SCORM compliance from individual learning interactions

Hey Guys,
I'm working on a online learning lesson where the quiz is interlaced in the lesson content
So i'm adding individual quiz components within the lesson, however I'm not able to get a quiz score out of the LMS or dynamically through flash >> QuizTrack.total_correct always = 0 ect...
Are there any rules for working with quiz components in CS3 that I might be breaking?
- I've setup the publishing for SCORM 1.2 tracking
- and ensured 'Knowledge Track' is selected in the component inspector
- all questions have a 'weighted' value
Can individual quiz components be SCORM compliant?

Ideally with SCORM, once you setup the SCORM options in the
lesson, they
should work the same way with any SCORM-compliant LMS. That's
what
spec's should do! Unfortunately, SCORM is young and things
don't always
work out that way...whether an issue with the tool or the LMS
seems
completely variable.
The LMS is what organizes and presents the lesson (in this
case, a
lesson created with Captivate), records whatever SCORM data
the lesson
sends back to it, and generally allows reporting on that
data. There are
many other features an LMS may have, but those are the core
components
(in my experience).
What settings to calibrate? Read up on SCORM, read the CP
help file, go
through these user groups, and trial'n'error...
Ideally, whatever you setup in CP to track, it should send
that data to,
and get that data from, the LMS as needed - depending on what
data
you've setup to record. How the LMS reports on that data
completely
depends on how the LMS is setup. But, ideally, your course
should just
'work' if it's been properly setup.
Hope that helps,
Erik
andrei312 wrote:
> One thing I am unclear about is how Captivate 3
interacts with a SCORM
> compliant Learning Management System. What exactly is
the role of a LMS?...
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips!

Similar Messages

Problem with Button in Learning Interaction

I have created a Flash file with 4 "Fill in the Blank" questions (from the Learning Interactions continued within Flash CS3) at the end. I'm then using the swf file in two different ways. One way simply loads the swf file onto a 'stand-alone' page on my website and it works perfectly.
The other way I want to use it is integrated into a more complicated website where I have a Flash File into which various swf files are loaded when needed. In this version the "Control Button" doesn't change to "Check Answer" and "Reset" as it should and the whole question doesn't work.
The working version is at http://web.me.com/ginneswatsonkelso/New_Chemical_Resources/Name_Isomers_Alkanes.html
Select "4 For You to Try" to go directly to Quiz Questions.
The non-working version is at http://web.me.com/ginneswatsonkelso/New_Reaction_Pathways/New_Reaction_Pathways.html
Go to "Extras" in Menu and select Naming Alkane Isomers, then "4 For You to Try" again.
I'm using ActionScript2 and set for Player 9.

Yes, my original technique was to upload the Parent SWF to a folder and then the HTML widget on my webpage would load the file from that location. As you say, all the daughter swf's had to be uploaded into the folder created for that webpage when iWeb uploads my website to MobileMe. This has worked fine for all my other daughter swf's but (I'm presuming) there is something about the Learning Interaction that doesn't let it work this way.
The other disadvantage of doing it that way is that anytime I tweak the original webpage and iWeb uploads the changes, it recreates the page folder minus all my daughter swf's and I have to upload them manually again.
What I've now done is uploaded all the daughter swf's to the same folder as the Parent and added a full web address to this folder in all my loadMovie commands in the Parent swf. Done this way, the swf with the Learning Interaction works as intended.
Many thanks for taking the time and interest to help.

Learning Interactions not working in Chrome

This is my first time using Captivate (8.01). My problem is that 3 widgets/learning interactions are not working when viewed in Chrome. It is a responsive project. They work fine in Safari.
Would greatly appreciate any information about how I can fix this. Thanks.

Yes. Jeopardy, Process Circle and Millionaire. I did find out (through a nice, long -and helpful -chat with Adobe support) that these interactions will work on the Chrome browser when accessed from an LMS. I needed to send them out to reviewers because I didn't have access to an LMS. I just defaulted and asked them to use a different browser.
Thanks for replying and offering to help.

