SCOM R2 - Access MP catalog from console using proxy

Hello,
Every workstations and servers in the company have to use a proxy to access to internet.
Is there a way to access the MP Catalog from the SCOM R2 console in such a configuration ?
Regards.
François

Hi there,
Below the internals of communications between OpsMgr2007R2 Console and MPCatalog.
HTH,
Nader.
MCTS Windows Internals (Beta Exam)
1-DNS resolution for QRecord: go.microsoft.com.
2-The famous Three-way handshake between source and destination Host.
3-HTTP Request, POST fwlink URI: /fwlink/?LinkId=148038&clcid=0x409
4-TCP Acknowledgement from www.go.microsoft.com.
5-HTTP Response, HTTP/1.1, Status Code = 100, URL: /fwlink/.
6-HTTP Payload, URL: /fwlink/, Soap: xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
7-TCP Acknowledgement from www.go.microsoft.com.
8-HTTP Response, HTTP/1.1, Status Code = 302, URL: /fwlink/ StatusCode: 302, Moved temporarily
9-TCP Acknowledgement to finish the communication.
10-New DNS resolution for QRecord: www.microsoft.com.
11-The famous Three-way handshake between source and destination Host.
12-SSL handshake between source and destination host (207.46.19.254 in my case).
13-SSL encrypted communications.

Similar Messages

Can't access internal network from VPN using PIX 506E

Hello,
I seem to be having an issue with my PIX configuration. I can ping the VPN client from the the internal network, but can cannot access any resources from the vpn client. My running configuration is as follows:
Building configuration...
: Saved
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password N/JZnmeC2l5j3YTN encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname SwantonFw2
domain-name *****.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list outside_access_in permit icmp any any
access-list allow_ping permit icmp any any echo-reply
access-list allow_ping permit icmp any any unreachable
access-list allow_ping permit icmp any any time-exceeded
access-list INSIDE-IN permit tcp interface inside interface outside
access-list INSIDE-IN permit udp any any eq domain
access-list INSIDE-IN permit tcp any any eq www
access-list INSIDE-IN permit tcp any any eq ftp
access-list INSIDE-IN permit icmp any any echo
access-list INSIDE-IN permit tcp any any eq https
access-list inside_outbound_nat0_acl permit ip 192.168.0.0 255.255.255.0 192.168.240.0 255.255.255.0
access-list swanton_splitTunnelAcl permit ip any any
access-list outside_cryptomap_dyn_20 permit ip any 192.168.240.0 255.255.255.0
no pager
mtu outside 1500
mtu inside 1500
ip address outside 192.168.1.150 255.255.255.0
ip address inside 192.168.0.35 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool VPN_Pool 192.168.240.1-192.168.240.254
pdm location 0.0.0.0 255.255.255.0 outside
pdm location 192.168.1.26 255.255.255.255 outside
pdm location 192.168.240.0 255.255.255.0 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 192.168.0.0 255.255.255.0 0 0
access-group outside_access_in in interface outside
access-group INSIDE-IN in interface inside
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map client authentication LOCAL
crypto map outside_map interface outside
isakmp enable outside
isakmp identity address
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup swanton address-pool VPN_Pool
vpngroup swanton dns-server 192.168.1.1
vpngroup swanton split-tunnel swanton_splitTunnelAcl
vpngroup swanton idle-time 1800
vpngroup swanton password ********
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.0.36-192.168.0.254 inside
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
username scott password hwDnqhIenLiwIr9B encrypted privilege 15
username norm password ET3skotcnISwb3MV encrypted privilege 2
username tarmbrecht password Zre8euXN6HxXaSdE encrypted privilege 2
username jlillevik password 9JMTvNZm3dLhQM/W encrypted privilege 2
username ruralogic password 49ikl05C8VE6k1jG encrypted privilege 15
username bzeiter password 1XjpdpkwnSENzfQ0 encrypted privilege 2
username mwalla password l5frk9obrNMGOiOD encrypted privilege 2
username heavyfab1 password 6.yy0ys7BifWsa9k encrypted privilege 2
username heavyfab3 password 6.yy0ys7BifWsa9k encrypted privilege 2
username heavyfab2 password 6.yy0ys7BifWsa9k encrypted privilege 2
username djet password wj13fSF4BPQzUzB8 encrypted privilege 2
username cmorgan password y/NeUfNKehh/Vzj6 encrypted privilege 2
username cmayfield password Pe/felGx7VQ3I7ls encrypted privilege 2
username jeffg password zQEQceRITRrO4wJa encrypted privilege 2
terminal width 80
Cryptochecksum:9005f35a85fa5fe31dab579bbb1428c8
: end
[OK]
Any help will be greatly appreciated

