SCOM 2012 upgrade to R2 - Move SRS to new server

I am currently working on an upgrade to our SCOM 2012 R1 environment to SCOM 2012 R2. As part of this I would like to move our SRS database from running SQL 2008 Enterprise to SQL 2012 Standard to save some licensing costs. The initial installation
used Enterprise Edition when it is not needed for our configuration.
Most of the procedures I have found for this involve also moving the OperationsManagerDW database and they seem to assume that the Data Warehouse DB and SRS/SCOM Reporting Roles are on the same server. In my case i have 3 SQL instances:
1 - OperationsManager (SQL 2008 Enterprise)
2 - OperationsManagerDw (SQL 2008 Enterprise)
3- SRS Report Server (SQL 2008 Enterprise)
As part of the upgrade I am looking to perform an inplace upgrade from SQL 2008 Enterprise to SQL 2012 Enterprise for the OperationsManager and OperationsManagerDW database servers. For the SRS database I would like to move that to a SQL Standard 2012
Server. I was hoping that I could perform this by trying to do the following steps prior to upgrade to R2:
1 - Stand up new SQL 2008 Standard Edition SRS box
2 - Uninstall Operations Reporting Role from current SRS Report Server running SQL 2008 Enterprise
3 - Install Operation Reporting Server Role for SCOM onto new SQL 2008 Standard Server
4 - Start SCOM upgrade -
5 - Upgrade in place all SQL 2008 instances in place to SQL 2012 Enterprise (OperationsManager and OperationsManagerDW) and Standard (SRS)
6 - Perform standard application update steps for R2.
Has anyone performed this downgrade for the SQL edition for SCOM before? In looking at the instructions from Technet (http://technet.microsoft.com/en-us/library/hh457588.aspx)
to perform this it appears to me that they are moving both the SRS and DataWarehouse databases and not just the SRS server like i am trying to.
This would leave my SCOM 2012 environment running R2 with the following DB configuration:
1 - OperationsManager (SQL 2012 Enterprise)
2 - OperationsManagerDw (SQL 2012 Enterprise)
3- SRS Report Server (SQL 2012 Standard)
Any help is appreciated. This is being done to help save $ for enterprise SQL licenses.
..Jon
Jon Kaloz

Hi, your solution will work but you can simplify the process as following
1. Uninstall Operations Reporting Role from current SRS Report Server running SQL 2008 Enterprise and SQL server itself.
2. Start SCOM upgrade
3. Upgrade SQL 2008 Instances to 2012
4. Stand up new SQL 2012 Standard for SRS (most possibly on the server where old SQL 2008 Enterprise with SSRS was installed ) and install SCOM Reporting feature on it

Similar Messages

SCOM 2012 Upgrade

Can I upgrade a SCOM 2012 SP1 UR4 machine to SCOM 2012 R2 UR1?

Adding more info:
Upgrading SCOM 2012 SP1 to SCOM 2012 R2
http://blogs.technet.com/b/nepapfe/archive/2013/11/26/upgrading-scom-2012-sp1-to-scom-2012-r2.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Best way to move WFE to new server

We have one web front end server and one sql server. I want to simply move the existing web frotn end server to new hardware. What is the easiest way to do this? Also, the last admin did not patch the existing site to SP2. If I
install Sharepoint 2007 sp2 and attach it to databases that are on the original Sharepoint 2007 RTM version, will it upgrade the database schema or will this cause problems? We only have on site colelction with about 13 GB of data, its not a complicated
environment but there is a lot of data there. I want to do this as simply as possible, thanks.

The basic three steps that need to followed while moving to new hardware are.
Set up the new server farm
Make sure the versions of database are the same in this step.
Move the databases to the new server farm
Since you don't have many webapplications, in fact just one, you could do an stsadm backup of the web application and restore it on the new web app. And then Apply SP2 along with all the other cumulative updates.
You will have two farms running at the same time at this point providing redundancy.
Shut down the old server farm
That is probably the best approach I would prefer. You can always read the following technet article..
http://technet.microsoft.com/en-us/library/cc512725(office.12).aspx
Hope this helps.
Thanks
V
V

Upgrade from GW8 to 2014 on new server

Hi all
We are looking to upgrade/move our current GW 8 (SLES10SP3 in a vm enviroment) to GW2014 (SLES 11 NEW vms). I've read alot about the in-place upgrade (thanks Danita!) but not so much on moving and upgrading. Just looking on some feedback on what the best steps would be for our situation? Thanks in advance!