Using Flash Learning Interactions in Captivate

Hi there,
I am developing a short practice quiz in Captivate, but for
one of the questions I want to use a Flash CS3 learning interaction
(the "Hot Spots" one). I get the Flash file built, import it into
Cpativate, and everything works.
Now for the big question - how do I get Captivate to track
the successful/unsuccessful action from this question in a quiz? I
want to present users with a results page at the end of the
practice quiz, but since this question is not built with a
Captivate question slide (like m/c, t/f, etc.), how can I track the
result and include it on the results slide at the end?
Thanks in advance for any help!
Cheers,
Shawn

Hi J and welcome to our community
There is no way (back door or otherwise) that I'm aware of to
do this. Unless, of course, you mean to use Flash 8 and export the
Flash in a version 6 format.
Hopefully we will see Flash 8 files working just dandy in
Captivate version 2.
Cheers... Rick

Captivate 8: Learning Interactions.

How can I:
1). Add additional options to "Millionaire" like in "Jigsaw". I am working with multiple-choice questions that have 5 options but "Millionaire" only allows 4. Working with "Jigsaw", I can add options but cannot with "Millionaire".
2). Attach images to questions and correct/incorrect boxes in "Millionaire" and "Jigsaw". Some questions have diagrams.
3). Attach audio to questions and correct/incorrect boxes in "Millionaire" and "Jigsaw".
4). Print certificate widget after "Millionaire" and "Jigsaw".

Double post, is also in the Advanced section.
Learning interactions are canned, you cannot change more than what is provided. Create your own interactions if you want to do that.
None of those game learning interactions will take the score from the game itself, score attached to it will be given if the game has been played (even for only a limited time).

Learning interactions and Flash player

I am trying to place a standalone multiple choice learning
interaction on my timeline. I can place it on the stage and see
everything in the component inspector, (only broke apart once!) but
when I test it, it appears that I cannot see any of the UI
components such as the checkbox or radio buttons. Searching this
forum, someone suggested previously that I had to be running Flash
Player 65? I installed Flash Player 9 from this site to ensure I
had the latest and it still does not work. I tried it at work,
where we are running Flash Player 7 and it seems to work fine. Is
it still my Flash Player? Do these interactions ONLY work with a
specific player? If so I need to know so that I can specify that in
the delivery. Thanks.

open the fla in flash and see if there's an flvplayback component on stage. if there is change its size to match your flv. if not, search for .source (as3) or .contentPath (as2). that will lead you to the object that plays the flv and you can assign its size using actioscript .

Oracle iLearning, Flash learning interaction implementation

I am new in iLearning. I am developing contents and assessments for uploading to iLearning. Instead of using iLearning assessment builder, I have used Flash learning interaction (SCORM). I have created several test with Flash learning interaction but i don't know how to upload it to iLearning since it is not only a question bank but also a assessment for enroll. I think the concept in iLearning (question bank and assessment is separated) has slightly difference.
Does anyone can tell me how to do it? or anyone has experience for developing assessment using third-party tools?

You would use the SCORM or AICC import options for this, depending on what tracking method is used with the content.

Windows 8 on Surface Pro - Captivate 8 crashes when I try to add Learning Interactions, very slow

I keep trying to start a blank project and inserting a learning interaction but it keeps crashing. I need this fixed ASAP!!!! I had tried importing a ppt, and forget that. It was corrupted supposedly.
I changed my firewall settings, no help there.
I downloaded elearning assets, no change.
I ran as admin, no change.
Please advise.

I would start with this FAQ Entry first, if you have not done so yet: http://forums.adobe.com/thread/792580?tstart=0
It starts with a checklist for getting PrE set up properly, then moves into tuning up one's system and OS (you have done a lot of that already), and then goes into troubleshooting tips. Note: those tips rather work up quickly in "degree of difficulty," and DO become quite technical, but things like the "Finding Clues" link will give some tools, that might prove useful, like the use of Windows' Event Viewer to track down issues.
One of the first things to look at would be your video driver. I would go to the video card's/chip's mfgr's. Web site, and check for a later driver. Do not trust Windows, or any utility to tell you if you have the latest driver. If there is not a newer video driver, or it will not install properly on your system, be sure to check with the HP Web site, as HP, Dell, Lenovo, and some other mfgrs. will re-package video drivers to suit their specific setup.
One troubleshooting technique, that might prove useful (however, those deleted programs bother me a bit here), would be to create a System Restore Point for now (see Windows Help for doing this with your particular OS version). Then, boot to Safe Mode, and choose an older System Restore Point, from when things did work. This might take some trial-and-error, to get back far enough. Test. At the worst, you will only have lost a few minutes, as you have your new System Restore Point for now, to fall back on.
Good luck,
Hunt

