Visual Studio Ultimate is required to execute test.
I'm trying to run a Load Test using VS2013 Ultimate but VS keeps telling me I'm not :) Snip is attached. I try to run a fairly simple Load Test, GET call against a single web page. Using Constant Load, 5 users, 20 iterations. The individual
Web Test runs fine. I'm running from my dev box so Admin, Controller and Agent all on same machine. Machine is Windows Server 2012 R2
Exact error is "Visual Studio Ultimate is required to execute test."
I'm signed in, my profile looks right and my subscriptions are good. What am I missing? Whats going on here?
Hi rlakin,
Thanks for your posting in the MSDN forum.
As you said that the Test Controller and Agent are in the same machine, I think you run your load test with them, am I right? If so, how about run your test locally wihtout using the Test Controller and Test Agent. For example, just disable the
.testsettings file, run it again.
If it still has this issue, how about running it in other VS machine? If the same test works well in other VS, I doubt that it is your VS IDE issue.
In addition, Where did you get this VS2013 version? Maybe you could re-download it from the official site, test it again.
http://www.visualstudio.com/downloads/download-visual-studio-vs
If possible, please also install the VS2013 update 4.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
Troubles with Visual Studio Ultimate 2013
Help, please, to resolve issue with Visual Studio Ultimate 2013:
VS 2013 Ultimate update 2
System.Exception
Пакет не прошел проверку обновлений, зависимостей или конфликтов.
Windows не удается установить пакет App.a5e822f7e.a1268.a4a33.aa189.adc2811990181, так как он зависит от другого пакета, который не удалось найти. Для установки пакета требуется как минимум версия 0.0.0.0 платформы Microsoft.VCLibs.120.00.Debug,
опубликованной any publisher. Предоставьте платформу вместе с пакетом.
at Microsoft.Expression.HostUtility.Platform.AppContainerProcessDomainFactory.CreateDesignerProcess(String applicationPath, String clientPort, Uri hostUri, IDictionary environmentVariables, Int32& processId, Object&
processData)
at Microsoft.Expression.DesignHost.Isolation.Primitives.ProcessDomainFactory.ProcessIsolationDomain..ctor(ProcessDomainFactory factory, IIsolationBoundary boundary, AppDomainSetup appDomainInfo, FrameworkName targetFramework,
String identifier, String baseDirectory)
at Microsoft.Expression.DesignHost.Isolation.Primitives.ProcessDomainFactory.CreateIsolationDomain(IIsolationBoundary boundary)
at Microsoft.Expression.HostUtility.Platform.AppContainerProcessDomainFactory.CreateIsolationDomain(IIsolationBoundary boundary)
at Microsoft.Expression.DesignHost.Isolation.Primitives.IsolationBoundary.Initialize()
at Microsoft.Expression.DesignHost.Isolation.Primitives.IsolationBoundary.CreateInstance[T](Type type)
at Microsoft.Expression.DesignHost.Isolation.IsolatedObjectFactory.Initialize()
at Microsoft.VisualStudio.ExpressionHost.Services.VSIsolationService.CreateObjectFactory(IIsolationTarget isolationTarget, IObjectCatalog catalog)
at Microsoft.Expression.DesignHost.Isolation.IsolationService.CreateLease(IIsolationTarget isolationTarget)
at Microsoft.Expression.DesignHost.Isolation.IsolationService.CreateLease(IIsolationTarget isolationTarget)
at Microsoft.Expression.DesignHost.IsolatedDesignerService.CreateLease(IIsolationTarget isolationTarget, CancellationToken cancelToken, DesignerServiceEntry& entry)
at Microsoft.Expression.DesignHost.IsolatedDesignerService.IsolatedDesignerView.CreateDesignerViewInfo(CancellationToken cancelToken)
at Microsoft.Expression.DesignHost.Isolation.IsolatedTaskScheduler.InvokeWithCulture[T](CultureInfo culture, Func`2 func, CancellationToken cancelToken)
at Microsoft.Expression.DesignHost.Isolation.IsolatedTaskScheduler.<>c__DisplayClassa`1.<StartTask>b__6()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
Thanks You!Hi Jaer,
>>System.Exception
Пакет не прошел проверку обновлений, зависимостей или конфликтов.
