Score Layout and Print section

I am struggling a bit with printing a score. I can't seem to get around two issues.
1. Is there a way to remove notes that are needed for MIDI but not for score? IE - on my first violin, I need to input C0 and C#0 to change bow technique, however, these notes should not be in the score.
2. I am using a Tibetan Prayer Bowl throughout the cue. It's an audio track recoreded rather than MIDI. I would like to score it, but there is not corresponding MIDI track.
I have read through manual a number of times, but am having difficulting grasping the idea of instrument sets, Any help is much appreciated.
Cheers
Dee

Anyone .... ??

Similar Messages

Authorization for "Select Layout and Print"

I am using Business One 8.8 PL 18. The option under the File menu for "Select Layout and Print" is available for super-users and some other users. We want it to be available for all users. What authorization setting controls this function? Thanks.
Marcia

Under "General" section, assign "Full Authorization" rights to "Print Layout Designer"
George

Transfer order layout and print options

Hi Guys
Where we can see the Transfer order layout and Printer options settings in SPRO

Hi,
Refer to this path,
SPRO-IMG-Logistics execution-Warehouse Management-Activities-Define Print Control.
Regards
Ravi Shankar.

How to layout and print business cards in Avery 8873

I am new to Pages and can not figure out how to create business cards that register and print in
an Avery form 8873 Business Card sheet. This should be so simple.
Please advise he simple trick.
Mike

Have you opened and used the Avery word template for that sheet from Avery's website?
Tight registration is always a problem with printing to a desktop printer. The paper just doesn't have an accurate paper feed.
It is always best to design your cards with generous tolerances so nothing vital gets trimmed off, especially when doublesided printing.
Peter

OSA: fonts in offline layout and print layout

All:
For Objective Setting and Appraisals we have our appraisal templates set up and the download function working. When we print the document using the "standard" template the fonts are too large for the space allowed for them, and are thus cut off.
We have the same problem with the offline layout in which the document can be completed and uploaded; the fonts are cut off since they are too large.
Does anyone know how to address this problem? Is there a setting I'm missing? Are there other layouts than the default? Can you create your own layout?
Thank you,
Jerry

We found that OSS Note 1372480 will fix this, in case anyone else has this problem.

Problems with layout and printing tables

Hello,
my first ADOBE-Form "projekt" makes more problems than expected, especially with the layout.
Layout Problem 1:
I want to print the data of a table (thats my only parameter in the interface and the table itself is deep structures with other tables). So I have bound the "standard" subform (the one ADOBE inserts automatically" to the table and selected that the subform is repeated after every record.
Anyhow ADOBE processes only the first record of this table.
Maybe the reason is, that I need to display the data of one record on two pages. So I created two pages each with the "standard" subform and bounded both to the table.
What am I doing wrong? Do i have to do the page split another way?
Layout Problem 2:
I have a text field with multiple lines allowed. But it overwrites the content of the object, that comes below.
Its the same with my other subforms for table data.
How can I tell the system, that an object needs to be pushed downside on the page, if the context above needs more space?
Thanks in advance for your answers!
Regards,
Frank

Yeah, you say it
subforms and they "flowing" etc. properties are killing me, but after some hours I think I got the concept.
The form looks quite well, everything is pushed downwards if an item above gets expanded.
But one problem remains: this form only prints the very first record of my table.
I have no problems with the tables nested inside the main table. They work perfectly and everything is fine there!
But I cant tell the form to print my other records...
I somehow played around and made it work, but then the next record was not on the next page but directly after the subform created by the context area (if this terminology is correct).
I played around even further and created a paging with reference to the context area, but then the first page looked quite odd (page 2, 3, 4... looks perfect).
I tried to fix also this and then I somehow messed up my form and could not undo my changes (it was only a "to play with" copy...)
Just to explain it again:
I have one table (lets call it the "main table" because its the import parameter of the interface) and inside this table are other nested tables.
I want to print one record of the "main table" across 2 pages and after that the next record of the "main table" should be printed beginning at the 3rd page.
As I said, the two pages look wonderful (even though I have not yet covered the issue of what should happen, two pages are not enough for one record of the "main table"). but as soon as I try to display the next records of the "main table" as well, i am stucked in unpredictable layout problems.
I cant believe that I try anything extraordinary. Lets hope that I can solve this with your very appreciated help.
Thanks in advance Otto!!!
And kind regards, Frank