Smart learning interactions

I know that Adobe has a service where you can watch past webinars, where can I go to find out about past webinars on smart learning interactions also I would like to know which smart interactions work with HTML 5 and which do not I'm using Captivate 7

Not sure there were a lot of webinars on interactions. I talked about them at DevLearn in October in a presentation, have also an overview in a table somewhere (not yet public).
All interactions are normally HTML5 compatible (contrary to widgets), but I think there is still a problem with the Jeopardy game? Hope someone from staff will confirm. It has been a while I didn't test that one on HTML5.
Lilybiri

Modify Learning Interactions properties panel

Hi there,
I was wondering if I can modify the parameter panel of a
Learning Interaction component to make it more user-friendly for a
Flash author? For example, I would like to change a single line
textfield to a multi-line textarea. Has anybody tried that and
could provide me with some direction and help?
Thanks,
Dan

Are you trying to assign the value from the array:
SessionArray[0].interaction_ID to your variable qresult?
If so, you're using the wrong operator symbol. "==" is a
comparison operator (it tests to see if something is equal to
something else and returns a "true" or "false")
To assign the value you'd do this: qresult =
SessionArray[0].interaction_ID; (note the single "=")
Then you can load the value of qresult into your text field
in a separate function called from your button event
handler.

CS3 Learning Interaction & Plateau LMS

I created a Flash CS3 Learning Interaction and published it
as AICC to be launched through a Plateau LMS. The quiz launches
correctly but does not pass the score or completion status. Does
anyone know what the Activity ID and Activity Name should be for a
Plateau LMS? I tried it using the Item ID and the Content Object ID
already.
Thanks!

So you are trying to return the value of the text field
qresult?
vcheck.onRelease = function (){
trace (qresult.text);
Dan Smith > adobe community expert
Flash Helps >
http://www.smithmediafusion.com/blog/?cat=11
http://www.dsmith.tv
"Mike@MTS" <[email protected]> wrote in
message
news:g409j5$st8$[email protected]..
> I've reposted this hoping someone can help.
>
> I'm using learning interactions components to create
question and answer
> session at the end of a lesson.
> I need to get at the interaction tracking values for
each Q&A which will
> be
> used elsewhere.
>
> I have found some Macromedia documentation :
>
> "Tracking properties available in the SessionArray
> The property names references standard interaction
tracking values for
> both
> AICC and SCORM LMS. You can retrieve an interaction?s
properties by
> referencing
> its location in the following command:
> SessionArray[n].[property_name]
>
> For example, to reference the interaction_ID value for
interaction #1, you
> would use this command:
> SessionArray[0].interaction_ID
>
> To reference the result value for interaction #2, you
would use this
> command:
> SessionArray[1].result."
>
>
> I am not great with actionscript so can anyone help. I
need to get the
> information to be passed into a text field.
>
>
> Attach Code
>
> stop();
> var qresult:String;
> var vcheck:Button;
>
> qresult="";
>
> vcheck.onRelease = function (){
> trace (SessionArray[0].interaction_ID);
> SessionArray[0].interaction_ID=qresult;
> }
>
>
> All I get is in the qresult text field is 'undefined'.
>
> Can anyone help please.
>

Unable to load any Learning Interaction

When attempting to go to the Learning Interactions menu choice from the Interactions top menu, the window that appears loads blank at first, then some of the learning interactions choices appear, but the window does not scroll down to see more samples, and when I click the insert button attempting to insert any of the choices that finally appear in the window, another small window appears saying "Not a valid widget". I have restarted captivate 8.1 on my Mac O.S. 10.9.5. several times, as well as tried this on a number of projects. Please help!
Thanks,

Which version do you use? Is CP installed on your system, not on a network drive, and are the folders pointing to your CP-files and cache both on your system as well? Are you connected to the WWW, because there are regular updates and your system will try to download them? Do you run Captivate as administrator? Can you find the interactions, they should normally be copied to a Public folder, under 'Adobe\eLearningAssets' but I don't know where it is on Mac (using PC myself).