Windows не удается установить пакет App.a5e822f7e.a1268.a4a33.aa189.adc2811990181, так как он зависит от другого пакета, который не удалось найти. Для установки пакета требуется как минимум версия 0.0.0.0 платформы Microsoft.VCLibs.120.00.Debug,
опубликованной any publisher. Предоставьте платформу вместе с пакетом.
Since this forum is support the English language, so I suggest you can provide me the Exception message by the English.
In addition, I suggest you can provide me more detail message about your issue as the pvdg42's suggestion.
For example:
How did you get the system exception?
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
hi.......i have visual studio ultimate 2013 update 4......i want to create webapplication project but in my visual studio templates ,i cant see web option......or webapplication option..even i reset settings to webdevelopement.......so what should i do
now.....plz tell me very fastThanks for Bill's help.
Hi vinayakkadam143,
Like Bill's suggestion, firstly we have to make sure that we find the correct project template options.
But if you still get this issue, one possible reason is that the project templates don't load correctly.
Run the command line:
devenv.exe /InstallVSTemplates
Reference:
https://msdn.microsoft.com/en-us/library/ms241279.aspx
Or repair your VS, test it again.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Auditing Help: Visual Studio Ultimate XAML Designer UI 2013/2012
While performing a licensing audit on computers in our domain many computers have come up as having "Visual Studio Ultimate XAML Designer UI 2013" and "Visual Studio Ultimate XAML Designer UI 2012" installed. Does this require ultimate
MSDN license to use? If not what level of licensing does it require? so we can issue the correct level of licensing. Laslty can this be uninstalled separately from visual
ThanksHi msdnskills,
As far as I know that the Visual Studio Ultimate XAML Designer UI 2013 is a component of Visual Studio Ultimate 2013.
About the Visual Studio Ultimate XAML Designer UI 2013 license issue, I suggest you can call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist, and you can get more detail information
from there. You can also visit the following site for more information and support on licensing issues:
http://www.microsoft.com/licensing/mplahome.mspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to install AE SDK in visual studio ultimate 2010
Hi,
I want to make plugins from visual studio ultimate 2010 and i don't know how to integrate my visual studio with AE SDK it's like they are just files no package of setup so i can click and install but i guess i have to configure the sdk,i am working with android sdk in eclipse but don't know how to use this one.
BTW i am a new programmer and learning this cool new language and also doing job with after effects and 3ds max for past 5 years.
Help would be greatly appreciated.
ThanksHi,
Thanks for your great reply i greatly appreciate you efforts.
Arie the thing is that i saw the post you mentioned above and it's kind of tangled,isn't there anyway or any sourceful website for step by step guide because i already mentioned that i am a brand new c/c++ programmer and i have no experience how to do programming in c/c++ as i am android and java developer using eclipse tool so visual studio is somewhat a new world for me.
Please if you have any step by step guidence link or website in your mind,do let me know i anxiously look forward for a step by step guide,but let's say if you don't have anything i want it's perfectly fine i ll try to dig more and work and look in VS 2010 because may be i am new and that's why i can't find the SDK integration.
Once again Arie thanks for your helpful and fast reply i greatly appreciate your co-operation.
Thanks,
Brian -
I am getting the infamous "Could not load file or assembly Microsoft.SqlServer.management.sdk.sfc version 11.0.0.0." The set up of my system is Visual Studio 2013 Ultimate update 4 and my SQL server is 12.0.2000 Express. I am also using SQL
management studio 2014. I read other comments and blogs, and reinstalled the SQL Express 12.0.2000, but no luck yet.Hi payam49er,
>>I am
getting the infamous "Could not load file or assembly Microsoft.SqlServer.management.sdk.
sfc version 11.0.0.0."
Based on your error, could you please tell me what you do operation and then you get the error message?