Hi squartec,
I did this upgrade a couple of months ago and had some issues. Here are some links to forum discussions I had.
https://forums.novell.com/showthread...-case-question
https://forums.novell.com/showthread...-after-upgrade
A few things I can offer:
1. Purchase The Caledonia Upgrade Guide for Groupwise 2014 - definitely worthwhile.
2. If you are running your Groupwise system on OES with NSS now, I would plan on migrating to a box running only SLES and using dbcopy with the -m switch just to make sure the case of your data is good to go just to simplify the environment.
3. If you use ext3 for your native linux filesystem pay attention to noatime and review of this: https://www.novell.com/support/kb/doc.php?id=7010924
4. Make sure your post office / domain connections are ip only
5. Make sure the monitor screens for all domains and post offices look completely healthy (no down or unknown connections). They should all be using SSL as well. I had an issue with the SSL configuration for my post office monitor that prevented me from accessing the monitor screen of the post office after the upgrade.
5. Configure LDAP to edirectory in Groupwise before you start the upgrade.
6. Although I still had an issue with this, make sure you change the domain and post office paths in console one just before you take them down for the final migration to the new server.
There are some other things that are outlined nicely in the Caledonia guide but those are some things to think about.
Dan

Move appset to new server and new version

Hi
I am currently on 5.1, SQL 2005 and Windows 2003, where we have some performance issues. To see the effekt of an upgrade I would like to move my current appset to a new server with BPC 7.5 SQL 2008 and Windows 2008.
How should I do this?
Can I make a clean installaion of BPC 7.5 on SQL 2008 and then restore the 5.1 version appset into 7.5.
What is the recommended way to do this.

Hi,
There is nothing to worry.
You need to take the backup from the 5.1 system and restore it in 7.5 MS. After the restoration, please make sure that all the components are working fine or not. You might have to look at the security once again and the reports and the input schedules. There might be small small alterations / modifications required. However, there wont be any big development. There is only one area which needs little more concentration - SSIS packages. You might have to re-build the SSIS packages in SQL 2008. Another thing is that if you have any macros or VB in your templates, you might have to revisit them.
As a whole, I dont see much challenge in this whole process.
Hope this helps.

Move libary to new server

We are upgrading H/W at the moment. I want to move my GW server to a
new GW server - both NW 65.
The new server will not have the same name as the old server. How is
this going to affect my libraries when I copy the GW database and
storage areas to the new server ?

Steve,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Break cluster and move databases to new server

Hello everyone. I have a question that may be basic but I am by no means a SQL person. Right now we have a SQL 2005 cluster running on VM ESXi with a celerra backend storage. Some drives are mapped Raw. We recently put in a new
VNX and we are not able to migrate the SQL server over due to how the drives are mapped. I am thinking that I want to build a new SQL server and move the databases. The new build will not be a cluster since we have point in time recovery manager
from EMC. Now my thinking is, can I break the cluster, move the 2nd node to the new ESXi and storage and present new storage or would it be best to just build a new server? Is it easy enough to change an instance name after SQL is running?
Several applications refer to the SQL Cluster and they are critical so I need something with least amount of downtime. Would doing backup of all of SQL and then a restore to the new system be best? Any thoughts or direction? Thanks
Joe M

The most straightforward and reliable method is to build a new server, migrate the databases using backup/restore, test the new server, and cut-over by shutting down the old servers and either reconfiguring the client applications or renaming the new server
to have the same network name as the old server's SQL Cluster Client Access point.
You can also use DNS redirection instead of renaming the new server, although using a DNS hostname alias for your server requires some additional security configuration. EG
http://blogs.msdn.com/b/dbrowne/archive/2012/05/21/how-to-add-a-hostname-alias-for-a-sql-server-instance.aspx
David
David
David http://blogs.msdn.com/b/dbrowne/

Move database to new server from ASM to FS

Hey, I have to move my database from ASM to filesystem storge (10.2.0.3 on sles 10 sp1)
The new server is also sles 10 sp1.
Can I just do an full export on the source site, and an import on the target site ? Will that work ?
Any other steps to perform ?
Chris

