved] Organize the /etc/ /opt/ and /home w/o breaking anything?
+ What are the common organizing tactics that you use?
For example, if you're going to install anything, where do you put it, how do you do it with out breaking anything, etc.
My /etc/ /opt/ and /home folders are getting out of hand.
For my home folder, I have:
Desktop, Downloads, Dropbox (the only ones that I want here), meteor, node, nvm, nplay, pkg, python2-psutil, python26, src, sublime-text-2, try-meteor, packer (file), pacman.conf (file), and dead.letter (file).
How do I move these without breaking anything?
For my /etc/ I have:
adjtime (file), adobe, anacrontab (file), arch-release (file), asound.conf (file), at-spi2, avahi, bash.bash_logout (file), bash.bashrc (file), bash_completion.d, binfmt.d, bluetooth, ca-certificates, ca-certificates.conf (file), chromium, colord.conf (file), conf.d, couchdb, cron.d, cron.daily, cron.deny (file), cron.hourly, cron.monthly, cron.weekly, crypttab (file), cups, dbus-1, dconf, default, depmod.d, dhcpcd.conf (file), drirc (file), enviroment f(ile), fonts, fstab (file), fuse.conf (file), gai.conf (file), gconf, gdm, geoip, group (file), group- (file), grub.d, grub-cutomizer, gshadow (file), gshadow- (file), gssapi_mech.conf (file), gtk-2.0, gtk-3.0, host.conf (file), hostname (file), hosts (file), ifplugd, iftab (file), ImageMagick-6, inputrc (file), iproute2, iptables, issue (file), java-70openjdk, kernel, krb5.conf (file), ld.so.cache (file), ld.so.conf (file), ld.so.conf.d, libnl, libreoffice, locale.conf (file), locale.gen (file), localtime (file), localtime (file), login.defs (file), logrotate.conf (file), logrotate.d, lvm, lxdm, machine-id (file), mail.rc (file), makepkg.conf (file), man_db.conf (file), mdadm.conf (file), mercurial, mine.types (file), mke2fs.conf (file), mkinitcpio.conf (file), mkinitcpio.d, modprobe.d, modprobe.dconf (file), modules-load.d, motd (file), mtab (file), nanorc (file), netconfig (file), network.d, NetworkManager, ncsd.conf (file), nsswitch.conf (file), obex-data-server, odbc.ini (file), ODBCDataSources, odbcinst.ini (file), openldap, os-release (file), pacman.conf (file), pacman.d, pam.d, pango, passwd (file), passwd.OLD (file), passwd- (file), pcmcia, pkcs11, pkgtools, pm, polkit-1, ppp, profile (file), profile.d, protocols (file), pulse, rc.d, rc_keymaps, rc_maps.cfg (file), redis.conf (file), request-key.conf (file), request-key.d, reolv.conf (file), rpc (file), salt, securetty (file), security, services (file), shadow (file), shadow- (file), shells (file), skel, speech-dispactcher, ssl, sudoers (file), sudoers.d, sysctl.conf (file), sysctl.d, systemd, tmpfiles.d, tor, totem, udev, udisks2, updatedb.conf (file), UPower, vdpau_wrapper.cfg (file), wgetrc (file), wpa_supplicant, X11, xdg, xinetd.d, xml, and zsh.
How do I learn what can be deleted here and how do I move things without breaking anything in /etc/? Is there a program that highlights what's important, what can be moved, etc.?
For my /opt/ I have:
android-sdk, dropbox, and tor-browser-en.
This doesn't bother me, but I can see that somewhere in the future where it can get cluttered.
I also have created a folder on my root called ptmp and am using it to store my packertmp-0 files since my tmp folder gave me an error. I want to do things right and not get that cluttered too. So if you know about this check the thread out here
As a new Arch Linux user, coming from Windows 8, everything is great except a few minor annoyances. I give it an 7.8/10 for bring stable.
I will open up new threads for the following, but here are the few minor annoyances I still have:
If I edit what show up on my main menu (with main menu, not menu editor [from gnome]), somehow things get re-highlighted as if I clicked restore to defaults-- so I can't edit what I don't want to show up in my main menu anymore.
I forgot what file I edited that I made Chromium run at startup and now it slows things down by running at startup.
I couldn't exchange nautilus for dolphin (I like dophin better), and couldn't get xmonad going although I got the dependancies installed (Haskell, etc.). It throws me this error:
Please check the file for errors.
/home/jayvan/.xmonad/xmonad-x86_64-linux: executeFile: does not exist (No such file or directory)
xmonad:
xmessage: executeFile: does not exist (No such file or directory)
X Error of failed request: BadAccess (attempt to access private resource denied)
Major opcode of failed request: 2 (X_ChangeWindowAttributes)
Serial number of failed request: 7
Current serial number in output stream: 8
I can't remove the Universal access applet. I don't need it. This should be removable.