Could you please tell me if you add a data connection from Server Explorer Window in Visual studio 2013 Ultimate update
4 and then you get the error message?
If yes, to check if the issue is related to the VS IDE issue, I suggest you can execute the following commands to check if it can
help you add data connection in VS2013 Ultimate Update 4.
(1)I suggest you can run your VS in safe mode by executing Devenv.exe /SafeMode to add a data connect again.
(2)I suggest you can use the Devenv.exe /ResetSettings to restores the IDE's default settings, optionally resets to the specified
VSSettings file.
(3)You can execute the Devenv.exe /ResetAddin to remove commands and command UI associated with the specified Add-in.
In addition, if you used the SQL Server Express to connect the data in VS, you need to specify the server name
as MyComputerName\SQLEXPRESS. If you used the SQL Server to connect the data in VS. Please you try to specify the server name as MyComputerName\InstanceName here to check the result.
If still no help, according the error, it indicates that the problem is that the system cannot locate the right assembly (SQL
Server SDK). So I think you may get better response and solutions if you consult on SQL Server forums.
Thank you for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Here is what I am using:
MacBook Pro - Version 10.7.5 with 128 GB SSD
Parallels 6.0
Windows 7 Home Premium
Visual Studio 2013 Ultimate
IIS Express 7.5 download that changed it to IIS Express 8.0
I also have WebMatrix but I am not planning on using it.
I am a novice when it comes to development and these technologies so I am sure that has some impact on my issues.
I have spent a lot of time looking between the various forums to find a solution and they all seem to offer parts but not an entire and workable solution to solve the two errors that I receive when starting a new project and/or web site:
1-
Configuring IIS Express Failed with the following error:
Filename: redirection.config
Error: Cannot read configuration file
2-
Unspecified Error Exception from HRESULT: 0x80004005 (E_FAIL))
Based on the research I believe it has something to do where the IIS Express files are located on the Mac side of the computer. I have tried to map them back to the Windows machine but I still get the same errors.
I understand it should be looking in the documents folder on the C Driver for the user, which is Administrator. I have tried to redirect, open the port, change the Firewall settings to no avail. I believe it is something very simple
but I am not seeing it. I did turn on the Windows Features for IIS and removed the read only check box for the IIS Folder.
I have looked at the binding and port settings but cannot figure out how to make changes there. I think I need to remove local host and replace it with my computer name. I did try this but it didn't work. Here are the defaults:
Please let me know what you think and share a possible solution. Remember that I am a novice and some things will go over my head so the more detail the better.
I am happy to not use IIS Express and just use IIS because the volume of development is low. I am also open to using VS directly onto Azure and bypassing IIS if that is the best solution. I say this because I saw some posts that state there isn't
a workaround.
Thanks for taking the time to assist.Hello jats1910,
Your problem may more related to IIS setting and configuration. But this forum is about Visual Studio Setup and Installation. If your Visual Studio installed without problem on your OS, then you may need to consult this issue on IIS forum.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Windows store app template problems in visual studio ultimate 2013 update 4 version
I couldn't find any template of windows store app under visual c# in my visual studio 2013 ultimate update 4 version...How can i install this template or which version of visual studio should i use...meanwhile i am using windows 7 ultimate 64 bit.......is
os is an issue.....kindly help meHi,
You can't develop Windows Store app with Windows 7. So when you installed VS 2013 on a Win7, the templates are not present. Only the template compatible with Win7 are installed.
Regards,
Yan Grenier
Merci de bien vouloir "Marquer comme réponse", les réponses qui ont répondues à votre question, et de noter les réponses que vous avez trouvé utiles. -
Can't update Visual Studio Ultimate 2013 trial from 30 days to 90 days?
Hi,
I can't update the 30 day trial for Visual Studio 2013 Ultimate.
I have followed the instructions to register the product.
But although the message says "license downloaded successfully", the license stays at 30 days.
Any help would be appreciated?
ThanksHello jungleburger,
Have you installed any version of Visual Studio before?