Bj,
Are you trying to access network resources behind the inside interface?
ip address inside 192.168.0.35 255.255.255.0
If so, please make the following changes:
1- access-list SWANTON_VPN_SPLIT permit ip 192.168.0.0 255.255.255.0 192.168.240.0 255.255.255.0
2- no vpngroup swanton split-tunnel swanton_splitTunnelAcl
vpngroup swanton split-tunnel SWANTON_VPN_SPLIT
3- no access-list outside_cryptomap_dyn_20 permit ip any 192.168.240.0 255.255.255.0
4- isakmp nat-traversal 30
Let me know how it goes.
Portu.
Please rate any helpful posts

Access remote MonetDB from Oracle using ODBC

Hello,
I really need your help, I have been trying for more that one week to figure out what is the problem without success
Here is the details of my problem:
I have oracle 11g installed on machine1 (ubuntu 64bit) , and I have MonetDB installed on machine2 (ubuntu 64bit, ip= 192.168.56.101)
I need to access MonetDB database from oracle.
I followed the configurations steps but I get always the following error:
select "id" from "test"@monetdb;
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][MonetDB][ODBC Driver 11.11.11]Client unable to establish connection
{08001}
ORA-02063: preceding 2 lines from MONETDB
I installed unixODBC on the machine1 and I used MonetDB ODBC driver which generates the following odbc.ini file
[monetdb]
Description = MonetDB
Driver = /usr/lib64/libMonetODBC.so
Host = 192.168.56.101
Port = 50000
Database = demo
User = monetdb
Password = monetdb
Debug =
Here are my configurations:
tnsnames.ora:
monetdb =
   (DESCRIPTION =
      (ADDRESS =
         (PROTOCOL = TCP)
         (HOST =localhost)
         (PORT =1521)
      (CONNECT_DATA =
         (SID=monetdb))
      (HS = OK))
Listner.ora
SID_LIST_LISTENER=
   (SID_LIST=
      (SID_DESC=
         (SID_NAME=monetdb)
         (ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
         (PROGRAM=dg4odbc)
         (ENVS=LD_LIBRARY_PATH=/usr/lib64:$ORACLE_HOME/lib)
In $ORACLE_HOME/hs/admin I created the file initmonetdb.ora
HS_FDS_CONNECT_INFO=monetdb
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_SUPPORT_STATISTICS=FALSE
HS_FDS_SHAREABLE_NAME=/usr/lib64/libodbc.so
HS_LANGUAGE=american_america.we8iso8859p1
set ODBCINI=/etc/odbc.ini
when I do lsnrctl start i get the following
Log messages written to /u01/app/oracle/diag/tnslsnr/OracleUbuntu/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                26-OCT-2013 01:32:37
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/diag/tnslsnr/OracleUbuntu/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "monetdb" has 1 instance(s).
Instance "monetdb", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
any ideas why I get this error??
Regards
Baraa