Hi,
1. Export db wlth FULL=Y . and then we have to create new database at target location and then import operation have to done.
2.we can take rman backup, restore rman backup in target location. This method will reduce the complexity
take backup through Rman.
Target location:-
1. export ORACLE_SID=xxx
2. rman target /
3. startup nomount
4.RMAN> RESTORE CONTROLFILE FROM 'backup piece';
5.RMAN> alter database mount;
6.
set newname for datafile '+DG/datafile.dbf' to 'FS/location';(do for all datafiles)
restore database;
switch datafile all;}
7. alter database rename file '+DG/datafile.dbf' to 'FS/location';(do for all datafiles)
8.alter database open;
follow these steps from ASM TO FS.
Edited by: startup on May 23, 2013 7:41 PM

Move DB to new server - Oracle Linux 4 old, Oracle Linux 5 on New

We are planning on moving our Datawarehouse db to a new server.
The old server has Oracle Enterprise Linux 4 and our server admin, using her infinite wisdom and after we agreed to keep the O/S the same - installed Oracle Linux 5.
I was planning on installing the oracle_home, etc. all with the exact same names, the mount points would be the same so in theory, just start the db on the new server.
Now that its a different version of the O/S - will it work?
Has anyone tried this before?
I will be trying with a small test DB but don't want to run into any gotchas when I try to "move" the 2.5t datawarehouse db.
Thanks.

Its certified, db version 10.2.0.4 but just about everything I've read via google etc. says if the db thinks the O/S is different, you have to use either exp/imp, datapump or tablespace move from one db to the other (really a copy and we don't have the disk space).
Thanks.

Move attachments to New server

Dear experts,
We have a customer who has moved SAP Business One to a new Server. They have attachments on their old server that are linked to documents. The old server is going to be completely removed. How can they move the attachments to the new server and still have the links from the documents in SAP?
thanks,
Costas

Hi
Need to raise ticket with SAP to solve the issue..
Attachments folder changed
Symptom
The attachments folder is changed in SBO, and all the files in the
old attachment folder are moved to the new place. The existing
attachments in SBO(in Activities, Alert, Service Contract etc. ) still
have the old path, and it is requested to update them to the new one.
Cause
Specific Solution
Solution
If you have got such a issue, log a support message via SAP Service Marketplace referring to this note including all relevant information.
***Please Note: The solution for this case only cover native/system SAP Business One field. Any User Defined field (UDF) create as link, as customization, is not part of this solution as its data maintenance is customer/partner responsibility.***
Regards
Kennedy

Move gridcontrol to new server

hey,
i have a new server and has the same path names en os are the same.
i have to move my gridcontrol to the new server what are the step to do ore is there a simple movement because the os and path name are the same.
Message was edited by:
sham

I would do the following:
- reinstall grid control on the new host
- backup repository database from old host
- stop grid control on the new host
- restore repository database to new host
- start grid control on new host
I don´t think that there is a supported way of moving the OMS to a new host. However if the new host has the same hostname and the same ip, same os patchlevel, etc. it could work. But as soon as the hostname is different, manually moving and replacing all the references to the old hostname is not recommended.
Regards,
Martin

Use unused server as share point server after move databases to new server

HI,
we have a single server share point farm (ServerApp01) for Intranet and it connects to a SQL SERVER 2008 R2 database server (Server02),
and now we moved all sharepoint databases and content dbs to new sql server in different server (ServerSQLNew).
using sqlalias we point to new SQLSERVER 2012 Instance in this new server.
- now the old sql server (Server02), is not in the sharepoint farm
- now can i add this server in intranet farm and use this old server (Server02) as wfe server ?
here my doubt is when i open cliconfg.exe i saw that sharepoint server pointing to this old server name (Server02),
after i will join this server to existing farm is any issues?
adil

hi
i already turned off sql server instance in old sql server in my case in Server02.
In share
point Server (ServerApp01) i opened cliconfg.exe and add sqlaliases to point to new sql server.
If i rename server02 server or rebuild
the server with a clean OS install still Sharepoint Farm works right?
below is the scenario of sqlalias in sharepointserver (serverapp01)
adil

Move database to new server

I hava Oracle 10.2.0.1.0 on Solaris 10.5 and wants to move it to Oracle 11.1.0.1.7 on same platform, but different server using exp/imp.
I am not aware of any other precondiction I need to meet before carrying on this exp/emp. If there is a precondition, I will appreciate if you can share it.
Does the database needs to shut down
Do I need to copy any files from old database
Here is my par file:
userid = system/****
file = /h/share/database/db/backups/CBEXP.dmp
log = /h/share/database/db/backups/CBEXP.log
statistics = none
full = y