For this license issue, please
call 1-800-426-9400,
Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific
Time) to speak directly to a Microsoft licensing specialist, and you can get
more detail information from there. You can also visit the following site for
more information and support on licensing issues:
http://www.microsoft.com/licensing/mplahome.mspx.
Actually I think normal steps
http://msdn.microsoft.com/en-us/library/gg442061.aspx would update the license. But if you failed, this may also related to the server.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I just started learning ASP.NET through a book, and it asks to connect to "your" SQL server and explore a .mdf file. I've been trying to install SQL, but I only just now got a working installation, and even then it won't let me install the Management
Software. Whenever I try to connect, I get this error: http://puu.sh/7F2JY.png
This is exactly what I do to connect:
1) Open project
2) Navigate to the Server Explorer
3) Click on connect to database
4) In this menu, I can see me Machine name on the top part, which I think means that it's picking up my server runningh
5) On the bottom, it wants me to enter a database name. I think this may be my problem, as I have no idea what to do here.
Also, when I double click on the database file, I get this errpr (52): http://puu.sh/7F2Yw.png
I really don't know what to do here, so post any tips down belowHi,
Did you choose the correct Server name? It should be the machine name where you installed SQL Server on.
Is it empty when you open select or enter database name drop box in the Add connect dialog box in the Visual Studio 2013?
“Update: I re-installed, and then used both installers. Now I have the Server Management tools, but I still cannot connect.”
The screenshots indicates that the SQL Server is not accessible.
Do you mean that you are not able to connect SQL Server by using SQL Server Management Studio?
If so, make sure that SQL Server Services is started.
Please check out the following articles for details:
How to: Start an Instance of SQL Server (SQL Server Configuration Manager)
http://technet.microsoft.com/en-us/library/ms190699(v=sql.105).aspx
Connect to Any SQL Server Component from SQL Server Management Studio
http://technet.microsoft.com/en-us/library/ms173871.aspx
Thanks.
Tracy Cai
TechNet Community Support -
Is there an Uninstall Package for Visual Studio Ultimate 2015 CTP?
Having some serious issues using VS 2015 Ultimate CTP and need to revert back to VS 2013 Community Edition. Can someone please point me in the direction of an uninstall package for VS 2015 Ultimate CTP, if there even is one? In a very tight time crunch right
now and don't have time to go through the whole computer and find all files associated with 2015. I've already used Control Panel > Programs to Uninstall, however, it appears that there are still some 2015 files lingering...
Thank you!Different versions of VS install as complete separate programs. Your issues with uninstalling the VS 2015 CTP should not interfere with installing VS 2013 CE.
Have you tried simply installing VS 2013 CE? It should work and give you what you want. -
Hello,
I am trying to install Visual Studio Community 2013 in my machine but when I start the setup process I get the followingerror message:
Setup Blocked
Visual Studio Ultimate 2013 is currently installed on this machine. Please uninstall Visual Studio Ultimate 2013 and retry.
The problem is that I used to have VS Ultimate 2013 (Preview Edition, I think) installed on my machine but I've uninstalled it some time ago. It looks like something was left over in process.
What I've tried to do was to install VS Ultimate 2013 again, perform a repair operation and then uninstall it again. This uninstall process is reported to be successful. However, it did not solve my problem: VS Community 2013 installation still fails.
Does anyone have an idea how to solve this?
Thank you,
João Pedro"I used to have VS Ultimate 2013 (Preview Edition, I think) installed "
Sorry to be the bearer of bad news, but this sort of situation is exactly why potential users of pre-release software are warned NOT to install test software on production systems. While a new software version is in development, one of the LAST things to
be finalized is the uninstaller. So, uninstalling a test edition often leaves behind unwanted artifacts.
In your situation, I'd do a clean install of my OS, then install VS. -
What Versions of Visual Studio Can Use Microsoft Test Manager
Hello all!
I was wondering what versions of Visual Studio can use Microsoft Test Manager, a friend is having issue using MTM and can't get it working. She doesn't know if it's a product key issue or if it's the version of Visual Studio she's using, She is using Visual
Studio Server 2013.
