Authorization for "Select Layout and Print"
I am using Business One 8.8 PL 18. The option under the File menu for "Select Layout and Print" is available for super-users and some other users. We want it to be available for all users. What authorization setting controls this function? Thanks.
Marcia
Under "General" section, assign "Full Authorization" rights to "Print Layout Designer"
George
Similar Messages
-
The buttons are gone for selecting, editing, and printing under my HP Smart Web since HP dialed in and fixed another problem. I have uninstalled and reinstalled the software but still no luck. All that shows up is the "HP Smart Web Printing" banner with the X to exit; that's it, no options listed below. My computer has completely crashed twice since I started using it 1/4/10. The second time the person dialed in and changed the bios and a few things in msconfig but I don't see anything there that would cause the smart web printing. HELP. Am I missing something really silly since I am a new user of HP Smart Print?
Thank you in advance if you can help!
^j^Put behind you the troubles of yesterday, today's a new day full of blessings.
^j^May you and your loved ones be blessed with peace, love, joy,and health now and forever.
^j^Put behind you the troubles of yesterday, today's a new day full of blessings.
^j^May you and your loved ones be blessed with peace, love, joy,and health now and forever.
^j^CarrieI am REALLY annoyed to read this post. I have spent a lot of time to try and fix my computer (which I don't have with 5 kids...not your problem I know and NOT the point). It should NOT be this hard to update and fix a product. I DON'T WANT the Bing bar...and am feeling like I am being forced to accept it to make my puter run correctly because it is supported by HP. What....kind of service is THAT???????? I hope that someone from HP....admin or whatever...reads this. I am "madder" than mad. I have had HP products for years with few problems...and all of which I could find a solution for. This is unacceptable...and I hope someone listens. I don't know if I can trust HP again....when it won't even use the browser most use without problems. Sorry to the rest of the "forum" for venting...but I can't get help...am frustrated...find this out now...and it is nothing personal.
-
T-code: FBL1N - Change Layout , Select Layout and Save Layout
hi all,
T-code: FBL1N - Change Layout , Select Layout and Save Layout
3 of the layout was grey out and does not allow me to choose.
Anyone can help?
Thanks.
JooHi KK,
Pls follow the steps below:
1. In the SAP Screen where u get the Change layout icon is grey out.
2. Pls type /nSU53.
3. After that pls open a new session.
4. Pls type SUIM
5. Now, select the "ROLES"
6. Enter your SAP ID and the T-code and click execute
7. The roles will displayed and kindly double click it.
8. Go to the authorization object tab
9. Select display authorization object (Bottom left)
10.Select FIND and enter the authorization object where you can get from /nSU53. The authorization object is start with F_*.
11.Now, click on the display and you can see the authorization object is missing.
12.You can sent the screen shot and request the SAP FICO Functional Team to maintain it in the SAP System.
Assign points if useful
Thanks.
Joo -
Item availability for selected items and directly create the delivery
Hi All,
For a very big sales order ..lets say having 700 line items ...is there any convenient way to create the delivery for selected items ..e.g. 30-40 line items rather going and selecting the line items then doing the item availability.
do you have any LSMW format by which we can do the item availability for selected items and directly create the delivery.
kindly Guide me..
With Regards
Azeez.MohdHi ,
There is no stand way of doing it . You need to take help of abaper to do this :
1. Create a t code where if you give sale order number , it displays a report with all the items with a check box near to it as we see in SE16 .
2. This report could be best in ALV form where users can do "ctr+f" and search only the required materials then select those lines and press a button on the top of report .
3. Once the button is pressed , program will run vL01n ( create delv in backgrnd) in a BDC form . At time of delev creating , the bdc program in backgrnd uses only those items which were selected by user and not the other items .
4. Program will create a delv using a BDC in background and return the delv number for user to view tht.
U can also try using FM : RV_DELIVERY_CREATE to create delv in backgrnd after user selection if BDC is getting tricky.
Hopefully ,this shuld work and will be a easy process for the customers.
Let us know the outcome .. .
B O L ..