Hi,
Firstly, try to configure your gateway listener on another port than 1521 as it is the default one for database. Don't forget to change also the port in TNSNAMES.ORA.
Then use the host machine or ip address rather than the local host in the LISTENER.ORA and TNSNAMES.ORA.
Avoid to use $ORACLE_HOME in the ENVS from LISTENER.ORA but use a complete PATH.
Then test your ODBC connection outside Oracle. What is the result?
Try to get result of the following commands on the Oracle machine1 :
$cd /usr/bin
$./odbcinst -q -d
$./odbcints -q -s
Change parameter in gateway init file:
HS_FDS_TRACE_LEVEL=DEBUG
Execute your SELECT statement:
select "id" from "test"@monetdb;
Get the gateway trace file in /u01/app/oracle/product/11.2.0/dbhome_1/hs/log and send us
Thanks
Regards,
Mireille MEGE

Consuming Data from Queue using proxy service

Hi , i am coming up the problem of consuming the queue .
My flow is like :
1. Created Connection factory(JNDI - cf) targeting Admin Server and queue(JNDI - q) targeting WllsbJmsserver.
2. Created A JMS based Buissness Service of Any XML type and it is used for publishing the incoming xml payload to the destination queue (q).
3. Now i am able to see the published payload on the console using monitoring option of the queue.
4. Now i have created the proxy service and gave the same url as given for BS (jms://localhost:7001/cf/q).
5.After activating the session the Messege Current Count on weblogic console is now coming 0 as i think it's being consumed up by the proxy service, but I am not able to see the consumed message.
6.I want to do some processing on the message, how to go about this?
My requirement is that i wanted to store some ID in a queue and used that particular id /consume that particaular id in some other proxy service .

Anuj,
I tried one more flow ...
My resources are:
1.BS :BSQ_Push
2.PS :PS_Read_Message
3.PS: PS_Publish_Message
I edit the pipeline of PS_Publish_Message and made a route to PS_Publish_Message service and added some more actions and i am listing up all the actions below step by step
Message Flow for PS_Publish_Message
a. Postiing Message In Queue stage:
Publish to [ BSQ_Push ] used , and Request Actions used : Log [ $body ]
b. Route to [ PS_Read_Messege ]
Message Flow for PS_Read_Message :
a. Reading Message Stage :
Log [$body ]
But at the end my logs are as follows when i run the PS_Publish_Message wth a request as <id>Abhinav</id> :
####<Apr 1, 2011 2:19:50 PM IST> <Error> <ALSB Logging> <Abhinav9639-g15> <AdminServer> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <62e9b948932bcb91:7dc8e539:12f0f9d195c:-8000-0000000000043f89> <1301647790389> <BEA-000000> < [Publishing Messege Pipeline, Publishing Messege Pipeline_request, Postiing Messege In Queue, REQUEST] ||||||||||||Posting Messege In Queue ||||||||||: <soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<id>Abhinav</id>
</soapenv:Body>>
####<Apr 1, 2011 2:19:50 PM IST> <Error> <ALSB Logging> <Abhinav9639-g15> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <62e9b948932bcb91:7dc8e539:12f0f9d195c:-8000-0000000000043f89> <1301647790551> <BEA-000000> < [Reading Queue Pipeline, Reading Queue Pipeline_request, Reading Message, REQUEST] ---------------------Log For ID in Read Proxy Flow--------------------------------: <soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<id>Abhinav</id>
</soapenv:Body>>
####<Apr 1, 2011 2:19:50 PM IST> <Error> <ALSB Logging> <Abhinav9639-g15> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <62e9b948932bcb91:7dc8e539:12f0f9d195c:-8000-0000000000043f89> <1301647790578> <BEA-000000> < [Reading Queue Pipeline, Reading Queue Pipeline_request, Reading Message, REQUEST] ---------------------Log For ID in Read Proxy Flow--------------------------------: <soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"/>>