Thank all!Hi machopper,
Thank you for posting in MSND forum.
Based on your issue, as far as I know that the Visual Studio Ultimate, Visual Studio Premium, Test Professional include MTM.
Reference:
https://msdn.microsoft.com/en-us/library/jj635157.aspx?f=255&MSPPError=-2147217396
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
hi
i Install Visual studio Ultimate 2012 RTM and ..
when i want to create a new project (windows application form C#) give me this error :"Visual Studio does not have permissions to read the template information from the system registry. This is often caused by registry permission problems"
what can i do for this problem ?
how can i solve this ?
Visual studio Ultimate 2012 RTMThis issue is quite wide-spread and it affected older Visual Studio versions. I am disapointed by the amount of junk advice and the lack of proper stance from Microsoft.
The only correct solution I could find was provided by HallCrash on July 01, 2010 in this similar thread:
social.msdn.microsoft.com/Forums/en-US/vbexpress2008prerelease/thread/c273b0e1-7f46-4065-afaf-4edf285d2531
Ironically, that thread is locked and I was not able to give recognition to HallCrash there ...
You'd have to scroll almost to the bottom to find HallCrash's solution. That solution is based on a Microsoft supported tool (SubInACL) which can be downloaded here: microsoft.com/en-us/download/details.aspx?id=23510. It limits the registry changes strictly
to Visual Studio. Nevertheless, start by creating a System Restore Point.
I do not trust and would not recommend using unknown software (such as the Softpedia suggestion) for this.
Cheers -
Hi There,
I'm not sure if this is the right place to post the query :)
I'm new to visual studio performance testing. I created a webtest script using Visual Studio Ultimate 2013 for downloading a .pdf from a website. I gather from the response bytes that the script is doing its job.
My question is where could I find the .pdf file if it is getting downloaded? or is it not downloading the file physically.
Appreciate your support. Many thanks in advance.
RenjithI would not expect the file to be saved automatically in a web test. The file's contents will be in the "bodybytes" and "bodystring" of the relevant HTMLO response. So you can write some file writing code in a plugin.
Here is a version of the plugin that I have used:
public override void PostRequest(object sender, PostRequestEventArgs e)
string body = e.Response.BodyString;
if (body == null)
e.WebTest.AddCommentToResult("No response PDF");
else if (string.IsNullOrWhiteSpace(body))
e.WebTest.AddCommentToResult("PDF is empty");
else if (e.Response.BodyString.StartsWith("\x0d\x0a%PDF"))
string fileName = "The_response.pdf");
int bodyLength = e.Response.BodyString.Length;
File.WriteAllBytes(fileName, e.Response.BodyBytes);
string message = string.Format("PDF of {0} bytes written to file {1}", bodyLength, fileName);
e.WebTest.AddCommentToResult(message);
else
e.WebTest.AddCommentToResult("Unknown file contents");
Regards
Adrian
Maybe you are looking for
-
All of a sudden I can't print my calendar in 'month' view. It only does day or list. Any thoughts?
-
FPGA project - custom cRIO module driver development
Hi! I'm developing the driver for my custom cRIO module. The module has 4 analog input channels. After analog-to-digital conversion I need to transmit the digital data via the cRIO bus. I placed an FPGA I/O node on my block diagram (see the attached
-
Whenever I scan a paper, it won't open as a PDF. I used to be able to scan and save as PDF, but not anymore. It comes up as an error, so I need to open with another program. I checked for updates and ran a repair, which didn't help.
-
Question Aperture as a Browser for Viewing Photo Library
Hello, I am been using Nikon's ViewNX as a browser for viewing photos mainly for workflow. It is real buggy with Snow Leopard OS 10.6.2 ..... freezing and all. Use Photoshop for adjusting photos. Question: Is Aperture worthwhile to use for Browsing P
-
How to create Drill through's from BPC to ECC and BEX
Hi Experts, @Greetings@ Am new to BPC can any one help me on Drill trough's. I want to create a drill through to ECC system and BEX Query. Thanks for support in advance. Regards, Harini.