There is no longer a high performance, low performance, balanced option for battery consumption. This should make a comeback.
I somehow edited my information of my user and it's not editable through system settigns. It shows my company, phone number, etc. I manually entered a command that I forgot in the terminal that did this. I'm not sure. This should be easily editable in Gnome 3. I don't know why it isn't.
I've created a news user and don't know how to delete it.
I couldn't get mp3tag to work with packer because it didn't have a PKGFILE. Will be trying to manually make it some time later, but it should be fixed in the AUR.
I would like to uninstall the Epiphany Browser. Desktop Search, Power Statistics but don't know how. I know it's -Rns.
Sublime Text 2 doesn't show up as a desktop item in the applications folder, I have to go to the folder and click sublime_text to launch it.
When I change YouTube to anything higher than 240p, it doesn't play and I have to refresh it.
Grub-sustomizer should come installed with Gnome, especially for those that want to dual boot Android OS (x86) or anyhting else. In fact, in the installation guide there should be a warning that if you plan to install another OS like Android OS (x86) you should partition an extra 16 GB as ext3, or if you want to install another Linux distro to partition an extra 20GB as ext4.
There isn't any multitouch gestures pre-installed that I can configure. I'll see if they even exist.
I haven't check but I'm not sure if there is a good screen capturing app.
Last, so I can switch all my friends to Arch, they've already taken an interest an I plan to do a blog post about it once I feel confident, how can I customize this scrip to install the apps I already have installed?
I'll get to posting these in seperate threads right now.
Last edited by jjshinobi (2013-04-09 19:57:23)Ohhh man, you're making me nervous! Are you copying your files around your operating system yourself?
jjshinobi wrote:What are the common organizing tactics that you use?
The answer to your question is, I don't organize anything. Instead, pacman keeps track of all the files.
The only files you should need to worry about are what's in "/home". You can organize that however you want. If you have many ebooks, create a directory called "Books". Whatever.
Your story kind of reminds me of my roommate in college. As soon as he finished installing Windows XP, he would go through the entire directory structure and delete anything that was "unnecessary". It kind of scared me.
But fortunately, we don't have to do that with Arch Linux. Pacman takes care of everything, and it's super easy to create your own package. -
Office 2010 Student and Home Edition has been running without problems on my PC since 2012. Recently installed Microsoft Outlook 2013 (The version of Office 2010 did not include Outlook), since then, every time I open any of the original Office 2010 Programs
eg XCEL, WORD, POWER POINT, ONE NOTE, the program opens in 'Microsoft Office 2010 Single Image' which appears to have to be installed every time any of the programs are opened. The Installation process takes anything up to a few minutes to complete and sometimes
when filing or printing a document, the install restarts, on occasions, in an endless loop which requires random,imaginative keystroke action to terminate. The program shortcut icons all point to the 'Microsoft Office 2010 Single Image' application, I have
not succeeded in finding where the original programs are located as a quick way of trying to fix the problem.
The new installation of Outlook 2013 opens normally.
Evidently, the Outlook 2013 installation has disturbed the 2010 licensing or something ellse, can this unintended change be reversed?
Short of a complete Un-install + Re-Install, I have tried every straightforward repair/ change (run All on my computer)/ enter product code etc option, all to no avail.
I have read of variations on the same problem relating to mixing Office 2003/ 2007, cases of Outlook 2013 starting up in a similar way, but no examples of the specific problem outlined above. The next step
is a complete Un-install + re-install of Office 2010, is this the answer or do I need to go further? Indeed, is there a quick fix?Hi,
The Microsoft Office Single Image 2010 is a set of tools, documentation, and product files that licensed original equipment manufacturers (OEMs) can use to preload Office on new computers for distribution to end users.
I would suggest you to try the methods listed in this KB article:
http://support.microsoft.com/kb/2528748/en-us Just run the Fix-It tool mentioned in the page, or follow the steps to fix it by yourself.
A similar issue is discussed here, you might have a look:
http://answers.microsoft.com/en-us/office/forum/office_2010-office_install/microsoft-office-single-imagewhat-is-it-exactly/8a3fe920-d2b2-436e-9283-e7c085905692
Thanks,
Ethan Hua CHN
TechNet Community Support -
Something happened in my area on June 2nd and my service has not been the same. I called and complained that week and was never contacted back.I can not use my phone in most areas of the building I work in and can not use it in my bedroom at home. I signed my 2 year contract for the first phone April was a year ago and the second phone November will be a year. My daughter has started school and I hate not being able to contact her and vise versa. I was told August 15th which is the end of my billing cycle that I could get out of my contract. This was told to me over the phone I have all the information , but my concern is how do I know this is true. I can't end it until my daughter comes home so we can do some sort of switch over. I paid for the 2 phones and now have to reinvest in more phones and I don't think that is fair either. I live in an area where we still have Alltel and it is being bought out by at&t. If I switch I don't know what my service will be like and sure don't want to sign another contract with out knowing if it will work either. If I wait and Verizon puts a ding on my credit what will I be able to do that won't cost me a fortune on prepaid cell phone purchases ?