Accessing mysql database from oracle using dg4odbc

I've been trying to create a database link from a MySQL database to Oracle using the Oracle dg4odbc gateway. I downloaded and installed DataDirect's ODBC package which includes mysql ODBC library (ddmysql24.so) and a generic ODBC libary (libodbc.so). After creating the DSN in odbc.ini, I tested it and it can connect to the mysql database. Then I created the init{SID}.ora file in hs/admin directory, added dg4odbc lines in the listener.ora, and added lines in tnsnames.ora. Then I tnspinged the new SID with success. Finally, I created the database link. However, when I tried to access the database link using the commands "select * from mdl_user@moodle;", I got the ORA-28500 error like the following:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[DataDirect][ODBC 20101 driver][20101]You have an error in your SQL syntax;
check the manual that corresponds to your MySQL server version for the right
syntax to use near '"mdl_user"' at line 1
ORA-02063: preceding 2 lines from MOODLE
My mysql database is utf8 by default. Do I have to use latin1?
It seems to me that the dg4odbc translates the sql commands incorrectly (having double quotes around the selected table).
Any help is greatly appreciated.
Jeffrey

The syntax error occures for example when MySQL isn't running in ANSI mode and thus does not allow double quotes around the objects. DG4ODBC 11.1.0.6 by default always adds double quotes to table/column/view names.
A quick test to check if you hit the double quote issue would be to set the MySQL DB into ANSI mode:
- Open SQL*Plus
- execute:
DECLARE
ret integer;
c integer;
BEGIN
c := DBMS_HS_PASSTHROUGH.OPEN_CURSOR@moodle;
DBMS_HS_PASSTHROUGH.PARSE@moodle(c, 'SET SESSION SQL_MODE=''ANSI_QUOTES'';');
ret := DBMS_HS_PASSTHROUGH.EXECUTE_NON_QUERY@moodle(c);
dbms_output.put_line(ret ||' passthrough output');
DBMS_HS_PASSTHROUGH.CLOSE_CURSOR@moodle(c);
END;
- Now run your select statement
=> if it now works, you can permanently change the MySQL config to be ANSI compliant or you can apply the 11.1.0.7 patchset to DG4ODBC.

Access proxy from terminal using proxy auto-config

I know about using ntlmaps to wrapper my proxy configurations e get access from Terminal, iTerm2, &c exporting http_proxy variable and others. But I don't want go on using this approach because it simply ***** (forgive me for this word...) for a lot of issues.
I would like simply setup my proxy environment on Network Preferences/Advanced/Automatic Proxy Configuration: (host: http://myproxy/proxy.pac) and using this setup for a whole system, including my terminals. Therefore, are there any way to reach it?
Another details, my proxy is authenticated and uses ntlm type and in browser I use internet without problems.
Thanks a lot for any help!
-Leo

I am not quite sure what you are looking for. Mac OS X has supported auto proxy configuration since 10.6 Snow Leopard was introduced (acutally in response to a request I made ). If you open System Preferences, click on Network, then go to the Advanced settings for your network interface, in the Proxies tab there is an option called Auto Proxy Discovery. This is different to Automatic Proxy Configuration which was also available in previous versions of OS X. Automatic Proxy Configuration uses a selected PAC file (Proxy Auto Configuration file) but Auto Proxy Discovery uses the WPAD method of finding your proxy server.
See this article for information about WPAD (Web Proxy Automatic Detection).
http://en.wikipedia.org/wiki/Web_Proxy_Autodiscovery_Protocol
WPAD uses either an option advertised from your DHCP server giving the address of your proxy server, or WPAD can use a standard URL based on your domain name to download a dat file containing your proxy server details.
I have seen reports saying the the DNS method is problematic with Mac OS X but also seen reports that the DHCP method does work with this option successfully. So my suggestion is to define the DHCP option code 252 to advertise your proxy server.
Note: Thanks to yet another request I made in the past the Mac OS X DHCP Server can be manually configured to define additional DHCP option codes including option 252. The ability to define DHCP option codes was added in Mac OS X 10.5 Server (Leopard).