Setting up, populating and printing a fixed layout sheet from the prowser

HI Gentlemen:
Can you help me in my problem? Given a fixed, customer-defined form layout with boilerplate text intermixed with variables, I have to generate it, populate it from my relational Oracle tables and print it locally on the customer's printer. Every component is precisely positioned with font type, size and color prescribed as well. I have never had this kind of task, which resembles to an Oracle Report definition. Please say where can I find further instructions and probably a working example.
Thank you, kind regards from
Miklos HERBOLY

The steps for creation of an AcroForm are as follows:
1) Install Adobe Acrobat at your workstation. A new menu call "Adobe PDF" will appear in MS Word/Excel/Powerpoint. Use Word/Excel to design your layout and print it to PDF using the menu item "Adobe PDF->Convert to Adobe PDF";
2) Open the generated PDF document in Adobe Acrobat and add the necessary form fields, buttons, etc. Read the topic "Forms" in the Acrobat's help first. (N.B. Do not use the Adobe LifeCylcle Designer as it will create not an AcroForm but another type of form, use the menu item "Forms->Add or Edit Fields ..." instead);
3) Use the Adobe FDF Toolkit in a servlet to create a FDF response in order to activate the form from a Web application. (See this simple example).
Some useful links:
- Developing Acrobat Applications Using Javascript (Read the chapter "Using Javascript in Forms").
- Acrobat Javascript API Reference
- Adobe FDF Toolkit

Score and printing, redo all formatting every time..

I have a big problem that needs to be resolved ASAP!
I arrange music for big band (or large ensemble) and when I get my individual parts looking good, and print them out, I can't get the same page layout if I have to go back and change anything in my individual parts. Let's say that if I change one chord and that changes one bar in the song, I have to redo all the formatting every time and for ALL THE BAND! 19 parts...
Is this possible to get something locked?
It's to much work compare to Finale!
Cheers.
jOTaz

Topic : SCORE, MAJOR BUG
the answer is there!

How to Extract Data from IT 0025 and Modify the layout for Printing

Hi All,
Query----> My client has a requirement to output the appraisal data in a given format from IT 0025. (The entire appraisal done for the employee)
I would like to know from where this data will be picked up is this data stored in some cluster table and how can we change the layout for printing in the desired format?
Note: PA and PD is Integrated. When we create appraisal in IT 0025 no record gets created in PA0025, in which table does the record gets created and how to retrieve the data?

hello,
normally stored in pa0025.
are you using the old or new appraisal system?
if you are using the new one. its not stored in pa0025 it is done with relationships..
regards
stefan

Canon LBP6000 print driver - no printer appears in the 'add printer' section' I have installed Mac CAPT Ve r340 and nothing shows.r

I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop.
I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options. So very open to advice.
Thanks
T.

The ability to see the LBP6000 in the Add Printer view is not reliant on the printer driver but the USB cable. If you have the printers USB cable connected directly to the Mac, as opposed to having it connected to the Windows computer you mention or to some sort of USB hub, then it should appear in the Add Printer > Default view. If it does not show, then try another USB cable. You can also open System Information on the Mac and select the USB section in the left column. Then in the top right pane you will see all the USB busses on the Mac and the LBP should be seen under one of the busses if the USB cable is okay.
With regards to the action to remove all printers, I would bet that you performed a reset of the printing system.

Print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9

I'm trying to print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9. HELP!!Version 7.0 (826.4)
I'm using Preview Version 7

Hello @kgingeri1,
Welcome to the HP forums.
If you have sent a test print via ePrint, and experience this issue, i would call the Cloud Services department.
If ePrint works fine, it is definitely a Google Cloud Print issue.
Also, when you print from your android device, are you using Google Cloud print or the HP ePrint app?
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

How to print Photo layouts and Collages with Photoshop CS4?