Best coverage is really subjective based on your location. For example, Verizon is the best in my area, but 20 miles up the road, a local carrier is better.
There was a law recently passed that requires Verizon to unlock a phone when it's out of contract. I'm not sure whether that includes a contract that was terminated.
The ETF is signed on a per line/per phone basis. If you open another line, you're simply going to add to your headache. They typically don't budge on the ETF.
In a sense, you are blaming Verizon for the high cost of cellular devices. They offered insurance when you signed up, and apparently chose not to accept it. That makes you responsible for replacing your device, if you choose to.
Lastly, the FCC has already addressed the ETF issue. It used to be a base ETF no matter how far you were into your contract. Now, you can reduce your $350 ETF by $10 for each completed month. The FCC isn't going to consider another ETF complaint.
I agree, Verizon has really taken a step down when it comes to customer service. That said, I don't feel this is a customer service issue. You chose not to insure your device without doing the research on the actual cost of a device, first. -
I have a cinema sound receiver connected to Apple TV via optical cable. When I have dolby digital set to Auto it doesn't come through as dolby digital when watching movies on netflix and iTunes (home movies).
If I set Dolby Digital to ON it works as expected, but the sound stops working through normal TV speakers (via HDMI). This is the same for netflix and home movies.
I tried 16 bit setting, but it made no difference.
Any advice on how I can get this working - meaning Dolby Digital always on for when I turn my surround sound on and sound through speakers for normal operation?
Obviously I can change the setting when needed, its just a pain.
Thanks in advance.Hello everyone,
here is the friendly and signed driver installation method to enable Dolby Digital Plus in your Encore internal speakers only. This is not an official driver, there is no control panel for Dolby Digital Plus or various sound effects, but tested and has much better and richer surround sound quality as before with factory driver. I guess, this driver tweak can work with any Bay Trail tablet also.
How can you upgrade Encore sound drivers:
1. Download signed driver package and extract.
2. Open Device Manager.
3. Upgrade your Sound, Video and game controllers
- Intel SST Audio Device
- Realtek I2S Audio Codec
one by one with "Have a disk" method.
4. Double click enabledolby.reg file and add to your registry.
5. Restart, and enjoy better sound quality.
Thanks.
UPDATE: Official Toshiba Dolby Digital leaked, official driver attached: ToshibaDolby.zip
- Encore with WimBoot -
Attachments:
EncoreDolby.zip 310 KB
ToshibaDolby.zip 1310 KB -
RAID 5 array. 2 arrays (/) and (/home) - asks about this
Hello pals. On wiki, we'have that it's necessary create the array with mdadm, after assemble, and after installs arch like anyother disk system, just add while in chroot "mdadm_udev" and run "mkinitcpio -p linux"
My question, however, is:
In a first try, I don't know if I did the mistake, but my /home partition were mounted, with, the root partition. So "not enough space".
I've reinstalled all again, Everithing working since, but yesterday, arch halts and, after reboot, I "lost" my /home, and not "md0" and "md1" devices, but "md126" and "md127" ones are founded on my arrays, and, no more linux.
fsck didn't work (not found the uuid XXXX partition"
I'm using a RAID5 scheme with "md0" as /root and "md1" as /home. md0 with 3 hard disks and md1 with three too.
RAID is a LSICorp with 21320R 6 bay. HD SCSI
partition type were XFS to "root" and "ext4" to /home.
Begginer's guide to install, and
https://wiki.archlinux.org/index.php/RAID
to create RAIDOk... everything reinstaled.