Access Windows Drive from UNIX using Java

Does anyone know if you can access a windows share from a unix machine using Java?
What options are available? Would a samba client have to be installed on the UNIX server first?

mdreelin wrote:
Does anyone know if you can access a windows share from a unix machine using Java?If your operating system can see the file system, I don't see why it wouldn't be available to Java.
What options are available? Would a samba client have to be installed on the UNIX server first?Well you'd have to do something like that, otherwise you'd have to remote it via RMI or something (not recommended).

Unable to access ECC transactions from CRM using Transaction Launcher

Hi Folks, we are trying to create a booking request using VA11 from portal. For this we have configured transaction launcher in CRM which will connect to ECC system from portal and VA11 screen will be launched. For this we have done the necessary configuration in transaction launcher (Including RFC destination and logical system) and this is working fine in Dev system but not in quality system. We are able to see SAP screen with toolbar Menu and System but not the entire transaction (refer image below). Our questions here are,
1)     What user type has to be configured when connecting from CRM to ECC? (System, Communication data or any ohter)
2)     If this has to work with user as Dialog, is there any supporting document from SAP saying this should be Dialog user?
3)     Is there any other issue and need development specifically related BOR TSTC?
Warm regards and thanks in advance for your time.
Prasad

Hello JC,
Yes, it is possible . You have to create new work center link or Direct Link for the existing transaction launcher.
Transaction Launcher
Regards,
Ashik

Accessing SQL Server from ORACLE using Transparent Gateway

So I had downloaded the gateway installer and was following the guide here to set up the Transparent Gateway for SQL Server: http://www.orafusion.com/art_orahs.htm
After I had created the database link, I was prompted the following error when trying to do a simple select statement from the SQL Server DB:
>
ORA-12154: TNS:could not resolve service name
12154. 00000 - "TNS:could not resolve the connect identifier specified"
*Cause:    A connection to a database or other service was requested using
a connect identifier, and the connect identifier specified could not
be resolved into a connect descriptor using one of the naming methods
configured. For example, if the type of connect identifier used was a
net service name then the net service name could not be found in a
naming method repository, or the repository could not be
located or reached.
*Action:
- If you are using local naming (TNSNAMES.ORA file):
- Make sure that "TNSNAMES" is listed as one of the values of the
NAMES.DIRECTORY_PATH parameter in the Oracle Net profile
(SQLNET.ORA)
- Verify that a TNSNAMES.ORA file exists and is in the proper
directory and is accessible.
- Check that the net service name used as the connect identifier
exists in the TNSNAMES.ORA file.
- Make sure there are no syntax errors anywhere in the TNSNAMES.ORA
file. Look for unmatched parentheses or stray characters. Errors
in a TNSNAMES.ORA file may make it unusable.
- If you are using directory naming:
- Verify that "LDAP" is listed as one of the values of the
NAMES.DIRETORY_PATH parameter in the Oracle Net profile
(SQLNET.ORA).
- Verify that the LDAP directory server is up and that it is
accessible.
- Verify that the net service name or database name used as the
connect identifier is configured in the directory.
- Verify that the default context being used is correct by
specifying a fully qualified net service name or a full LDAP DN
as the connect identifier
- If you are using easy connect naming:
- Verify that "EZCONNECT" is listed as one of the values of the
NAMES.DIRETORY_PATH parameter in the Oracle Net profile
(SQLNET.ORA).
- Make sure the host, port and service name specified
are correct.
- Try enclosing the connect identifier in quote marks.
Error at Line: 3 Column: 27
>
Here are my configuration files:
initMSQL.ora
>
HS_FDS_CONNECT_INFO=webdatasvr:1433.InfoWeb
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
>
listener.ora
>
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC=
(GLOBAL_DBNAME=UGCMAC)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME=UGCMAC)
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = MSQL)
(ORACLE_HOME = C:\oracle\product\11.2.0\tg_1)
(PROGRAM = dg4msql)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS LIST=
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1524))
>
tnsname.ora
>
UGCMAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = UGCMAC)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MSQL=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1524))
(CONNECT_DATA =
(SID = MSQL)
(HS=OK)
>
Can anyone assist me? thanks!