Hope this Helps !!! -
Transfer order layout and print options
Hi Guys
Where we can see the Transfer order layout and Printer options settings in SPROHi,
Refer to this path,
SPRO-IMG-Logistics execution-Warehouse Management-Activities-Define Print Control.
Regards
Ravi Shankar. -
Best Procedure for Creating Web and Print Images
Windows XP SP2, Adobe CS3 Design Premium
Hello,
I have created a book in InDesign and have placed the art from Illustrator into the pages and cover of the book. At the time the book was designed, I gave no thought to the need for having the cover and certain pages also available on the web. (Silly me...)
Is there any way to duplicate the native illustrator files and make them web safe (with the web safe colors) without having to create new swatches and use live paint to recolor the image?
Is there a standard procedure for designing images in Illustrator when you know you will be needing both web and print output? (I'd like to do it 'right' next time.)
Thank you so much for your help.
CathyHi
if you want to create the web service using the function module do the following steps.
the main requirement for creting the web service using the function module is the function should be RFC enabled.
1. To create web service of this Function Module
Go to Utilities ->More utilities->create a web service->from function module
2. A new wizard will be open to create the web service and click on continue.
3. Enter the web service name (any name that you want to give) and give the short description, select the Endpoint type as Fuinction Module and click on continue.
4. Select the Function Module name that you are using.
5. select the profile as Basic Authentication: SOAP Pro.
6. Press continue to release the web service. The web service is now created
To check the web service Go to the transaction WSADMIN and select the node
SOAP Application for RFC-Complaint FMs and expand the node and select your web service that you have created and expand the web service node up to the last .
Now to test the web service select the last node and click on the web service home page button and it will open the home page.
from this page u will get the wsdl file as well as you can testthe web service.
Thanks
Rinku -
Need a vi or a recipe for graph setup and printing
Has anyone got a vi that given a xy graph reference will twiddle the right properties to make an xy graph on a front panel look like it ought to in a published paper. White background, black lines, transparent legends, centered title, good fonts and font size etc. etc...
Also, if possible a way to print it to a file or printer so that what you see is what you get.
Thanks
LV 8.6 on Windoze XPClueless 1,
All of these properties can be customized except for creating a transparent legend transparent.
The font and font size can be easy changed by selecting the graph so it has the moving dash line around it and setting the font and size in the font menu. The defaut for this menu is 13pt Application Font.
The title of the graph can be centered simply by clicking and dragging it the the desired position. By default the title should snap to the right, center, and left justified position around the graph.
The colors of the major and minor grid lines can be access by right clicking on the graph, selecting Properties, and navigating to the Scales tab.
Changing to the plot background color is slightly more difficult because the property is not accessable the the Graph Properties dialog window.
To access this property right click on the graph and select Create » Property Node » Plot Area » Colors » BG Color
Place this property node on the block diagram
Right click on the property node and select Change all to Write
Right click on the block diagram to bring up the Functions Palette and select Dialog & User Interface » Color Box Constant
Wire the Color Box Constant to the input of the property node
Click on the Color Box Constant to bring up the color picker and select whatever color you desire. This wll be the background color for you graph.
The easiest way to export the graph to another program is copy and paste it. If you want to make an image of the graph so you can access it in a word processor I recommend copy and pasting it into Paint and saving it.
Mark
LabVIEW R&D -
Authorizations for BW reportings and BW BPS
Hello,
The project we are working on contains two aspects : one in BPS and one in BW reporting
First the user needs to input or change data in the BPS application and then he can check his figures in a BW Report. We want each user to have authorizations only for his company and his business unit.
So we created authorization objects (RSSM) with a typical user profile (does not have SAP_ALL and all profiles required to customize anything).
In this authorization object we put different characteristics such as : Company, Business Unit, Activity and Version.
In the (PFCG), for company and business unit we put the values needed for the user. For Activity, we put "change" and "display". And for version we put "*".
We can then change values in the BPS layouts but we do not have access to the concerned report in BW.
Could somebody help us on this matter ??? Or does somebody have informations on how to implement this kind of authorizations ?
Thank you very much for your helpHi Jacques,
I hope the following links and documents ll be useful to u.