Hello all,
I just downloaded PhotoShop CS4 trial version and comparing it to Photoshop Elements 6. I noticed that there are no ways to print photo packages nor photo collages in CS4 ! The only thing CS4 can do is to print one photo at the time. Adobe Bridge only allows to output PDF photo layouts without any control on the output.
Can somebody let me know if i need to purchase an Adobe Photoshop CS4 add-on package to be able to print photo packages/layouts and also create collages, or i have to stick with Elements 6 ?
Many thanks for your support !
Sam
Québec City

Dear Bob,
Many thanks for the reply !
I have searched all over the Photoshop forums and never found anything about creating collage in CS4 !
I have contacted Adobe in the last two evenings and the only thing they done were to transfer me back and forth between the Sales and service department and nobody were able to help me out.
This is not a very good image they are projecting !
I am a photograph and a very big PhotoShop Elements user, i downloaded the trail version of CS4, apart from a few added features, i have to say that PE does most of the work i need.
But i still need to convince myself if i want to jump in the CS4 world !
The only stopper for me at the moment, is printing and collage and CS4 seems to be lacking these features.
Instead of directing me to the forum, would you know the direct answers to the following questions:
1- Can i produce JPG format photo collages with CS4?
2- Can i print photo packages / layouts with CS4 ?
Or
3- Do i need to purchase an add-on software package ?
The Adobe Bridge ''output'' menu that comes with CS4 is well done, but you only can make PDF or XML files and you don't have any control on the composition: totally useless for me !
Thanks Bob for your feedback !
If i need to purchase an additional package, i'm removing CS4 from my computer and keeping PhotoShop Elements !
With kind regards,
Sam

Duplicate/transfer and print layout dimensions to 8.5x11 doc not working

I am trying to set up a document with images in Photoshop using the grids and guides. I've set the page to a 8.5 x 11. I want my image to start exactly 1/2 inch from the top of the page. I set my guide to 1/2 inch and snap image to it. I print the page and the image is NOT 1/2 inch from the top. (I am trying to duplicate/transfer a layout and it's dimensions) Why does it do this and is there a way to reproduce and print the layout exactly using grids and guides?

you are correct, I do not have ID and I suspect my HP inkjet printer has something to with it...I have Photoshop CS3 on a 24" Imac and the workflow is pretty much from Ps>File>Print... (or print one copy) BTW Ramon, is there a way to work around that border/grip space or is InDesign the answer?(that I can't afford at the moment)
thanks guys though for the responses...anything is helpful as I'm on the bottom end of a steep learning curve with the adobe tools, etc.

Making XML elements (tags+attributes) visible in layout for PDF and print. Possible?

Is it possible to have the XML structure (tags and attributes) be made visible and formatted in the layout? Such a hard-copy reference of the layout (a print and online Drupal publication) would make the XML visible to those persons writing/editing content but who are not using InDesign or XML viewing/editing programs. And this would improve workflow considerably. TIA

Its the nextSibling of nxBook or, you may want to do it via
an array:
var xRootNode:XMLNode =xmlData.firstChild ;
var xnBooks:XMLNode =xRootNode.childNodes;
for (var j=0;j<xnBooks.length;j++) {
var attrib:Object =xnBooks[j].attributes
for (var sattrib:String in attrib ) {
trace(attrib[sattrib]+ " " + sattrib);

What is up with the Help and Support Section for Business Catalyst?

It has been very difficult for my customers and myself to access the help and support section of the site for Business Catalyst issues as we are constantly diverted to non-related Abode issues. The portal for support on Business Catalyst issue needs to be ISOLATED from ADOBE's main support section. It is bad enough that there are so many issues to deal with, but to add all the issues for all the applications is simply impossible to decipher and discover a solution.
Before the Adobe integration on the Cloud services it was much more simpler, wiith a much more efficient and cleaner layout, now every page looks like its generated by a bot that doesn't understand what I am looking for. Even the actual URL of the page is hidden so I can't even book mark it without opening the frame in a new window. My clients will not know how to do that.
Simplify plesase!
Teejay

Teejay,
Yes we are looking into this very thing and hope to improve this very soon. Not only making things a bit clearer but also a central location for all your BC support needs.
Kind regards,
-Sidney

Score Layout and Print section

Similar Messages

Maybe you are looking for