Learning interaction problem

I have set up an e-learning resource using a quiz template
with some extra frames that I have added. There is a problem with
the drag-and-drop interactions- whenever the user moves onto the
next frame, some (and occasionally all) of the dragged objects from
the previous frame can still be viewed, obscuring the next
interaction. I'm new to Flash so I'd be really grateful if someone
could tell me what I'm doing wrong!
Thanks

Yes, my original technique was to upload the Parent SWF to a folder and then the HTML widget on my webpage would load the file from that location. As you say, all the daughter swf's had to be uploaded into the folder created for that webpage when iWeb uploads my website to MobileMe. This has worked fine for all my other daughter swf's but (I'm presuming) there is something about the Learning Interaction that doesn't let it work this way.
The other disadvantage of doing it that way is that anytime I tweak the original webpage and iWeb uploads the changes, it recreates the page folder minus all my daughter swf's and I have to upload them manually again.
What I've now done is uploaded all the daughter swf's to the same folder as the Parent and added a full web address to this folder in all my loadMovie commands in the Parent swf. Done this way, the swf with the Learning Interaction works as intended.
Many thanks for taking the time and interest to help.

Component Learning Interactions

Anybody familiar to this component and want to help me
out?:-) I am trying to make an online quiz with this, but since I
am norwegian and working with flash 8 (yes, I a about to upgrade to
cs4 in the near future) and the norwegian alphabet has specific
characters...is it possible to change the languag in the component?
Appreciate an answer:-)

Hi Conrad!
As you have no doubt already realized, using the Learning
Interaction templates that are available in Flash MX / MX2004 and 8
will not work at all in Presenter content.
The coding methods conflict while playing back within the
Breeze environment and I
think it has to do with the _dropTarget property as part of
the interaction's codebase. The _dropTarget method is NOT supported
in Breeze, but the hitTest() method IS!
I have written a few drag and drop exercises that do work
within Breeze content, and you have to use the hitTest() method to
accomplish it.
As you already have discovered, the bottom line is that the
learning components were intended to be "stand alone" objects that
could be incorporated into a web page (or even a CD as these
objects are nothing more than swf files). Aside from the fact that
the prebuilt/preconfigured learning objects in flash don't always
work in Breeze, in my mind, the bigger question here is the ability
(or more accurately) the inability to connect these SCO's to an LMS
for tracking. As stand alone objects, they're actually pretty
handy...but not in Breeze.
I realize this doesn't help much with what you're trying to
do, but from my perspective, you're better off creating your own
drag n' drops.
I've got a bunch of examples to share if you'd like to take a
look...just send me a PM or email if you're interested.
Rob
[email protected]

Customize learning interactions

Hello everybody!
I have added some learning interactions directly from the
common library "learning interactions" to my flash project).
I would like to know:
1) how to add a page result with the user's score
2) if I can access learning interaction's properties by
action script (i.e. I have added to the stage a "Fill in the blank"
interaction. Can I set the question dinamically, reading, for
example, a xml file by action script or the only way to do it is
editing manually the component inspector? As a matter of fact I
want to develop the same e-learning project in various languages,
if it is possible to set questions, answers and messages of each
interaction dinamically I will save a lot of work).
Every whitepaper, article, tutorial about it would be very
precious.
Thanks a lot and have a nice day
Stefano

Well,
I have found a solution to the first problem, that is to add
a result page to a project where have been added some learning
interactions directly from the common libraries (instead of using
Quiz Template).
Values about user's answers are stored in the array
SessionArray, so it is possible to do something like this:
var tot:Number=0;
for (i=0,i<SessionArray.length;i++){
if (SessionArray [ i ] .result=="C"){
tot++;
By these code lines you count the amount of user's correct
answers (C is for Correct and W is for Wrong).
Pay attention: for some reason square brackets are truncated
so I had to insert a space between them and array index i.
So long
Stefano

SCORM compliance from individual learning interactions

Similar Messages

Maybe you are looking for