Hi kgronau,
>
After changing a listener.ora file you need to STOP and START the listener to get the changes loaded. It looks like your listener is not serving the 1524 port which could be related to the fact that you didn't stop/start the listener after you've edited the listener.ora file.
... But as stated earlier - please do not use a 10.2 listener to start an 11g gateway. Instead configure the listener of the gateway home.
>
I did restart my listener under services.msc whenever I make the changes but there are no effect. Please also note that I can only find "OracleOraDb10g_home1TNSListener" under my services.msc. There is no 11.2 Listener. I did install the gateway and the installation was successful as far as I can tell. But perhaps because there's no 11.2 Listerner under my services.msc, could that mean it was a bad installation?
>
Next point is the tnsping you've used is 11.2. You need to make sure that you use the tnsping of the Oracle Database home as the database initiates the gateway connection so the database home tnsnames,ora needs the tns entry for the gateway.
>
My current PATH environment variables setting is as follow: C:\oracle\product\11.2.0\tg_1\bin;C:\oracle\product\10.2.0\db_1\bin; So perhaps, I just need to ensure the 10.2 ORACE home is the first?
>
As a final tip: There are so many web sites explaining how to configure DG4ODBC - many of them are faulty. If you need a reliable configuration, please have a look at "My Oracle Support" => How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit to Connect to Non-Oracle Databases Post Install     [Document 466225.1]     )
>
Is there a link?
Edited by: omnri on 21-Jul-2011 23:59

TIME_OUT when accessing Oracle table from SAP using native SQL

Hi,
I have a problem in one of my native SQL statement. It takes a long time accessing the table considering that the number of records to be retrieved is only small.
Something happened on the Oracle system. But, stilll to be confirmed. Looking further at the issue, it seems that when the value in the where clause equated is a literal (meaning the value is not declared in DATA or CONSTANTS in the ABAP Program)
Example
1.
EXEC.
WHERE FIELD = '1'
ENDEXEC.
instead of
2.
CONSTANTS: c_1 value '1'.
EXEC.
WHERE FIELD = c_1
ENDEXEC.
i found that when the way of coding is same as Example 1, a time-out error occurs. But when in Example 2, no issue.
Can someone explain this?
Thanks!

Repetitively asking the same question again and again is against the forum rules.
Please post an explain of the SQL statement on the remote machine.
Markus

How to access streaming vedio from server using RMI

Hello please provide me the solution
i have one vedio file in remote system and i want to import it to my local system using RMI after that i have to control it like vedio player.This entire application should be developed in struts.
please give me a basic idea how to approch and wht r the files i need to import and is there any classes available to control the remote streaming vedio.

If you are using Struts then you are in a web environment. So there is no RMI for the client (browser), it is just HTTP.
About streaming video take a look at JMF (Java Media Framework). And if you are over HTTP you can use something like this to embed your video streaming:
<html>
<body>
<object width="320" height="63"
classid="CLSID:6BF52A52-394A-11D3-B153-00C04F79FAA6"
ccclassid="clsid:22D6F312-B0F6-11D0-94AB-0080C74C7E95"
codebase="http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab#Version=6,4,5,715"
standby="Cargando los componentes del Reproductor de Windows Media de Microsoft..."
type="application/x-oleobject">
            <param name="filename" value="http://192.168.1.31:1025/01_Alegria.mp3">
            <param name="url" value="http://200.32.112.67/Estacion_del_Sol">
            <param name="AutoStart" value="true">
            <param name="volume" value="100">
            <param name="uiMode" value="mini">
            <embed type="application/x-mplayer2"
        pluginspage="http://www.microsoft.com/Windows/Downloads/Contents/Products/MediaPlayer/"
        width=218
        height=129> </embed>
        </object>
            <param name="url" value="http://200.59.146.10/rockandpop-ba">
</body>
</html>Hope it helps