<u>BUSINESS PLANNING AND SIMULATION BPS:</u>
go to https://websmp103.sap-ag.de/bi
-> SAP BW 3.5 -> SAP BW Business Planning and Simulation
Here you can find "HOW TO... Guides - BPS", "SEM-BPS ASAP" and other useful section with many documents...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ae9fba90-0201-0010-d490-cbf9a364de95
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/enhancements bw-bps formerly sem-bps in sapnetweaver 04.ppt
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/frequently asked questions - planning with sap netweaver bi.faq#q-6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d90209f-0501-0010-59a2-9243ac94a4d7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap bw business planning and simulation - how to guides list.htm
http://help.sap.com/saphelp_sem40bw/helpdata/en/05/242537cedf2056e10000009b38f936/frameset.htm
<u>Hierarchies in BPS appln :</u>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ae9fba90-0201-0010-d490-cbf9a364de95
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/enhancements bw-bps formerly sem-bps in sapnetweaver 04.ppt
<u>for BEx-reporting</u>
http://searchsap.techtarget.com/searchSAP/downloads/chapter-august.pdf
http://searchsap.techtarget.com/featuredTopic/0,290042,sid21_gci1121728,00.html?bucket=REF
Hope it helps...let me know
regards,
R.Ravi -
OSA: fonts in offline layout and print layout
All:
For Objective Setting and Appraisals we have our appraisal templates set up and the download function working. When we print the document using the "standard" template the fonts are too large for the space allowed for them, and are thus cut off.
We have the same problem with the offline layout in which the document can be completed and uploaded; the fonts are cut off since they are too large.
Does anyone know how to address this problem? Is there a setting I'm missing? Are there other layouts than the default? Can you create your own layout?
Thank you,
JerryWe found that OSS Note 1372480 will fix this, in case anyone else has this problem.
-
Authorization for material type and material views
Hello all,
I would need to restrict a user group, in creation (MM01) and modification of material master, based of type material and material views.
The authorization, for each user should be:
- view, modify and create of all views, except accounting (B) for type material ZFER;
- view, modify and create of all views for type material ZOFF.
I tried to create 2 roles in PFCG with the following authorization objects:
1) M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B)
2) ) M_MATE_MAR ACTVT = *, BEGRU = ZFER and M_MATE_STA ACTVT = *, STATM = B
but the effect is to be authorized, to all view for material type ZFER and ZOFF.
I have already updated the authorization group of the type materials (OMS2).
Is there a solution for this problem?
(component version SAP ECC 6.0)
Thanks.
Regards,
LucaI tried to create 2 roles in PFCG with the following authorization objects: 1) M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B) 2) ) M_MATE_MAR ACTVT = *, BEGRU = ZFER and M_MATE_STA ACTVT = *, STATM = B
- Are both these roles assigned to the same user? then your purpose is not solved, It is more or less like giving full authorization.
- One role should be
M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B) for view, modify and create of all views, except accounting (B) for type material ZFER. This should be assigned to one user
- Second role should be
M_MATE_MAR ACTVT = *, BEGRU = ZOFF and M_MATE_STA ACTVT = *, STATM = * for view, modify and create of all views for type material ZOFF. This role should be assigned to the second user.
Regards,
Subbu -
InDesign - export a PDF for web view and print
I have a brochure created for print in InDesign. I need to create a PDF for the web, that would be a link to download and print on a home printer. How do I accomplish this?
Thanks for any help!export smallest size or take the print PDF in to Acrobat and reduce the size there.
-
How to layout and print business cards in Avery 8873
I am new to Pages and can not figure out how to create business cards that register and print in
an Avery form 8873 Business Card sheet. This should be so simple.
Please advise he simple trick.
MikeHave you opened and used the Avery word template for that sheet from Avery's website?
Tight registration is always a problem with printing to a desktop printer. The paper just doesn't have an accurate paper feed.
It is always best to design your cards with generous tolerances so nothing vital gets trimmed off, especially when doublesided printing.
Peter -
Fix for WRT54G file and printer sharing
I have two computers, both connected via wireless. They were connected with a 2 year old Linksys router, that was working great, but got destroyed in a move.