You can do exp/imp if you have the same schema infrastructure and db objects at the target db. Otherwise you have to clone the database to the new target.
1. Create a new DB with DBCA at the target server
2. Shutdown the source and target databases
3. Do a cold backup (which means copying all datafiles to the target directory)
4. Startup the source db
5. Create a backup control file on the target db such as follows;
CREATE CONTROLFILE SET DATABASE "<SID_of_clone_database>" RESETLOGS
NOARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
MAXLOGFILES 5
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 1
MAXLOGHISTORY 4991
LOGFILE
GROUP 1 'D:\Oracle\Oradata\NUNDQOL\REDO01.LOG' SIZE 100M,
GROUP 2 'D:\Oracle\Oradata\NUNDQOL\REDO02.LOG' SIZE 100M,
GROUP 3 'D:\Oracle\Oradata\NUNDQOL\REDO03.LOG' SIZE 100M
-- STANDBY LOGFILE
DATAFILE
'E:\oracle\oradata\NUNDQOL\SYSTEM01.DBF',
'E:\oracle\oradata\NUNDQOL\UNDOTBS01.DBF',
'E:\ORACLE\ORADATA\NUNDQOL\CWMLITE01.DBF',
'E:\oracle\oradata\NUNDQOL\DRSYS01.DBF',
'E:\ORACLE\ORADATA\NUNDQOL\ODM01.DBF',
'E:\oracle\oradata\NUNDQOL\NUNTQOL.DBF',
'E:\oracle\oradata\NUNDQOL\NUNTQOL_IAM.DBF',
'E:\oracle\oradata\NUNDQOL\INDX01.DBF',
'E:\oracle\oradata\NUNDQOL\TOOLS01.DBF',
'E:\oracle\oradata\NUNDQOL\USERS01.DBF',
'E:\oracle\oradata\NUNDQOL\XDB01.DBF';
6. STARTUP NOMOUNT of the target database
7. execute the backup control file
8. RECOVER DATABASE UNTIL CANCEL USING BACKUP CONTROLFILE;
ALTER DATABASE OPEN RESETLOGS;

Move ZDM to new server

I am planning a migration NW 6.5 -> OES Linux by way of transfer ID and trying to figure out what to do with Zenworks. I have ZCM set up in testing and desperately hope that 10.2.2 will fix problems like slow login, but need to be prepared to keep ZDM 6.5 going if I have to. If I install ZDM on a new NW 6.5 server with a new name and IP, do I need to make this a replica server? I know I'll need to have zwsimport on the clients point to the new server. What would I need to do to make applications remain available? All paths to applications will remain the same after the oes migration. Any other gotchas I should be aware of? Thanks.

zenking,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Move site to new server

I've just moved a client's site to a new server. I'm sure I
copied all the files over including the notes folders etc.
After updating his ftp login info in Contribute, my client
reports he can connect tothe site OK, but that Contribute is
telling him that file(s) are not found.
I am unsure how to resolve this issue. Are there particular
files, like hidden files, that may not have gotten copied to the
new server?
If I cannot resolve this, would it be advisable to delete
that site conneciton in Contribute and set up a new site. If so, do
I need to go through the site and cancel the files Contribute
stores on the server, and if so, which ones?
He's using Contribute 3 on an XP box, he is set up as admin I
think. I do not administer the site with Contribute, I use
Dreamweaver.MX 2004.
Also, if its relevant the existing html site files were
modified in Dreamweaver during the transfer to the new server (just
link changes and such).
Thanks in advance for your help.
Flip

Some things that helped us.
If your client is the admin then the chances of them od
adjusting the administration settings in Contribute is slim so....
In an ftp program ( not dreamwearver as it hides it) delete
the _notes folder off the server.
Then get your client in the edit menu of Contribute go to "my
connections" pick the one that is accociated with the site and
delete it.
Then make a new connection in Contribute and set the site up
again. ie name ftp details etc...
this is the quickest and easiest way to get them up and
running again.
If they still have trouble connecting to the pages sometime
the options in the "Advanced" button next the the ftp settings can
help.

SCOM 2012 upgrade to R2 - Move SRS to new server

Similar Messages

Maybe you are looking for