OSB - Load Resources From URL using proxy

Hi all,
How does one force the OSB to use a proxy server when using the Load Resources From URL option?
I'm trying to create a wsdl resource from an url, but the OSB needs to use a proxy to access the url.
I've tried creating a Proxy Server under System Administration -> Global Resources -> Proxy Servers, but I can't seem to find a place to make it use a proxy server?
How do guys and gals get wsdl files though a proxy?
Thanks!
William

Hi Milan,
Thanks for your reply.
I tried setting -Dhttp.proxyHost=12.34.56.78 -Dhttp.proxyPort=80 in the startWebLogic.cmd file under the ...\domain\bin folder. But still can't download the wsdl.
Where did you set the property?
thanks again,
William

Calling Web Service from CRM using proxy

Hi all,
I'm facing a problem trying to call a web service from CRM (WAS 620) via XI 3.0. The response that XI recieves from the web service contains SOAP Envelope, and the mapping fails because of it. I built the proxy manually, because if I load WSDL the proxy generation in CRM generates error that sais that external definition coudn't be used.
Is there any way to remove SOAP envelope from the response while mapping?
Is it possible to call web service from WAS 620?
Thanks!!!!
Anya.

Hi Manish,
SOAP adapter does pass the message to XI (this message contains SOAP envelope although XI expects to get message without it), and during the mapping step i get "Runtime Exception in Message-Mapping transformatio~".
I suppose it's because i created proxy manually. I did so because when i imported WSDL, and tried to generate proxy in CRM, i got an error message that said that proxy couldn't be generated because external definitions are only allowed in XI 3. But my XI version is 3.0! And when I generate the same proxy in my R/3 system that is installed on WAS 640, it works.
What can I do?
Cheers,
Anya.

Cant access Cs Live from application via proxy server

Hi,
I have a problem with CS Live. When I try and access it via a web browser I can login ok, but when I try using the application extension and sign in that way it gets rejected.
Web access is via a Bluecoat proxy server. Checking the access logs I found the following message (ip's replaced with x's):
xxx.xxx.xxx.xxx - - authentication_failed PROXIED "Computers/Internet" - 407 TCP_DENIED CONNECT - tcp services.acrobat.com 443 / - - "Adobe-ServiceManager" xxx.xxx.xxx.xxx 341 179 -
I have rules setup inside the proxy for whitelist's that can allow access for problem websites, but including services.acrobat.com inside them doesnt have any effect.
has anyone every come across this as it was working ok with no changes made a week ago and now it doesnt.
Thanks

Having the same problem - Having no luck either, sorry I'm of no help but would appreciate some help if you figure something out. Thanks
Stephanie

Getting partial data in PI from ECC using proxy

Hi Consultants,
I am working on Proxy to SOAP scenario. I have developed almost 20 scenarios. All are working fine as expected except 1 scenario.
This scenario is troubling me and the problem is, in inbound message of PI, I am not getting whole data which is showing in proxy test in ECC system.
Can anyone help me in solving this issue?
Thanks in advance.
Regards,
Naushad

Abhishek,
I am filtering messages by date not by status. And I do not have authrizations to see the Integration Engine configuration.
So, I have requested basis team to change the trace_level.
It is priority for me to resolve this issue and I guess it is proxy issue. But I am not sure and I am not able to findout where is the issue and what is the solution.
Regards
Naushad
Edited by: Nausheen shaik on Apr 20, 2010 3:44 PM
ECC SXMB_MONI response payload and the PI SXMB_MONI inbound message payload is same.But there is a difference between ECC SXMB_MONI payload and the ECC SPROXY payload. If any one face this kind of issue then please provide me your inputs.
As this issue is in ECC, I will log this query in ABAP Development forum.
Regards,
Naushad
Edited by: Nausheen shaik on Apr 24, 2010 10:57 PM

SCOM R2 - Access MP catalog from console using proxy

Similar Messages

Maybe you are looking for