I purchased a new linksys WRT54G router.
Symptoms were that both had great access to the internet, but I could not file and print share between them.
After 5 phone calls into tech support, I finally escallated to a senior tech support guy, who had me turn off the firewall.
I have McAfee firewall. I diabled the firewall for testing, and it all worked instantly.
So, I went to McAfee personal Firewall, Options on bottom left, and set a trusted range of ip addresses from 192.168.1.0 through 192.168.1.255, then turned the firewall back on. On my computer, I already had the policy of "trust devices on the local network", but for some reason that wasn't good enough.
For some reason, the McAfee does not like the new router. I know there are a BUNCH of posts on this forum, and other forums, and I would hate for Linksys to become known as not being a great product.
The first level tech support at Linksys told me "we do not support file and print sharing." I had to keep escallating to finally reach someone that understood the router SHOULD pass packets back and forth.
I never thought of the firewall.
Also, you have to adjust the firewall on every computer that you want to share devices or files off of.Do any experts know the reason of this problem? Thanks!
-
Authorization for order type and activity
Dear all,
is it possible to set the authorization in PS, that allow changes only for specific order types?
Scenario:
A user is allowed to display order type PS01.
But he is also allowed to create/change/display the order type PS02.
In transaction CN22 there is only the authorization object C_AFKO_AWK, which has the values for plant and order type, but the activity is missing. So if the user gets both order types and also transactions CN22 and CN23, he can change both order types.
Is there a solution for this problem?
Thank you!
Regards,
StefanI tried to create 2 roles in PFCG with the following authorization objects: 1) M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B) 2) ) M_MATE_MAR ACTVT = *, BEGRU = ZFER and M_MATE_STA ACTVT = *, STATM = B
- Are both these roles assigned to the same user? then your purpose is not solved, It is more or less like giving full authorization.
- One role should be
M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B) for view, modify and create of all views, except accounting (B) for type material ZFER. This should be assigned to one user
- Second role should be
M_MATE_MAR ACTVT = *, BEGRU = ZOFF and M_MATE_STA ACTVT = *, STATM = * for view, modify and create of all views for type material ZOFF. This role should be assigned to the second user.
Regards,
Subbu -
Releasing authorization for maintenance order and permit.
Hi,experts,
We have two different user id say "X" and Y.We want to block releasing authorization of maintenance order and permit for user id "X" and give the same to user id "Y",How we can do it in SAP?Please,give some suggestions on this.Thanks in advance.
rgds
rajibHiii
You can create two seperate Authorization role using PFCG transaction code. Assign it to particular users & control the authorization. Use Following procedure.
1. Transaction code PFCG will take you on screen role creation screen.
2. Give authorization for IW32 transaction code in that block authorization according to business transaction for BFRE. This business operation is made for order release.
For permit there is seperate option is available for permits also.
If you have any issue, pl. be free to ask question.
Regards
Maybe you are looking for
-
Song shows up in playlist on iTunes, but not on the iPod Touch
So I bought a song from iTunes on my iPod Touch, and so it shows up on the "Purchased" playlist, and I can listen to it. So, I sync up to my PC (or my wife's MacBook Pro, doesn't matter) and using iTunes, I add the song to a playlist of my current fa
-
LED resolution diff between t400 and t500
I see on the specs that the LED screen in the T400 has higher resolution that the T500. Is this a typo or is it correct? Why does the 500 or have the higher resolution? Rick
-
Has anyone had a problem connecting to Edge network?
Got my phone yesterday and it worked flawlessly. I drained the battery and charged it over night. So I wake up today and try to see what the weather is going to be. It says error updating, so Im like w t f? So I try to open a webpage(using edge) and
-
Gamecenter server to device issues?
After getting a new iPod touch and restoring the entire thing (every app, picture, video, setting, contact, etc.), some of my gamecenter games (Zombie Highway being one of them) resetting me to no progress. After checking gamecenter, I still have eve
-
When I click on a link for a google search, I get the "Secure Connection Failed" error in Firefox. It states, "Please contact the server administrator or email correspondent and give them the following information: Your certificate contains the same