sdc
└─sdc1 linux_raid_member archiso:0 5a556144-7cad-36e1-b969-300e33e42055
└─md0 xfs root 3cd56eab-5747-4468-92e0-d53baf0d5544 /
sdd
└─sdd1 linux_raid_member archiso:0 5a556144-7cad-36e1-b969-300e33e42055
└─md0 xfs root 3cd56eab-5747-4468-92e0-d53baf0d5544 /
sde
└─sde1 linux_raid_member archiso:0 5a556144-7cad-36e1-b969-300e33e42055
└─md0 xfs root 3cd56eab-5747-4468-92e0-d53baf0d5544 /
sdf
└─sdf1 linux_raid_member archiso:1 d27f91fb-ed92-12a7-340c-11b8636d491f
└─md1 ext4 home 6cb919d4-9016-4a7b-8336-01a1244a0630 /home
sdg
└─sdg1 linux_raid_member archiso:1 d27f91fb-ed92-12a7-340c-11b8636d491f
└─md1 ext4 home 6cb919d4-9016-4a7b-8336-01a1244a0630 /home
sdh
└─sdh1 linux_raid_member archiso:1 d27f91fb-ed92-12a7-340c-11b8636d491f
└─md1 ext4 home 6cb919d4-9016-4a7b-8336-01a1244a0630 /home
cat /proc/mdstat
cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md1 : active raid5 sdh1[3] sdg1[1] sdf1[0]
142884864 blocks super 1.2 level 5, 64k chunk, algorithm 2 [3/3] [UUU]
md0 : active raid5 sde1[3] sdc1[0] sdd1[1]
70778880 blocks super 1.2 level 5, 64k chunk, algorithm 2 [3/3] [UUU]
/etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/md0 LABEL=root
UUID=3cd56eab-5747-4468-92e0-d53baf0d5544 / xfs rw,relatime,attr2,inode64,logbsize=64k,sunit=128,swidth=256,noquota 0 1
# /dev/md1 LABEL=home
UUID=6cb919d4-9016-4a7b-8336-01a1244a0630 /home ext4 rw,relatime,stripe=192,data=ordered 0 2
Anything to change?
I remember that the ~last problem~ were during a upgrade. -
If I purchase PS for the $9.99 per month plan, will I be able to install / use on more than 1 computer? (i.e. office and home)
Yes, the subscription license allows for working installations on two machines.
-
Comcast took over my firefox browser and home page, how do I get comcast out of my firefox
I moved to a new area and comcast installed the service here. The installation and set up of the modem asked me to install a toolbar and I opted out because I see no use in comcast services. Comcast installed some thing like malware that took over safari chrome and firefox where all of the home pages were converted to their site. Safari required being reset and chrome I removed and reinstalled. Firefox has been completely taken over, I have uninstalled it 3 times and tried safe mode and just about everything else. I spent 2 hours on the phone with comcast to no avail and my feeling on it is that firefox is the most popular browser and comcast wants part of that so they have developed their own little malware to get in on firefox. What can I do as customer or user of firefox to get rid of comcast and their browser and home page and get back to what I am comfortable with which is firefox and my npr home page.
Sorry, if resetting your homepage in Firefox doesn't work or that change is only temporary until the next time you use your PC or restart it, you need to uninstall that Comcast Toolbar from your PC. I don't know how or where that Comcast Toolbar for Firefox is installed, so you'll need to figure that out yourself.
The first place to look is the Windows Control Panel > Add / Remove Programs, and it is there '''Remove''' it.
Second place is in the Firefox Add-ons Manager tab - '''{ Ctrl + Shft + A }''' - if you find it there, '''Uninstall''' it from Firefox.
If you are able to get rid of that Comcast Toolbar and still have problems with not being able to set your choice for a homepage, let us know. There are a couple of places that may have been messed with by that application, like a user.js file or the prefs.js file.
I'm a Comcast user, too, although I have had this cable service for over 10 years now, with the two previous owners of the franchise for this area before Comcast bought out AT&T Cable. All three companies recommended that I have their "software" installed and I refused it each time. I told them if it was "required", they could close my account, that I would go elsewhere.
Maybe you are looking for
-
I submitted my question but ran out of room in the box. I can still down load new Apps to my iPod touch AND update them but CAN NOT update the older Apps. that was on the iPod before the problem. I have been to Three Apple Service Center stores - In
-
Replacing html tags in a htmldocument
Hi Java Gurus I have a htmldocument which has the bacjground set to black and foreground to white. When i print the document i see the text in white color ( rather invisible). I thought the foreground color of the document needs to be changed. How ca
-
Problem in Netweaver ABAP full trial version
Dear Freinds i have installed SAP Netweaver ABAP Full Trial version. But There is problem when i create any program SE38. That program is created and activated but could not be executed. When i press F8 no response comes. can any body give the solut
-
Error in Displaying ALBPM Dashboards in ALUI 6.5
Hi, We have integrated ALBPM 6.03 with ALUI 6.5, wherein we have to show the custom dashboards in ALUI portlets provided by ALBPM. But this dashboards are not getting displayed. Also the dashboard uses fusion charts which requires flash. Are there an
-
Video capture with Sat Pro M70: What ports and leads can I use?
I want to edit my home movies on my Sat Pro M70 using WXP Pro (win dvd or movie maker). I want to capture the video from my panasonic camcorder which has digital tapes. what ports can I use and what leads do I need? I am desperate to edit my recent w